Lost transitions when using, send to, from FCP

Hi,
I just used, send to Motion, on 2 stills from FCPv6 that had a cross fade between them. Once they got to Motion they had lost that cross fade. How do I make FCP send the transition as well?
Best wishes
Michael
Message was edited by: Michael Curtis

I'd set it all up in FCP - straight cuts, to time everything to the music, vo, or whatever, then send it all to Motion, where I'd do the zooms and scans - you need to extend the end of each clip to create overlap for the fade in/fade out behavior, and you need to change the scale interpolation to bezier to match position (which is bezier by default) for perfect starts and stops, but it's faster and easier by far than doing it in FCP - and realtime playback as you work.

Similar Messages

Mail stalls and freezes when using "Send Mail" from Filemaker. HELP!!!!

When I run Send Mail from Filemaker, there seems to be a limit to the number of email addresses Mac Mail can accept for broadcasting the same email to many people. It seems to stall and freeze at around 100 email addresses. Is there a fix for this or a setting that I have overlooked? I need to be able to broadcast mail to hundreds of recipients. Help????

Hi,
This is likely not an issue with FileMaker but with your email provider that prevents you from 'spamming'. You'd need to send your emails in 'batches'. SMTPit might help here.

I am using Mail 5.3 with two separate gmail addresses. One is personal the other is business. When I send emails from the business address, any auto-replies I get COME TO THE PERSONAL INBOX. I imagine that this is a setting? Please help!

I am using Mail 5.3 with two separate gmail addresses.
One is personal the other is business.
When I send emails from the BUSINESS address, any auto-replies/out of office notices I get come to my PERSONAL INBOX.
I imagine that this is a setting? Please help!

Edit the SMTP server list. Add a new one for the business account. Put the correct password and information for it. Give it a description so you will know which server is which. Mke sure the correct server is highlighted in the account selected and check the box to use only that server for that account. Do that for the other account also.

I cannot send anything from FCP X to Compressor

I cannot send anything from FCP X to Compressor. It simply does nothing even after reboot etc..... Anybody have a solution before I'm fired.

Have you tried trashing your preferences?
Unexplained faults like this can often be fixed by clearing out FCP X's preferences (for some reason, they get knotted up from time to time).
Download Digital Rebellion's Preference Manager (free, simple to use, and perfectly safe, both to download and use).
http://www.digitalrebellion.com/prefman/
With Preference Manager, you can backup the Prefs first, then if trashing makes no difference, you can restore all your settings.
If you trash them and don't restore them, you will need to manually restore all your FCP X settings again, so it's a great idea to backup Preferences from time to time when FCP X is working well, then if they get corrupted you can ditch the bad prefs and restore from your (Digital Rebellion) backup.
If you get the App, trash the Compressor prefs while you're at it.
Can't guarantee it, but it's worth a try.
Andy

How do I set up an alias email with Mac Mail, so that my alias shows up when I send email from my Mac Mail account?

I am have an email forwarding service, not an email account, which I want to set up as an alias for Mac Mail so that my email appears in the "from" address when I send messages from Mac Mail. I'm having trouble figuring out what I need to do to set up this configuration. Thanks so much for your help!

There are a couple of ways of doing this. The easiest is probably to just add the secondary address in the Mail.app -> Preferences -> Accounts field.
The specifics of which vary a little based on the OS/Mail.app version you're running, but in Yosemite:
Mail -> Preferences -> Accounts
Select your iCloud account and change the 'Alias' popup menu from your iCloud address to 'custom'.
Doing this enables the 'Email Address' field. In this field you can enter the email address you want to appear in your From header.
If you want to use multiple addresses (e.g. your iCloud address and your other alias), you can enter a comma-separated list of addresses - e.g. '[email protected], [email protected]' and then you'll have a pop-up menu on each new message where you can choose the address to use for each outgoing message. You can also set the default address in Preferences -> Composing -> Send new messages from:

How do I specify the gmail outgoing server if I have multiple gmail accounts in my mail? I have 2 business accounts and when I send mail from one account, it is sent from the other account and the sending email is not from the correct account.

I love my apple email and do not want to use google mail on safari. However, I have 2 gmail accounts set up on apple mail, but when I send mail from one of my gmail accounts (I choose the specific gmail account in the drop down window), it actually goes out as if it is from the other gmail account. I can't have that happen because one is my job, the other is a personal business account and unfortunately, the mail from both gmail accounts want to send through the personal business account. How do I make it send from a specific gmail account? I even tried deleting the accounts and setting them up again hoping I set it up wrong in the first place, but to no avail, it is still doing the same thing except this time I set the job account up first and then the personal business account and now everything goes from the job account! The only good thing is that the incoming messages work properly and they go into the correct inbox. Somebody please fix my outbox!

In Mail Preferences/Accounts/each GMail account, set up the SMTP Outgoing Server for each account separately, going into SMTP name/edit/Advanced and specify the Username of each account. The Outgoing servers must be two different servers, authenticated by the Username and Password of each.
Otherwise, the GMail SMTP server will change the from address to that of the account where the SMTP server was setup.
Ernie

HT4436 Why is my daughter receiving my text messages on her itouch when I send them from my iphone? We are both on icloud so how can I separate the two? Do I need another icould or apple account??

Why is my daughter receiving my text messages on her itouch when I send them from my iphone? We are both on icloud so how can I separate the two? Do I need another icould or apple account??

It's happening because you are using the same Apple ID for iMessage. You don't need to do anything with your iCloud account to fix this. You should create a separate Apple ID for her device to use with iMessage and FaceTime. (You can continue to share the same ID for purchasing from the iTunes and App stores if you wish; it doesn't need to be the same as the ID you use for other services.) Once you've done this, on her device go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with the new ID. Do the same thing in Settings>FaceTime.
Another caution is that if you share and iCloud account with her, any data you both sync with the account such as contacts, will be merged and the merged data will appear on both devices. If you don't want to end up with each other's contacts, calendars, etc. on your devices, you should have separate iCloud accounts to. If you want to make this change, go to Settings>iCloud on her device and tap Delete Account. (This only deletes the account from the device, not from iCloud.) When prompted about what to do with the iCloud data be sure to choose Keep On My iPod. Then set up a new iCloud account with her new ID, turn on iCloud data syncing again, and when prompted choose Merge.

TS3276 I need feedback for the following issue. When I send email from this 27 inch iMac, the computer adds a string of characters in vertical column that represents the QWERTY key board, all alpha numeric characters are included. Yahoo mail, issue only o

Restating my issue / question...
When I send email from this iMac, there is a string of characters assigned. The characters are all the "alpha numeric" characters on the QWERTY key board. This only occurs when email is sent from this iMac. The issue does not manifest when using any other lap top or computer.
Hence, I have ruled out the issue is a yahoo mail matter.
Again, I can access the Yahoo mail account form multiple devices and send email without unintended assignment of character strings, but when I send wmail using this iMac, the issue happens everytime.
Characters are stacked verticaly in a column. It looks as if all characters (except function keys) are included in the string.
Any ideas?
GMc

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; } | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}' | open -f -a TextEdit
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Why it says The email server didn't recognize your username/password combination. when I sending pictures from iPhoto to my e-mail.

why it says The email server didn’t recognize your username/password combination. when I sending pictures from iPhoto to my e-mail.

Have you tried to delete the account from your Preferences and to Re-Enter it? That usually will help.
If not, try to use "Mail.app" as mail client in iPhoto and not iPhoto. Change the the stting in the Preferences > General tab to "Email photos using Mail". This is usually more robust thanthe setting "iPHoto".

Why when I send messages from my iphone to other iphones, they come up green and not blue? I have all the settings on for I message, but my number comes up grey and not Black? Help someone please!

Why when I send messages from my iPhone to other IPhones, they come up green and not blue? I have all the settings on for I message b ut my number comes up grey and not black? Please someone help!

Hi evan191,
Thanks for using Apple Support Communities. This article has some steps you can try if your messages aren't sending as iMessages:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
If you still can't send or receive iMessages
Ensure that iMessage is turned on in Settings > Messages.
To send and receive iMessages, your device must have a valid cellular or Wi-Fi data connection.
iPhone: Troubleshooting Cellular data
iOS: Troubleshooting Wi-Fi networks and connections
iMessage registration validates your Apple ID for use with iMessage. If you are unable to activate iMessage, follow this article.
If an iMessage cannot be sent, it will be resent using SMS or MMS, depending on the content. You can turn this behavior on or off in Settings > Messages > Send As SMS. Carrier messaging rates may apply.
Verify that the Apple ID or phone number is listed in Settings > Messages > Send & Receive.
Cheers,
- Ari

My brother mfc-240c printer just stop printing information when i send it from my computer.

my brother MFC-240c printer just stop printing information when i send it from my computer.

Hello Dethredic!
Is it a usb printer ? Do you use the desired driver for it ?

HT201335 What causes the TV screen to freeze but sound continue on TV when using Air Play from I Phone?

What causes TV screen to freeze but sound continue on TV when using Air Play from I Phone 4?

First try rebooting ATV and router. Beyond that, it's probably something within the network, typically interference.
To get a report of the network go to istumbler (Mac) or netstumbler (PC). Look for signal strength and noise.
If on wifi try ethernet.

How do I set a new account as default in safari when I send emails from a web page

how do I set a new account as default in safari when I send emails from a web page
thanks in advance

In the Composing pane of Mail's preferences window, look for the pop-up menu labeled "Send new messages from." Select the desired account there.
Note, though, that this won't change the behavior when replying to a message... in that case, the reply will be sent from the account that received the message, unless you specify differently at that time.

Why don't I receive iMessages on my iPad when sent to my iPhone? When I send messages from my iPad, they show up on my iPhone, but doesn't hold true the opposite way?

Why don't I receive iMessages on my iPad when sent to my iPhone? When I send messages from my iPad, they show up on my iPhone, but doesn't hold true the opposite way?

Ok. So I figured out that I can add the email address to my iPhone 4s to receive the iMessages sent/received from my iPad. How do I get the messages on my iPad that were sent to my iPhone? Is it possible?

When I send photos from my Iphone to an email address they never arrive. Any thoughts?

When I send photos from my iphone to an email, the email seems to send, but the email never arrives at it's destination. Can someone help me fix this?
Thanks.

Has you email ever worked. Are you receiving an error when you send the mail, or is it just sitting in your outbox? Is it just a single individual that is not receiving your mail? Have you tested sendng mail to another individual whos email address you know is valid?

Lost transitions when using, send to, from FCP

Similar Messages

Maybe you are looking for