Lost volumes between raidutil and diskutil

Suddently the Xserve (Xeon early 2008, 10.5.8) show the "?" at the boot.
I've set up an other OS X Server on an external drive.
None of the four volumes from the internal drives mount anymore.
I assume the server has restarted after a long power failure that outrun the UPS.
At first I thought the raid controller has failed BUT RAIDUtil shows every disks and volumes with the green OK dot.
DiskUtil or disk utilities don't show any of the raid5 volumes.
What happened to the volumes between RAIDUtil and Diskutil ?
Is there a "deep" command to make them back ?
PLease HELP !

LEt me show the cli :
TestXserve:~ root# raidutil list driveinfo
Drives Raidset Size Flags
Bay #1 RS1 931.51GB IsMemberOfRAIDSet:RS1 IsReliable
Bay #2 RS1 931.51GB IsMemberOfRAIDSet:RS1 IsReliable
Bay #3 RS1 931.51GB IsMemberOfRAIDSet:RS1 IsReliable
TestXserve:~ root# raidutil list raidsetinfo
Total Avail
Raidsets Type Drives Size Size Comments
RS1 RAID 5 1,2,3 1.78TB 0.00MB No tasks running
TestXserve:~ root# raidutil list
Device Name Device Type Device URL
0 AppleRAIDCard AppleRAIDCard x-raid-device://localhost/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP01@1C/I OPCI2PCIBridge/SAS@0/AppleRAIDCard#AppleRAIDCard
TestXserve:~ root# raidutil list status
Apple raidutil version: 1.2.0
General Status: Good
Battery Status: Charged
Controller #1: Hardware Version 1.00/Firmware M-2.0.3.3
Write Cache enabled
Volume Status Type Drives Size Comments
R1V1 Is Viable RAID 5 1,2,3 50.00GB Condition: Good
R1V2 Is Viable RAID 5 1,2,3 50.00GB Condition: Good
R1V3 Is Viable RAID 5 1,2,3 1024.00GB Condition: Good
R1V4 Is Viable RAID 5 1,2,3 701.52GB Condition: Good
TestXserve:~ root# diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *465.8 Gi disk0
1: EFI 200.0 Mi disk0s1
2: Apple_HFS Black Leo Server 46.6 Gi disk0s2
3: Microsoft Basic Data AXDEFI3X104 37.2 Gi disk0s3
4: Apple_HFS Black Data 186.1 Gi disk0s4
5: Apple_HFS Black Snow 93.1 Gi disk0s5
6: Apple_HFS Black Xtra 102.0 Gi disk0s6
TestXserve:~ root#
Last command Diskutil does not show any other devices aprt from my external "Black ..." disk.

Similar Messages

  • Lost connection between ACS and AD

    Hi
    I'm having a trouble with authentication to my WLAN. We are running a solution with LEAP and ACS 3.0 which gets it's users from our Active Directory. During the summer our ACS-servers seems to have lost the AD-connection and I'm no longer able to EAP-authenticate. All I get in the ACS is "Radius extension DLL rejected user".
    The AD and the ACS are on the same network but not on the same machine. I can log in if I add a local user in the ACS. I've also tried to empty my cached user database in the ACS but to no avail.
    One theory of mine is that it has something to do with a couple och hotfixes that Microsoft released in the middle of July.
    T.I.A
    /Tommy

    Hi
    Thanks for your replies. An update on the issue:
    I've gone through the issues in the suggestion made by cisco in the link:
    http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_field_notice09186a00800b1583.shtml
    but to no avail.
    At first we could se an error in the eventlog stating that the user didn't have sufficient rights but it disapeared when we created an account and ran the ACS-services via it.
    After that we tried to set up a local user in the ACS and it works like a charm even then the AD-accounts can't connect.
    We also tried to remove the hotfixes released by Microsoft but still nothing.
    Right now it seems as if the AD authenticates the user correctly but then the ACS says no. Here's the eventlog and the corresponding ACS-log.
    NT
    AUTH 08/19/2004 08:20:27 I 0266 1524 External DB [NTAuthenDLL.dll]: Starting MSCHAP authentication for user [LINEDU\gustomedu]
    AUTH 08/19/2004 08:20:27 I 0266 1524 External DB [NTAuthenDLL.dll]: Attempting NT/2000 authentication
    AUTH 08/19/2004 08:20:27 I 0266 1524 External DB [NTAuthenDLL.dll]: NT/2000 authentication SUCCESSFUL (by METIS)
    AUTH 08/19/2004 08:20:27 E 0266 1524 External DB [NTAuthenDLL.dll]: LookupAccountSidA failed
    ACS
    08/19/2004 08:20:27 Authen failed LINEDU\gustomedu Default Group 000a8aa291a8 Radius extension DLL rejected user .. .. 37 148.136.120.30
    The status right now is that it is working as long as we restart the ACS-server once a day.
    Tommy

  • Tuxera NTFS-3G vs MacDrive / Sharing volumes between Mac and PC

    Hi all,
    I have a number of external hard drives (and am thinking of getting an external RAID array) which I need to share between Windows and Mac OS X. This is not just for backups it is for storing video media and projects (Final cut Pro/Sony Vegas) and working on them. The two sensible solutions seem to be Tuxera NTFS-3G and MacDrive. I'me inclined to go fro NTFS as that is what most of my drives are currently but would like to know what people thing.
    Regards,
    Ben

    Thanks for that,
    Do you know how Paragon and Tuxera NTFS compare.
    In terms of NAS as I am dealing with big video files I dont want to have to transfer everything over a network.
    Ben

  • How do I fix lost connection between Photoshop and Dreamweaver CS4?

    How do I fix the lost connection in Photoshop CS4 to Dreamweaver? When I save for web and devices, Photoshop doesn't save for web but instead saves to the original file in Photoshop. The image doesn't show up in Dreamweaver's image gallery at all. Do I remove both from my hard drive and reload both? I don't want to loose anything in Dreamweaver or Photoshop.

    Not sure exactly what you are asking since I am still a student learning Dreamweaver so I can only describe what is happening in non-technical terms. I have set up files in Photoshop CS4 for images that I plan to use in Dreamweaver as a gallery of thumbs that enlarge using the Behavior panel. I did this with over 100 images, first creating the correct size in Photoshop, then going to Save for Web and Devices, saving, and the image would then show up in my images list in Dreamweaver.
    Now, when I save for Web and Devices, save, it doesn't show up in Dreamweaver. Instead, it saves it back into my original Photoshop file with hyphens between each word.
    I have Windows XP Professional, Adobe Creative Suite CS4.
    I don't know how this glitch happened, I did nothing different and have used the process successfully already over and over. I read as much as I could understand on the Adobe website and apparently glitches do happen but I don't understand how to resolve this. Do I uninstall both Photoshop and Dreamweaver, and reinstall both?
    I very much appreciate assistance!
    Sieglinde Anderson

  • Seperate Volumes between alsa and pulseaudio

    I have pulseaudio running as my primary sound server, and all alsa apps (Sygic Drive in particular) running through the pulseaudio-alsa plugin which works great.
    My problem is that when Drive starts up (Or outputs any audio), it changes the master volume in pulse to whatever volume drive is set to use.
    Example of this is, set pulseaudio to 0%, make Drive output audio, the pulse volume shoots back up to whatever Drive's config is set to change the volume to.
    I have tried changing
    flat-volumes = no
    in /etc/pulse/daemon.conf which gives me an individual volume for the app, yet the app can still mess with the master control in pulse.
    I was wondering, Is there a way to setup a completely different sink that all alsa apps use that has its own set of alsa controls that Drive can mess with, without messing with the pulse master control.
    I.e. set pulse master to 50%, Drive makes audio at say 70%, drive changes the dummy "master" to 70% which would equate to 70% of the 50% of master volume (35% total volume)
    As I only have one alsa app that is causing me this nightmare, I am happy for all alsa apps to use the one set of dummy sinks.
    In basic, I want my alsa volumes completely seperate (but not exceeding) from pulseaudio's. But pulseaudio is still master, so if 50% master volume is set in pulse, maximum is 50% of total volume.
    Cheers.

    I have pulseaudio running as my primary sound server, and all alsa apps (Sygic Drive in particular) running through the pulseaudio-alsa plugin which works great.
    My problem is that when Drive starts up (Or outputs any audio), it changes the master volume in pulse to whatever volume drive is set to use.
    Example of this is, set pulseaudio to 0%, make Drive output audio, the pulse volume shoots back up to whatever Drive's config is set to change the volume to.
    I have tried changing
    flat-volumes = no
    in /etc/pulse/daemon.conf which gives me an individual volume for the app, yet the app can still mess with the master control in pulse.
    I was wondering, Is there a way to setup a completely different sink that all alsa apps use that has its own set of alsa controls that Drive can mess with, without messing with the pulse master control.
    I.e. set pulse master to 50%, Drive makes audio at say 70%, drive changes the dummy "master" to 70% which would equate to 70% of the 50% of master volume (35% total volume)
    As I only have one alsa app that is causing me this nightmare, I am happy for all alsa apps to use the one set of dummy sinks.
    In basic, I want my alsa volumes completely seperate (but not exceeding) from pulseaudio's. But pulseaudio is still master, so if 50% master volume is set in pulse, maximum is 50% of total volume.
    Cheers.

  • [SOLVED] I'm lost halfway between systemctl and netctl in Wifi Setup

    I'm working through the wiki pages Wireless Setup, to wpa_supplicant, and now NetCtl for the past three days. My progression is not continuous--I've jumped around. I can get connected, but I'm not sure what's managing that connection. I'm lost.
    I'm sure any response will help me to determine where I am in the migration from manual to automatic to seamless
    1) The first thing to notice in my setup is NetCtl reports to be managing my wireless network.
    # netctl list
    wlp2s2-MrWizardWiFi //[My wifi device]-[My WiFI's SSID]
    Wifi does connect at startup, but its not connecting with NetCtl profile "/etc/netctl/wlp2s2-MrWizardWiFi":
    #netctl status wlp2s2-MrWizardWiFi
    netctl@wlp2s2\x2dMrWizardWiFi.service - Networking for netctl profile wlp2s2-MrWizardWiFi
    Loaded: loaded (/usr/lib/systemd/system/[email protected]; static)
    Active: inactive (dead)
    Docs: man:netctl.profile(5)
    Sep 13 14:43:24 frylock systemd[1]: netctl@wlp2s2\x2dMrWizardWiFi.service: main process exited, code=exited, status=1/FAILURE
    Sep 13 14:43:24 frylock systemd[1]: Failed to start Networking for netctl profile wlp2s2-MrWizardWiFi.
    Sep 13 14:43:24 frylock systemd[1]: Unit netctl@wlp2s2\x2dMrWizardWiFi.service entered failed state.
    Sep 14 14:12:34 frylock systemd[1]: Stopped Networking for netctl profile wlp2s2-MrWizardWiFi.
    Sep 14 14:12:34 frylock systemd[1]: Starting Networking for netctl profile wlp2s2-MrWizardWiFi...
    Sep 14 14:12:34 frylock network[1108]: Starting network profile 'wlp2s2-MrWizardWiFi'...
    Sep 14 14:12:34 frylock network[1108]: The interface of network profile 'wlp2s2-MrWizardWiFi' is already up
    Sep 14 14:12:34 frylock systemd[1]: netctl@wlp2s2\x2dMrWizardWiFi.service: main process exited, code=exited, status=1/FAILURE
    Sep 14 14:12:34 frylock systemd[1]: Failed to start Networking for netctl profile wlp2s2-MrWizardWiFi.
    Sep 14 14:12:34 frylock systemd[1]: Unit netctl@wlp2s2\x2dMrWizardWiFi.service entered failed state.
    I do get a connection to my WPA router, so I assume its systemctl doing the work. WPA_supplicant must also be working because of the encryption. What else should I be checking to know that NetCtl is ready to take over managing WiFi before stopping systemctl management of dhcpcd and ethernet?
    2) Speaking of migrating my active ethernet connection to NetCtl... I'm Look at the contents of this active ethernet configuration file:
    # cat /etc/systemd/system/netctl@[MyHostName]_network.service
    [Unit]
    Description=A basic dhcp ethernet connection
    BindsTo=sys-subsystem-net-devices-eth0.device
    After=sys-subsystem-net-devices-eth0.device
    This file doesn't compare equally to the example ethernet config file for NetCtl:
    # cat /etc/netctl/examples/ethernet-dhcp
    Description='A basic dhcp ethernet connection'
    Interface=eth0
    Connection=ethernet
    IP=dhcp
    ## for DHCPv6
    #IP6=dhcp
    ## for IPv6 autoconfiguration
    #IP6=stateless
    Are all of the parameters currently handled in this systemctl ethernet file all contained in the NetCtl config profiles (/etc/netctl/example/[profiles])?
    I see NetCtl has other profile examples such as confsection. In addition there are hooks and interfaces which NetCtl processes before the profiles (both directories are empty). How much further do I have in this process?
    What's the next step?
    Last edited by xtian (2013-09-17 21:16:09)

    cfr wrote:...in order to get netctl working, you need to disable anything else trying to manage your connection.
    Thanks for you quick response cfr. NetCtl is working now. You were right. I needed to jump ahead and disable the systemctl services. I was too chicken S#!t to do it after three days of slogging through setup possibilities.
    There are a few points I would make:
    First, the first command sent to NetCtl, as I note in the discussion section,  is "start" early in the page. And later, under the subsection "Automatic operation",  its given as "enable". If you read the manual page "enable" seems the more appropriate first command. 
    Second, consider that users following the wiki pages are likely coming to NetCtl from Wireless Setup where the NetCtl wiki link is under the heading of "Automatic Setup". Automatic is a misnomer. From the perspective of Wireless setup, NetCtl is shown to manage ip, iw/iwconfg+wpa_supplicant, dhcpcd. From the perspective of NetCtl setup, automatic refers to "Automatic switching of profiles" using wpa_actiond and ifplugd packages. Its a fine distinction which makes a difficult state to describe in the wiki or in forum posts.
    //EDIT Broke off the Automatic NetCtl comment so I can close this post...
    Last edited by xtian (2013-09-17 21:15:09)

  • Problem with the voice volume between incoming and outgoing calls

    Hi all.
    I have a situation with volume calls.
    1.- When the calls are originated in the PSTN to the IP Phones, the volume is ok in both sites.
    2.- When the calls is originated in the IP Phones to the PSTN, the person in the PSTN listens very low.
    I try to adjust the volume in the voice-port configuration, increasing the input and output db value, but not if I am doing it well or if I need adjust the configuration in other part.
    The router 2801 have a CCME ver 4, this router is connected to PBX with a E1 and the PBX have the PSTN Digital trunks.
    this is the voice router configuration:
    voice-card 0
    dsp services dspfarm
    voice service voip
    allow-connections h323 to h323
    supplementary-service h450.12
    controller E1 0/0/0
    framing NO-CRC4
    line-termination 75-ohm
    ds0-group 0 timeslots 1-12 type e&m-immediate-start dtmf dnis
    description to the PBX
    voice-port 0/0/0:0
    auto-cut-through
    input gain 4
    output attenuation 4
    playout-delay nominal 200
    playout-delay minimum low
    bearer-cap Speech

    Try using a negative value in the output attenuation setting. My understanding is that negative values in the the output attenuation increases the volume out to the PSTN. Make small adjustments as you increase the chance for echo. Positive values decrease the volume.
    Larry

  • Lost Link Between Library and iTunes

    Hi,
    I have moved my itunes files (iTunes Library, with about 50GB of music) onto a external drive connected to my PC via USB.
    When I open iTunes, it opens as usual and shows the list of all files.
    However, iTunes cannot find the music files in their original location because they are now on the external drive.
    Please let me know how to point iTunes to the location on the external drive where the library file can be found.
    I need iTunes to map all songs automatically. I do not want to locate each and every song.
    Regards,

    I just found the answer. Quite simple.
    Press ALT to display menu.
    Go to EDIT  then PREFERENCES
    Click tab that says ADVANCED (far right hand side) of the pop up window.
    Click CHANGE button where it says: ITunes Media Folder Location
    and browse to location where the iTunes Libary & files are stored
    Click OK - it took a couple of minutes to link the songs.

  • Lost functionality between CS6 and CC2014

    In CS6 if you were zoomed into a photo you could press the space-bar and C to zoom out and treat the window as if it were the navigator pallet... In CC 2014 this option seems to be gone. Is it just hidden or is it really gone and if it is gone where can i request that feature to be added back?

    I don't think holding space and C work like a navigator for me in CS6, CC or CC 2014. However holding the "H" key and using the left mouse button work like a navigator on all three.

  • Lost audio between AIM and IChat

    Hello.
    Up until a few days ago I was able to engage in A/V chats with my dad. I have an IMac G5 using IChat and he has a PC with AIM 5.9. For some unknown reason, I no longer get audio when we connect. I can see him and he can see and hear me, but his audio is gone. Any ideas??

    Hi Ralph.
    Walked my dad through the re-tune procedure in the link. All went well, and during the microphone tune the lighted input bar responded as it should. All indications are that his microphone is working fine. Unfortunately, I still get no audio from him.
    One note of interest. When we first establish an IChat video connection, there usually is a bit of speaker hiss on my end - as if the the PC microphone is connected and ready to transmit audio. However, the minute either one of us begins to talk, the speaker hiss is instantly silenced and I get no audio from him. Then nothing but silence.
    I was beginning to suspect that his microphone/camera was defective. However, given that the tuning procedure seemed successful, I'm not so sure.
    Any more ideas?
    Regards, Michael

  • Lost connection between CTC and ONS 15305!

    I have one ring using ONS 15305 V3.0 nodes. All nodes are supervised by CTC. After a broken cable case, one node could not be supervised. However, I can access that node via CEC 2.2.In network view mode of CTC, I can see that node is logged in but logged out immediately then logged in and logged out again. I can not log in that equipment on-site via Management Port.

    Could you be more specific like what happened will it not let you log in or not even go to that application be more specific and I will try to help you out

  • Lost connection between ipod and laptop

    Hi there,
    Not sure if this is a question for ipod or itunes, but here goes.
    I recently purchased a 5th gen ipod and installed itunes on my 2 PC's and a PC based laptop. All worked fine.
    Now when I connect the USB cable to the laptop, I hear three quick beeps, (not the usual 2 beeps) my ipod starts charging, but I can't see the ipod in itunes.
    When I check device manager, there is an entry with a yellow question mark (labelled ipod) which says the driver is not installed. However when I load the itunes CD, the wizard says no drivers found.
    My ipod works fine on the 2 other PC's.
    I tried system restore but for some reason it fails to go back to any restore points. whether that's part of the problem or a red herring, I haven't a clue.
    Can anyone help?
    Many thanks
    Packard Bell   Windows XP   Easynote laptop

    Could you be more specific like what happened will it not let you log in or not even go to that application be more specific and I will try to help you out

  • I lost connection between Ipod and Macbook Pro Notes when I changed OS from Lion to Mountain Lion.

    I changed OS X from Lion to Mountain Lion and:
    New Mail application has no Notes.
    A new Notes application is available.
    In my Ipod I am was using Note application that normally was sincronized with Mail Note application. How can do a similar job?
    Devices involved:
    MacBook Pro 13-inch, Mid 2010.
    Ipod Touch, software version 4.2.1

    try this:
    open disk utility and verify your disk permissions - if errors are found repair them....
    then go to system preferences - network - advanced - look for the dns tab and enter the dns you see on the image below.  after you've done that, restart your macbook and see if your internet pages loads faster.
    good luck.

  • Lost connection between audio and video

    Hello. Is there anyone out there that can explain why it does this Gyazo - 4c7ff4b6ffe628c097e099abeecab242.png when I'm dragging video, which was recorded toghether in Photo Booth on Mac. I want to drag the video together with the audio. I have done this before but now it just changed? Thanks.

    Select both the audio and video and right-click 'link'

  • "Lost handshake" between G5 and AppleVision 1710

    Please check out this thread...
    http://discussions.apple.com/message.jspa?messageID=3893104#3893104
    Appaloosa Mac Man has been very helpful but I'm scared to "hot swap" these old tubes. Anyone else have any thoughts? (As for resetting the VRAM as a possible fix, I haven't figured out how to do that yet, but I'm working on it.)
    Unfortunately, I don't have an extra DVI-VGA adapter so I can't connect both displays at once.

    Never mind... got it. In very roundabout fashion, I discovered that there is a file in OS X Help, believe it or not, entitled: "I changed my display's resolution and now there's no picture." Booting in safe mode is the ticket.

Maybe you are looking for