Lost wifi connection after 3 seconds?

i've tried resetting my network settings, forgetting the network, etc.
still no luck.
everytime i do connect to my wifi, i have it for about 3 seconds, then it disappears and a 'www.apple.com" page comes up saying the page can't be found.
help?

Try resetting your printers back for Factory Defaults and reinstalling them again.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

  • Lost wifi connection after sync

    having sync my iPad with my iMac I can no longer get wifi connection on my iPad

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • Ipad mini lost wifi connectivity after 8.1

    Can no longer connect on my ipad mini to wifi after installing 8.1.  Tried all the recommended fixes such as rebooting, resetting network settings, even resetting the ipad.  Nothing.

    AFter total restore, it finally came back.  I don't know why except I think it was reading my ip address wrong. I had deleted what was there and finally it just came back. 

  • Airplay mirroring problem:when i change slide mirroring from off to on ,my new i pad lost wi fi connection and apple tv lost wifi connection:ihave last software for both.Can u help me?thanks

    when i change slide mirroring from off to on ,my new i pad lost wi fi connection and apple tv lost wifi connection:ihave last software for both.Can u help me?thanks.
    when i use i pad with apple tv for see my photo,youtube and movies all ok.

    I suspect that the problem is in your router. Do NOT consider your router to be blameless if some other devices seem to work with it.
    Try restarting your WiFi router by removing power for 30 seconds. Don't just turn it Off. On many routers that doesn't really do anything but put the router into standby mode. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
    There is a chance that some services turned on in your router could be causing problems. Look for a setting called QoS (Quality of Service). If ON turn it OFF.
    If you need more help please give the make, model, and version of your WiFi router and how you have it configured.
    See also here: http://www.apple.com/support/ipad/wifi/

  • TS1398 I have problems with my wifi connection after update the ios6 any advice

    I have problems with my wifi connection after update the ios6 any advice

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My i Phone drops WiFi connection after just a few minutes and wont reconnect unless I reset the network settings and reboot the  phone?

    My i Phone 4s has suddenly started to drop wifi connection after nealy months of near perfect connections?
    To restore a wifi connection I have to reset the network settings and restart the phone, this only fixes the issues for around 2-3 mins?
    Other quick fixes like switching wifi on and off/ switching to airoplane mode for a few secconds have no impact.
    This is really annoying as I am using my data allowence very quickly, and as the phone is continually searching for a wifi connection the battery time has reduced dramatically.
    I just wondered if any one else has the same issue, and any suggestions as to how I can fix this.
    Thanks in Advance

    Reboot.
    Restore (from backup)
    Restore (as new)
    Test after each step. If one of them doesn't fix the problem, make an appointment at the genius bar.

  • My Macbook Pro i7 lost wifi connection

    Hi, my Macbook Pro i7 lost wifi connection. I don't know why, but my connection is lost every time. I've other PC, tablets etc. (Windows, iPhone, iPad) and all is ok. Only Macbook Pro i7 have this problem. Some help?

    Well if then, if it is two weeks old, I suggest a trip to the Genius Bar at your Apple Store... it may well be a warranty issue.
    I am sorry I was not able to be any help at all besides WANTING to!
    Were you running your other wireless machines at the SAME time? And you had nobody in the house using  mixers (for drinks or cake and cookie batter) or hair dryers? Clothes dryers....?
    While thinking of Brasil and weather- I saw on our public TV station a few months ago- a story about a fishing boat, I think south of Rio de Janeiro, who encountered a hurricane- and only one fellow lived. Ouch!
    Report back if you can save the link to the page, or the emails of the answers, to tell what the Apple store said...

  • IMac loses WiFi connection after waking from sleep on OSX 10.8.2

    Bought a new mid-2011 21.5 inch IMac this week. It is not re-establishing WiFi connection after waking from sleep. Was happening on OSX 10.7 that it came with, so updated to 10.8.2 and same problem exists.
    I am running a mid 2012 MacBook Pro with Retina Display alongside, on OSX 10.8.2 and no problems at all. Cannot work out what is causing the IMac to fail and neither can Apple!
    Could it be the Netgear Wireless Router 3 years old? Full signal strength!

    Me too!
    I am on a MAC Pro desktop and I am having the same issues. I go to system preferences and just click the network icon. Then I close mail and when it opens it now sees the network. This is getting very annnoying. 

  • IMac drops Wifi connection after 10.7.4 update

    Hello there,
    I am experiencing intermittent wifi connection problems after installing the 10.7.4 update on my 2011 iMac 27".
    The symption is that the iMac drop its Wifi connection after a period of time and when that happens the iMac cannot detect any wifi networks in my area (disabling & re-enabling Wifi on the iMac doesn't help). I have to resort to restarting the iMac to revive the wifi interface. Note that my other devices (including my iPhone and my MacBook Air) can connect to my Airport Extreme without any problems.
    Is there any "quick-fix" solutions out there that can fix this problem? I want to avoid a complete re-install as much as possible.

    Possible short term fix:
    Same issue. Mid 2011 iMac. Updated to 10.7.4 and wifi dropped. The iMac could see any SSID until it was rebooted. My MacBook Air, iPad and iPhone all fine.
    I went to Apple tech support and like others was faced with a slippery resistance to the idea that this was anything to do with 10.7.4.
    Eventually it was suggested I reinstalled Mac OS (switch off, switch on with cmd and R keys held down. Then follow the process. I wasn't hopeful but was compliant. Imagine my joy when, on coming back to me my iMac asked if I wanted to update to 10.7.4. Of course not!
    So reinstalling Mac OS takes you back to 10.7.3. So far so good. Will keep you posted.
    Still hoping fpr a proper fix from Apple but they don't seem to be taking seriously
    in contrast just updated Omin Group's Omniplan (BTW this is great software for the Mac, check out their offering if you haven't). The update notes:
    "It seems as if our fix to the Task: Schedule Inspector in 2.1.1 actually caused more widespread crashes. We've rewritten this code in a more robust fashion and have not seen this problem reappear"
    Owning and fixing the problem - Apple guys please take note!
    good luck
    Guy

  • Lost data connectivity after upgrading iPhone 4 to iOS 5. How to fix?

    Hello,
    I upgraded my 16GB iPhone 4 yesterday from iOS 4.3.5 to iOS 5 and everything went fine after a few failed connections to Apple's servers, however my phone lost the data connectivity completely. Phone and SMS worked fine, I could also connect through wi-fi with no problems, however whenever I tried to use data I got a message that my phone was not signed to an internet service.
    I restored my phone from the backup after upgrading. Not successful. I also reset the network configurations. No deal.
    My carrier is Vivo (Brazil) and everything worked fine prior to the upgrade (and after the downgrade).
    I imagine it can be a problem with APN configuration under iOS 5 and I tried to configure it through a webpage, but I got a message that my phone already had a APN config (profile) and could not install another. Under Settings>General>Network I don't have the "mobile network option" nor the "profile" option.
    Any thoughts? So far I haven't contacted other people under my carrier who upgraded to see if they had the same problem.
    Thanks for reading,
    Samuel

    I got a workaround; it's not what I wanted, but it solves the main problem.
    I noticed that I only lost data connectivity after restoring from backup after the iOS 5 update. So what I did was to backup my phone, restore again to iOS 5, configure as a new phone and backup again (with nothing in the phone).
    Then I launched an iPhone backup utility software, in this case, iBackupBot, which in the trial version is enough for what I wanted. I opened the old backup and exported only the files I wanted (like call history and SMS history), then I imported these files into the new backup and restored from it.
    I lost my media files (which I copied before) and some configurations, but the most important itens, like SMS, I managed to export from the old (complete) backup.
    Message was edited by: samuelsam

  • 7510 e printer looses wifi connection after each print job;

    7510 e printer looses the wifi connection after each print job; only switching wifi off and back on at the printer touch screen makes it reconnect. Tried more or less everything, including downloading updated software for the printer. Wifi router (unfortunately) is provided by internet provider. WPA2.

    It sounds like the printer may have an unstable wireless connection.
    What brand and model is the router?
    Have you tried setting a static IP address?  I recommend setting a static IP address as it can resolve a lot of networking issues with printers in general.
    The steps to do this are located in step 6 of this document from HP.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Oficejet Pro 8600 Premium lost wifi connectivity to printers

    Yesterday morning, I lost wifi connectivity to my 8600.  I tried to delete the printer from the computer and then added it.  I tried this through the control panal as well as from the HP utility.  (I had to delete the port to re-add it in the add printer process.)  I reset the printer by going through the wifi set-up on the printer again.  I turned off the router,unplugghted it, turned off the printer and unplugged it, waited a minute, plugged the router in, turned the router on, plugged the printer in, turned the printer on - still no success.
    I checked the router and it displayed the printer info and said the wifi connection to it was active.
    The wifi icon on the screen shows active. 
    The little blue wifi light next to the left of the screen was blinking initially and then was steady but seemed very dim.
    Wifi in setup is on.
    As the problems occured on all 3 of my computers at the same time, I am quite sure the problem is on the printer side.
    When I connect a cat 5 cable between the router and the printer, the wireless laptops can get to the printer. 
    Any help would be appreciated

    These settings are for setting up your wireless printer to stay connected to your router, keep wireless devices better connected and make your router secure and hack proof.
    1. Set a static IP in the printer (click here) outside the DHCP range of the router (check your manual). 
        This is for Linksys routers but can be used for all routers.  Verify your DHCP range and change this
        first if needed.  More Wireless Printing help is here.
    2. Verify in the printer that 'Auto Off' is disabled.  Use the Embedded Web Server (EWS) by going to the  
        printers IP address in your browsers address bar, click  Settings Tab/Auto Off.  Or use the Printer
        Assistant, Printer Home Page (EWS). 
    In the router:  (Refer to your router manual for information)
    3. Use a fixed wireless channel like 1, 6 or 11, never 'auto', try channel 1 first then the rest. 
    4. Set router to 20Mhz only, or 145Mbps depending on router. 
    5. Always use WPA2-AES (Personal) encryption, but you can try ‘mixed’ mode. 
    6. Disable WPS and never use it and disable UPnP for the routers security.  Nobody can hack your
        system now and helps with wireless connectivity (if you want to know why, search the web). 
    7. If you have a dual band router (2.4Ghz and 5.0Ghz bands), make sure the SSID’s are NOT the same,
        they must be different for all bands, even for any Guest networks. 
    8. Save all settings.  Power off both, wait 2 mins.  Power on router wait 2 mins. 
    9. Power on printer and verify it reconnects to router. 
    Windows 7/8/8.1   Is Network Discovery on or off?
    Control Panel/Network and Internet/Network and Sharing Center/Advanced sharing settings.
    Under Home or Work (current profile) / Network Discovery.
    Select "Turn on network discovery" and save changes.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • I've lost internet connection after a power outage; how do I restore?

    I've lost internet connection after a power outage; how do I restore?

    Check with your internet provider for help.  Your modem or router could have been damaged if they did not come on after the outage.  If your modem and router look OK all you should have to do is restart your iMac. 

  • Do you have the way of fix WiFI connection after restart on unlock the macbook pro

    do you have the way of fix WiFI connection after restart on unlock the macbook pro with retina

    Toddy, see [http://news.cnet.com/8301-30685_3-20004620-264.html?tag=mncol;txt]

  • Lost wifi connection with Airport Extreme.

    Lost wifi connection with Airport Extreme.   When I connect my modem directly to the computer I can access the internet, however as of this morning I am no longer able to access the internet via wifi on my airport extreme.  I have been using  airport extreme for 6 months or more and everything has been working fine.
    When I diconnect my  airport extreme and reconnect it I get wifi for 1-2 minutes working fine, but then i lose internet connection.  According to airport Utility everything is setup and connected and working ok, but I still am not able to access any webpages over wifi. 

    I have the same issue, I'm getting droppeds from wireless constantly

Maybe you are looking for

  • Not installing. Please help.

    Attempting to install the Illustrator and Dreamweaver. Each time error says  ERROR: Third party payload installer vcredist_x64.exe failed with exit code: -2147024546. Another error message says I failed to install Microsoft Visual C++ 2012 Redistruba

  • Howto set ImageBase when one cannot deply to  /webapp

    I am using the BC4J html generating classes and WebBeans. I see absolute references to /webapp/imaages in the generated HTML. I cannot deploy to a top-level context on that server, so I am wondering if there is a setImageBase() method or some paramet

  • TCodes in single stack

    Hi, Can you please tell me the following 1.In single stack, how to check queues the way we do it in SMQ1 and SMQ2 in dual stack? 2.Also how to use ABAP tcodes like SXMB ADM and SM58, IDX1,IDX2 in single stack? 3.Documents or blogs about PI7.4 Thanks

  • I only print the top line and bottom line, content in middle doesn't print

    When I print an email only the very top line at the top of the page prints and the very bottom line at the very bottom of the page print. For example the bottom line says page 1 of 1 and then on the other side the date and time. Top line has the web

  • FCPX ISSUES AFTER INSTALLING LATEST UPDATE

    Well, I updated FCPX and now it won't let me SHARE.  Any ideas.  thanks, Jeff