Lost the ability to print:

Hi all;
I just installed ios5 on my wifes ipad2, and suddenly lost the ability to print to our Epson printer-among other things. B4 the "upgrade" all was fine, and now all I can find is "no airprint printer". I've never had one that was an "airprint" printer.
Any ideas?
JP

This is a little tough because there are two possible issues. iOS 5 wouldn't cause a failure for an AirPrint printer but as mentioned it does cause a problem for some AirPrint software running on Macs and PCs.
So one guess is that the update just causes some intermittent problem. Power cycling your printer, iPad and router would likely clear that problem.
Another guess is that you never had AirPrint support in the printer and that one of the Macs was sharing the printer instead. iOS killed that sharing solution and so you now have a problem. Some of the Epson printers shipped without AirPrint and need a firmware update. There's information here:
http://support.epson.net/airprint/fw.html

Similar Messages

I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan

Hi Everybody,
I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan. How do I uninstall the Epson software and start all over again?
nickel_man_65

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

After I installed 10.6.8, my HP Officejet lost the ability to print 2-sided. I installed the latest HP drivers for Snow Leopard, but the 2-sided option is turned off and greyed out.

After I installed 10.6.8, my HP Officejet 7310 lost the ability to print 2-sided. I installed the latest HP drivers for Snow Leopard, the 2-sided option shows up in the print window but is turned off and greyed out. Also the scan function won't let me scan at any density greater than 150 dpi. I have talked to Applecare and to HP tech support and been told "too bad." Any help would be appreciated.

THANK YOU! And who are you? I spent a couple of hours on the phone with Applecare and with HP Tech Support and they couldn't fix what you did in a few words. Many thanks! John

Why have I lost the ability to print pdf files?

All of a sudden I can't print pdf files. The print screen shows a blank file and it prints blank, of course.

This doesn't sound like it is a FornsCentral issue unless you have this problem only with PDF generated from FormsCentral.
Let me know if that is the case. Otherwise you should ask your question on the Acrobat or Reader forum
Acrobat Forum: http://forums.adobe.com/community/acrobat
Reader Forum: http://forums.adobe.com/community/adobe_reader_forums
Gen

With the new version, my dropdowns aren't working and have lost the ability to print documents. I have to use internet explorer to get everything I need.

Having trouble printing documents and using the dropdown features in different software applications.

Firefox 16.0.2 is the last version that works on an Intel Mac with the OS X 10.5 operating system.
* http://download.cdn.mozilla.net/pub/mozilla.org/firefox/releases/16.0.2/mac/
Another possibility is to install the Firefox 10.0.12esr (BuildID=20130103094221) version that has more security updates, but misses features present in Firefox 16 (BuildID=20121024073032).
* http://download.cdn.mozilla.net/pub/mozilla.org/firefox/releases/10.0.12esr/mac/
* http://www.mozilla.org/en-US/firefox/10.0.12/system-requirements/

I have upgraded to iOS 5. Now I have lost the ability to print.

How can I fix this? My printer isn't listed, even though my printer & iPad are using the same wireless network (wi-Fi)

If you press twice on the home button when your phone is locked it will appear.

The sheet I am working on has lost the ability for me to scroll to the first few columns. I can't see the columns but I can cut and paste them so I know they are still there. Has this happened to others

The sheet I am working on has lost the ability for me to scroll to the first few columns. I can't see the columns A & B but if I cut and paste the table to a new sheet, the columns I am missing will travel to the new sheet. I have charts and other stuff related the the original table so I need to figure out why I can only see from column C forward. I tried to "UNHIDE" the columns but the function doesn't seem to recognise that there are columns missing. Has this happened to others and how did you fix it?

I've seen it happen before, or at least it sounds something like what I've seen before. The table somehow gets into the margins of the page and the app doesn't know how to deal with it. Go into Print View and try moving the table away from the left side ofthe page. You might have to change content size or resize the table to get it to correct (then put you can put them back the way you like).

Lost the ability to spell check on all applications

I recently updated my system to Mavericks 10.9.4, since then I have lost the ability for spell checking in all applications. Check spelling while I type is not working and I am unable to check spelling manually through the app menus. Skype, Facebook, Notepad.. you name it, spelling correction functionality is no bueno. Has anyone ever heard of this? I have tried changing languages, booting in safe mode... the only thing I did notice was that the box to check "correct spelling automatically" won't stay checked, but clearly something else is wrong.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

HT2492 ML Dashboard Calendar widget has lost the ability to change the date.

In ML the Dashboard calendar widget has lost the ability to change the day to other days. You can still navigate to different months with the arrow keys, but clicking on any day has no effect. I have not found a keystroke/mouse combination that allows the date to be changed from today's date.
This is a useful function for me, to quickly be able to see what I have scheduled on any day. Now I have to open iCal, which is annoying.

You are correct that there is no way to sort jobs in the print queue window in Snow Leopard. This is to be considered expected behavior. In other words, that's the way the software engineers intend it to work in Snow Leopard. You should provide Apple with feedback as to what you want. You can file a report at: _http://www.apple.com/feedback/macosx.html_.
Matt

I seem to have lost the ability to directly upload a song from Garageband to facebook or e-mail on both my iMac and Macbook. Any suggestions.

I seem to have lost the ability to directly upload a song from Garageband to facebook or e-mail on both my iMac and Macbook. Any suggestions?

Have you repaired permissions and restarted your computer after installing ML? Checked your printer settings in System Preferences?
If Software Update does not list any updated drivers for your model printer, you should go to the printer's manufacturer website and download the drivers from there and/or contact their tech support to determine if your printer is compatible w/ML.
Read the various Knowledge Base ML printing articles. Here are a few to get you started:
OS X Mountain Lion: If the software for your printer can’t be found
OS X Mountain Lion: Troubleshoot a USB printer
OS X Mountain Lion: Troubleshoot an AirPort printer
If none of the above work, post back w/the model of your printer and how it's connected to your computer. USB? Wireless?

When I use FF 4 I have problem with my Intranet user interface, I lost the ability to acces my intranet database? So for now I go back to previous version. I hope that kind of problem can be fix soon.

I usually use FF 3.6 version to download data from my company intranet. With old FF version I can access the intranet easily. But when I upgrade to the FF 4, I lost the ability to customize the variable data I want to collect. It kind of stuck. Usually when I right click I have option what to do. with the new version my option is none. nothing change. It's frustrating. So now, I go back to previous version. You said previous version is vulnerable to phishing or virus or something but still it user friendly for me to access my company data. Please fix that bug and I'll upgrade to the newest version.

I want to add my progress about this problem. I find this problem in IE 9, but it has compatibility view, though not too perfect but quite helpful. Whereas FF 4, from article in support, said it doesn't have one. So, I beg you FF team to accommodate us who still deal with old web design so we still can use this FF 4. Please..please..please. I still believe Firefox is the best browser and I hope FF team also responsive about current problem. I think I don't have any option, but to downgrade FF to 3.6 until someone tell me how to deal with this kind of problem. Thanks.

Lost the ability to download or play songs from iTunes match service ?

Around 24 hours ago lost the ability to download or play songs from iTunes match service. (iPhone and iPad work) But mac and pc doesn't ? Have downloaded iTunes update and have tryed restaring iTunes

Hello, Chris3198.
Thank you for visiting Apple Support Communities.
I see you experiencing issues with iTunes Match on your computers but not on your iOS devices. I would recommend going through the troubleshooting steps in the articles below.
iTunes Store: Troubleshooting iTunes Match
http://support.apple.com/kb/ts4054
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
Jason H.

I've been taking screen shots for years and opening them from my desktiop. Suddenly, today, I've lost the ability to open them. I can right click on the picture and do "quicklook", but that's it. They just won't open. Similary, if I scan an image and sa

I've been taking screen shots for years and opening them from my desktiop. Suddenly, today, I've lost the ability to open them. I can right click on the picture and do "quicklook", but that's it. They just won't open.
Similary, if I scan an image and save it as a PDF file in pictures, I'm suddenly not able to open it either!
Why?

Move the com.apple.screencapture.plist file out of /username/Library/Preferences/ to the Desktop, log out and back in, and try again.
BTW, use the default 10 point setting for text. Your choice just wastes screen space.

TS4268 Help! Probably you have never experienced this, but I have lost the ability to iMessage. When I try to turn on iMessage, it tells me that "an error occurred while trying to turn on iMessage." It's not a huge deal, but people with iPhones can't t

Help!
Probably you have never experienced this, but I have lost the ability to iMessage.
When I try to turn on iMessage, it tells me that "an error occurred while trying to turn on iMessage."
It's not a huge deal, but people with iPhones can't text me back unless they try to re-send after finding out that their message wasn't delivered.
Help!
I think I have gone through every support option available, short of
Scheduling an appointment at the Genius Bar. But I have been to the store three times in the last three weeks.
To solve a different problem, the folks at the store replaced my iPhone 4S.
I came home and loaded my backup onto the new phone. Everything EXCEPT iMessage seems to be working great.
I would really appreciate any feedback...

Help!
Probably you have never experienced this, but I have lost the ability to iMessage.
When I try to turn on iMessage, it tells me that "an error occurred while trying to turn on iMessage."
It's not a huge deal, but people with iPhones can't text me back unless they try to re-send after finding out that their message wasn't delivered.
Help!
I think I have gone through every support option available, short of
Scheduling an appointment at the Genius Bar. But I have been to the store three times in the last three weeks.
To solve a different problem, the folks at the store replaced my iPhone 4S.
I came home and loaded my backup onto the new phone. Everything EXCEPT iMessage seems to be working great.
I would really appreciate any feedback...

I lost the ability to use wifi after the 8.02 update. Is there a way to fix this? I've already tried resetting network. Turned the phone off and on. Nothing is working and now I have to run on just data.

I lost the ability to use wifi after the 8.02 update. Is there a way to fix this? I've already tried resetting network. Turned the phone off and on. Nothing is working and now I have to run on just data.

csdwarf,
So sorry to hear about the trouble with Wi-Fi! Let's get that working the way it should. Could you provide us some more details regarding where this breakdown occurs? Are you having trouble with turning Wi-Fi on or connecting to your Wi-Fi? Are other devices connecting to your Wi-Fi without issue?
BrianP_VZW
Follow Us on Twitter @VZWSupport

Lost the ability to print:

Similar Messages

Maybe you are looking for