Lost wireless after firmware update

I updated the fimware on my WRT160N v3 and followed it up with a reset of the router. I then restored the router settings that I had saved. All the settings appeared to be good, but none of my wireless devices would connect. I reneted the pass phrases (WPA2) but still nothing. Tried to change the passphrase, still no good. I then did a factory reset of the router from the setiings page and manually re-entered and save the settings, again nothing. All of my devices are able to "see" the network and the correct SSID. Not sure what to try next.

If still that does not work follow the following steps:
30/30/30 Hard Reset
The following procedure will clear out the NVRAM and set Router back to default values:
With the unit powered on, press and hold the reset button on back of unit for 30 seconds
Without releasing the reset button, unplug the unit and hold reset for another 30 seconds
Plug the unit back in STILL holding the reset button a final 30 seconds....
Then reconfigure the Router once again and then check the concern....

Similar Messages

Lost Internet after firmware update!

I have use this router some years, and I have no problem, then I have made an Firmware update, and now sometimes I have lost internet, not connection but only Internet. Can I get a default firmware or where is problem?

I have also had problems connecting to the internet
I upgraded my WRT54G version 2 router's firmware to 4.21.1 last week, taking the opportunity to upgrade after the area I live in suffered a temporary power cut, which somehow caused my router settings to reset, even though the router was not switched on at the time.
Since upgrading I can connect wirelessly to the router, but I cannot access the internet via wireless. I am using exactly the same settings as I did before the upgrade and also made a backup of these settings after the upgrade, but every day I attempt to connect wirelessly I lose my net access again (but by restoring the backup settings - the very same settings already held by the router - I regain my net access, but then the next day I have to repeat the whole process.
Yesterday I tried disabling the wireless security, which allowed me to access the net again, but soon as the security is re-enabled, the problem reoccurs.
I have a laptop, a desktop and 2 PS3s connecting wirelessly via the router and have had no problem with any of them until this upgrade. I have just reapplied my wireless settings & will try again tomorrow and will attempt using a wired connection and post an update as soon as i'm done.

Lost Contacts After Firmware Update

Hi,
I'm after a bit of help if anyone has any advice. I flashed my N900 this weekend with the latest firmware update (it was Vodofone specific so had to flash it to the latest UK version). I restored the backup after completing the firmware update and everything was great. Hooked it up to PC Suite, ran the sync and it matched all 300 contacts.
Last night I tried to edit a contact detail and it kept coming up with an "internal error" message. I managed to do it by chaging the detail on my PC and syncing the contacts. But today, when I looked for a contact my whole contacts list is gone! It's wierd because my recent call history still shown names, but my contacts list is empty. I synced my phone when I got home from work, but Nokia PC Sync completes the sync but I still don't see the contacts on my phone. All the contacts are on the PC still.
How can I fix this? Any help will be much appreciated. Thanks.

No, none were on the sim card. I ran the backup before the firmware flash and then restored after the flash. That was fine for a couple of days, but now I have no contacts showing in my contacts list.
When connected to PC Suite I can see all of the contacts from the PC, but when I look on the phone the list is empty. This is why the sync isn't doing anything because the PC can still see all of the contacts.

Lost Bluetooth after firmware update 2.0.1

After updating my 15" MacBook Pro with a Broadcom chipset I have lost the Bluetooth hardware. If I go to System Profile it says "No information available". If I try and do a Bludtooth set up in system Profile.... Network it says the system has no Bluetooth hardware. Any thoughts?

Have you tried a simple restart? My bluetooth has been known to wander off at times (not on the Air but on my PB G4). You can try resetting the SMC: http://support.apple.com/kb/HT1411. This has helped me in the past.

Lost dictionary after firmware update...

any one can help me get back dictionary for nokia 6131
Malaysia
Nokia 6131
Code: 0534295
From
v03.72
29-06-06
RM-115 (c) Nokia
to
v05.50
20-09-06
RM-115 (c) Nokia
Help me plsMessage Edited by kiattz on 10-Apr-200706:51 AM

You can get the Chinese-English dictionary at the Nokia Asia Support site.Look for the Nokia 5300 Support PageLP.Message Edited by nj15 on 10-Apr-200711:49 PM

Data recovery after firmware update

Hi guys,
does anyone know it it is possible to recover data after firmware update in N8? some data are preserved (videos) and some are lost (photos).
thx.

if you didn't backup them, there is no way to recover them
Greece Nokia X6 RM-559 v40.0.002

3014 error i can't restore ipad after firmware update attempt

3014 error i can't restore ipad after firmware update attempt

See this thread with the same question.
https://discussions.apple.com/thread/5045573?tstart=0

After firmware update to V2.0.03, the web UI dos not look right. (WRT160 V2)

Hi
After firmware update from V2.0.01 to V2.0.03, the web UI dos not look right.
I can't see menus, just version number and the basic setup page.
Router Linksys WRT160 v2.
Allan

Hi
Thanks for the reply.
I't works ok now.
Thanks again.
Allan

Restoring after firmware update - Ways :)

Hi All,
Nowadays we are receiving quite a few complaints that customers are unable to restore the application after updating their firmware. I would like all to discuss to come up with some ways to restore their applications after firmware update.
Before updating firmware
Customer can backup his phone using Nokia PC Suite's Content Copier application.
He can store his Contacts and Messages using Nokia Communication Centre as .csv file or .txt file.
For his Contacts he can sync with pc suite supported sync applications.
Messages he can store in Memory card and he can make a backup of memory card in PC.
If he is using Nokia PC Suite for his Multimedia items he can use Image Store if he is using Nokia PC Suite or Nokia Photos if he is using Nokia OVI Suite.
For Music he can use Nokia Music Manager or Nokia Music.
Once after updating his firmware, if he is unable to restore he can get those from above said applications.
If his calendar entries are not restored(as in case of some of Nokia e 71s and Nokia N 95/95 8 GBs), for God's sake if he has got one more similar device(or device having switch application on phone), he can restore the backup file to another phone having switch application, then he can transfer his data (Contacts, Calenders etc ) to his original phone
Dear Forum members, if you have got any other work around please let me know regarding the same, which will help our customers

Hi,
If you have issue in Nokia PC Suites, [subject to your phone's compatibility with Nokia OVI Suite 2.0.0.10 ],
you can install Nokia OVI Suite 2.0.0.10 and check if you can take backup and restore it later.
Also i would suggest to use USB for taking backup, since it will be faster than Bluetooth. Also you can select one category at one time(say backup contacts alone, then Calendar, then messages etc and so on ....)
Its better to skip memory card backup while backup-ing other Phone data for faster backup. Memory card backup can be done separtely(since it wont be affetcted while updating firmware, users can safely remove memory card while updating firmware)
Nowadays though recent phones has got UDP(User Data Prevention i.e., even if you update your phone's firmware, your data wont get erased ), still it is recommended to backup your phone data.
Hope this could help
I welcome our experts to add more details related to this topic.

Problems after firmware update 52.0.007

Hi,
I got my phone back after the shop fixed a problem and updated the firmware to the latest version 52.0.007.
But now I have following problems:
I can't get the calendar anymore to show up on the homescreen, even after checking the checkbox to do so
The Radio app. is gone
Does anyone has a solution for this?
Iwan

It may sound crazy but sometimes you need to "hard reset" device after firmware update (beware all data erased) by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by yourself). Sometimes UDP = User Data Prersevation feature of 5800XM can carry over corrupt entries when updating.
Happy to have helped forum with a Support Ratio = 42.5

There was add one and i lost it after the update and i don't remember it's name

there was add one and i lost it after the update and i don't remember it's name
it was add-on to show me the source of any click able content
like pics on twitter or Facebook
also the videos on youtube
and it showed a little icons with small pic shape on it with different colors
and also sometimes with a small lock shape on it
now i need to know what this add -on name or how to get it back

Add-ons are not auto-deleted as far as I know...
It's possible that the extension or userscript simply doesn't work correctly in Firefox 22 due to a change in Firefox. If you look at the add-on pages, often the reviews will mention whether the add-on is broken in a new release.

Ovi Maps 3 don´t start after firmware update (6220...

Hello!
a few days ago I installed ovi maps 3 on my nokia 6220c and it works well. Later I updated the firmware from version 03.06 to 05.15.
After firmware update ovi maps don´t start-> "Cannot open application. Install latest version from nokia.com/maps."
But Nokia Map Updater says, there are no updates for my maps.
What´s wrong?
Can I reinstall Ovi Maps 3? Or is it possible to install Ovi Maps 3 new?
thanks

Hello!
The Map Updater said: "there is no update for your phone" ...because maps 3 is already installed.
But in the meantime I have found a solution!!
I downloaded maps 2.0 from the German nokia page and installed it. Later I started Map Updater and could update to Maps 3 and now it works!!!
I think the problem was: I first updated to Maps 3 and later updated the firmware. There was any older version of fixes included in the firmware update, so Maps 3 was damaged...
thanks
sorry for my bad English

Aluminum Wireless Keyboard not working properly after Firmware update 1.1

Hi,
Well, as the subject says, my keyboard is not working properly after I updated the firmware. The problem is that several keys (delete, down arrow, brackets and apostrophe) stopped working right after I installed the update. I never dropped it or hit it. And I did not stop or interrupt or did anything during the install. I take very good care of it.
I have already tried toubleshooting with the support page, restarting the iMac, taking off the batteries, setting it up with bluetooth again, going back a week with time machine and to reinstall the firmware. So, if you have something new for me to try, I will really apreciate it.
Thanks in advance.
Franco.

I have 24" iMac with the Apple wireless M&KB - I know this is basic but have you tried a fresh set of batteries? My KB will refuse to establish connection when batteries are on the weak side the firmware update may just be a co incidents. If your wireless mouse is working OK then I would guess the blue tooth is functioning.
Not sure about the 10.49 download - are your other file downloads completing properly? Are there any error messages?
Steve

Aluminium Wireless Keyboard Wakes iMac After Firmware Update

Hi All,
Not sure if anyone is experiencing the same problem, but when I put my iMac to sleep now, it wakes up randomly saying that it has lost connection with my keyboard. I have had zero issues since buying by computer, and I really dont want to have to uncheck the 'allow bluetooth devices to wake computer' option.
Is there any way to downgrade the keyboard firmware?
Apple support please help!
Thanks,
Rob

I also have this problem. Since I have a wireless mouse I just turn off the keyboard when I'm done using it, and use the mouse to wake the computer. Since I've started doing this I've checked the Console for abnormal wake events in the mornings, and none have occurred (in the past couple weeks). I would have at least one a night when I left the keyboard on. I didn't notice it before the last firmware update (don't know the number right off), but it could have been occurring before.
Also, many times when I put my computer to sleep with the keyboard or the mouse, it will immediately wake back up. I've also noticed that when the keyboard is off this doesn't happen.

Airport no longer working after firmware update

Before i get to my question, i think that it is necessary to give a bit of background as to why i have set my network up the way i have.
I recently moved in with my girlfriend and brought my broadband package with me as i would have to pay a fee to cancel my contract within the contract period.
This would be all well and good except that in the new location, the service provider can only supply broadband via an ADSL phone line (provided by a seperate telephone company) furthermore they (Virgin Media - i'm gonna name names) provide a cheap USB only modem - which in turn is only compatible with PPC Macs.
Fine for me, but not so great for my girlfriend who has an Intel Mac Mini and not so great for my new Airport Extreme which of course requires a modem with an ethernet connection.
Bearing in mind that it's just after Christmas and i can't afford to just run out and buy an ethernet modem or change my ISP - i thought that i would try something out.
With the USB modem connected to my old PPC G4 i then connected the ethernet cable (that i had connecting our two Macs allowing them to share the internet connection) - from my G4 to the WAN port on the Airport...
Now i'm a real networking newbie so i was a little suprised when suddenly and effortlessly i had created a wireless network that the Mac Mini and our iPod Touches could see and use. I set up security etc and all was well and good...for two days.
Then Airport received a firmware update and now it doesn't work and resetting the Airport doesn't help.
So now i have to get my hands dirty and like i say, i know jack about networks or the terminology.
With this configuration - and obviously we know that it can work (somehow!)
should i be in bridge mode or sharing a single IP address? and just how am i connecting to the internet. Static IP address/DHCP - PPPoE? I know what these abbreviations stand for but i don't know what they mean.
In the course of 'playing around' with the settings i have seen a message saying that Airport has an invalid I.P. address - why is it invalid and is that only because of something that i have changed or is that the route of the problem?
All the machines can see each other and the only clue i can provide is this log extract.
Jan 19 01:05:31 Severity:5 Initialized (firmware 7.2.1).
Jan 19 01:05:34 Severity:5 Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
Jan 19 01:05:34 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:05:34 Severity:5 Rotated TKIP group key.
Jan 19 01:05:42 Severity:5 (WAN) link state is Up.
Jan 19 01:05:49 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:05:54 Severity:5 Associated with station 00:1d:4f:e3:87:17
Jan 19 01:05:54 Severity:5 Installed unicast CCMP key for supplicant 00:1d:4f:e3:87:17
Jan 19 01:06:04 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:06:19 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:06:19 Severity:5 Connection accepted from fe80::203:93ff:fe77:a4b0%vlan1/49186.
Jan 19 01:06:34 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:06:49 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:07:04 Severity:3 No Address for NTP server time.apple.com.
Jan 19 01:07:08 Severity:5 Connection accepted from fe80::203:93ff:fe77:a4b0%vlan1/49187.
Jan 19 01:07:09 Severity:5 Configuration updated.
Jan 19 01:07:09 Severity:5 unloading current configuration.
Jan 19 01:07:17 Severity:5 Deauthenticating with station
...and so on.
I'm hoping that some networking guru is reading this and can provide me with a few pointers.
Can anyone help? I've been struggling with this for days now.
Thanks in advance.
Steve.

Your setup is convoluted, but it should work. A few comments:
1. The base station should be configured to get an IP address using DHCP, which it will get from your PPC which (with internet connection sharing turned on) is now acting as a DHCP server.
2. The base station should be configured in bridge mode, since your PPC (with intenet connection sharing turned on) is now acting as a router.
3. I suggest you should turn off the network firewall on the PPC as long as your are running this sort of setup. Not ideal, but it will prevent all sorts of connectivity problems between the internet and everything downstream of your PPC's ethernet port.

Lost wireless after firmware update

Similar Messages

Maybe you are looking for