Lost the right 2 1/2 in. on mac 10.4. screen. what is has to be done to fix screen? Is it worth fixing?
lost the right 2 1/2 in. on mac 10.4.11 screen. What is the cause and the fix? What is the cost of repair?
Run the Apple hardware test to see if it can identify an obvious hardware issue. Find your original gray-faced OS X disks. Insert the one that says 'AHT Version x.x' in small print on the label, and reboot holding the alt/option key. Choose the Apple hardware test, and when prompted, choose the extended test. If you have either of the TechTool programs, they can do similar testing. Does that point out any errors?
Similar Messages
-
hey i just bought this new ipad, am really fond of it, but first time i synchronized it, i did so by using my old windows laptop. now i bought a mac computer and lost the rights to put photos onto my i pad. how am i able to get my rights back and go an putting photos and pictures on my ipad??
i'm not that good at working with computers , so please help me....
LisaWelcome to Apple Communities.
You need to migrate some files to your Mac using Windows Migration Assistant. Migrate your Music folder and the folder with the photos. Then, in your Mac, you will have iTunes as you have in your old computer. After that, open iPhoto and drag the photos to it. Finally, connect your iPad to your Mac and sync it -
Lost the content code for free up gradation of mountain lion. What to do ???
https://discussions.apple.com/thread/4134740
Thread /w same question -
I type in the right password for my ipad but it says its wrong what do i do?
i type in the right password for my iPad but it says its wrong. what do i do?
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software. -
When I plug in my headphones into my imac only the right side plays music. I tried with other headphones and still has the same problem. I tried the headphones with other devices and they work properly. Can anyone help me with my problem please?
Macs have crazy headpne jacks in different models.
So we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4 -
I have a Mac pro(1 free bay) and a mac mini I need to back up both of them (time machine) Is it better to use an external NAS HD or an internal hard drive on my mac pro (mid 2010)
What option has the faster GB/s?Disk drive using native SATA bus interface will allow the drive to copy and always present and ready.
But once you have backup any hourly changes should be smaller and as long as the NAS and your switch should allow enough.
You should always have off line backups and don't rely on just one backup set or just TimeMachine.
WD RED models are designed for RAID and NAS and 7.2k instead of your more standard slower green 5400 rpm green models while still costing less than WD Blacks.
http://www.amazon.com/gp/product/B008JJLW4M/
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
Using Cloning as a Backup Strategy
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.bombich.com/software/updates/ccc-3.5.html
Clone to internal, TimeMachine to NAS is one way to go at it. -
are third party media apps (youtube, grooveshark, etc.) grouped in the muted or unmuted category? Since music and podcast (default apps) DO mute and games DON'T mute I thought it worth asking.
It shows Peter's doing its jobs properly.
Anyway there is no more communication from Sony since awihle. If you can have any news.
Anyway good job Zero! -
I am lost the right way to Re format Ext HD
I have several Ext HD connected to my iMac via USB 2. All the drives were reformatted as FAT , so I could plug them into my Windows laptop. I was told that is the best way; but boy I'm paying a big price it seems that it slows down everytime I have to open, move, delete any files on any Ext HD.
I tried Journal setting but it doesn't get recongized in Windows. I am trying to consolidate all the Ext HD into a TB probably I'll be connecting via firewire. Does anyone has any suggestions
Please answer through the board since I can't get to my mac email
Thanks
thanks
iMac 20" Mac OS X (10.4.8)Hi Andrew
Thanks for the input, no there is nothing flashing. I am a new Mac user after using nothing but Windows. I do like it but somehow Mac lacks a bit of compatability with mainstrema connections stuff.
I saw this comment from someone that purchased an Ext HD, but it doesn't make any sense to me, can you translate it ???See belpow:
Summary: I have been very satisfied with the drive itself so far. The read/write speed is very good in general. I have not tested every port to both Macs and Windows, but here is what I have:
USB 2.0 to windows is very good, to Mac not too bad either (tested at about 15 megaBYTES/sec).
Firewire 400 to Mac is quite good, but Firewire 800 makes this special--27 megaBYTES/sec! observed for a 3.75 GB transferred both to and from drive.
The one caveat I have has nothing to with the drive itself, but with the inability for mac and windows harddrives to play nice with each other, which reduces the usefullness of this kind of drive. The drive is pre-formatted to FAT32 which both mac and windows can read nicely, and can theoretically both be booted off. However, FAT32 doesn't seem to be able to handle a transfer of files bigger than 4 GB (I tried and it kept failing in the middle), so if you have big movie projects (like I do), you will have to reformat it, which is where the problem starts. It possible, with some effort to "hack" the drive to have both an HFS+ (mac format that handles bigger files, but is invisible to windows) and FAT32 (to connect it to windows). However, the drive will then not be bootable, which makes it much less useful for a backup. My solution is to format it to HFS+, and use the program MacDrive to have windows be able to use the disk.
BTW I am not planning to use any of the drives to Boot up my Mac.
Thanks -
Hi,
I'm running 32-bit version of SQL Developer v. 3.2.20.09 build 09.87, and I used the built in context menu (right-clicking from the schema browser) today to copy a table. However, none of the comments copied. When I dug into the PL/SQL that the menu-item is using, I realized that it fails because it doesn't handle single quotes within the comment string.
For example, I have a table named WE_ENROLL_SNAPSHOT that I wanted to copy as WE_ENROLL_SNAPSHOT_V1 (within same schema name)
1. I right-clicked on the object in the schema browser and selected Table > Copy...
2. In the pop-up Copy window, I entered the new table name "WE_ENROLL_SNAPSHOT_V1" and ticked the box for "Include Data" option. -- The PL/SQL that the menu-command is using is in the "SQL" tab of this window. This is what I extracted later for testing the issue after the comments did not copy.
Result: Table and data copied as-expected, but no column or table comments existed.
I examined the PL/SQL block that the pop-up window issued, and saw this:
declare
l_sql varchar2(32767);
c_tab_comment varchar2(32767);
procedure run(p_sql varchar2) as
begin
execute immediate p_sql;
end;
begin
run('create table "BI_ETL".WE_ENROLL_SNAPSHOT_V1 as select * from "BI_ETL"."WE_ENROLL_SNAPSHOT" where '||11||' = 11');
select comments into c_tab_comment from sys.all_TAB_comments where owner = 'BI_ETL' and table_name = 'WE_ENROLL_SNAPSHOT' and comments is not null;
run('comment on table BI_ETL.WE_ENROLL_SNAPSHOT_V1 is '||''''||c_tab_comment||'''');
for tc in (select column_name from sys.all_tab_cols where owner = 'BI_ETL' and table_name = 'WE_ENROLL_SNAPSHOT')
loop
for c in (select comments from sys.all_col_comments where owner = 'BI_ETL' and table_name = 'WE_ENROLL_SNAPSHOT' and column_name=tc.column_name)
loop
run ('comment on column BI_ETL.WE_ENROLL_SNAPSHOT_V1.'||tc.column_name||' is '||''''||c.comments||'''');
end loop;
end loop;
EXCEPTION
WHEN OTHERS THEN NULL;
end;
The string of the table comment on WE_ENROLL_SNAPSHOT is this:
WBIG table of frozen, point-in-time snapshots of Enrolled Students by Category/term/pidm. "Category" is historically, and commonly, our CENSUS snapshot; but, can also describe other frequencies, or categorizations, such as: End-of-Term (EOT), etc. Note: Prior to this table existing, Census-snapshots were stored in SATURN.SNAPREG_ALL. All FALL and SPRING term records prior-to-and-including Spring 2013 ('201230') have been migrated into this table -- EXCEPT a few select prior to Fall 2004 (200410) records where there are duplicates on term/pidm. NO Summer snapshots existed in SNAPREG_ALL, but were queried and stored retroactively (including terms prior to Spring 2013) for the purpose of future on-going year-over-year analysis and comparison.
Note the single quotes in the comment: ... ('201230')
So, in the above PL/SQL line 11 grabs this string into "c_tab_comment", but then line 12 fails because of the single quotes. It doesn't know how to end the string because the single quotes in the string are not "escaped", and this messes up the concatenation on line 12. (So, then no other column comments are created either because the block throws an error, and goes to line 22 for the exception and exits.)
When I modify the above PL/SQL as my own anonymous block like this, it is successful:
declare
c_tab_comment VARCHAR2(32767);
begin
SELECT REPLACE(comments,chr(39),chr(39)||chr(39)) INTO c_tab_comment FROM sys.all_TAB_comments WHERE owner = 'BI_ETL' AND table_name = 'WE_ENROLL_SNAPSHOT' AND comments IS NOT NULL;
EXECUTE IMMEDIATE 'comment on table BI_ETL.WE_ENROLL_SNAPSHOT_V1 is '''||c_tab_comment||'''';
for tc in (select column_name from sys.all_tab_cols where owner = 'BI_ETL' and table_name = 'WE_ENROLL_SNAPSHOT')
loop
for c in (select REPLACE(comments,chr(39),chr(39)||chr(39)) comments from sys.all_col_comments where owner = 'BI_ETL' and table_name = 'WE_ENROLL_SNAPSHOT' and column_name=tc.column_name)
loop
EXECUTE IMMEDIATE 'comment on column BI_ETL.WE_ENROLL_SNAPSHOT_V1.'||tc.column_name||' is '||''''||c.comments||'''';
end loop;
end loop;
EXCEPTION
WHEN OTHERS THEN NULL;
end;
On lines 4 and 8 I wrapped the "comments" from sys.all_tab_comments and sys.all_col_comments with a replace command finding every chr(39) and replacing with chr(39)||chr(39). (On line 8 I also had to alias the wrapped column as "comments" so line 10 would succeed.)
Is this an issue with SQL Developer? Is there any chance that the menu-items can handle single quotes in comment strings? ... And, of course this makes me wonder which other context menu commands in the tool might have a similar issue.
Thoughts?
thanks//jacobPaigeT wrote:
I know about quick drop, but it isn't helpful here. I want to be able to right click on a string or array wire, navigate to the string or array palette, and select the corresponding "Empty?" comparator. In this case, since I do actually know where those functions live, and I'm already using my mouse to right click on the wire, typing ctrl-space to open quick drop and then typing in the function name is actually more work than navigating to it in the palette. It would just be nice to have it on hand in the location I naturally go to look for it the first time.
I don't agree with this work flow. Right hand on mouse, left hand on home keys. Pressing CTRL + Space is done with the left hands, and then you could assign "ea" to "Empty Array" both of which is accessible with the left hand. Darren posted a bunch of great shortcuts for the right handed developer.
https://decibel.ni.com/content/docs/DOC-20453
This is much faster than waiting for any right click menu navigation, even if it is found in the suggested subpalette.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously. -
Hi. Since I downloaded IOS7 I have lost the streaming "triangle" on my iPhone4S and iPad (4th generation). It's still on my original 1st Generation iPad (I haven't updated the IOS) hence I'm certain the problem relates to IOS7. How can I fix this?
Doody1955If you share an Apple ID, both of your phone numbers should be linked to that ID. You should be able to use your phone number as well. My wife, my daughter and I all share an Apple ID for purchases, and we each text from our iOS devices using our own iPhone numbers.
When iOS 6 came out, you were able to link the phone number with your Apple ID to use for Messages and FaceTime. You will need to sign out of messages on all devices and then start the process all over again.
Take a look at this.
iOS and OS X: Link your phone number and Apple ID for use - Support -
Have got a nano 6th generation ipod . the right hand swipe fuction to rerturn to home screen doesnt work, nor does the rotation . Think its been set up wrong but we cant get to the settingsto check, how do we get the ipod to work?
Forgotten Screen-Lock Passcode
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
If y can't make a backup then you will either have to:
- restore from an existing backup
- Contact a data recovery company
- Maybe after restoring via How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official
Then restore via iTunes. The iPod will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
We had to install InDesign CS6 recently on a Windows 8 machine and after using the program successfully for a few days/weeks the user noted that she can no longer open/edit PDFs. I'm wondering if anyone else has had this problem and how I can fix it. If I uninstall and re-install the program will I be able to use my existing license?
InDesign has never been able to open or edit PDFs. Illustrator can do it, after a fashion, but unless the PDF was created in Illustrator, and contain the original Illustrator file information, it's not a great idea.
PDF was designed as an end-format, and is not really intended for further editing. -
I get a notice when trying to sync my iPad. "this iPad cannot be used because the Apple Mobile Device Service is not started".....What is this and how can I fix it? Help please
Here is a YouTube video which should guide you through a solution: http://www.youtube.com/watch?v=VLFAo-FWLxE
-
How do I get my contacts and photos back for my iPhone 4 , after updating to ios5 it loaded my old phones info so I lost contacts messages and photos an video
Hello johnohuk,
Thanks for the question. It sounds like most of your music was purchased from the iTunes Store. If your country supports iTunes in the Cloud, you can download your past purchases using this article:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Thanks,
Matt M. -
Hi,
I have accidently deleted safari from my iphone and can't find it to put it back. I did it ages ago as I didn't know what it was and I was trying to create extra space! Now when I click on a link say in an email, it doesn't come up with a browser. I have looked at the apple site but can only see a download for mac users. Not sure if this is the case because it is preinstalled on the iphone.
Help needed please!
Linda/PhillipTry this...
Reset your Home screen to the default layout:
Choose Settings > General > Reset and tap Reset Home Screen Layout.
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
Maybe you are looking for
-
2010 iMac target display mode with 2013 Mac Pro
I have a 2010 27-inch iMac that I want to use with target display mode for a 2013 Mac Pro. I have a mini display port to mini display port cable connecting them. When I plug the cable in the iMac screen goes black, but eventually reverts back to iMac
-
How to process a transaction where a customer needs an Item on Trial basis?
How to process a transaction where a customer needs an Item on Trial basis. It essentially means that the item should not move to customer's stock. It still has to be the part of inventory valuation. Couple of options i tried out but i did not find t
-
NetApp direct connect to UCS best practices
Folks, I have installed many FlexPods this year but all involved either Nexus 5Ks or 7Ks with vPC. This protects the NFS LUN connections from both network outages or UCSM FIM outages. What is not clear to me is the best practice on connecting a NetAp
-
i had a message that shows my mail box is full, i have deleted all my file but unfortunatly it shows no change on the storage at all
-
Debug form with message control
Hello, I' need debug a form (SE71) when a message is printed. For example, type message ZFRG, transaction ME42, i save the new message but not activing debug (before, i go to se71 and 'utilities' -> Activer Debug) How can i do?, thanks very much