Lost the LCD info display on the 7D

I have lost the info display on the rear LCD of the Canon 7D. When I turn the camera on, nothing displays on the LCD, the screen is black. Before when I turned the camera on, it gave me basic information regarding settings, battery life, number of shots available. I no longer have that information. I am not sure if I turned something off somewhere, but I can't seem to get this information back again. I know there are settings on the top LCD, but I would like to see them on the back LCD also. Is there any way I can get this screen to appear again?

Does Live View work? If neither Live View or cycling through the Info button does nothing, then you probably have a dead rear display. (Don't forget, one of the Info button cycles is an off rear display.)

Similar Messages

Can I change where on the screen the "get info" display pops up?

Can I change where on the screen the "get info" display pops up? I have dual 23" cinema displays and the Get Info box always pops up inconveniently on the far, far left. Is there a way to change the default location, more towards the middle, where it would fit better into my work flow?

treetopstudio,
I'm not sure to change the default of Get Info but what you could do is open the Inspector instead it 1 remembers it location when you close it and 2 when you click on another icon in finder changes to that. To open it instead of the get info window Option + Command + i or hold Option and click File show Inspector.
Hope that helps,
Weston

When I try to save, I keep getting the message "The document could not be saved. You don't have permission" - even though I am the Administrator and the Get Info displays "Administrator and (me)".

When I try to save, I keep getting the message "The document could not be saved. You don't have permission" - even though I am the Administrator and the Get Info displays "Administrator" and my_name(me)". Also, when I do a disk permission repair, it always repairs the same applications and files. Last night, I did a disk permission repair twice and both times it took a long time and did the exact same repair both times.

Disk Utility won't repair your home folder. Sounds like your home folder permissions are messed up tho. Try repairing them this way by using Lion Recovery.
1. Restart Lion, and before you hear the chime, hold down the Command and R keys.
2. You’ll be at the Repair Utilities screen. Click the Utilities item in the Menu Bar, then click Terminal.
3. In the Terminal window, type resetpassword and hit Return.
4. The password reset utility window launches, but you’re not going to reset the password. Instead, click on icon for your Mac’s hard drive at the top. From the dropdown below it, select the user account where you’re having issues.
5. At the bottom of the window, you’ll see an area labeled Reset Home Directory Permissions and ACLs. Click the Reset button there.
The reset process takes just a couple of minutes. When it’s done, exit the programs you’ve opened and restart your Mac.
Good luck
RM

Is there a way to open Excell file from the server and display in the UI and save it back on to the

Hello there,
Is there a way to open Excell file from the server and display in the UI and save it back on to the server? (like showing xell file as a datagrid - add rows, columns etc.)

Hi Mike,
Welcome you to the forum.
You may try:
SELECT * FROM MyDBNameHere.dbo.OUSR T0
Thanks,
Gordon

I have about 1000 contacts on my iPhone 4 after syncing with iCloud there are only about 120 contacts on iCloud How can I have the same info on both the iCloud and my iPhone

Hi
I have about 1000 contacts on my iPhone 4 after syncing with iCloud there are only about 120 contacts on iCloud How can I have the same info on both the iCloud and my iPhone

On the iPhone tap Settings > iCloud
Switch Contacts off then back on then reset the device.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.

User Contributed Tips in the Mac Pro Displays and the Mac Pro forum

*The following User Contributed Tips are located in the Mac Pro > Displays and the Mac Pro forum:*
None at this time.
*The following related tips are located in other areas of Apple Discussions:*
a brody - Using a second Mac as a display for a first
http://discussions.apple.com/thread.jspa?threadID=1587927
Publish date: July 7, 2008
See also User Tips Library

You can use the two graphics cards, but it's only useful if you have more than two displays. It won't give you higher speed.

Error while executing the report to display on the web in BI 7.0?

Hi All,
In BI 7.0, Getting Error while executing the report to display on the web?
The error message displayed is:
" Network Access Message : The website cannot be found ".
Source: DNS error.
Why this error is coming.
Wht needs to be done.
Thanks in Advance.

Hi Kishore,
All the configurations are in proper shape.
We need to change any IP adresses or proxy settings in the Internet explorer (Tools -> Internet options -> Connections -> LAN settings -> etc.,)
Do We need to configure any server address for getting the output to display on web pages in BI 7.0.
EP is not configured over here. Is that causing the problem.
Thansk in Advance.

I just purchased a few songs from Itunes and could not edit the information in the Get Info section of the file. It's greyed out. Any ideas? Has ITunes changed and no longer allows editing.

Has ITunes changed its editing feature for songs, etc.? I just purchased a few songs and found that I could not edit them using the "Get Info" feature. The information is greyed out and does not allow editing. Among other things, I usually like to eliminate the word "THE" from group names for easier alphabetizing in my library. Thanks for any help.

Check permissions and ownership of the files. Maybe this helps....
How to Take Ownership and Grant Permissions in Windows Vista

HT5019 I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multipl

I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multiple view.
I am trying to project Pro Presenter on the Epson projector such that I have the detail screen on the macbook and only the screen I want people to see on the projector display. This has not been possible because the arrangement tab on the Display section of the System Preference is not showing. If i tried to search for the arangement, it comes back with the message that there is not other source detected, hence the arrangement tab is not showing.
I have also tried to connect the Epson directly to the Macbook but it still the same result, so its not because it is a wireless connection. Can someone advise me jhow to go around this problem. I have used windows before and it is very easy to extend ptojection on windows, but this system seems to be frustrating to me.
Thanks,
Toks

Hi Toksyb!
You may want to try clearing out the PRAM on your computer. This process is explained through this article:
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Thanks for using the Apple Support Communities!
Cheers,
Braden

I need to change the input level and I can not open the track info pane in the new garageband. Can you help me?

I have tried the help menu. It only shows how to open the track info pane in the old garageband. It shows the info button, which is not in garageband anymore. I need to open the track info pane to change the input level. If there is another way to do this please tell me.

Open the "Smart Controls" for your track, and then press the Info button .
The "record level" slider is at the top of the Info panel below the track heads.

Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Get Info' command in the Finder to ensure the file is unlocked and you have permission to access the file.

I have this massage every time close ps cc
Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder.

You may get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
If FINDER means Mac, read below (and try to give more information when asking a question)
Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0

To run iTunes in 64-bit mooose the "Get Info" command in the File menu, and uncheck the "Open in 32-bit mode" checkbox in the iTunes Info window. but i doesn't have the tick thing plus i redownloaded it a

To run iTunes in 64-bit mode, select the iTunes application in the Finder, choose the “Get Info” command in the File menu, and uncheck the “Open in 32-bit mode” checkbox in the iTunes Info window. but i doesn't have the tick thing plus i redownloaded it again and same message comes up

Have you disclosed the "General" brick in the "Info" panel? Click the disclosure triangle to the left of "General":
What is your iTunes version and MacOS X version?
-- Léónie

How to increase the size of the applet/ form displayed on the bowser

kindly guide me how to increase the size of the applet / forms displayed on the browseri.e the width and length of the forms/applet so that i can display all the controls on the form .
thanks with regards

i changed the value of width and height in formsweb.cfg file in my devsuite_home/forms/server/formsweb.cfg , i am able to see the result when i compile and run the form in devsuite, whereas the same is not reflected when i run the same form in application server.
when i tried to change the value of abbovementioned file in oracle_home /forms/server/formsweb.cfg of the application server file , the file does not have the applet wdth and applet height values. in fact this file does not have any applet information..
pls guide
thanks with regards.

What are the actual dimensions of the new Thunderbolt Display without the stand (e.g., when using a VESA mount)?

I need to use the new Thunderbolt Display without the stand on a VESA mount, but before I order it I need to make sure it will fit height-wise in the allotted space.

The ThunderBolt display specs page has the same sizes listed as the 27" LED Cinema Display specs page (web archive). I just measured my Cinema Display for you and the height of the display itself without the stand is 15 5/8". However, you will need some additional space at the bottom for air flow intake. These displays get hot and need proper ventilation so do not block the vents on the bottom. Also the bottom vents are where the speakers are.
Hope this helps.

Sports Team Editor: How do I get the players to display in the sports theme?

How do I get the players to display in the sports theme video? I entered the team and players using the sports team editor. Then clicked done and update. But when I play the video only the first players profile shows up. I have the rest of the video done, this is the one remaining mystery. Thank you.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Lost the LCD info display on the 7D

Similar Messages

Maybe you are looking for