Lost vision llb files in 8.6

I am trying to open a vi that was obviously created in 8.5, then upgraded to 8.6.  I am now being peppered with 100's of cannot find the llb errors, which for every single one I have to find the correct file, then select the function from the llb. 
Is this really the way this error should be handled?  I have specified the location of IMAQ Rectangle 3 times now and it has become a little silly that this file cannot load correctly.
Thanks for your help

If you have VIs created under LV 8.5 using libraries from the Vision Development Module 8.5,
and you load them with LV 8.6 now, you will also have to Vision Development Module 8.6 installed!
Christian

Similar Messages

  • HT201272 I lost all my files after dowloading Icloud and updating Itunes on 24 September 13.  having reloaded the computer and and files from an Emergency Backup folder I can no longer see My Library in Itunes or in Itunes store, and my ipod and ipad aren

    can anyone help with retrieving My Library in Itunes and Itunes store - having updated Itunes and Icloud on 24 September 13, my computer failed and I lost all my files which were eventually backed up to an Emergency Backup.  my computer is now working again and I have down loaded Itunes and transferred all the files from my Emergency Backup.  Non of the music went back into Itunes, so I had to find these files and manually moved them to Itunes.  The music is now in Itunes, but I no longer have the folder named My Library, which I think is the reason my Ipad, ipod no longer sync any additional music I have added to Itunes. Does anyone know how to rectify this please.
    Many thanks.  Crusey

    iTunes expects files and folders to be in very specific locations.  When you start iTunes it looks for a file called library.itl which is in the iTunes folder.  It then uses all the references in that file which tell it where all your media files are located to build up the view you normally see.  Probably you moved the library file so iTunes cannot find it and it will make a default one which is empty.  When you plug in your iPod it isn't recognizing the library since it is not the same one to which you synced last.
    Simply put, you need to undo all your file moves.  Not as eaily done as stated but since I cannot quite see from here exactly what you spent an hour doing last night it will be up to you.  Did you make a backup before doing all this?
    What are the iTunes library files? - http://support.apple.com/kb/HT1660
    More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
    What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
    Where are my iTunes files located? - http://support.apple.com/kb/ht1391
    iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847
    Image of folder structure and explanation of different iTunes versions (turingtest2 post) - https://discussions.apple.com/message/13025536 and https://discussions.apple.com/message/17457605

  • I had a drive failure and lost the iWeb file along with other things.   I did manage to save a lot of user file documents but I don't see or   recognize the my iWeb site file. It was on a 15" G4 Titanium pb. I'm trying to find a way, using version 2.0.4

    I had a drive failure and lost the iWeb file along with other things. 
    I did manage to save a lot of user file documents but I don't see or 
    recognize the iWeb site file. It was on a 15" G4 Titanium pb.
    I'm trying to find a way, using version 2.0.4 of iWeb on a different 
    pb to recover the file into the iWeb app or a way to download the site into iWeb.
    There are 6 pages of images and text, and it 
    would be a task for me to recreate the whole thing again. I did 
    download the site but I don't know how or if I can get iWeb to see it and open it.
    Does anyone have any knowledge about this? The link to my site:
    <http://web.mac.com/danauerbach>
    Any suggestions will be most appreciated.
    dan auerbach
    [email protected]

    Unfortunately iWeb cannot read or import previously published files, only generate them.  You'll have to recreate your site from scratch.
    However, Chapter 2.3 on the iWeb FAQ.org site has tips on using some of the existing files, image, audio, video, etc., from the published site in the recreation of the site.
    OT

  • How to recover lost folders and files - Pls help, help...

    Some days ago I lost all of my 15 GB folders and files that stored in my Macbook Pro hard drive called DATA.  I brought my Macbook pro to an experienced computer tecnicians who providing data recovery services. To his and my suprise, after checking, scanning it a few hours, he said their is no way to recover because he did not find any trails at all.  The computer still seems working properly - I have no problem with any applications.  There are few other folders in the DATA hard disk containing pictures, computer programs still remain.  These lost folders and files contain mainly documents (word, excel, power point, pdf etc) which I accumulated in my many years working  !!!!.  I did not make a back up since last September partly because I think Mac is very safe.
    The computer with me all the time on that day and only my son used Power Point to make a simple presentation on that evening - he can not save it on the folders the he normally use - All the folders and files are gone.
    I will appreciate it very much if any of you can tell me what would be the possible causes and more importanly how to recover the lost folders and files.  They are very very valuable to me.
    Many thanks for your kind attention
    Loimekong from Vietnam
    Macbook Pro 2.4 Ghz
    Intel Core 2 Duo
    4 GB 1067 MhZ DDR3

    First, did the data actually get deleted, or is it still there somewhere?  Try searching the drive for some of the documents, perhaps it's all just in another folder on that drive.
    If it's truly gone, it's impossible for us to say what might have happened to make it unrecoverable.  Perhaps someone using the computer used Secure Empty Trash, or securely erased empty space on the hard drive.  Perhaps it was overwritten by other stuff before you noticed.  It's possible the hard drive is starting to fail, though this seems like an awfully specific problem for that to be the issue.
    Or perhaps the tech you took the computer to didn't know what he was doing.  Why not try recovering what you can on your own?  See Recovering deleted files.
    You should be aware that no computer is safe.  All computers rely on hardware that may fail and software that can have bugs.  You absolutely MUST maintain a good set of frequently-updated backups...  no fewer than two full backups of anything you don't want to lose.
    (Note that my pages contain links to other pages that promote my services, and this should not be taken as an endorsement of my services by Apple.)

  • How can I Re-Download Purchased Movies from Itunes store. Somehow I lost The original File?

    The movie “The Hunted” could not be used because the original file could not be found. Would you like to locate it?
    The above message appears whenever I try and play a movie from Itunes
    Is it possible to Re-Download purchased movies from Itunes as I have lost the original files somehow?

    You can re-download music, books, tv shows, and 3rd apps, but not movies.
    http://support.apple.com/kb/ht2519

  • MY hard drive crashed and i lost all my files. How do i move my files from my phone or ipad back to my new hard drive?

    MY hard drive crashed and i lost all my files. How do i move my files from my phone or ipad back to my new hard drive

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • Lost all my files in ipad pages app

    I lost all my files on the apple pages app on my ipad. How do I retrieve my lost files?

    Dock folders are only links to the actual folders which should be located in your user folder.
    Open a finder window andf click on your name. Then yo'll get a list of all your folders which are located there. Standrad should be eight folders: desktop, movies, pictures, music, websites, public, downloads and documents.
    When you click on that one, is it still empty?
    Maybe you should check about your problem on one of this site:
    http://reviews.cnet.com/macfixit or http://hints.macworld.com/
    Good luck.

  • I have a video that I created for my daughter's first birthday.  The hard drive on my computer crashed and I lost the video file.  The only place I have it is on my iPod Classic.  How can I transfer the video from my iPod to my new hard drive?

    I have a video that I created for my daughter's first birthday.  The hard drive on my computer crashed and I lost the video file.  The only place I have it is on my iPod Classic.  How can I transfer the video from my iPod to my new hard drive?

    You are in luck, Refer to this recent post by tt2, on recovering media using 3rd Party Software.
    He has made a comprehensive list, browse through them and decide which  suits your requirements.
    Have a nice day!

  • I lost all my files (photo, music, documents, ect), but they still show on the Mac HD.

    My wife created a new account from our joint admin account. She also made that second account an admin. account. Then she went into the new account and played around with the file sharing option in system prefereneces. She was unable to get the accounts to share, so she deleted the new account and restarted the computer. Now, our first/main admin. account has lost all the files. There are no documents, photos or media in the origianl admin account. However, when I go into finder and click "get info" on the Mac HD, it still shows that 300GB are used. I understand this to mean that the lost files are still on the HD. But I am unable to figure out how to get them back onto our user account. Can anyone help me?

    Get one of these and search your whole drive for something unique...
    Find Any File...
    http://apps.tempel.org/FindAnyFile/
    Hold Option or alt key when selecting Find to Find All.
    EasyFind...
    http://www.devon-technologies.com/download/

  • I recently installed MacKeeper on my iMac.  It was a disaster.  I lost applications and files.  Fortunately I had back up.  Worst of all it did something to my system software that it takes about 7 minuts to stat-up.  What can I do to get it to start-up f

    Version:1.0 StartHTML:0000000186 EndHTML:0000002354 StartFragment:0000001670 EndFragment:0000002318 SourceURL:file:///Users/armandodiaz/Desktop/I%20recently%20installed%20MacK.doc                   
    I recently installed MacKeeper on my iMac. It was a disaster.  I lost applications and files. Fortunately I had back up. Worst of all it did something to my system software that it takes about 7 minuts to stat-up.  What can I do to get it to start-up faster?
    Thanks

    How to Remove MacKeeper
    Given you have a backup you may want to think about erasing the hard drive and reinstalling Snow Leopard then restore your backup.

  • How do I create a .llb file that holds all the subVIs used in a VI?

    Hi
    I wish to create a .llb file that holds all the subVIs(~200) used in my main VI.
    When I open my main VI, and look into the 'show VI hierarchy' I see a lot of subVIs, so to copy all these subVIs into the library file is going to be really time consuming. I am hoping there is an option in Labview by which I could automatically put all these subVIs into one library file?
    Thank you
    Gautham Radhakrishnan
    Dept. Of Physics
    University of Toronto

    In your toplevel VI, go to "File..save with options".
    Now select "Development distribution", press save, and give it a name for the llb.
    LabVIEW Champion . Do more with less code and in less time .

  • I recently updated the iOS on my ipad 3 and lost all my files in the process. How do I recover my lost files which were not previously backed up?

    I recently updated the iOS on my ipad 3 and lost all my files in the process. How do I recover my lost files which were not previously backed up?

    If you don't have them backed up somewhere, then there's little possibility of recovering them. There are some utilities that can in some cases recover an inadvertently-deleted photo, but I've found none that can recover photos or other data from an iPad that was erased as part of an iOS upgrade. You can do a web search for something like "iPhone photo recovery" and you'll find some utilities you can try.
    Regards.

  • How to recover a lost archive log file?

    How to recover a lost archive log file? Do I need to open the database with RESETLOGS after recovery?-------No.156

    I think he might rewrite the question in his own words.
    I guess in the event of lost archive logs during db recovery, you have to open RESETLOGS and say goodbye to some of the data.

  • HT3775 can a .mov file be recovered if the record was accidentally shut down from loss of power? i was recording from the AJA Pro Ki when we lost power, the file is there but it wont play and comes up with the message, "The document "SC1ATK63.mov" could n

    Can a .mov file be recovered if the record was accidentally shut down from loss of power? i was recording from the AJA Pro Ki when we lost power, the file is there but it wont play and comes up with the message, "The document “SC1ATK63.mov” could not be opened. The movie is not in a format that QuickTime Player understands."

    Hi,
    Troubleshooting a start up script can be difficult. There are some third party programs that also keep logs of start up programs, however for Firefox this may be different.
    Is Firefox a startup program? [http://www.winxptutor.com/msinfo32.htm]
    Its also possible to check the Web developer tools for any scripts in a page: [https://developer.mozilla.org/en-US/docs/Tools/Debugger]
    In the control panel there is also Administrative tools to view event logs, but this may be something a local technician can walk you through.

  • Over the last few wks, i have lost several important file. Even the support team has not been able to recover them. Pls offer advice. I use microsoft office on my macbook pro, which is less than a year old.ce.

    Over the last few wks, i have lost several important file. Even the support team has not been able to recover them. Pls offer advice. I use microsoft office on my macbook pro, which is less than a year old.

    pklfromarlington wrote:
    Bob, Hate to steal your thunder but am hooked to an external hard drive using Time Machine and er information is where it shoudl be. Yes, I have combed the files, used Finder and any other tools I know.
    You did not steal my thunder. You asked for advice, I provided advice. I assumed that since you nor the "support team" could find your files that you did not have any backup. You should have told us you do regular backups. We have no way to know otherwise unless you tell us.

Maybe you are looking for

  • SMS_SITE_SQL_BACKUP component failed to reinstall

    Hi, I have a problem with SMS_SITE_SQL_BACKUP component on my SCCM SQL server. The SQL server is running on Windows Server 2003 x64 SP2 and site is in Native mode running SCCM SP1 R2 on Windows Server 2003 SP2 (separate servers) I've enabled a Backup

  • Portal Properties in webdynpro

    Hai I am developing a portal application in webdynpro. i would like to make some properties which can be changed in the iview properties. with normal portal applications this is possible through the portalapp.xml is this possible in webdynpro to, and

  • Audit Trail Report Ignores Parameters From/To Date on EBS 12.0.6

    Hi All, One of our customers is not able to filter the data in "Audit Trail Report" based on date parameters. Is there any patch for this.. EBS Version is 12.0.6 I have found a note but it is related to 11i. Audit Trail Report Ignores Parameters Tran

  • How do I get contains to recognize two objects w/ same data as equal?

    I created an EmployeeId class that has an int field called myId. What methods and interfaces should I implement in EmployeeId so the output of the program below will be "Already Have That EmployeeId!" ? I have tried to implement the Comparable interf

  • How to write include in user exit userexit_save_document

    when i am trying to insert a inlcude in the exit userexit_save_document. i am getting error. i ahve written a statement 'include 'Zabcd' inside the user exit. doubl clicked on the include->system asked to create a new include-> opted for yes-> an edi