Lost video preview when upgarding to 6.05

Just upgraded from OSX10.4 to 10.5 and then had to upgrade FCP from 6.03 to 6.05 to get it to work.
So now I have lost access to my second monitor under View > Video Playback, the usual list of output options is gone and just replaced with the word NONE!
Help.
Kevin

I used to have an avid. At the time, Avid controlled both the hardware and software (you bought a turnkey system) yet updates would often create problems on some avids yet not on others. Often these problems would be traced to a specific run of a hardware card. And avid charged (if I remember correctly) about $3000 dollars a year for just software updates. I'm not denying it would be nice of updates worked flawlessly, but it's never been that way AFAIK on any system (Avid, FCP, Media 100, Apple, Windows...).
But let's try and solve the problem, rather than argue of things that we'll probably never agree about (as satisfying as that may be).
Try creating a new user account and see if that makes any difference. Try experimenting with the number of colors and resolution for the 2nd monitor in the display preferences.

Similar Messages

There is no video preview when using a Final Cut Pro X project as my source.

When I send my FCPX project to Compressor 4 there is no video preview in the preview window. I have the source selected from the dropdown preview settings but the screen is black with no sound, even though the timecode is correct. Any suggestions? Thanks in advance.

If you export (command e) as a QT movie, then bring that into Compressor as the source file, can you preview it?
Russ

Enabling small video preview when video calling on...

Hi everyone, I'm new to windows 8.1, but am familiar with using skype. I was wondering if anyone could help resolve my problem.
When video calling my friend, I exit the skype window and want to do other things while chatting and want to have a small skype window (video preview) of the person I'm chatting with. I had this on my old computer (Windows 7) but can't seem to find the setting for this on Windows 8.1. If anyone can help me locate this setting, and help me out, please let me know.

Have you tried to install Skype desktop version?
http://www.skype.com/en/download-skype/
See also this:
https://support.skype.com/en/faq/FA12162/how-do-i-get-the-desktop-version-of-skype-windows-8-or-abo...

No Video Preview When Capturing DV Video.

I have looked through the forums, scoured the internet, and even worked with Adobe technical support to no avail. I am using a Canon ZR80 to transfer some of my older home movies from DV tapes to my PC. Adobe Premiere Pro captures audio and video just fine, but I can not watch the video as it captures. This is NOT HD video so PP should let me preview it. Here's my system:
Windows 8 x64
Intel i7-3930K 6 core processor @3.20 GHz
32GB RAM
Nvidia GeForce GTX 560 ti
Directx 11
I have tried using legacy FireWire drivers as many have suggested with no effect. I have tried it on PP 5.5, 6.0 and CC all do the same thing. I have tried 6 different video card drivers. I even did a clean install of Windows 8. I have dual monitors and read somewhere to remove one, tried that no help. Worked with Adobe support for 2 days till we got to the point that he said I "should just get a refund".
I really don't want to give up on pp for such a minor issue, but I also don't want to keep paying $23 a month for software that is not 100%.
If ANYBODY has ANY ideas, I would greatly appreciate it!

I also don't want to keep paying $23 a month for software that is not 100%.
Software as complex as Premiere Pro will never be 100% bug free.
I'm also inclined to believe this is more of a system issue than a PP issue. I don't recall other reports of this nature, and it works fine on my own system.
The only other thing I can think of to suggest is another FireWire port, possibly by adding a FireWire card to the system. I've read that the chip makes a difference, so research over in the Hardware forum.

No video Preview During Capture

Here is the scoop:
Adobe Premeire CS5
Windows 7 64bit
Canon XL2
Capturing DV NOT HDV
Canon standard device control as there is no preset listed for the XL2
Video and audio actually captures fine. I can hear audio during capture but cannot see any video.
I know there is no video preview when capturing HDV but I am capturing DV.
Again this is CS5 NOT 5.5 so .dll fix is not an option
Thanks in advance.

FIXED!
Heres how it went:
Went to Device Manager and let windows look for an updated driver for my Graphics Card (Radeon HD 4200). Windows said the most current driver was installed. It was NOT the most current driver. I went out to ATI and got the most current driver, installed, reboot and OH JOY! I get video in the capture window during preview AND during capture (of DV)!
I also let windows (device manager) look for updated drivers for sound and it said the driver was the most current. Again, it was not. so the moral of the story is...Don't trust Device Manager on current driver versions.
Hope this will help some folks out there.
Side Note*
Most of us spend hours on forums looking for answers/fixes to particular problems. Most replies I see are either in the vein of "I have that problem too" or " try this, it worked in this OTHER version or try this OTHER software" etc. If you dont have an answer/fix for the problem, dont post.
ON the flip side of that, when posting a problem you want an answer to, Give all the pertinent information in your initial question. " Premiere crashes when I plug up my camera" does NOT suffice! What version of Premiere, what camera, what OS, What kind of connection, etc.

Ichat hangs when I video preview

I've tried 2 isignts. They work with ivisit and yahoo but when I try and start a one on one video conference or video preview the app always hangs.
I've tried reinstalling ichat using pacifist. Tossing out all the plist files associated with isight and ichat but the same thing happens.
alan

Hello alan,
It seems you have already tested your iSights using the hints in the How To Ensure Your iSight Is Functional FAQ and have determined that you do not have an iSight problem.
Does iChat hang when you launch it from the
b Finder > Go > Applications
folder iChat iCon, too?
EZ Jim

Any solutions for lost render/preview files when opening files?s

Have any solutions been found for the intermittent lost render/preview files when opening a large file? I have Premiere CS6. A large project file that I have been working on lately opened without a hitch with previews intact ...until I bought new faster hard drives and rebuilt the computer (built with the same drive letters). I just installed the latest updates. When I now open this file, a segment of the sequence always opens without previews, unrendered, no matter how many times I rendered the file previously. I don't use 3rd party plugins. I am using the warp stabilizer. I tried all the suggestions that I have found on the forums (using a blank sequence to close and open, unchecking “write XMD…” etc.) but none work. I checked the render/preview drive, and these files are on that drive but they will no longer link to the project. It now takes a good 15 minutes to re-render every time I open.

I may have found a solution. I took out the warp stabilizer, and then added it back in on the clips in question, and then re-analysed and re-rendered. So far, so good. It seems that bringing in the warp stabilizer effect in the file into the re-built computer needed re-analysing (as I do after this 2 day exercise.)

When I downloaded 4.3 i lost the sound when I record videos

When I downloaded 4.3 I lost the sound when I record videos

That is the issue. FCP works with footage as a Rectangular pixel setting.
Try this little trick and see if it doesn't solve it:
www.proapptips.com/shane NON-STANDARD CODECS
Shane

Problems with video previews: image freezes when scrubbing (CS6)

I just installed CS6 on my computer after working with CS5.5 and I encountered a strange problem with my EOS5D Mk 2 and also Ixus 100IS footage in Bridge CS6 (actually this happens with every video).
In CS5.5 I was able to preview my mov files and scrub through them without many problems (aside from a casual crash, but hey... )
In CS6 now the video preview starts and everything seems fine, until I scrub to a later point in the video. At that point the video freezes but the sound goes on. The only way to make the video run again is to click pause and then click play again. You can imagine that scrubbing through videos isn't much fun..
Has anyone ever had a problem like that with CS6?
Since CS5.5 is still installed, I checked and found out, that in Bridge CS5.5 everything is still working fine: No video freezes there - only in CS6
I already updated to the latest graphics card driver and all updates from CS6. Does anyone have an idea what I could do?
some stats about my computer:
win7 64bit
nvidia geforce GTX 590, driver 301.42
no other video software installed
Aside from that, I also realized that video quality in the preview area isn't particularly brilliant (neither in CS5.5 nor in CS6). Since the video is scaled to the preview window size, I sometimes get scaling artefacts/moirees. Is there a way to smooth the video playback, like you could in a regular video player?

Perhaps your understanding of rendering is different than mine. I think of it more as combining edits to form a new video. Are you using rendering as the same as playback? Also, not sure how you can have a system that has only CS6 files, as files are the same for CS5.5. I must be missing something here.
Manniac described the error well "In CS6 now the video preview starts and everything seems fine, until I scrub to a later point in the video. At that point the video freezes but the sound goes on. The only way to make the video run again is to click pause and then click play again".
Believe that error is fixed as my video play OK now.

Ichat AV quits no error message when video preview turned on

I just purchased a new mac book pro with 10.5 installed. I first played with photo booth and it worked fine then I installed some of my applications and tried iChat. It starts up but as soon as I turn on video preview it quits with no error message. I went back to photo booth and now it will only show a black screen and if you try and take a picture it has to be forced to quit. With both the green light comes on. Just to see if there might be a hardware problem with the camera I tried using iMovie to capture video and it works fine.
Applications installed Office 2004, FCP studio 5, and parallels desktop.
I tried uninstalling the apps, and running disk utility but still the same problem.

Parallels.
Alter the way it uses an IP.
I think it the Sharing option of the Mac IP that is the problem
1:28 PM Sunday; November 11, 2007

Getting the following message on Final Cut Express "audio only capture selected video preview disabled" how can I get the video capture back?

I'm getting the following message on screen when attempting to capture video "audio only capture selected, video preview disabled." How can I get the view preview back?

FCE doesn't allow for audio only capture, it's in a twist somewhere.
Try trashing the FCE preferences.
Al

How to tell whether video preview is working?

An app shows video preview with code essentially the same as in
the MSDN document:
async void ShowPreview(object sender, RoutedEventArgs e)
if (mediaCaptureMgr == null)
// Using Windows.Media.Capture.MediaCapture APIs
// to stream from webcam
mediaCaptureMgr = new MediaCapture();
await mediaCaptureMgr.InitializeAsync();
myCaptureElement.Source = mediaCaptureMgr;
await mediaCaptureMgr.StartPreviewAsync();
It works most of the time. However, sometimes the video does not show. When this happens, myCaptureElement.ActualWidth and myCaptureElement.ActualHeight still return the correct values. This probably means at least something is working. In this case, how can
the code tell what my eyes can see - the video is not showing?
Hong

Hi Hong,
Based on my knowledge, your problem may related to the dispose of the MediaCapture object. Forget to dispose it when app suspends will result in a negative user experience for your app.
About your question, I’ve not seen such property in MediaCapture class, so it’s recommend to create a Boolean that indicate whether the app is currently previewing video. You need to maintain this object when start or stop preview. You can find more information
from this page.
https://msdn.microsoft.com/en-us/library/windows/apps/xaml/hh868171.aspx. See Step 5 section.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click HERE to participate
the survey.

Video previews not working in iTunes

Hi all,
I've seen this posted a few different ways without any resolution to the problem so I thought I would give it a shot.
Video previews are not working properly for me. When in the iTunes Store and I click on a "View Trailer" for a movie or preview for a music video, a pop-up window appears in iTunes with a white background. The audio will kick in but the video never starts. I am using iTunes 9.2 (61).
Has anyone uncovered a solution to this?
Thanks!

Just to clean this unresolved issue up, seemingly the problem disappeared after upgrading to iTunes 9.2.1 (5).
Thanks!

Camera video preview - Random crashes and green screens

Hello everyone,
I am currently working on a Windows Phone 8.1 app and I need to preview video from the phone's back camera. For quite some time I've been struggling with random crashes and green screens. When these green screens appear, all camera apps become affected and
the device needs to be restarted. Occasionally the phone freezes and only recovers after battery removal. I test the app on my Lumia 620.
After some web search, I found references to the same problem by many users/developers of different apps. I'm really frustrated as I've tried many possible solutions with no avail.
Here is part of my code:
//in App.xaml.cs:
MediaCaptureInitializationSettings settings;
public static MediaCapture captureMgr;
public static bool UnableToInitializeCamera = false;
public async Task InitializeVideoCapture()
DeviceInformation backWebcam = await GetCameraDeviceInfoAsync(Windows.Devices.Enumeration.Panel.Back);
if(captureMgr!=null) captureMgr.Dispose();
captureMgr = new MediaCapture();
settings = new MediaCaptureInitializationSettings();
settings.StreamingCaptureMode = StreamingCaptureMode.Video;
settings.PhotoCaptureSource = PhotoCaptureSource.VideoPreview;
settings.AudioDeviceId = "";
if (backWebcam != null)
settings.VideoDeviceId = backWebcam.Id;
else
var _messageDialog = new MessageDialog("Back panel camera not found");
_messageDialog.Commands.Add(new UICommand("OK"));
_messageDialog.ShowAsync();
try
await captureMgr.InitializeAsync(settings);
captureMgr.SetPreviewRotation(VideoRotation.Clockwise90Degrees);
UnableToInitializeCamera = false;
catch
UnableToInitializeCamera = true;
Debug.WriteLine("HANDLED EXCEPTION: camera could not be initialized");
var _messageDialog = new MessageDialog("Unable to initialize camera");
_messageDialog.Commands.Add(new UICommand("OK"));
_messageDialog.ShowAsync();
protected override async void OnLaunched(LaunchActivatedEventArgs e)
//.... other app initialization code
await InitializeVideoCapture();
Window.Current.Activate();
private async void OnResuming(object sender, object e)
AppIsResuming = true;
FinishedCameraInitialize = false;
await Task.Delay(TimeSpan.FromSeconds(0.5));//this makes crashes less frequent
await InitializeVideoCapture();
FinishedCameraInitialize = true;
if(WasPreviewingCamera)
WasPreviewingCamera = false; //the following line allows time for SetupPage._captureElement to be assigned before video preview starts while (!SetupPage.CaptureElementSourceAssigned) await Task.Delay(TimeSpan.FromMilliseconds(1));
SetupPage.CaptureElementSourceAssigned = false;
try
Debug.WriteLine("trying to restart video preview");
await captureMgr.StartPreviewAsync();
SetupPage.PreviewingCamera = true;
catch
Debug.WriteLine("HANDLED EXCEPTION: unable to start previewing");
SetupPage.PreviewingCamera = false;
GC.Collect();
AppIsResuming = false;
private async void OnSuspending(object sender, SuspendingEventArgs e)
var deferral = e.SuspendingOperation.GetDeferral();
while (AppIsResuming) await Task.Delay(TimeSpan.FromMilliseconds(1));//prevents crash when app is suspended right after it is resumed
await CleanupCaptureResources();
TimeOfLastSuspend = DateTime.Now;
FinishedCameraInitialize = false;
GC.Collect();
deferral.Complete();
public async Task CleanupCaptureResources()
if (SetupPage.PreviewingCamera)
await captureMgr.StopPreviewAsync();
WasPreviewingCamera = true;
SetupPage.PreviewingCamera = false;
else WasPreviewingCamera = false;
if (captureMgr != null) captureMgr.Dispose();
//in SetupPage.xaml.cs
void OnSuspending(object sender, Windows.ApplicationModel.SuspendingEventArgs e)
var deferral = e.SuspendingOperation.GetDeferral();
_captureElement.Source = null;
CaptureElementSourceAssigned = false;
GC.Collect();
deferral.Complete();
private async void OnResuming(object sender, object e)
ProgressRing2.Visibility = Visibility.Visible;
ProgressRing2.IsActive = true;
while (!App.FinishedCameraInitialize) await Task.Delay(TimeSpan.FromMilliseconds(1));
App.FinishedCameraInitialize = false;
captureElement.Source = App.captureMgr;
CaptureElementSourceAssigned = true;
GC.Collect();
ProgressRing2.Visibility = Visibility.Collapsed;
ProgressRing2.IsActive = false;
Any help towards a solution will be greatly appreciated.
Thank you

I will also advice that you start by following the
Windows Store app sample.
Is this a Windows Phone app?
The crash/green screen only manifests itself when I suspend my app and switch to the default camera app (could be any other camera app perhaps). It happens roughly 1 out of 8 times. That's why I posted the suspension and resuming handlers, which I wrote
according to the msdn instructions.
I found
this page with a sample that demonstrates the MediaCapture API for Windows Phone. Some developers have reported problems similar as mine. Has Microsoft dealt with this issue?
I've spent quite a few weeks trying to investigate this problem, without actually knowing if it is my code that needs to be debugged. That's why I'm asking if other developers are facing similar problems.
Thank you
Edit: It seems that the crash/green screen can appear when suspending/switching to any app (regardless if it uses the camera or not). Also, all works fine when the app is running on the debugger.

Video Preview Error: Error Compiling movie. Unknown error.

Problem in Adobe Premiere Pro CC - Rendering movie prior to Exporting.
I have cleared all Temp and Cache files to make sure I have enough space for rendering (126GB free space), but I still get a Video Preview Error message when I try to Render or Export.
What should I be looking for in my movie settings to clear the "unknown error"?

05555...did you get this reconciled??? If so, what did you do....I have encountered the same window myself, today.

Lost video preview when upgarding to 6.05

Similar Messages

Maybe you are looking for