Lost Video, Mouse now Ensoniq ES1371 PCI 128 not work
My sister's computer recently had an unknown breakdown. It is 600mhz with onboard sound running on Windows 98SE. She lost her video driver, mouse driver, and sound driver. I was able to eventually get everything back but the sound. I assumed that the onboard sound was corrupt, so I purchased an Ensoniq ES37 PCI 28 and installed it. It doesn't work either. Before installing it I tried disabling the onboard in Bios and uninstalling all the related sound items in device manager, but that didn't work. In device manager it says that all the drivers are working properly and there are no conflicts. DirectX Diagnostics says that there is no audio driver installed. Windows Media Player says something like "Drivers working properly, but there is an unknown problem with the audio device. Check to make sure the device is properly connected." These were the same error messages I was getting for the onboard sound too. I would really appreciate any help on this. I have been working on it for weeks without hope. Please let me know any information you need to know that might help. Thanks.
Yes I disabled the onboard sound and it wasnt an IRQ problem, I found out the Delta L board is just totally incompatible with Audigy 2 and I am guessing the same problem with my lucent modem, I returned the motheboard *cries* and got a Shuttle MN135N which has worked like wonders =)
Similar Messages
-
i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???
Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?
-
I updated to Yosemite, now my laptop keyboard does not work in MS Word for Mac. Help!
I updated to Yosemite, now my laptop keyboard does not work in MS Word for Mac. Help! Any suggestions for fixing this?
Did you ever get a solution to your problem? Because I am having the same problem. I was actually in the middle of using Word when the keyboard stopped working. But it works in other apps, including in Excel.
Thing is that my laptop just got back from Apple for repairs and they replaced everything but the display - including the hard drive.
So not only do I have plenty of hard drive space, but it should be virus and error free otherwise.
I have only installed a few programs and redownloaded some of my files from places like Dropbox, but otherwise is essentially a new system.
Oh - and it came with Yosemite, so I did not upgrade to Yosemite and still Word doesn't work.
I've always had trouble getting Word to play nice with my Mac but that was also with the old, full hard drive.
This is a fresh install. And since I lost all my files, I only had like 1 old file I have downloaded from email and accessed and was in the process of
creating a new file when it crashed. I got no error, the keyboard just stopped working (to type). I also cannot even get Word > Preferences to even open,
so it is completely unresponsive.
I did a Google search and under the Microsoft communities two suggestions to that person were that there may be multiple copies installed -
I have only the one - and that one is in the wrong place - again, I only have the one and it installed to the Hard drive (visible in Launchpad / Apps).
Another suggestion was that there was some problem with the updates. I ran updates and they installed fine. That helper suggested that the user
may have had different updates that worked for the other Office apps (Excel, PPT etc.) but not Word and that was at least part, if not all of his problem,
but all my Office apps show the same update version 12.3.6, so that cannot be the issue with me.
I've not yet tried uninstalling and reinstalling, but as I got no errors on the original install or updates, I'm not sure if that would fix it.
I've found that Mac just doesn't play nice with some programs at all.
And even though I have a factory installed version of Yosemite on a new, fresh hard drive, even when I booted up, my iPhoto app (which is empty) crashed. I am not sure if my iPhone or iPad was charging at the time, but I don't think so. iPhoto that I still have not even used has crashed several more times since, most notably when plugging in my iPhone / iPad to charge, namely when I declined to upload photos (by default) to DropBox. That may not be related at all, but thus far seems the only other problem I have encountered until this Word problem.
I'm on a MacBook Pro, Sept. 2009, running OS X Yosemite 10.10.1 factory installed from Apple repairs running Office: 2008 for Mac (Home and Student edition).
Please advise if you found a resolution and what it was.
Thanks -
I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?
The sound seems very faint but can here static on playback.
-
Installed Adobe Photoshop CS6 on MacBook Pro OS 10.7.5, now my DVD player does not work. Ideas?
I installed Adobe Photoshop CS6 on MacBook Pro, OS 10.7.5. Now my DVD player will not work. Any ideas?
Problem solved. Yes, it was a coincidence. The problem had to do with my DVD preferences, not the Adobe installation. Thanks for your reply.
-
I just updated to the new software and now my app Store is not working It is just a white blank page
I just updated the new software and now my app store will not work I have shut it down and opened up again and nothing just a blank white page ?
I'm having a similar problem.
New iPad with iOS6 just downloaded.
I cannot purchase any new items from the new Apple Store now!
It keeps asking me to fill in CC details, asking for security number, but stays red when i fill in the 3 numerals and when I click done I get a Time Out message.
This is not good Apple!!
Looks as if I will have to use my iPad One to purchase from the Apple Store. -
my bluetooth says 'Not Available' how do i get it to work again. I have restarted the computer several times and have replaced the batteries in both the keyboard and mouse and yet it still is not working! please help
I have had the same problem. It was cured by turning computer off and/or restarting it. I am not sure if once was enough. I think shutting down must cut out whatever it is that blocks bluetooth. Good luck
-
Why does my apple TV say it needs hdcp compatibility. It never said that before. Now my apple tv is not working.
Hello Rickpoulette,
The following article provides further information and could very well help get your Apple TV and your television cooperating again.
If HDCP authentication does not succeed, you may see one of the following symptoms:
A message may appear on your television stating "This content requires HDCP for playback. HDCP isn't supported by your HDMI connection."
You may see periodic bands of static, or full screen static, flashing across your TV screen.
If you are experiencing either of the symptoms above, try playing the same content again for at least another 10 seconds. If the issue persists, try the following steps until the issue is resolved:
Connect your Apple TV (2nd generation) directly to your HDTV using an HDMI cable.
Set your Apple TV and HDTV to off or sleep mode
From the Apple TV interface, select: Settings -> Sleep Now.
Turn off your TV and wait for about 10 seconds.
Turn your TV back on.
Press the Select button on your Apple TV remote to wake your Apple TV.
Some HDTVs may need a firmware update. Consult your TV manufacturer's user manual or online support pages for additional information about how to update your TV's firmware.
If available, try using a different HDMI to HDMI cable, such as an Apple HDMI to HDMI cable, directly between your Apple TV (2nd generation) and 720p HDCP-compatible HDTV.
Apple TV (2nd generation): About Apple TV and HDCP
http://support.apple.com/kb/HT4428
Cheers,
Allen -
Videos (eg, YouTube, New York Times) do not work on my Retina Display MacBook Pro. There is sound but only empty space where the video should be. Help?
Did you install Flash Player?
http://get.adobe.com/flashplayer/ -
I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless. They did before hooking up the iMac. I am using a Netgear N300 router. Also my Netgear ethernet/homeplug for wireless TV internet no longer works. Any ideas? I have tried unplugging, restarting, and resetting. No luck! Thanks!
You should probalby contact Netgear
-
Hi my keyboard is not working I took off the bottom case to change it prior my keyboard was fine and after just the power key worked. I checked everything no portions were bent and it plugged in good. I tried to turn it on this morning and now the power key doors not work??
Back up all data.
Triple-click anywhere in the line below to select it:
pmset -g assertions
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
Post any lines of output that appear below what you entered — the text, please, not a screenshot. -
My daughter down loaded the new 6.0 software and now her home button does not work. Tried reseting to original settings and reset the operating software. Any ideas?
Try:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
I had 2 MobileMe email addresses, but only went thru iCloud process with one (my main address). Now the secondary address is not working with iCloud. Did I have to go thru the process with each address? Can I still get that secondary address to work with iCloud?
It was totally separate. I just now went back to a previous email from Apple to that secondary address which urged me to transition to iCloud. I followed the link and it prompted me thru the process and the address is now able to send/receive emails. Thanks.
-
I had to erase my hard drive and then reinstall everything back from my passport external hard drive. Now my iPhoto edit is not working. I get a blank screen when I want to edit. The photos show up in the library but I cannot edit them. Help?
There are several possible causes for the Black Screen issue
*1. Permissions in the Library* : Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
*2. Minor Database corruption*: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
*3. A Damaged Photo*: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
*4. A corrupted iPhoto Cache*: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
*5. A corrupted preference file*: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Regards
TD -
I had an iphone 4s and it worked nice with facetime and imessage using my phone number but it was stolen on December so I buy a new iphone 4s using the same cellphone number but now imessage and facetime does not work with my number, it only works with my apple ID. Please Help me I speak Spanish so if my English is not ok I´m sorry about it.
Do you think that apple has to reset in their database of the old serial number attached with my phone number and that’s why I can´t activate imessage and facetime with my number in the new iphone 4s??I understand all of this Meg; that is why I bought an Iphone; but never expected my phone not even give a at least a 24 or even 12 hours....I work 12 hour shifts and also would expect to have to charge each night but not twice a day or more. I am not always somewhere I can charge my phone.
Your points are true; however it doesn't help me......
Maybe you are looking for
-
I have a laptop and want to connect it to a tv. I have an external microphone connected to the laptop also. I want to hear my voice in my tv speakers when I speak. How can I make that happen?
-
Building Odata service for Purchase Requisition
Hi Experts, I have a requirement where I need to build a workflow approval service for Purchase requisition. I want to build this service using the BOR/RFC option for itemwise approval of PR. There are 2 BAPI's BAPI_REQUISITION_GETDETAIL and BAPI_PR_
-
Need help on OCI_NONBLOCKING_MODE
Hello all, I set the server handle in OCI_NONBLOCKING_MODE. When I ran OCIStmtExecute, I start checking the status returned by OCIStmtExecute, After around 50 loops of checking, OCIStmtExecute returned OCI_SUCCESS instead of OCIStmtExecute. I used OC
-
I enter data on a State Health website, which requires that I change my password on a regular basis. I tried to login with the new password, and called the website's help desk for help, when I was unsuccessful. They said it was because Firefox was re
-
What are the artifacts that need to get into Metadat store?
Hi Can some one let me know what are the artifacts (WSDL, XSD...) that need to be stored in MDS? I was of the impression that only the artifacts of the re-used services or the design time artifacts of a service that need to be used by another service