Lot not show in MMBE quality insspection

Dear expert
i make planing for halb material against 04 origin and also active inspection 04 or lot will be generated against 101 movement type. Now lot will be show on QA32 but not shown in MMBE in Quality inspection its quantity show only unrestricted stock.
i want to show this quantity in quality for MMBE
Because quality inspector take decision
Please guide me
Regards
Priya
Edited by: sapqm01 on Aug 26, 2010 12:57 PM

Dear Vishal
Thanks a lot. Now i understand thanks again and again
regards
priya sharma

Similar Messages

Made a UD to 'Scrap'. But Stock Category is "Q" and does not show in MMBE "Blocked"..WHY?

Hi,
I made a UD of an Insp Lot to 'Scrap' in the Inspection lot stock tab.
The system automatically created a material document with movement type 553 (Direction -) and 551 (Direction +)
However the stock Category in the material document is "Q". IS THIS CORRECT? SHOULD THIS BE "S" (This is in the WM tab of the material document).
Also when I query MMBE after the above UD to Scrap, the batch quantity is not shown either in Quality or Blocked stock. IS THIS CORRECT?
Please advise.
Regards
Priyanka

My understanding was when I input a quantity in 'Scrap' field during UD
1) The stock should be blocked (hence it will show under blocked stock column in MMBE)
2) The stock category should be "S" and not "Q"
I agree that in MMBE based on your explanation the stock should not be shown in blocked.
But can you explain why the stock category is "Q" instead of "S"
Regards
Priyanka

Stocks level not showing in MMBE

Hi experts,
I have created stock in MB1C with quantity 500 and it showed document 1 posted instead of ref no. before doing consignment i checked with MMBE but in unrestricted use nothing it is showing.. can anyone tell me what will be the error ? and how to resolve this..
Regards,
S.Govind

it showed document 1 posted instead of ref no
Not sure on this what do you mean by reference number. Normally, once you post any inventory via MB1C, system will generate an internal reference number which is nothing but material document reference which can be seen in MB03.
Assuming that in MB1C, with movement type 561, you would have uploaded the stocks, it should have been in unrestricted. If you are unable to see in MMBE, check in MB51 just by maintaining the Posting Date.
G. Lakshmipathi

PO RECEIPT ISSUE-REceived material not showing in MMBE.

Hi All,
The problem is after receiving in the PO's that have the"yellow icon box", the "material movements" of MMBE & the "on hand quantity" of MMBE are not being reflected. The history is reflected in MMBE. It is not however showing up on "material movements" and "on hand quantity" in the MMBE transaction as it should. None of these items can be issued because the system says there are none "on hand" even though they can be received in.
"yellow icon box"--> It is a yellow cube(filed name Determine all stock) which comes up in between the Storage location field and "EUn" filed in transaction MIGO. Sorry i couldnt attach the screen shot.
Pls let me know if any clarification is needed.
Thanks:
Siddharth
Edited by: kumar siddharth on Dec 19, 2008 4:00 PM

Please check the following:
1) Does the PO have account assignment category? If yes, the material is charged off and will not come into stock.
2) The movement type used to receive in MIGO. Is it 101 or 103 or 107? 101 will bring it in stock, but not the other two - unless you have done 105 or 109 afterward.
Hope this resolves,
Lakshman

Placed images will not show in High Quality

I have several documents that have raster images placed in them. The images are 300dpi, saved as EPS, CMYK, preview of 8bit Mac, maybe around 25mb. I place them in InDesign, and choose the "rasterize postscript" option. When the image is placed, it looks awfully low quality. If I choose "High Resolution Display" the image becomes a *little* bit clearer, but not FULL quality. Enabling overprint preview also does not do anything. I can only get maybe 2/3 of the actual pixels of the image. I can NOT get the FULL resolution of the image. Yes I have checked my document prefs, application prefs, set them to full res in display.
I have personally replicated this problem on 2 computers (G5 and Mac Mini) and it was first shown to me a couple weeks ago on a totally different Mac Mini. I can replicate this problem with multiple images on multiple documents, including new documents using the place command. Resaving the file as a PSD seems to allow me to see the full resolution. But I cannot do that for the amount of files I need to process for my company's workflow (2 million images).
Does anyone have any ideas? Is there a limit to the resolution of the HQ display in InDesign (like 200dpi)?

Why are you using the EPS format at all?

Anyone know how to remove Overdrive books from my iphone that have been transferred from my computer? They do not show up on itunes. I see a lot of answers to this question but they all are based on being able to see the books in iTunes.

How do I remove Overdrive books from the library that were downloaded onto my computer then transferred to my iphone? The problem is that they do not show up in iTunes.
I see this question asked a lot when I google, but they always give answers that assumes you can find the books in iTunes either under the books tab, or the audio books tab or in the music. They do not show up anywhere for me. They do not remove from the app like the ones I downloaded directly onto my iphone.the related archived article does not answer it either. I even asked a guy working at an apple store and he could not help either. Anybody...?
Thanks!

there is an app called daisydisk on mac app store which will help you see exactly where the memory is focused and consumed try using that app and see which folders are using more memory

Why does adobe photoshop elements 6.0 not show up for a download choice of putting my photos into my computer, I'm on windows7. I'm sure it did when I first got my computer. Could it be that I have lots of other photo software that may be interfering?

why does adobe photoshop elements 6.0 not show up for a download choice of putting my photos into my computer, I'm on windows7. I'm sure it did when I first got my computer. Could it be that I have lots of other photo software that may be interfering?@@

If you open the Organizer and go to Edit>Preferences>Camera or Card Reader, do you have Auto Launch Adobe Photo Downloader on Device Connect checked?
Try checking that if you don't.

UD Insp. Lot stock tab is not showing

Dear Friends,
At the time of UD Insp. Lot stock tab is not showing due to which I am not able to withdraw sample qty ,
can anyone explain how to add this tab.
Reg: T.code - QA11

hi sandip
UD inspection lot tab page will not appear if you have created the inspection lot manually and the lot is <b>not</b> stock relevant
regards
thyagarajan

I'm trying to export a file as .dwg for Autocad but it's not showing the dwg preview and it appears to be saving as code (lots of gobbledegook when reopening the file). I'm on OS 10.5.8. Never had a problem with this before. What am I missing? Any idea

I'm trying to export a file as .dwg for Autocad but it's not showing the dwg preview and it appears to be saving as code (lots of gobbledegook when reopening the file). I'm on OS 10.5.8. Never had a problem with this before. What am I missing? Any ideas?

First be sure login and password are OK. Sometimes the address starts wit "http://..." and sometime starts with "ftp://...". Try both normal FTP access and Scure FTP access (SFTP). At the end, contact the site's provider.

Adobe Premier Pro cs4: Maximum render quality not showing in drop down menu in Export screen

I have been trying to export a movie with settings i previously used but for some reason the Maximum render quality option that comes from the drop down menu next to video audio filter multiplexer etc is not showing up.. will someone plz tell me how to fix this...

Maximum render quality was introduced in an update for Premiere Pro CS4. Choose Help -> Check for Updates.

QA16 not showing 03 inspection lot

Hi All ,
I am trying to make collective UD for 03 inspection type lots with QA16 . These lots contain long term MICs also . But when I am executing the tcode I am not able to see the lots in list for a particular material .
1. In QA16 , checkbox for "include long term mic" selected .
2. In RR , all results have been made and are with status 5 .
3. These inspection lots are related to inspection points .
Also when I execute QA40 , then these lots gets saved with the UD . Can anybody help why in QA16 , I am not able to see lots for this material .
Regards

Hi
Yes all results are passed . For one material its not showing the lots . Also for other materials lots with REL CALC status are also displayed in QA16 .

Signature is not showing in Quality Server but appearing in Dev. Server

Hi Experts,
I have created a Sap-script in which I have given Signature using SE78, creating the file in .BMP format and then using Inclulde command in SAP_SCRIPT editor.
Later we have send that Script to the Quality Server where that Signature is not appearing. Could please anyone tell me the coz and soluation of it.
Early responses are most welcome.
Regards,
-=Maddu=-

Thanks Amit for neat and clean reply for this issue. Yes the problem was that this logo was not available in the Quality system and later I used SE78 and given the same name which was present in the Layout Include command.
Do I need to repeat the same step for Live Server also ?
Please suggest.
Many Thanks.

CS3: Bridge does not show dng-files

First it started to refuses to show NEF files, and now, it will not show dng files - or at least some of my dng files.
What the H.... is wrong with this crap?

But I do not understand, why Bridge suddenly cannot see them - when it could a couple of days ago
CS3 is known for being the worst version of Bridge with very strange behavior. Might be preferences or cache related or some other strange reason. Fact is that using old software for new digital cameras has the only advantage as being cheap. You do miss a lot of functions, options and especially quality for developing your Raw files. CS6 has a complete new Raw process version called 2012. And since you use CS3 you still will be at process 2003 and already missed process version 2010.
So you seriously should consider buying CS6 ( you missed the option for an upgrade since this was shut down per december last year due to new upgrade policy) if you want to get the most out of your expensive new dSLR

Manual Reorder point planning stock is not showing in MD04

HI,
   Would any one help me when i plan for reorder point planing the details furnished below.
Mrp type: V1
Lot size :HB
ROP : 30
Max stock level :1000
in Material master settings.But when i run the MRP using MD03 system is not showing available stock in MD04.It is showing 0 stock rather it would show 4 (MMBE un restricted stock..)
What are thesettings required or any thing missing in IMG. Please help me in this.
Regards,
Srini

Srini,
You may also want to check if the Unrestricted stock is in a storage location that is excluded from MRP.
On MD04 you will then see a separate line item at storage location & the Qty =4 should appear as shown below.
12/02/2009     Unrest Stock                                                       12           12
12/02/2009     SLocSt     QANN StLoc: not plnd          0           8     QANN
12/02/2009     SLocSt     VEND StLoc: not plnd          0           0      VEND
Hope this helps. Good lcuk.
thanks,
Ramm

Batch not showing at QA32

Hi,
We are facing one problem regarding batch....
Material is maintained in batches, batch entry 1, inspection type 03.
At process order stage we are entering the batch no before releasing the order. Batch no is generating and going to the database. But at QA32 stage it is not showing on the screen.
Can anybody pls tell me the reason.
Regards,
Rajesh

Dear,
As per standard SAP For inspection type 03 there is no stock posting will happend for 04 insp type so system will display the batch as stock posting is there for batch material.
Not relevant for stock means that the inspection lot with inspectin type 03 does not put stock on quality hold .
Hope clear to you.
Regards,
R.Brahmankar

Lot not show in MMBE quality insspection

Similar Messages

Maybe you are looking for