Lost videos after pushing "command z" and memory card already removed.

I recently copied some videos from an SD Card using the built in card reader on my 2009 iMac. After copying the videos to a folder on the computer, I removed the memory card and formated/erased it in the camera. Upon returning to my computer (memory card still removed) I accidently pressed "command z" with the current Finder window still active and the videos disapeared. I was wondering if the videos are lost forever, or is there some location that they could still be found at? Thanks

You can try a data recovery program.
Data Recovery – Best
Data Recovery – Disk Drill
Data Recovery – Data Rescue
Data Recovery – File Salvage
Data Recovery – Stellar Phoenix
Data Recovery - uFlysoft

Similar Messages

Need Help! Dell poweredge T630 cannot reboot after trying to add new memory card

What errors are you seeing on the screen?

hi, can any one please advise what should I do for my server? Dell poweredge T630 cannot reboot after trying to add new memory card. Even I remove the newly added memory card and only keep the original one there, it still cannot reboot. Before I try to add the memory card, it works well without any rebooting issues.
Thank you so much for help
steven
This topic first appeared in the Spiceworks Community

USB ports and memory card slots not working

My Pavilion a6120n desktop has worked brilliantly ever since I purchased it. As of last week the 2 usb ports in the front and the 2 unused usb ports in the back have stopped working. My printer is plugged into one rear port and my wireless mouse is plugged into a second rear port and these work fine. I generally use a memory stick for data swapping or the card reader slots (which have also stopped working). I no longer see the memory card icons in the "Computer" window. When installing something new the "New Hardware Found" statement pops up but the driver install always fails. I think it is a software issue but there are no usb drivers to download on the HP/support site that I can find. . . so . . . Below is what I have tried so far.Run antivirus software. Full scan & memory scan - no issuesRun malewarebytes full scan - no issues I have tried restarting several times with no success. Restore to several previous restore points = failedRestarting computer in repair mode = failedRun the repair disk that I had made = failedChecked the power management for each usb port to see if the power was routed properly = okRemoved the case cover and carefully inspected the wiring and connectors.finally I tried uninstalling the usb drivers = failed Upon restarting the computer the last time the startup file must have failed and after several hours of attempting a repair I had to reinstall the Window 7 completely. Still no usb or memory card function. Any help would be appreciated Thanks,MrBob38

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how the USB ports and memory card slots are not working, and I would be happy to assist you in this matter! Since you mentioned that you have already re-installed Windows 7 on your computer, and the USB ports still do not work, please contact our technical support for further assistance in this matter by clicking the link below to get the support number for your region.
www.hp.com/contacthp/
I hope this helps!
Regards

Zen 4GB and memory card

Is it possible to play music from Zen and memory card together? Sometimes when I put music on my memory card ZEN had some problems of reset :S

I am a dork, a few mins messing with it i realized in the main menu of the zen with the card inserted hit removable disk and hook up via usb, now my computer sees the sd4zen dri've and i can dump more fun stuff for zen on there...
Sorry to take up space maybe someone will read this and help them with the same issue i was having or mods if you choose just delete.
Bill

Untrusted software found on memory card to remove ...

I have frequent problem showing when I restart my device Nokia E63 "Untrusted software found on memory card to remove goto application manager" Any solution?
LEARNING AND WISDOM ARE SUPERFLUITIES, THE SURFACE GLITTER MERELY, BUT IT IS THE HEART THAT IS THE SEAT OF ALL POWER . . . .
Solved!
Go to Solution.

Being a Nokia S60 device user, you may every now and then get insanely annoyed by the error message "Untrusted software found in memory card..." , "installing.. untrusted software found in mass memory go to app manager" or "untrusted sw found" whenever inserting your memory card, or rebooting your phone. (The situation is showed in the video over) A lot users might also find it a dated issue since tips written, spreaded to tell how to resolve it have long been there on the net. So I'm just doing the recollection and, a little more.
E:\Private\10202DCE is the path you are supposed to find and the file folder to delete. The error message would be gone from next time you insert memory card or reboot the device after the folder is deleted.
Until another theme is installed in your memory card. Because it will generate another folder with the same path and name. So this seems not the ultimate answer. Intalling the theme on phone's RAM would be a better solution if you get memory space large enough in your phone RAM.
But, what if, suppose, that you intend to install themes on memory card for there always was, is and will be much more memory space in it than in the phone's RAM? Find and delete the folder over and over again after you install any theme for every single time? For sure you can give it a try if you want to.
Yet now there comes out another approach in the commercial market from MMMOOO team. To customize and revise themes, or maybe get brand new and cool themes without any this kind problem. MMMOOO is the No.1 Theme UI provider for Nokia Symbian phones, and our unique tech ensure our theme without this problem. Thus to make it really gone forever!

HT3702 I wanted to cancel my annual subscriptions but could not, now I realize I have been billed. I need a refund and credit card information removed to prevent this. I am really disaPpointed thought someone would have written me first instead of my cre

I wanted to cancel my annual subscriptions but could not, now I realize I have been billed. I need a refund and credit card information removed to prevent this. I am really disaPpointed thought someone would have written me first instead of my credit card just being automatically debitted. I really cannot afford this right now, I find itune is doing an in justice.
Sent from my iPad

There are instructions on this page for managing and stopping auto-renewing subscriptions : http://support.apple.com/kb/HT4098
In terms of a refund, all purchases are considered final, but you can try contacting iTunes support and see if they will refund or credit you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Videos missing from iPhoto after prompted to clear from memory card

I just imported a couple of videos from my GoPro camera into iPhoto. After the videos were imported, I created an album. Once the videos finished importing I was prompted on screen to erase the video's from the memory card and that the import was complete. I did erase them. I then imported more pictures and videos from my regular camera into iPhoto and also following the prompt to erase the memory card post import. The pics/video from the regular camera are there, but my GoPro videos are not. I cleared the memory card so I can't re-import them. It seems they have to be on the computer somewhere since it said "Import complete, Erase Memory Card". Are they still on here somewhere or gone forever?

Create a smart album with the criteria
and check there to see if you can find the missing videos. If not then you'll need a file recovery app like PhotoRescue to try too recover the files from the memory card. There are other similar apps that can do the job. Go to MacUpdate.com and search for photo recovery. Most have a demo mode to show you if you can recover the file before you have to purchase it.
Never let iPhoto or other import app delete the files form the memory card. It's best to make sure the download was successful and that all files are viewable/playable before deleting from the menory card.d When memory cards are involved it's best to let the camera reformat the card than let the app or the Mac do the deleting/reformatting.

Please somebody help me lost audio after opened logic 9 and X at the same time helpppp

helppp please lost audio after opened logic9 and X together can't find the solution i only have audio in the main output of my audio interface gott a motu 828 MKII somebody help me please

Hello all looks normal when the problem was presented simultaneously opened LPX LP9 and when you return to open a new project or the same project and I only have audio in my headphones output interface, my interface is a motu 828Mk2 the project exists and the interface looks normal in every normal output comprises all looks normal just never sounds like it had passed but never opened the two programs at the same time not to do, I use a digital mixer yamaha normal surface responds as ccontrolador all seems to work perfect but I only have audio output from the headphones even if I motu channel by channel and I assign output sound headset

Best software to recover video files on reformatted SD and CF Cards? Or worth seeking professional help?

Hi all,
The person I work for has mistakenly re-formatted a collection of SD and CF cards (incl. Sony F3, AJA Ki Pro Mini). He needs to recover video files.
Is it worth it to have the cards professionally recovered at a place like Tekserve, or is there a software program anybody here has had success with? There seems to be a lot of recovery software out there and it's hard to tell what's trustworthy. I should mention that the software doesn't have to be free, it just has to be effective and cheaper than a professional recovery.
A few other stray but important questions:
-What are the risks of running a recovery program that fails? In other words is it possible for software to damage the old data so that no other program has a chance of successfully recovering it?
-Most importantly: is it possible to recover at least some data from a card that has been reformatted and then recorded over a bit, but not all the way? I have read that if the whole card has been recorded over, the old data is irretrievable. But there's only a little bit of new material on this card.
Thanks!

Reformating storage devices usually involves deleting the catalog that tells the OS where files start and end. The files are still there unless you have chosen a secure erase where the systems writes zeros over the whole drive several times (sometimes known as a DoD format).
What this means is as long as you do not try to write to the media, the files are still there. Best practice would be to clone the media then work on the clone. This way you do not introduce any addiional changes.
The more important element of your question is "can I get these files that still exist off the the media?". The answer is a resounding "maybe".
I have used FileSalvage to try to recover material from a failing hard drive. It was pretty successful with small files (Word docs, Acrobat files, Adobe Illustrator images and the like) but considerably less successful with large video files. I believe it is because video is more sensitive to end of file (eof) markers and if those are not found, the whole file is useless.
If you have reused the card, the chances of getting anything go WAY down as the way files are written to storage devices is not that orderly. Bits get written all over the drive/ flash storage. When there is no catalog to tell the OS what memory locations have a purpose, new files can be written over multiple old files. Will this completely remove any chance to recover your material? Most likely, but if you are purchasing software anyway it will not cost you any additional cost to try on those cards. You might get lucky.
Also, in the locking the barn after the paddle is lost upstream, this is why I always create two copies of the contents of cards before I start editing. 1 copy goes on the on-line editing RAID and the other copy go to an archive drive. Then once a week, I'll back up the archive drives in the studio to a set off-site. This way I have 3 copies while I'm working and 2 copies once the project is closed out. Given the low price of hard drives, it's easy to create redundant backups.
Good luck,
x

VIXIA HF G30 Power and Memory Card Problems

While taking video with my G30 using MP4 at the 35Mbps rate in Sports mode, I have encountered two problems.
First, it will sometimes stop recording and say that the memory card is not fast enough. I'm using a 64GB PNY Elite Performance SDXC UHS-1 Class 10 90MB/sec card that is plenty fast and should work fine.
Second, I've had the camera freeze up while recording. When this happens, the red "operation" indicator on the screen starts to flash and I am unable to stop recording. Sometimes, after I stop recording, it will not start again. In one case, I had to turn the camera off to get it back to normal. In another case, even turning the camera switch off did nothing, as the camera stayed on but would not respond. I had to remove the battery to get it to turn off.
Canon's response was as follows:
"I believe the memory card may be the cause of this issue. The PNY Elite Performance memory card, while fast enough, also incorporates the UHS-1 standard, which is not supported by this camcorder. I recommend trying a second memory card without the UHS-1 designation."
However, I checked the Canon list of tested memory cards, and many of them use the UHS-1 standard, so that does not sound like a valid issue.
Has anyone else had similar issues?

Update. I bought and used the Sandisk Extreme 32GB cards (45 MB/s) that are recommended by Canon. Unfortunately, I still received some memory save errors due to inadequate speed, although they have been much less frequent. So, the memory card is probably the likely cause for this issue.
However, I also still had the camera freeze up on me again, which required me to remove the battery. So, I returned the camera and ordered a replacement because I didn't want to find out later that I just happened to get a clunker. The new camera also gave me a couple of memory save errors with the Sandisk memory cards. Eventually, this camera also froze up on me, so apparently this issue may be a more widespread problem with the camera software, not a specific problem with the hardware.
I'm pretty sure that every time it froze up I was using the 3 second pre-record feature. I really like the feature since it ensures that I will not miss any action even if I start the camera later than I should. However, if this is causing the problem, I will have to live without it. I have since used the camera for about six hours worth of video recording with no further problems.
I would recommend that Canon do some more testing, because I suspect that something in the pre-record function is causing intermittent problems. I will provide any updates if it happens again, but I am reluctant to try the pre-record feature again.

Hidden files on USB and memory cards

When I put my USB or my camera's memory card into my mac and delete files from them, they disappear but haven't actually gone from my memory card/usb. So the space is still taken up by the hidden files. On a PC I can find how to reveal the hidden files and delete them, but I don't know how to do this on a mac.

Don't delete files from your camera cards using your Mac — always erase or format the cards in the camera, using its own menu commands.
What sort of device do you mean by "my USB"?
After trashing any file(s) from any device that is connected to the Mac, you must empty the Trash to regain the space occupied by the file(s). The device must be connected to the Mac when you empty the Trash, because the Trash is an invisible folder that resides on the device, and it can't be emptied if the Mac can't access it.
The reason I recommend not trashing files from your camera cards while they're connected to the Mac is that many cameras become confused when they encounter a Mac Trash folder on a memory card, and will refuse to use the card until it is reformatted in the camera.

E51 update and memory card password problem

This morning I updated the software of my e51. But after update, it asks me password of my memory card and I entered all the possible passwords but it doesn't accept.
What can I do about it? I searched internet tried some ways to unlock but they just did not work.

Nokia E51
baskurtb wrote:
This morning I updated the software of my e51. But after update, it asks me password of my memory card and I entered all the possible passwords but it doesn't accept.
What can I do about it? I searched internet tried some ways to unlock but they just did not work.
For some reason even when you did not add a password to your memory card, sometimes your phone after a factory reset, may ask you for a password for your memory card. There is a way around this. Go to SETTINGS à SECURITY à REMOTE LOCK and add a new codeword for locking your phone eg “lockthis” and put in your lock CODE (default is 12345). When this is done, use your lock codeword “lockthis” as the password for the memory card and you should be able to get into your memory card again. ATTENTION!!!!!! The codeword must have maximum 7 characters!!!! IT REALLY WORKS!!!!! 100%

N97 and memory card?

well i've got a N97 to try out for a couple of weeks and thought setting it up would be a quick exercise but its not to be. i thought after backing up my n95, all i'd need to do is pop the memory card into the 97 and do a restore, but this didn't seem possible, it seems unable to read the card. does it need formatting so the n97 can read/write to it?
i'm just transfering all my music i have on my card to the phone via windows media player and i'm going to be here hours! (i couldn't figure out how to do it with the nokia software)!
Nexu 5

The card doesn't need to be set up differently. I'm using the card out of my N95 (although admittidly I did format it to keep things nice and clean). I did notice however that the folder structure seems to be the same as on the N95.
Things don't just "restore" themselves however. Music should appear in the Music Player after refreshing your library but applications won't normally re-install themselves - hey it's S60 5th edition on the N97 anyway so not all your S60 3rd edition apps will work now.
There's a good application called "Switch". Have a look on your N95 under Tools -> Utilities.
You can use Switch to copy over all your contacts, messages calendar entries etc. which is what I did when I got my N97 - it works a treat.
If you're still having a problem with music however then try refreshing your music library from within the options in Music Player...
Good luck!

Maps App and memory cards

Hi,
The MAPS app, is incapable of finding adresses eventhough I copied said adress from the MAPS app onto my adress book. What is the matter with this app???
Also I can't find a way to calculate an itinirary between two destinations other if one of the two is not necessaraly my PRESENT LOCATION. Is there a way to do it? And I never get multiple itiniraries wich is a problem when I know there is construction work on the most obvious itinirary.
Furthermore, an adress or a phone numbre sent by email or text message is not identified by my phone as such so I cannot click on it to go directly to the MAPS app or the automaticaly dial the phone number.
LOGICIEL
My BlackBerry Link freezes 50% of the time on my iMac, does this also happen on a PC?
Added Memory card
Is there a way to transfer excess data to my multimedia memory card?
NIC

NicolasCleroux wrote:
Added Memory card
Is there a way to transfer excess data to my multimedia memory card?
HOW DO I TRANSFER EXCESS DATA FROM MY BBZ10 MEMORY, TO THE MULTIMEDIA MEMORY CARD I ADDED TO MY BBZ10.
NicolasCleroux, I asked above and you've yet to answer... what is this "excess data" you speak of?
Please, scroll up, read and answer that, and then perhaps we can deal with that... What do you consider "excess" data?
NicolasCleroux wrote:
LOGICIEL
My BlackBerry Link freezes 50% of the time on my iMac, does this also happen on a PC?
IS IT A PROBLEM ON A PC??
For some, Link is a problem on Mac and Windows. I've had some isues with it on my Win7 PC, but it does work after some fixing of issues in my firewall and proxy settings.
NicolasCleroux wrote:
Furthermore, an adress or a phone numbre sent by email or text message is not identified by my phone as such so I cannot click on it to go directly to the MAPS app or the automaticaly dial the phone number.
WHEN I SAY "IDENTIFY" I MEAN THAT THE ADRESS OR PHONE NUMBER CANNOT BE CLICKED ON TO ACCESS DIRECTLY THE RELEVANT APP ( PHONE OR MAPS)
Make sure those phone numbers are formatted properly to be recognized as a phone number or address.
For instance, where I am, a phone number formatted as xxx-xxx-xxxx work and is "hot-linked" to dial the number.
Similarly, with an address: 123 Street, city, St, Zip" will create a hot-linked address openable in BlackBerry Maps.
I know in my own Address Book's contacts, i have several linked addresses which open in maps, and you will see them in a highlighted blue text if they are recognized as such.
So, please give an example of how your phone numbers and addresses are formatted?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

E 72 - hard reset and memory card

Hi,
I am having some problems with the E 72 which seem like a virus, and i wanted to know what the options for reformatting are. Should i do a return to factory setting, or a hard reset?
Second, how do i make sure that the memory card is virus free as well? If i format it, how would i recover any pre-installed software that came with the phone?
Thanks

If you are worried only about the preinstalled SW that came with the phone, then they will remain after the hard reset. You will loose your data, configuration and all installed apps.
Was this post helpful? If so, please click on the white "Kudos!" star to the left. Thank you!

Lost videos after pushing "command z" and memory card already removed.

Similar Messages

Maybe you are looking for