Lost trying to create a stop watch

I'm attempting the use the timer class to create a plain stop
watch that counts down from 10 mins.
I can't seem to find any tutorials for AS3. Can someone
provide a link?
Thanks for your assistance.

peggy818 wrote:
… I'm lost and I'm just starting. Not sure I like the new version. …
have a read in the Manual:
http://help.apple.com/imovie/mac/10.0/?lang=en#mov755717b21

Similar Messages

Using Still images to create a stop motion film in imovie

Hi all, I'm trying to create a stop motion film in imovie using photo's I've taken with my camera, I've managed to put it all into the sequence I want, and even put background music on, but for some reason I can't stop imovie, panning in and out on individual photo's/clips of my film, so whereas when i flick through the photo's on my camera, it creates a pretty good stop motion film, but on movie it looks as though I've held everything by hand not using a tripod, making it jaunty and not playing well.
Does anyone know how to make it stop doing this? My friend hasn't been able to stop it from doing it either!
Thanks

but for some reason I can't stop imovie, panning in and out on individual photo's/clips of my film, so whereas when i flick through the photo's on my camera, it creates a pretty good stop motion film, but on movie it looks as though I've held everything by hand not using a tripod, making it jaunty and not playing well.
iMovie '08 installs with the Ken Burns Effects preference selected. When you add a photo, it is automatically added by turning it into a "still frame" sequence of frames at the default length with the KBE applied. To get rid of it make sure your "Project" aspect ratio matches the aspect of your photos. Then select the photo sequence in the "Project" window, select the "Crop" tool, and choose the "Fit" option in the preview window. This will get rid of the KBE. Now all you have to do is select any single frame in your "Project" sequence (or multiple frames if you want to "slow" down the final motion sequence in your project), split the sequence, and then discard the unwanted frames. (You could also use Command-C to temporally "store" your selected frame(s) to memory, discard the entire sequence and then use Command-V to paste the frame(s) in memory back into the project window at the proper location in your "timeline.")

LiveCycle form stop watch

Is it possible to create a stop watch that the form user can start and stop as many times as needed. When finished, the total time recorded by the stop watch would be displayed.
Example:
User starts the stop watch at 08:08:00 stop watch displays 00:00:00
User stops the stop watch at 08:45:10 stop watch displays 00:37:10
User starts the stop watch at 09:15:00 stop watch displays 00:37:10 (when started but shows time accumulating)
User stops the stop watch at 09:30:25 stop watch displays 00:52:35
Total time recorded is displayed 00:52:35
If someone has an example form, I would appreciate your help. I have seen a stop watch in an Acrobat form but do not know how to convert it to LiveCycle.

I understand how to get the current time and the time when the clock is stopped. I also understand how to subtract the numbers and then convert them back to time. I have never used variables. I know where they go and how to create them but do not know how to use them in a script. Is there any chance to could create an example? I need to be able to start and stop the clock several times and end up with the total time recorded.
Does anyone have an example LiveCycle form with a stop watch? Am I the only one who has ever needed this?

Trying to create a new movie. It tells me to name my movie, and the only event choice is the last movie I made. I don't want it there. I'm lost and I'm just starting. Not sure I like the new version. Any help out there?

I'm trying to create a new movie. It tells me to name my movie, and the only event choice in the drop down menu is the last movie I made. IMovie Library is greyed out. I'm lost and I'm just starting. Not sure I like the new version. Any help out there?

peggy818 wrote:
… I'm lost and I'm just starting. Not sure I like the new version. …
have a read in the Manual:
http://help.apple.com/imovie/mac/10.0/?lang=en#mov755717b21

Logical standby stopped when trying to create partitions on primary(Urgent

RDBMS Version: 10.2.0.3
Operating System and Version: Solaris 5.9
Error Number (if applicable): ORA-1119
Product (i.e. SQL*Loader, Import, etc.): Data Guard on RAC
Product Version: 10.2.0.3
logical standby stopped when trying to create partitions on primary(Urgent)
Primary is a 2node RAC ON ASM, we implemented partitions on primar.
Logical standby stopped appling logs.
Below is the alert.log for logical stdby:
Current log# 4 seq# 860 mem# 0: +RT06_DATA/rt06/onlinelog/group_4.477.635601281
Current log# 4 seq# 860 mem# 1: +RECO/rt06/onlinelog/group_4.280.635601287
Fri Oct 19 10:41:34 2007
create tablespace INVACC200740 logging datafile '+OT06_DATA' size 10M AUTOEXTEND ON NEXT 5M MAXSIZE 1000M EXTENT MANAGEMENT LOCAL
Fri Oct 19 10:41:34 2007
ORA-1119 signalled during: create tablespace INVACC200740 logging datafile '+OT06_DATA' size 10M AUTOEXTEND ON NEXT 5M MAXSIZE 1000M EXTENT MANAGEMENT LOCAL...
LOGSTDBY status: ORA-01119: error in creating database file '+OT06_DATA'
ORA-17502: ksfdcre:4 Failed to create file +OT06_DATA
ORA-15001: diskgroup "OT06_DATA" does not exist or is not mounted
ORA-15001: diskgroup "OT06_DATA" does not exist or is not mounted
LOGSTDBY Apply process P004 pid=49 OS id=16403 stopped
Fri Oct 19 10:41:34 2007
Errors in file /u01/app/oracle/admin/RT06/bdump/rt06_lsp0_16387.trc:
ORA-12801: error signaled in parallel query server P004
ORA-01119: error in creating database file '+OT06_DATA'
ORA-17502: ksfdcre:4 Failed to create file +OT06_DATA
ORA-15001: diskgroup "OT06_DATA" does not exist or is not mounted
ORA-15001: diskgroup "OT06_DATA" does not exist or
Here is the trace file info:
/u01/app/oracle/admin/RT06/bdump/rt06_lsp0_16387.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /u01/app/oracle/product/10.2.0
System name: SunOS
Node name: iscsv341.newbreed.com
Release: 5.9
Version: Generic_118558-28
Machine: sun4u
Instance name: RT06
Redo thread mounted by this instance: 1
Oracle process number: 16
Unix process pid: 16387, image: [email protected] (LSP0)
*** 2007-10-19 10:41:34.804
*** SERVICE NAME:(SYS$BACKGROUND) 2007-10-19 10:41:34.802
*** SESSION ID:(1614.205) 2007-10-19 10:41:34.802
knahcapplymain: encountered error=12801
*** 2007-10-19 10:41:34.804
ksedmp: internal or fatal error
ORA-12801: error signaled in parallel query server P004
ORA-01119: error in creating database file '+OT06_DATA'
ORA-17502: ksfdcre:4 Failed to create file +OT06_DATA
ORA-15001: diskgroup "OT06_DATA" does not exist or is not mounted
ORA-15001: diskgroup "OT06_DATA" does not exist or
KNACDMP: *******************************************************
KNACDMP: Dumping apply coordinator's context at 7fffd9e8
KNACDMP: Apply Engine # 0
KNACDMP: Apply Engine name
KNACDMP: Coordinator's Watermarks ------------------------------
KNACDMP: Apply High Watermark = 0x0000.0132b0bc
Sorry our primary database file structure is different from stdby, we used db_file_name_convert in the init.ora, it look like this:
*.db_file_multiblock_read_count=16
*.db_file_name_convert='+OT06_DATA/OT06TSG001/','+RT06_DATA/RT06/','+RECO/OT06TSG001','+RECO/RT06'
*.db_files=2000
*.db_name='OT06'
*.db_recovery_file_dest='+RECO'
Is there any thing wrong in this parameter.
I tried this parameter before for cloning using rman backup. This din't work.
What exactly must be done? for db_file_name_convert to work.
Even in this case i think this is the problem its not converting the location and the logical halts.
help me out.....
let me know if you have any questions.
Thanks Regards
Raghavendra rao Yella.

Hi reega,
Thanks for your reply, our logical stdby has '+RT06_DATA/RT06'
and primary has '+OT06_DATA/OT06TSG001'
so we are using db_file_name_convert init parameter but it doesn't work.
Is there any thing particular steps hiding to use this parameter? as i tried this parameter for rman cloning it din't work, as a workaround i used rman set new name command for clonning.
Let me know if you have any questions.
Thanks in advance.

I am trying to create a PDF document that calculates Gains and Losses in Mutual Funds. The calculation scripts are repetitive from line to line. The scripts work well until I reach the line 32. Script stops calculating...

I am trying to create a PDF document that calculates Gains and Losses in Mutual Funds. The calculation scripts are repetitive from line to line. The scripts work well until I reach the line 32. Although I am using the same script as the fields above in the columm, the script eventually stops calculating and I can't figure out why. Is there a limit of how many calculation scripts you can enter? I will attempt to attach my pdf as soon as I figure out how. Thanks.

For e31 :
var e30 = +getField("e30").value ;
var c31 = +getField("c31").value ;
if ( (e30 !== 0) && (c31 !== 0) ) event.value = e30 + c31 ;
else event.value = "";
for e32 :
var e31 = +getField("e31").value ;
var c32 = +getField("c32").value ;
if ( (e31 !== 0) && (c32 !== 0) ) event.value = e31 + c32 ;
else event.value = "";
for e33 :
var e32 = +getField("e32").value ;
var c33 = +getField("c33").value ;
if ( (e32 !== 0) && (c33 !== 0) ) event.value = e32 + c33 ;
else event.value = "";
Java console doesn't show any error... That's why I am wondering if it's not a limitation issue... or memory issue, because they are maybe too many rows or something....
The c value is not calculated.

Solution to stop error when trying to create a portfolio

Hi all,
I finally found a way to make a portfolio in acrobat pro 9. The problems I was having were explained in the thread titled "Acrobat pro 9 has a stop error when trying to create a portfoloi"
It seems ther is another way to do this, by selecting 'combine' and then 'merge files into a single pdf' rather than 'assemble pdf portfolio'.
The merge option also gives the choice of making a pdf package and does not result in a stop error with authplay.dll.
So much for Adobe support who conuld not tell me this or respond to support requests.
All I have to do now is to remember to not click on 'assemble pdf portfolio' when I want to assemble a pdf portfolio but "merge files into a single pdf" when I want to assemble a pdf portfolio.
I would still like to hear from Adobe why acrobat pro 9 has a stop error with authplay.dll.
I feel a lot happier now.

I read through the pdf wth your emails to/from customer support. I'll have to defer to someone else because it seems you have tried what I would suggest.
If someone else does not respond with a better plan and you are willing to spend a bit more time before writing off Acrobat 9, I would try the process below one last time. (If you are using a CS suite, while authplay.dll is found in each of the directories, it does not appear that the issue extends to the other programs.)
1. Using Add/Remove Programs, uninstall all Adobe Acrobat and Reader software and uninstall the Adobe Flash Player Active X and Adobe Flash Player Plugin. If you have it, uninstall Adobe Air.
2. In C:\Documents and Settings\(your profile name)\Application Data\Adobe, delete the Acrobat and Adobe PDF folders if they still exist.
3. Reinstall only Acrobat 9.
4. From Acrobat, run the updater Help > Check for Updates and install all updates.
5. Verify Adobe Acrobat is now version 9.2: Help > About Adobe Acrobat Pro (If for any reason it is not 9.2, use the update on http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows
6. Test
Message was edited by: Anna Nmty
While searching for a solution, I just saw your post over at acrobatusers.com (http://www.acrobatusers.com/forums/aucbb/viewtopic.php?id=15765). Looks like my advice was largely a duplicate, although your event log indicates Acrobat did not update properly.

Every time I sign into my Macbook, I get an error message from Automator; "The data couldn't be read because it has been corrupted.". I have never created an Automator workflow. How do I find out what Automator is trying to run and stop it?

Every time I sign into my Macbook, I get an error message from Automator; "The data couldn't be read because it has been corrupted.". I have never created an Automator workflow. How do I find out what Automator is trying to run and stop it?

Maybe it's set as a login item:
- System Preferences: Users and Groups:
- Highlight your user account in the left pane/list
- Click "Login" tab at the top.
See if you have an Automater action on the list
- Note, you can select it, then right-click, and can then select "Reveal in Finder". That way you might have an idea what installed it.

HT5137 i tried using the setting icon to reset the prints and icon to a bigger size, thereafter the setting icon lost colore to gray and stopped responding

i tried using the setting icon to reset the prints and icon to a bigger size, thereafter the setting icon lost color to gray and stopped responding.? most of the pop up boxes will also not respond why?

Thanks Winston, restarting my router worked for me too. Seems that somehow the DCHP (maybe due to the Mountain Lion upgrade?) had assigned the same IP address to both the AppleTV and my iMac. The AppleTV stopped appearing as an AirPlay device for my iPhone and Mac, but still the AppleTV had Internet access.
Restarting the router reassigned IPs and without fanfare, the AppleTV is now available to AirPlay.

"Adobe Encore (encore 5.1 in cs 5.5) has stopped working" when trying to create blue ray

Newly installed machine with Windows 7 and Premiere Pros CS5.5. I've googled the error and have reset the preferences and updated the sonic driver. But when I start and create a blue ray project, as it's trying to create it, it gives the error "Adobe Encore has stopped working" and crash's. Any help is extremely appreciated. Thanks

>updated the sonic driver
As far as I know, that was for Version CS4
More information needed for someone to help http://forums.adobe.com/thread/416679
Some specific information that is needed...
Brand/Model Computer (or Brand/Model Motherboard if self-built)
How much system memory you have installed, such as 2Gig or ???
Operating System version, such as Win7 64bit Pro... or whatevevr
-including your security settings, such as are YOU the Administrator
-and have you tried to RIGHT click the program Icon and then select
-the Run as Administrator option (for Windows, not sure about Mac)
Your Firewall settings and brand of anti-virus are you running
Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
-or the brand/model graphics chip if on the motherboard
-and the exact driver version for the above graphics card/chip
-and how much video memory you have on your graphics card
Brand/Model sound card, or sound "chip" name on Motherboard
-and the exact driver version for the above sound card/chip
Size(s) and configuration of your hard drive(s)... example below
-and how much FREE space is available on each drive (in Windows
-you RIGHT click the drive letter while using Windows Explorer
-and then select the Properties option to see used/free space)
Windows Indexing is BAD http://forums.adobe.com/thread/676303
While in Properties, be sure you have drive indexing set OFF
-for the drive, and for all directories, to improve performance
Some/Much of the above are available by going to the Windows
Control Panel and then the Hardware option (Win7 option name)
OR Control Panel--System--Hardware Tab--Device Manager for WinXP
And the EXACT type and size of file that is causing you problems
-for pictures, that includes the camera used and the pixel dimensions
Plus Video-Specific Information http://forums.adobe.com/thread/459220?tstart=0
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Report back with the codec details of your file, use the programs below
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
Also be sure you have legal files
Premiere Import Formats http://help.adobe.com/en_US/premierepro/cs/using/WSd79b3ca3b623cac97fa024001235833a568-800 0.html
Premiere Export Formats http://help.adobe.com/en_US/mediaencoder/cs/using/WS725e431141e7ba651e63e3d1267818bc51-800 0.html
CS5 Encore Files & Formats http://help.adobe.com/en_US/encore/cs/using/WS5C9E1CF8-B5BC-436f-89D3-61DDC02A2C47a.html

I am trying to create an executable vi that will call out another vi and show its front panel in the executable. When I try this I recieve this error message "top level vi (my main vi) was stopped at unknown on the block diagram of (my sub vi)

I am trying to create an executable vi that will call out another vi and show its front panel in the executable. When I try this I recieve this error message "top level vi (my main vi) was stopped at unknown on the block diagram of (my sub vi)

Well the most common way is to enclude the vi's in the build spec either directly in the dependancies that the App builder automatically generates OR by declaring them in the build spec as "additional enclusions" (like you must do for dynamic vi calls in your app.
I have heard rummors about My.app Stuff.vi in a nugget Intaris posted- and I've wanted to dig deaper into Intaris' claims- but have not tried it myself.
If you go down the stuff.vi route Keep us curious guys posted
Jeff

I am trying to create a ringtone, when I right click and and go to get info I can't open anything under options. Itunes is not allowing me to do anything under options including changing the start and stop times. ??

I am trying to create a ringtone, when I right click and and go to get info I can't open anything under options. Itunes is not allowing me to do anything under options including changing the start and stop times. ??

GarageBand '11 - Create an iPhone ringtone - Apple Support

Elements 10 organizer keeps stopping when trying to create a slide program.

When trying to create a slide program Elements 10 Organizers stops working about half way through the selection. How can I correct this problem?

Thanks Lennart for your help...you are the man!
I tried what you said and was able to import my movie into iDVD although I still had trouble writing the DVD (4 more times) as the titles page viewed with the wrong buttons and the sound was out of synch with the movie.
I tried once again from within iMovie and clicked the 'proceed' button instead of 'render and proceed' and this seemed to work okay.
I then went on to create the DVD which worked fantastic.
Thanks for your help which lead me in the right direction.
Julie

HELP!! just finished a 20pages report and when trying to create the table of contest I lost EVERYTHING... there is nothing left of my work. WHY????

HELP!! just finished a 20pages report and when trying to create the table of contest I lost EVERYTHING... there is nothing left of my work. WHY????

Hi Peter,
Yes I'am in 5.2, I did mention it right after.
This is wonderful Peter, great advice. I got to have my latest version before I created my table of contents.
In Pages > Menu > File > Revert
and see what you get.
Peter
Thank you so much!!
Have a wonderful day

Oh no! Not another stop watch question?!?!?!

Hi
This question corresponds to the thread
http://forums.ni.com/t5/LabVIEW/Stopwatch-without-pausing-the-program/m-p/828959
The stopwatch.vi cannot be used as a subVI.
How do I get over this issue?
I essentially want to keep the start/stop boolean control as/is as well as the reset boolean along with the "STOP WATCH" numeric indicator.
Any feedback is greatly appreciated oh Knights of LabVIEW!
A student intern cries out desperately for help!
Attachments:
Stopwatch[3].vi ‏34 KB

Hi tbob thank you again for your reply
Please refer to the attatched VI.
I am trying to build a VI that will monitor the "ageing" of "lamps" in hours. There are two banks A and B, each having 6 Modules, each having 8 lamps each, for a total of 2 * 6 * 8 = 96 lamps.
I essentially want to monitor the ageing of every single lamp. Which is why I believe using arrays would be an efficient way.
Each module will go through a period of ON/OFF power cycles. All the while accumalating the total hours that the lamp was ON. During this time a lamp can fault (much like a fused bulb) and hence the timer will stop.
The total time that the lamp in ON will be recorded and saved on an external file in the hardisk, so even if the LabVIEW program crashes, the data will not be lost. I should also be able to manipulate the external file in case I want to add/remove hours from that lamp.
I hope this clarifies my purpose.
Attachments:
testing whole string.vi ‏46 KB
Lamp Ballast Array subvi.vi ‏12 KB
array of time.vi ‏12 KB

Lost trying to create a stop watch

Similar Messages

Maybe you are looking for