Lost video after exporting audio from mpeg-4

I have some mpeg-4 files of my band and wished to improve the audio. I chose the Export Audio option and yes, managed to create an audio only file but seem to have lost the video. Have I lost it permanently or is it still lurking somewhere? I suspect that I might have to reimport this particular file so having done this how would you recommend splitting the audio and video, editing the audio (I use Logic 9) and then putting them back together? Or is there another option?
Thanks in advance for any help.

You could do this in either iMovie or GarageBand.
I would open a new GarageBand Instrumental Project. Drag your TV show file into GarageBand. Then save the project to an audio only codec such as AAC or MP3.
In iMovie, you would use SHARE/EXPORT TO QUICKTIME and pick an audio only codec.

Similar Messages

Static in entire video after detaching audio from clips

After exporting, I was having some audio/video sync issues with my 1 hour and 38 min movie.
It was suggested that I detach the audio from the clips...so I tried it on my 6 minute preview with good success. I exported the preview and the sync problem was fixed.
So I started detaching the audio to fix the regular 1h 38m movie. I got through most of the clips and then went back to play a certain section of the movie...and I noticed that now there is a bunch of static in the entire movie.
How do I get rid of the static?
This also has seemed to really slow the project down. Anything I try to do on the project and iMovie just tanks.

Thanks for your reply Geoff,
I basically have a soundtrack 3.28 minutes long which I want to be the only noise thats playing throughout my interchanging video clips, so I would like to completley move the audio from the all of the indivdual video clips that I am adding in, I thought the 'detatch audio' button would be the one for this, but as I continuously play back bits of the movie to prefect editing I can still slightly hear the sound from the individual videos that I am adding?
So frustrating, but Im sure thats its something real basic that I am missing.....

Problem when exporting audio from Premiere Pro v4.2.1 into wave 5.1 format

Hello to Adobe experts!
After installing of last updates for Adobe Premiere Pro (v4.2.1) and for Media Encoder (v4.2.0.006) the was a problem:
Now I cannot to export audio from adobe sequence into uncompressed wave format with 5.1 channels settings. Source m2ts video files in sequence are with 5.1 audio.
What I doing:
1) in Premiere I execute "File\Export\Media"
2) Export settings are:
- format: Windows Waveform
- audio codec: Ucompressed
- basic audio settings: 44100Hz, Channels: 5.1, Sample Type 16bit
3) After OK button it opens Adobe Media Encoder.
4) After pressing Start Queue in Adobe Media Encoder there is a message "Error compiling movie. Unknown error"
In earlier versions it worked fine.
Can you help me with this problem?
Alexander

Here are the options, from a sequence with 5.1 master track:
and with Surcode:
Notice that first one does only give stereo as an option. Nothing more. With Surcode it gives you 5.1 sound.

How do I stop Firefox from playing video after I navigate from the page or leave Firefox?

Simple and annoying. . Extremely frustrating issue with Firefox for Android. ..
I watch a YouTube video or any flash video. . And after I hit play, the ONLY way to stop it is to hit pause or let it play to the end or close the tab. .
It will NOT automatically stop if I open another tab. or if I navigate from Firefox. .
I feel this is a very basic feature. Did I set something up that was wrong?
Can I ask two questions?
I have another extremely annoying and frustrating problem with Firefox for Android.
The "top" (if you pull down the tabs) search bar DOES NOT allow my stock Samsung keyboard to auto space. . Thus instead of typing
"How do I stop Firefox from playing video after I navigate from the page or leave Firefox?"
I'll type in
"HowdoIstopFirefoxfromplayingvideoafterInavigatefromthepageorleaveFirefox?"
Unless I manually got the space bar.
Using a recently factory data reset Samsung Galaxy s4 active.. android 4.2.2 and stock Samsung keyboard ... Firefox 34.0.1
Thanks in advanced.
Ps
I was a hardcore xscope user for years and just recently gave in to Firefox when i lost all my bookmarks due to a forced factory data reset. .

I'm using a different keyboard which works fine in the most top search bar...
I cannot believe that it's not a feature.
What if I was watching a video and wanted to shut it off quickly? I'll have to hit back? Wait for the previous screen to load then hit the power button?
Please tell me that feature ids soon to come

In v.11, how can I capture video but not audio from a camera?

In v.11, how can I capture video but not audio from a camera?

Rodney
I see what you mean....Premiere Elements 10 appears to be the last version that had options for the user to select Capture Video and/or Audio in the its Capture Window.
If you are doing DV data capture firewire into the Premiere Elements 11 Capture Windows and want a final file without audio and you cannot do this at the camera level, then consider....
1. Do the Capture "to the Timeline" - video linked to audio result on the project's Video Track 1
a. Right click the Timeline DV AVl and select Delete Audio and then edit accordingly.
or
b. Import the DV AVI but, when you go to export it, in the export settings, remove the check mark next to Audio so that the export contains only the video portion.
Publish+Share/Computer/AVI with Presets = DV NTSC Standard
Please let us know if any of that worked for you.
Thank you.
ATR

Pro Tools 7.4 can´t mute audio from mpeg 1

Well, like we sad, pro tools use quick time to play video files.
I work with dubbling and a new problem appeard after update my iTunes and quicktime to 8.11 and 7.6
someone knows about that?
video cant mute audio from file, before update, I choose import or not audio from video file and all controls was maded by pro tools, simple mute the audio channel, if I had imported that...
well, now I can´t mute anything, I use another audio file, not the audio muxed in video, and after the update I can´t use like this way.
before anything, only video was played by quick time,
and now? what changes?
I turn back to quick time 7.1 and everything is fine.

I got the same problem... the same Pro tools version, the same quicktime version and I work in dubbing too!!!. Because I dont want to turn back my quicktime I decide to upgrade my quicktime to 7.6.2 and problem solved!
Good Luck

Why i cant import back my photo video after export to pc?it will state cant sync and open itunes.

Why i cant import back my photo video after export to pc?it will state cant sync and open itunes.

Hey Bakak,
Thank you for using Apple Support Communities.
I understand that you keep getting a message to authorize your computer when trying to transfer applications to your iPhone. Here is an article on things that may cause this. I suspect that the section "Authorize using the correct account name" may be most relevant. It is possible that you have multiple Apple IDs and iTunes accounts.
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases - Apple Support
Regards,
Jeff D.

How do I make space on iTunes for photos after exporting photos from iPhoto on ipad.

How do I make space on iTunes for photos after exporting photos from iPhoto on iPad?

How do I make space on iTunes for photos after exporting them to my PC from iPhoto on my iPad? I received an error message saying I had no more space available to export.

No Audio Playback in Music Videos that were converted from MPEG to MPEG-4

Friends -
I am using iTunes as the default player for all types of audio files. I have not downloaded any supplemental video or audio Codec files (yet). Windows Media Player (11.0.6001.7000) is my default player for videos. When I recently converted a batch of old music videos from MPEG format to MPEG-4 format, I lost the audio playback on the converted files when trying to play back using iTunes. Audio works fine on the original MPEG files from iTunes. After syncing my Video iPod, the video playback is fine on the MPEG-4 files, but there is still no audio. Any suggestions?

Try using MPEG Streamclip to convert the videos; more information on this issue is available in this article.
(31407)

Poor quality on movie after exporting it from Premiere Pro CS5.5

Hi!
As a part of my bachelor thesis in industrial engineering, I am making an animation that shows how different types of water turbines work.
The animation it self, I've created in a program called Autodesk Inventor. From Inventor I get an uncompressed video. This video is usually not possible to open directly, but when I convert this with FreeMake video converter, it works
Conversion in FreeMake:
From:
RAWVIDEO
1280 * 720
16:9
663,554 Kbps
30 fps
To:
. Avi, mpeg4
1280 * 720
16:9
3283Kbps
30fps
The video looks great now, but now when i have finished editing the film in Adobe Premiere Pro CS5.5 and exported it, the lines are very blurred and bad. I've attached a picture showing what I mean. I have tried many different settings in Premiere, but i cannot get it any better.
The picture on the left is after exporting, the image on the right is after converting it in FreeMake Video Converter.
Have tried with the flicker removal, but with poor results.
Does anyone have any tips on what I can do?

Thank you for the warm welcome
Yes, the video from autodesk is uncompressed avi. These files are impossible to import in Premiere, and i cant open them in either VLC or WMPlayer.
After a conversion with FreeMake VideoConverter they are possible to import, and they look very good in VLC.
My Sequence settings are:
Editing mode: HDV 720p
Timebase: 29.97 frames/second
Video:
Frame size: 1280*720
Pixel Aspect ratio: Square Pixels (1.0)
Fields: No fields (progressive scan)
Display format: 30fps Drop-Frame Timecode
Audio:
Sample Rate 48000Hz
Display format: Audio samples
Video Previews
Preview File format: I-Frame Only MPEG
Codec: MPEG I-frame
With: 1280
Height: 720
Maximum bit depth and Maximum render quality is checked.
I have tried with a variety of export settings, but my current ones are:
Output:
Format: Quicktime
Video Codec: H.264
1280*720, 29,97 fps, Progressive, Quality 100, 48000Hz, Stereo, H.264
Aspect: Square Pixels
Render at maximum depth
Depth: 24bit
Use maximum render quality.
One thing I find quite strange is that i have to short clips at the beginning, which both seem fine.

Black video after exporting sequence in FCP7 - help please!

hello,
So i'm not doing anything new - i've edited my clips as usual, settings are all as usual, but after i export the finished sequence and try to play it back, all i get is a black screen, with audio, for the entire duration of the sequence.
in the canvas it plays back fine, theres nothing to render, i've tried both with H.264 and Apple prores 422 HQ and nothing, i have tried to export as QT and also using QT conversion, checked the video settings there, all good, the video is rendered, also i checked the video processing in settings, used both render in RGB and render in 8 bit YUV, but no luck.
and i dont think it has to do with in and out points because the black video I get IS the duration of the audio, and the whole sequence for the matter.
The only thing I am wondering about is that I added some png files to make "gifs" over the video - I exported this same video BEFORE adding the pngs and everything was fine, but it is after adding these still images that the whole video goes black after exporting. But I have done similar projects before, with the same type of files, and I have never gotten this problem.
note; there are only a few of these still images scattered over the sequence, the majority of the video doesnt have these pngs over, but it is the whole of the video that goes black after exporting.
Can someone help me please, i dont know what else to give a go at and i cant find answers to my problem online!
many thanks.

Could be your sequence is corrupt. Create a new sequence with the same settings and copy everything from the old sequence to the new sequence.
If you need help with this post back.

Detaching and exporting audio from iMovie

I know one can 'detach' audio from video in iMovie and move the audio aropund, but is it possible to copy the audio, and import it into iTunes?
Here's the problem: I record my band rehearsing with a flip video camera and run the footage into iMovie, which, naturally, recognises the audio separately. So there should be a way of exporting the audio to iTunes so it might be playable through an iPod without having to go to all the trouble of burning a DVD... shouldn't there?

I have the same question as the above user. I "shared" my iMovie project via QuickTime, saving it as an AIFF file. But GarageBand will not import or open an AIF file. Now what?

Can't export audio from FCP to Soundtrack Pro

I'm running FCP 5.0.2 and have Soundtrack Pro 1.0. I'm trying to export audio tracks from a long FCP project I'm working on to ST Pro to clean them up. As shown in Apple's online demo videos, I want to export an audio track and then remove 'pops' and do noise reduction, etc. In FCP I right click the audio track I want and go down to 'Send To' but the option for "Soundtrack Pro Audio File Project" is grayed out and I can't click it.
If I unlink the tracks and then right click the audio track and 'Send To', the "Soundtrack Pro Audio File Project" isn't grayed out and looks like it would work. But that is only highlighting one audio track, not the other stereo track and not the video track. In the demo video all three were highlighted but when I relink all tracks and try to 'Send To' I get the grayed out "Soundtrack Pro Audio File Project" again.
Is there something I need to do or a step I'm missing.

You might be onto something Randy. I noticed in the Timeline if I tried to send an imported .AIF music clip to 'Soundtrack Pro Audio Project' it would allow it and the option wasn't grayed out. So I looked in my Browser window and checked out the file attributes to every clip which are listed to the right of the names. Sure enough, under the AUDIO column the .AIF music files are listed as '1 Stereo' and the rest of my captured video clips are listed in the AUDIO column as '2 Mono'.
So was there a setting for me to choose during Log and Capture that would have made them '1 Stereo' as opposed to '2 Mono'? Or is this a preference setting somewhere to change that for next time? They were recorded on my camera in stereo I'm pretty sure.
Now in terms of the massive project I've already captured and edited, should I be able to export these mono tracks individualy and fix them as needed? When I click the 'Send to' 'Soundtrack Pro Audio Project File' for these single mono tracks it asks me to 'Save' the file somewhere, is there a proper place to do this or just anywhere on the HD?
Thanks

Shaky Video after export

Hello. I've posted on this before, but havent quite found my answer.
I have video with some motion in it that looks shaky when I burn it to DVD. Someone suggested that I try adding the De-Interlace filter to correct it, but that doesnt seem to be it. I can watch the video from FCE on a TV going thru my camera and it looks fine (with or without the De-interlace filter). But when I export the video as a self contained movie, then pull it in to toast, and burn a DVD, the motion looks bad on the DVD. I also tried going thru iDVD, and there it looked even worse.
This problem is new to me. I've had video with motion before and didnt have this issue.
Any ideas????
Thanks!

I also read your earlier posts on this topic.
From your description I'd exclude de-interlacing and the field dominance problem: you detect these issues before burning if you Print to Video or playback through the firewire connection to a interlaced TV. And you did that.
So export might be the problem. Let me however suggest a test to check if the Export process from FCE or the burning process by Toast or iDVD is the issue.
After export you could try to open the exported .mov (with Export/QuickTime Movie !) using QT Pro, open the property window (cmd-J), select the video track, open the view settings (or something alike, I have the Italian version...) and check High Quality. Then in the main window if you go through the shaky part frame by frame (right arrow) you should see how each frame looks:
- If a frame has a comb effect (due to the fact that its 2 fields have different timing) that's not necessarily bad: what you see is interlacing, that should be correctly handled by the playback device (whether through firewire from FCE or when recorded on DVD).
- But if frames jump back and forth, then you might have a field dominance problem.
If interlacing or field dominance is a problem, however as I said above, you should see it also when you watch the movie connected to a TV.
To cross check, in FCE you can set the canvas window to 100% (no more e no less) and repeat the frame by frame test I suggest above in QT Pro: if the behaviour is the same the problem is in the use of Toast or iDVD, if they behave differently in FCE (better) and QT (worse), then Export is the culprit.
This doesn't solve your issue, but it might help in understand it.
I hope I did not confuse your ideas...
Piero

Is there a way to export audio from iMovies?

I have extracted audio from a video clip that I wish to put into my iTunes library. I was wondering if there is an easy way to do this?
Many thanks.

One way is to drag the extracted audio clip onto your desktop. Then open iTunes and import it in from the file menu.

Lost video after exporting audio from mpeg-4

Similar Messages

Maybe you are looking for