Lot of z fields bad effect to project-remedy

Hi Experts,
We are adding many Z field (around 160) to CRMD_ORDERADM_H and CRMD_ORDERADM_I. Up to my knowledge, these Z fields will update lot of structures and tables.
I have one doubt that u2018will all z fields going effect project anywhere badlyu2019. What are consequences I need face due to lot of z fields and what is the remedy I need to take care.
SUGGESTIONS ARE HIGHLY APPRECIATED
Thanks
Chand
Edited by: chand shaik on Aug 11, 2009 1:46 PM

peterg wrote:
1. Is it a bad time to build a new editing workhorse with Haswell-E just around the corner? It seems the socket and chipset are very close to EOL and an 8 core Haswell-E might be a significant upgrade again.
Any downsides to this?
Did you know that you can now build a single processor 8, 10, or 12 core machine now? Just one 2011 LGA motherboard manufacturer that will accept the Xeon E5 v2 chips are the Asrock x79 motherboards.
Message was edited by: Bill Gehrke

Similar Messages

What are the bad Effect of changing sap Standard Programs?

Hi all,
I want to know what are the Bad effects of changing SAP standard screen and reports.
I need a bit theoretical Explanation.
Please suggest me some good and effective matter link.
Regards

Hi sonal,
If I write the theory here ,might be its going to mess up here.mm..try this link.There are good information in changing a standard functionality.
http://software.feedfury.com/content/28535477-changing_the_sap_standard.html
2. I can tell one of like ...
To change a standard program or functionality or standard field in sap,we have to go for related user,customer scvren exit etc.
We have to find the right exit to that particular transaction and do our customized coding there.We have to be very careful,since we are going to change the standard exit.this user exit will be used in 'N' number of other screens and transaction.So when you change , that change will /may affect the other transactions also.If you corrupt that particular exit,there are chances for that transaction to go for a toss.I have experianced this personally.when I was working on particular userxit and editing,that particular transaction was not working properly for others,since i was doing from my login,everyone came to my place and started bugging me to stop working on it:)
Regards,
SanthoshSivanathan

Export problem when using a lot of large medias in a premiere project.

Hi !
My premiere/media encoder have a weird comportment when I use a lot of large media in the same project :
- has I import more media (avi uncompress out from aftereffect) in my project, my exports are getting slower and slower (lag before the progress bar start moving)
- the files I export are getting bigger and bigger !
- when I reach about 20 gigs of total medias size, I'm totally unable to export with media encoder (the software freeze after I launch the queue) and have to open the project in after effect to do the export (with the same weird lag before the progress bar start).
I have to precise that I'm aware that longer montages are heavier once exported.
I'm speaking of exporting 30sec montage, same sound, comparable background, colors, image type and camera moves.
the only difference is that in one of the montage I use 3 footage and in the other 14.
The weight of the export (FLV in most of my tests, but the same thing happen in mp4, f4v...) is sometime 3X the expected weight.
Exporting the video uncompressed and then compressing the it with media encoder (FLV birate 700) give the same result (a 10meg file) and a weird lag before the progress bar start moving.
Exporting the video uncompressed and then compressing the it with sorenson squeeze (FLV bitrate 700) give a good result (a 3meg file).
I have to use 720p uncompress media for my montage as the video would be use for television, not only internet.
I tried to export the file with other computer and have the same result.
I'm working on a PC, intel core2 quad CPU Q6600 2.40Ghz. 12GB of RAM, winvista 64bit,
graphic card : Nvidia quadro FX 570 256mb
Thank you.

which operating system?

Using ms project 2007 and vba macro to list all the custom fields used in the project?

Hi,Using ms project 2007 vba macro, I would like to be able to list all the custom fields used in the project and their corresponding field names. e.g. let us say I create a calculated duration field and name it "expected duration" and the name
of the field I select is Duration1.
I am trying to write a macro that will list all the used custom fields such as the result would look like:
Duration1 ---> "expected duration"
Text1 ---> "anything"
Flag1 ---> "....."
Number1 ---> "..............."
Can anyone provide me with the solution?
Regards,
Chuck

John,
I found this module, which provides the the list of custom fields used in the project but does not provide the name given to the field. Here below is the module and hope you could help me achieve this by modifying the macro to list the renamed field.
' MSP Checks all Custom Task Fields
Sub checkfields2()
'This macro will check and report out which custom task fields are used
'It requires Project 2002 and above as it relies on the GetField
'and FieldNameToFieldConstant methods which were not introduced until
'2002.
'It does not include resource fields, however it is a simple matter to
'do it by replacing the pjTask constant with pjResource.
'Copyright Jack Dahlgren, Oct. 2004
Dim mycheck As Boolean
Dim myType, usedfields As String
Dim t As Task
Dim ts As Tasks
Dim i, it As Integer
Set ts = ActiveProject.Tasks
usedfields = "Custom Fields used in this file" & vbCrLf
myType = "Text"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 30
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> "" Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Number"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 20
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> 0 Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Duration"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If Left(ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)), 2) <> "0 " Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Cost"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> 0 Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Start"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> "NA" Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Finish"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> "NA" Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
MsgBox usedfields
End Sub
This is what the module gives me. But I would like to have beside Text 1 the name that is shown as below. e.g Text1 is "Test".
Would you mind helping me achieve this?
Thanks in advance.
Chuck

Where does Plan Version field store in SAP project system table?

Hi,
I would like to know where where does Plan Version field store in SAP project system table.
The plan version that I m refering is the Plan Version 1 in the menupath u201COn the Project Info System: Progress Analysis: Initial Screen, Choose Settings > Value display > Plan versionsu201D.
T-Code: CNE5
Thanks.

hi,
try table TKA09
regards

Is there an After Effects Plugin project template/skeleton for Qt Creator?

Is there an After Effects Plugin project template/skeleton for Qt Creator?
I mean, Qt is considered to be cross platform and it would be handy if you provided a sample plugin project since Adobe targets multiple platforms.
(I don't like Qt Creator either, but in order to make a cross-platform plugin I guess I have to go down this path...)

No, there is not. It's a good feature request, though:
http://adobe.ly/feature_request

Photoshop elements 13 depth of field guided effect

Why when I tried to use in the guided section of PSE 13 the depth of field simple effect, it did blurred the image, but after that the gradient action to clear one part of the image did not work, does anybody have an answer to that. thanks

Please note that the Depth of Field guided edit works only when done in the sequence as mentioned in the panel.
For example, if you use the focus tool *after* using the blur slider, it would result in darkening of the image and the black blobs. In such a case:
Reset the changes made in the depth of field by clicking "reset panel"
Click the button to "add blur"
mark the area in focus.
you can use the focus tool multiple times to preciously mark the area in your image with no blur.
To add the finishing touch, move the blur slider to add any extra blur required

Bad effect when draw object moving fast

Hi, i have a shooter game where a gun can shoot a bullet.
This bullet run fast so i move it whit X+=dx (dx is distance in pixel)
When the bullet run too fast i ahve a bad effect, ot smootly.
How i can resolve?
Now my code is frame based i think, i use this:
delay =30;
Timer timer=new Timer(delay, new ActionListener(){
          public void actionPerformed(ActionEvent e){
                    processBulletPosition();
                    timer.setDelay(delay-delayed);
public void processBulletPosition(){
         bullet.process(new 2DVector(10,0)); //2DVector is simple object contain dx and dy increment.
         repaint();
//im use JPanel to paint, not canvas
protected void paintComponent(Graphics g) {
          super.paintComponent(g);
          Graphics2D g2=(Graphics2D)g;
                nanoTime=System.nanoTime();
                bullet.draw(g2);
                delayed=(System.nanoTime()-nanoTime)*1E-6; //make delayed in millisec
}bullet proces is like this:
public void process(2DVector vect){
          int dx=vect.dx;
          int dy=vect.dy;
          x+=dx;
          y+=dy;
}Animation is very smooty, but when a bullet or an other object run too fast and dx increment is too many pixel the effect is very bad, and not smooty.
I think i have same fps becouse i decrement delay time of a delayed time...
Can you help me?
Message was edited by:
blow

One problem is that I'm not sure how accurate Timer is.
A standard approach in this sort of animation is to measure the time since the last redraw and move each component based on the time difference, rather than trying to keep the redraws an exact time apart and moving the components fixed distances.
The distance/time approach reduces the effect of pauses in your rendering code caused by outside influences such as the garbage collector and other game logic such as spawning controllers etc. It won't eliminate pauses but it makes them much less noticable.

Table for user status field in CJ20n transaction project defination

HI ALL,
what is table for user status field in CJ20n transaction project defination creation. This field is in Basic Data tab.
Thanks.

Hi,
Check following tables for Usre status:
TJ30 - User status
TJ30T - Texts for user status
TJ20 - Status profile
JEST - Object status
JSTO- WBS status profile.
Check this code:
REPORT zps_get_userstatus .
PARAMETERS: p_posid LIKE prps-posid.
*-- Constants
CONSTANTS: gc_yes(1)     TYPE c                 VALUE 'X',
           gc_no(1)      TYPE c                 VALUE ' '.
*-- Variables
DATA: l_objnr LIKE prps-objnr.
*-- Internal tables
DATA: BEGIN OF lit_jest OCCURS 0,
       objnr LIKE jest-objnr,
       stat LIKE jest-stat,
     END OF lit_jest.
DATA: BEGIN OF lit_jsto OCCURS 0,
       objnr LIKE jsto-objnr,
       stsma LIKE jsto-stsma,
      END OF lit_jsto.
DATA: BEGIN OF lit_status OCCURS 0,       "Combination of JEST & JSTO
          objnr LIKE jest-objnr,
          stsma LIKE jsto-stsma,
          stat LIKE jest-stat,
        END OF lit_status.
DATA: BEGIN OF lit_usrsta OCCURS 0,       "Uer status for all wbs
         objnr LIKE jest-objnr,
         stsma LIKE jsto-stsma,
         stat LIKE tj30t-estat,
         txt04 LIKE tj30t-txt04,
       END OF lit_usrsta.
DATA: BEGIN OF lit_usrtxt OCCURS 0,       "User Status text - TJ30T
        stsma LIKE tj30t-stsma,
        stat LIKE tj30t-estat,
        txt04 LIKE tj30t-txt04,
      END OF lit_usrtxt.
* get WBS object number
SELECT SINGLE
     objnr FROM prps
           INTO l_objnr
           WHERE posid = p_posid.
* get WBS active status from table JEST
SELECT
      objnr
      stat
           FROM jest INTO TABLE lit_jest
           WHERE objnr = l_objnr AND
                 inact <> gc_yes.
* get WBS status profile from table JSTO
SELECT
      objnr
      stsma FROM jsto
            INTO TABLE lit_jsto
            WHERE objnr = l_objnr.
* combine JEST and JSTO table for user status
LOOP AT lit_jest.
IF lit_jest-stat CP 'E++++'.
    READ TABLE lit_jsto WITH KEY
                        objnr = l_objnr.
    IF sy-subrc = 0.
      lit_status-objnr = lit_jest-objnr.
      lit_status-stsma = lit_jsto-stsma.
      lit_status-stat = lit_jest-stat.
      APPEND lit_status.
    ENDIF.
ENDIF.
CLEAR: lit_jsto, lit_status.
ENDLOOP.
* get text for user status
SELECT DISTINCT
         stsma
         estat
         txt04 FROM tj30t
               INTO TABLE lit_usrtxt
               FOR ALL ENTRIES IN lit_status
               WHERE stsma = lit_status-stsma AND
                     estat = lit_status-stat AND
                     spras = sy-langu.
Let me know if you have any question.
Regards,
RS

After effect cc project open with cs6.

i want open after effect cc project with cs6 version. could you help me?

See this:
opening After Effects projects from previous versions and saving back to previous versions

Multi line custom field badly saved to database

Hello community,
we're fighting currently against a strange issue.
All projects has some multi line custom fields to fill every week for project status.
During this exercise, some of the comments seems not well saved to database.
While coming back to the PDP, we are seeing a strange behavior :
Starting from that, I tried to look in the database and the saved html format is badly formatted, you can see a </div> in the middle and a missing one at the end of the sentence:
<div>Révision et approbation de l'ODS de Facilité.</div> <div> </div></div> <div>Compléter le questionnaire à soumettre aux experts.</div>
<div> </div> <div>Présentation et choix des experts.
As of now, we did not find any reason why this is happening.
While opening back the PDP in edition and saving back ,the problem is solved.
This is annoying because we are treating the html code as xml for reporting as seen here (http://aboutmsproject.com/converting-rtf-to-text-in-sql-revisited/
) and this is crashing because of badly formatted html code
any advices?
regards
Jérome

Hi Jerome,
I've seen this issue occur when text is pasted into the field from other applications, like Outlook and Word. I've not yet been able to determine how to get it to stop. The error then causes the invalid XML issue you are seeing. A former co-worker had successfully
integrated the use of jQuery into PDPs. I'm wondering if they have a HTML clean function.
Thanks for finding my post useful!
Treb Gatte, Project MVP, Tumble Road LLC |
@tgatte | http://AboutMSProject.com

Best way to export clips with effects, like project manager

First of all I would like to say hello to everybody, cause this is my first post, thanks in advance for your help.
The problem:
I'm running adobe premiere pro cs06 on a mac and what I want to do seems simple but is very difficult. I import material from an Alexa camera, putting all the clips to the timeline and add some effects to the clips, too.
Now I want to export all changed clips with the same codec, filename and timecode, just like I can do, when I use the project manager to consolidate my files.
So the goal is an easy way to add effects and export same as source?!
Again thank you very much
Cheers
Bird

Thank you for your answers so far,
First I dont want to export to the arriraw format, what I want to export to is prores444. The reason why is simply because there are some effekts that might speed up my workflow, let me explain:
Most jobs I do the following, I work as a DIT and colorcorrect footage from lots of cameras on set and export them to any kind of codec using davinci resolve.
The most time consuming progess is the neutralizing of all the different camera models..
With plugins like re:match from re:vision it could save me some time, due to its good auto correction, which would give me a good starting point for my further colorcorrection.
But in order to be faster than my normal way, I need to have some auto or same as source export funktion. Although when the clips match the original metadata I will have no problems in the later stages of my workflow.

After Effects CS4 project issues from English to French

Hi All,
So to give a quick summary of what our issue is, when a french AE designer (Using French AE) opened the project we had created in the UK (on English AE) he was getting errors mentioning that the xyz position preset was unavailable. After spending a lot of time on the support line to Adobe they told me that the issue is basically that the x, y, z position preset which is part of the animation we created apparently DOES NOT translate across from English language After Effects over to French language After Effects (not entirely sure why, might be that this is code based and that the French code and English codes aren't the same). Adobes only suggestion was for the french people to download a trial of the English language version of After Effects CS5 and make the amends and export using that.
Now being a stubborn so and so, I wondered what might be the cause, I'm guessing that the expression code is language specific, which led me to wonder whther it could literally be translated? So in english the expression is:
value + [effect("Separate XYZ Position")("X Position"), effect("Separate XYZ Position")("Y Position"), effect("Separate XYZ Position")("Z Position")]
Does anyone have French AE installed that could give us a clue to what the equivelent french expressions would be?
Many thanks
Mike

You should not need to take care of anything else. The internal references, functions and variable names are always English. Only the UI-centric stuff will change, that is the effect name and its control parameter, i.e. ("Slider") will become ("Curseur") in French. You could also avoid this by simply using the control index value instead of the control parameter, so ("Slider") would simply be (1), as it's the only control element. now that I think of it, just yesterday I saw an internationalizer script at AEScripts com that might be of use to you, too. If you have something odd, simply post the code and I'll have a look (or our resident Frenchmen here on this forum, Sébastien Perrier) .
Mylenium

Why can't I open my saved After Effects CS6 project?

When I try to open my project in CS6, it says "File is damaged" and "After Effects warning: Unable to read color settings. Color settings reset to factory default." I NEED HELP!

We need to know a lot more to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"
Also, if you're typing in all caps that you need help, then perhaps you should be contacting Adobe Technical Support, where you're guaranteed to get a response, rather than posting to a forum where people help out in their free time.

After Effects CS6 - Project Files Virused?

Guys,
I'm collaborating on a stereo TV show with several other CG artists (living around the U.S.), and one of them has been complaining for months now about how his AE project files (created with CS6, running under Windows 8 64-bit) have gotten huge, and take literally hours to load. He then shipped us the files for us to examine.
Here's the deal: one of his .AEP files clocks in at 222 megs, and when I loaded it into my copy of CS6 (running on a dual Xeon machine, Windows 7 64-bit, 32G of RAM), it took 45 minutes to load. (Another one of our artists, working on a Power Mac, tried loading a different project created by this guy, and it took 10 hours to load.)
I then proceeded to completely rebuild his comp in my copy of AE CC -- I loaded all his original footage (a combination of 32-bit .EXRs, .PNGs, .TIFs and .TGAs), set up the layers and effects filters exactly like his, and then resaved my file.
Result: my file is 2 megs in size -- 1/100th the size of his file -- and it loads on my machine in 5 seconds.
Has anyone ever heard of something like this? I'm wondering if somehow a virus or Trojan put an enormous amount of spurious data in these files, or if they were somehow created with a cracked version of AE or some other plugin, and our legit copies of AE are brought to a standstill with his bad .AEP files. (Note: I scanned his files and footage with Avast Antivirus, MalwareBytes and the Windows Malicious Software Removal tool, and came up with nothing.)
Here's the other weird thing: I loaded one of his project files, then started deleting layers, footage, and comps, and kept resaving the project and checking the file size. Even after I deleted every single element in the project -- it was completely empty -- and saved it, the file size went down from 222 megs to only 214 (and that empty project file still took 45 minutes to load.) I saved this empty project as an .XML (.aepx) file, and that file is 430 megs!
What in the world is going on here? We really need to figure this out, because it's destroyed our productivity on this show having to rebuild these comps. Thanks,

Guys, all the footage is CG and was rendered from Lightwave -- there was no live-action footage to "camera track" or "stabilize."
Second, most of these comps don't even use a camera inside of AE -- they're 2D comps entirely.
And again, as an experiment, I deleted literally everything in the comp and saved a completely empty project, and the file was still huge and took 45 minutes to load. How can that be?
I would really love to send one of these files to Adobe and have you guys load it into a debug version of AE CS6 to see if you can identify what the problem is. Thanks,

Lot of z fields bad effect to project-remedy

Similar Messages

Maybe you are looking for