Lot's of questions...Looking for some answers

I was wondering if anybody knows if this is do-able,
or even worth trying to do.
I have been producing local dance show DVD's for the past couple of years...
Not in HD, but I do shoot with multiple high end 3-chip cameras,
and the finished DVD's do have indexed menus for easy selections.
Here's my question:
I need to upgrade to HD equipment but I can't do it all at once.
I'm thinking about purchasing a camera that shoots in AVCHD and was wondering how much of a headache it may become to edit combined with my present cameras.
I'd like to intermix my SD footage with the new AVCHD foootage (converted to Pro-res),
can this be done and multi-camera edited?
Also,
would I be able to set the HD camera as my wide shot,
and then zoom in & keyframe my motion of this shot to follow the action in post?
My thinking was that I could probably zoom in to about 130% and still have better
quality than my SD cameras. (Also, my pans & zooms would be flawless)
I have a G5 Quad (Power PC) running OS X 10.4.11
and a Macbook-Pro (Intel) running OS X 10.5.8.
Both systems are presently using FCP-6.0.4.
So here are my questions:
Is it possible?
Is it worth it?
And is AVCHD a good choice to upgrade to?
Thanks for any & all advise/opinions,
Todd

The HMC40, or even something consumerish like the Canon Vixia, will shoot great looking stuff as long as it's not too low-light. AVCHD is automatically transcoded to ProRes upon Log and Transfer, so you shouldn't have to worry about that... though you'll save some HD space and increase your multicam streams if you upgrade to FCP7 and use ProRes (LT) instead.
If your final output is SD DVD, then you can indeed zoom up on the HD footage a bit and do some simple keyframing.
Multicam may require you to transcode your SD footage to the same codec (in this case ProRes), perhaps someone can confirm that.
Too bad Apple sees fit to insist upon transcoding H.264 to ProRes, when Adobe and Avid have proven it's not necessary... (cough)

Similar Messages

Oracle 11g ASM - looking for some answers

Hello,
I reviewed a bunch of stuff about Oracle 11g ASM from various sources, but still haven't figured out some answers. Perhaps someone could help me to find the missing links please.
Q1) ASMLib seems to require partitions. ASM recognizes partitions as well as disk devices. So why not using partitions in general? At least I could use ASMLib later without having to reconfigure the drives and loosing all data. Correct?
Q2) The ASMLib driver is not installed by default, and unlike other ASM components is not available from the public yum repository for OEL 5.5. After some searching I found it available for download, but why is it not more obvious. Should it not be used anymore? http://www.oracle.com/technetwork/topics/linux/downloads/rhel5-084877.html
Q3) ASM will not see drives or partitions unless the device ownership is set to Oracle. When Enterprise Linux starts, it resets all block devices to the owner of root. The solution is to create a udev rules file: e.g.:
/etc/udev/rules.d/99-oracle.rules:
KERNEL=="sda", OWNER="oracle", GROUP="dba", MODE="0660"
KERNEL=="sdb", OWNER="oracle", GROUP="dba", MODE="0660"
Before using ASMLlib, I need to configure the driver, which will ask me for the default user and group who owns the partitions (/etc/init.d/oracleasm configure)
I conclude that using ASMLib will therefore not require a udev rules file, correct?
Q4) The Oracle documentation outlines that ASMLIB is an application programming interface (API) developed by Oracle to simplify the operating system–to-database interface and to exploit the capabilities of vendors' storage arrays on Linux-based systems. What does this mean, examples? Isn't this what ASM does in general, why ASMLIB?
Q5) I installed ASM and would like to re-configure it. Apparently ASM alone does not provide an interface other than sqlplus. In order use ASM with Enterprise Manager, I need to install a database or EM 11g (?) Grid control. Correct?
Thanks,
Markus

Hi,
So you got answers for 3 4 and 5
Q1) ASMLib seems to require partitions. ASM recognizes partitions as well as disk devices. So why not using partitions in general? At least I could use ASMLib later >without having to reconfigure the drives and loosing all data. Correct?Using ASMLib, you can use your understandable disk partitions names rather than creating raw devices and adding entry in /etc/raw file and changing rights on every startup, so it makes life easier. Read post of "wcoekaer" from following thread
ASMLib and Linux block devices
Q2) The ASMLib driver is not installed by default, and unlike other ASM components is not available from the public yum repository for OEL 5.5. After some >searching I found it available for download, but why is it not more obvious. Should it not be used anymore? http://www.oracle.com/technetwork/topics/linux/downloads/rhel5-084877.html
I am not sure about OEL 5, but i have seen it in OEL 4 and i can install this package during OEL 4 installation. But i believe you should be able to find this package in one of the Disks of OEL 5
Salman

I've forgotten the answers to my security questions, and for some reasons My rescue email is not active now, I can only access to my primary email, I have just redeemed a $25 gift card this morning, I was unable to use the money now. what should I do?

I've forgotten the answers to my security questions, and for some reasons My rescue email is not active now, I can only access to my primary email, I have just redeemed a $25 gift card this morning, I was unable to use the money now. what should I do?

You need to ask Apple to reset your security questions; this can be done by clicking here and picking a method, or if your country isn't listed, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(110676)

I'm looking for some inspiration here on how best to set up my TC

Copied from a post else where, any help greatly appreciated!!
I'm looking for some inspiration here on how best to set up my TC for my needs & wondering how others do for similar needs....
I have a 2TB TC that I have set up so that all of mine & my girlfriends photo's, music, movies & documents are on the one location so that we can access it wirelessly from both our MacBooks & also from a MacMini which I'm going to buy in a month or 2. Changing the location for where iTunes & iPhoto look wasn't a problem but browsing through iPhoto in particular is really slow due to the number of previews I presume, and also we are now unable to have any of the media with us when traveling about, synching phones on the move is a disaster as well!
Anyway,
is there an easy way of setting up iTunes / iPhoto so that we can have all the data on the TC managed on the MacMini but import small iTunes Playlists & iPhoto Albums to our MacBooks without having to change in preferences where the applications look for data each time we get home?
Any help anybody can offer would be grand!
Thanks in advance.........

You topic might be better suited for the iPhoto or iTunes forums, since your question seems to be with the application(s) functionality, not really the Time Capsules. However, if you start iPhoto or iTunes while holding down on the "option/alt" key, you can manually select a library to access. When you want one of your computers to access the library on the Time Capsule, make sure it's mounted as a shared volume on your Desktop and then open iTunes and point it towards the library on the Time Capsule. If you want to use a smaller library on your computer, open iTunes and point it to the library on your Mac. I've never switched back and forth multiple times between multiple libraries, so you might check in the iPhoto or iTunes forums to see if any issues may arise from doing this repeatedly.
-Doug

Looking for some VPN advice on c7200 and possible serious problem

Hi all,
I am looking for some advice on how to figure out few things.
customer has a c7200 with VPN module and seen the following
15.2(4)M4, RELEASE SOFTWARE (fc2)
Vpn7# Show crypto isakmp sa
Exemple: x.x.x.x y.y.y.y QM_IDLE 14020 ACTIVE ( repeated around 700 times)
Vpn7# IKE-Session : 2517 active, 5120 max, 3169 failed
Hardware Encryption : ACTIVE
Number of hardware crypto engines = 1
CryptoEngine VAM2+:7 details: state = Active
Capability : IPPCP, DES, 3DES, AES, RSA, IPv6, FAILCLOSE, HA
IKE-Session : 2800 active, 5120 max, 3169 failed
DH : 55 active, 5120 max, 0 failed
IPSec-Session : 1628 active, 10230 max, 0 failedhe would like to know whether these messages allude to some kind of serious problem or show the normal operation of vpn routers. because they need to analyse their business related incidents and do prevent actions
therefore if someone could give give me some advice if there is any problem with the hardware i would greatly appreciate it
thanks in advance
Lance

I'd make sure to read the contract and any associated fine print really, really carefully before doing this. But back to your question - this is more of a marketing question and I'd suggest hiring a good marketer (or become one) to make the most of this opportunity.
And how do you find a good marketer?
I'd suggest using Seth Godin (http://sethgodin.typepad.com/) as your guide/model. If the person you want to hire knows and follows Seth's good marketing advice, you'll likely do very well. If they don't know who Seth Godin is and are obsessed with SEO rankings and email blasts, I'd be very worried (that's not to say SEO rankings and email blasts are "wrong" but that they shouldn't be the only options in your marketing approach).
Good luck!

Looking for some good Arc and Circle drawing pdf code.

Hi I am looking for some suggestions on how to draw circles and arcs using PDF. My arcs have recently started to be drawn as chords in Adobe Reader 9.1.1. I am looking for example code o this nature (I know this is not circle or arc code this is just an example):
b
0 0 0 RG 0 0 0 rg
1 w 98 -156 m 104 -154 l 104 -158 l 0 0 0 RG 0 0 0 rg
b
0 0 0 RG 0 0 0 rg
1 w 398 -156 m 392 -154 l 392 -158 l 0 0 0 RG 0 0 0 rg
b
0 0 0 RG 0 0 0 rg
1 w 98 -156 m 396 -156 l S
BT /F1 10 Tf 243 -151 Td (1.5") Tj ET
1 w 398 -196 m 392 -194 l 392 -198 l 0 0 0 RG 0 0 0 rg
b
i.e. actual PDF tokens.
If you know of a website that feature such examples I would appreciate the URL too.
Thanks

Jem,
Pardon me if I sound rude by suggesting that before you launch into an expensive printing job (which could result in disastrous consequences if you don't do it right) that you actually learn how to use the program first. You may also want to learn something about the offset printing process and how to prepare print jobs.
Even many Illustrator novices know that there is no such thing as a background in Illustrator, in the sense that there is in Photoshop. You will need to PLACE your Photoshop background as a high resolution CMYK tiff in the provided template. That's the answer to your second question. I don't really understand your first question. Maybe someone else will. Are you simply asking, "where do I begin?" If so, then you REALLY REALLY need to read a book on how to use Illustrator. The Adobe Illustrator Classroom in a Book might be the place to start.
"I'm pretty good with CPR. I'm helping a friend do his vasectomy and I already have all the equipment (scalpels, thread, etc.) I'm just having trouble figuring out where to cut."

Looking for some one who can help me in SUN IDM

Hi Friends,
I am looking for some one who can help me to learn sun IDM. Off couse I will pay for your time.
I can be reached at [email protected]
Please let me know if you have some time
Thx

Hi Zebra,
I really appreciate your reply. I would like to discuss out of this forum so that no one here annoyed with our newbie questions. Please send me email as I listed earlier to discuss best ways. I send email to Andy to join us.

Looking for some RAID storage ideas...can anyone help?

Hi, I'm looking for some recommendations out there. I'm going to be getting a new PowerMac tower with a cinema display and will also be looking to get some RAID-type storage for it so that I can do lots of video editing and photo storage.
Ideally, I'd like to get a rack-type storage with swappable drives much like the XServe RAID but I don't need it to have server capabilities like the XServe does, i.e. I'm not going online with anything. This is purely going to be working as an external storage tower that two adjeacent computers will be directly firewired to.
Obviously, the XServe would fit this, but like I said, I don't need the computer/server capability and also would not want to spend $6000 just for a single TB of storage that the XServe has. I'm thinking more along the lines of a swappable drive rack system like the old Avid systems used to have 10 years ago. Does anyone know if Apple makes such a thing? Or if any third party companies do?
Thanks.

If you are using typical DV cameras you don't need striped RAID to capture the video or edit it either. And striped means you lose one drive you lose two drives worth of data.
The LaCie Bigger and Biggest disks may be suitable solutions, they are hardware RAIDed internally and come in 1 and 1.5TB models, using FW 800 they are plenty fast for video.

HI everyone. Im looking for some help. Im getting the Itunes error 50 and No network connection error. I have a perfect connection. My iphone will download and my ipad but nothing from my computer. any help would be great.

HI everyone. Im looking for some help. Im getting the Itunes error 50 and No network connection error. I have a perfect connection. My iphod will not download and my ipad any help would be great.

A lot of people are experiencing it, which suggests that Apple is having issues. If that is the case all people can do is wait it out.

Looking for some assistancte in GUI_DOWNLOAD

Hi there,
See I have this exercise I have to do here. Basically I have to create a program that will download the contects of SBOOK to my pc. I have to use GUI_DOWNLOAD in this exercise. Also, the user will have to input the path and file name of the file to be downloaded to. I have place appropriate error message on the screen as well but I'm not sure how to do this.Being relatively new to this, I tried looking for some samples and this is what I came up so far.
REPORT ZISTANZS_TRNG_EX9C.
TABLES: SBOOK.
PARAMETERS: FILEINP(30) DEFAULT 'c:\TEMP\wee.txt' OBLIGATORY.
DATA: BEGIN OF ITAB OCCURS 100.
      INCLUDE STRUCTURE SBOOK.
DATA: END OF ITAB.
CALL FUNCTION 'GUI_DOWNLOAD'
     EXPORTING
         FILENAME            = FILEINP
         FILETYPE            = 'ASC'
         write_field_separator = 'X'
     TABLES
         DATA_TAB            = ITAB
     EXCEPTIONS
         FILE_OPEN_ERROR     = 1
         FILE_WRITE_ERROR    = 2
         OTHERS              = 3.
Unfortunately, it doesn't work though. It keeps saying that my FILENAME is not the same data type as FILEINP? I'm asking for some assistance in how this can be properly solved? Any help would be appreciated /

Hi,
Please refer the code below:
* File download, uses older techniques but achieves a perfectly
* acceptable solution which also allows the user to append data to
* an existing file.
PARAMETERS: p_file like rlgrap-filename.
* Internal table to store export data
DATA: begin of it_excelfile occurs 0,
   row(500) type c,
   end of it_excelfile.
DATA: rc TYPE sy-ucomm,
        ld_answer TYPE c.
CALL FUNCTION 'WS_QUERY'
       EXPORTING
            query    = 'FE' "File Exist?
            filename = p_file
       IMPORTING
            return   = rc.
IF rc NE 0.                       "If File alread exists
    CALL FUNCTION 'POPUP_TO_CONFIRM'
      EXPORTING
*          TITLEBAR              = ' '
*          DIAGNOSE_OBJECT       = ' '
           text_question         = 'File Already exists!!'
           text_button_1         = 'Replace'
*          ICON_BUTTON_1         = ' '
           text_button_2         = 'New name'
*          ICON_BUTTON_2         = ' '
*          DEFAULT_BUTTON        = '1'
*          DISPLAY_CANCEL_BUTTON = 'X'
*          USERDEFINED_F1_HELP   = ' '
*          START_COLUMN          = 25
*          START_ROW             = 6
*          POPUP_TYPE            =
      IMPORTING
           answer                = ld_answer
*     TABLES
*         PARAMETER              =
      EXCEPTIONS
          text_not_found         = 1
          OTHERS                 = 2.
* Option 1: Overwrite
    IF ld_answer EQ '1'.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
*            BIN_FILESIZE            =
             filename                = p_file        "File Name
             filetype                = 'ASC'
*       IMPORTING
*            FILELENGTH              =
        TABLES
            data_tab                = it_excelfile   "Data table
        EXCEPTIONS
            file_write_error        = 1
            no_batch                = 2
            gui_refuse_filetransfer = 3
            invalid_type            = 4
            OTHERS                  = 5.
      IF sy-subrc <> 0.
        MESSAGE i003(zp) WITH
                 'There was an error during Excel file creation'(200).
        exit. "Causes short dump if removed and excel document was open
      ENDIF.
* Option 2: New name.
    ELSEIF ld_answer EQ '2'.
      CALL FUNCTION 'DOWNLOAD'
        EXPORTING
             filename            = p_file          "File name
             filetype            = 'ASC'           "File type
*             col_select          = 'X'            "COL_SELECT
*             col_selectmask      = 'XXXXXXXXXXXXXXXXXXXXXXXXXX'
*                                                   "COL_SELECTMASK
             filetype_no_show    = 'X'     "Show file type selection?
*       IMPORTING
*             act_filename        = filename_dat
        TABLES
             data_tab            = it_excelfile    "Data table
*            fieldnames          =
        EXCEPTIONS
             file_open_error     = 01
             file_write_error    = 02
             invalid_filesize    = 03
             invalid_table_width = 04
             invalid_type        = 05
             no_batch            = 06
             unknown_error       = 07.
    ENDIF.
ELSE.                               "File does not alread exist.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
*          BIN_FILESIZE            =
           filename                = p_file         "File name
           filetype                = 'ASC'          "File type
*     IMPORTING
*          FILELENGTH              =
      TABLES
           data_tab                = it_excelfile   "Data table
      EXCEPTIONS
           file_write_error        = 1
           no_batch                = 2
           gui_refuse_filetransfer = 3
           invalid_type            = 4
           OTHERS                  = 5.
    IF sy-subrc <> 0.
      MESSAGE i003(zp) WITH
               'There was an error during Excel file creation'(200).
      exit. "Causes short dump if removed and excel document was open
    ENDIF.
ENDIF.
Thanks,
Sriram Ponna.

Looking for some assurances that I haven't made a mistake switching to Mac.

Bought an intel-powered IMac 9 days ago and love everything about it's look, functionality, etc.. Only problem: I've had a bout of "Application has closed unexpectedly" occcurrances while using Safari (while at AOL.com deleting emails from aol account) and while editing pics in iPhoto. As this happened time and again, I got a sad, sinking feeling that I'm headed for the same frustrations that I've had w/ every Windows machine I've ever owned. Ugh!..I switched to Apple for the specific purpose of avoiding crashes!!! Apple support walked me through steps to fix (removed/updated Quicktime, and check a few other things..). They were very helpful, but... I absolutely detest having to do this. Other than Office:Mac, i've added nothing to this machine! I'm really stressed about this. I paid far more for this than I would have for a Windows machine simply because I had heard that Apple machines don't do this sort of thing!!
Please tell me that this is normal and expected with a new machine and not a harbinger of more complicated problems to come!! I'm hoping that once resolved, I won't much more of this.. On the other hand, if many of you feel that this issue is a bad omen, I'll take the machine back while I still can. ..What a pity though, it's truly been a joy to use so far.
IMAC (early 2006) Mac OS X (10.4.4)

Hi syd123! And Welcome to Discussions!
No you haven't made a mistake! You will love your Mac!
Deleting AOL Mail, crashes Safari (Consolidation)
It seems the most recent Safari, and or 10.4.4, update has created this problem.
Apple & AOL are both aware of this, but, as far as I know, no correction has been implemented.
Here are some of the work arounds, that I have been able to discern from the various posts regarding this issue.
Use the FIREFOX BROWSER.
Use your AOL Mail program.
Use this utility AOL SERVICES ASSISTANT, to set up Apple Mail, to access AOL Mail.
Access the AOL Mail thru Classic AOL Webmail.
And here are links, to the various threads, discussing this issue.
<a href="http://discussions.apple.com/thread.jspa?threadID=314479&start=0&tstart=0 "Safari and AOL</a>
AOL/ Delete/ Safari crash
safari crashing with aol.com mail deletion
AOL Webmail and Safari on 10.4.2 crashes on delete mail
Update 10.4.4 causes crash
Safari crashes when deleting email on AOL
Safari Update
Safari Crashes AOL mail
Safari Crashes when Deleting or Reporting E-Mail as SPAM on AOL Web Mail
Looking for some assurances that I haven't made a mistake switching to Mac. This Thread
Good Luck!
ali b

I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get the

I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get these things working. I know that I have to identify my camera through the DHCP table and set up port forwarding and there is the problem.
My network consists of 4 base stations set up in a roaming network - same network name and passwords. I need to do it this way so I don't have to switch network when I move from one side of the house to the other, go to the cabana, or my shop in the barn. The network works pretty well since I went to a roaming set up. Good performance, yata, yata, yata.
However, the roaming network requires the AEBS's to be set up in bridge mode, rather than sharing an ip address. When the AEBS is set to bridge mode, you don't see a DCHP table or have the ability to identify your IP Cam through the AEBS - and hence, no port forwarding.
I am able to identify and set up my Linksys IP Cam by locating the ip address on my FIOS router, even though, it's plugged into an AEBS. I set it up, see the video, remove the ethernet cable from the IP Cam, restart - and I can't get to it from an AEBS. In researching this, it appears, I should be setting up the AEBS to "share an IP Address", going to the DHCP table and identifying the camera's IP address and setting up port forwarding. However, you don't see any of the DHCP or port forwarding options in Airport Network Utility when configuring in bridge mode.
I'm hoping I'm missing something here and that the solution isn't to set it up at the FIOS router level, but I'm beginning to think that's my only hope. What concerns me there is that I should be able to see the IP cam on the network without port forwarding since I'm not coming from outside, and I can't even do this unless it's connected hard wire.
I'd appreciate any insight into this that anyone might have. I've hit the wall with what I know.
Thanks.

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

Looking for some advice dealing with Kernel Panics

Hi there! I'm looking for some help regarding constant kernel panics I've been getting on my machine. It has been happening pretty regularly for the last month or so, occuring sometimes three times in one day and other times none. I've been looking to see what might cause the issue and have thus far come up emptyhanded. I can't think of anything I've modified recently that would be causing the issue. I performed a hardware test using AHT and no errors were found. I've included both the most recent report from the panic as well as the EtreCheck report. Any and all advice is appreciated!
Thanks in advance!
Anonymous UUID:       D680EEB6-4BD2-B93C-318E-D6D262CA3B53
Mon Apr 28 17:28:08 2014
panic(cpu 0 caller 0xffffff7f875b6fb0): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff811c014000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.35/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff80f57cb140 : 0xffffff8005222fa9
0xffffff80f57cb1c0 : 0xffffff7f875b6fb0
0xffffff80f57cb290 : 0xffffff7f85c94eab
0xffffff80f57cb350 : 0xffffff7f85d5e49a
0xffffff80f57cb390 : 0xffffff7f85d5e50a
0xffffff80f57cb400 : 0xffffff7f85fdd056
0xffffff80f57cb530 : 0xffffff7f85d81b39
0xffffff80f57cb550 : 0xffffff7f85c9b8fd
0xffffff80f57cb600 : 0xffffff7f85c99408
0xffffff80f57cb800 : 0xffffff7f85c9a386
0xffffff80f57cb8e0 : 0xffffff7f86c0c9c2
0xffffff80f57cb920 : 0xffffff7f86c1c37f
0xffffff80f57cb940 : 0xffffff7f86c4a33b
0xffffff80f57cb980 : 0xffffff7f86c4a39b
0xffffff80f57cb9c0 : 0xffffff7f86c21e15
0xffffff80f57cba10 : 0xffffff7f86bedb5e
0xffffff80f57cbaa0 : 0xffffff7f86be9ae7
0xffffff80f57cbad0 : 0xffffff7f86be7636
0xffffff80f57cbb00 : 0xffffff80056cbe03
0xffffff80f57cbb90 : 0xffffff80056cdcff
0xffffff80f57cbbf0 : 0xffffff80056cb81f
0xffffff80f57cbd40 : 0xffffff80052b6558
0xffffff80f57cbe50 : 0xffffff8005226bf1
0xffffff80f57cbe80 : 0xffffff80052139f5
0xffffff80f57cbef0 : 0xffffff800521e043
0xffffff80f57cbf70 : 0xffffff80052c976d
0xffffff80f57cbfb0 : 0xffffff80052f3b46
      Kernel Extensions in backtrace:
         com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[80472F2E-D31D-32C4-88BA-2EB3D63 C159F]@0xffffff7f85c45000->0xffffff7f85eadfff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f858bb000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[999E29DA-D513-3544-89D1-9885B728A098]@0xff ffff7f85c35000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f85b28000
         com.apple.nvidia.classic.NVDANV50HalTesla(8.2.4)[B0E6AAA7-E970-3D81-8B43-145D56 A3A4AC]@0xffffff7f85eb8000->0xffffff7f86161fff
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[80472F2E-D31D-32C4-88BA-2EB3D63 C159F]@0xffffff7f85c45000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f858bb000
         com.apple.driver.AppleMuxControl(3.4.35)[1BFF66C1-65E4-3BB3-9DEE-B61C3137019B]@ 0xffffff7f875a9000->0xffffff7f875bbfff
            dependency: com.apple.driver.AppleGraphicsControl(3.4.35)[09897896-ACBD-36B5-B1D4-0CCC4000E 3B3]@0xffffff7f875a1000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f85bdd000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f858bb000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f85b28000
            dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[E04639C5-D734-3AB3-A682-FE66694C66 53]@0xffffff7f875a4000
         com.apple.GeForceTesla(8.2.4)[B6C71E9A-E304-354B-80AD-C69C9032D367]@0xffffff7f8 6bcc000->0xffffff7f86c96fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f858bb000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[999E29DA-D513-3544-89D1-9885B728A098]@0xff ffff7f85c35000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f85b28000
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[80472F2E-D31D-32C4-88BA-2EB3D63 C159F]@0xffffff7f85c45000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
13C64
Kernel version:
Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
Kernel slide:     0x0000000005000000
Kernel text base: 0xffffff8005200000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 31531656545358
last loaded kext at 27797939824574: com.apple.driver.AppleUSBCDC          4.2.1b5 (addr 0xffffff7f876b9000, size 20480)
last unloaded kext at 27858255752654: com.apple.driver.AppleUSBCDC          4.2.1b5 (addr 0xffffff7f876b9000, size 16384)
loaded kexts:
com.splashtop.driver.SRXFrameBufferConnector          1.5
com.avatron.AVExFramebuffer          1.7
com.splashtop.driver.SRXDisplayCard          1.5
com.Cycling74.driver.Soundflower          1.5.2
com.avatron.AVExVideo          1.7
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.iokit.IOBluetoothSerialManager          4.2.3f10
com.apple.driver.AGPM          100.14.15
com.apple.driver.AudioAUUC          1.60
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleHWAccess          1
com.apple.driver.AppleMikeyHIDDriver          124
com.apple.driver.AppleMikeyDriver          2.6.0f1
com.apple.driver.AppleHDA          2.6.0f1
com.apple.driver.AppleIntelHDGraphics          8.2.4
com.apple.driver.AppleIntelHDGraphicsFB          8.2.4
com.apple.GeForceTesla          8.2.4
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.3f10
com.apple.driver.AppleLPC          1.7.0
com.apple.driver.AppleSMCLMU          2.0.4d1
com.apple.driver.AppleMuxControl          3.4.35
com.apple.driver.AppleUpstreamUserClient          3.5.13
com.apple.driver.AppleMCCSControl          1.1.12
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.SMCMotionSensor          3.0.4d1
com.apple.driver.AppleUSBTCButtons          240.2
com.apple.driver.AppleUSBTCKeyboard          240.2
com.apple.driver.AppleIRController          325.7
com.apple.driver.AppleUSBCardReader          3.4.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          35
com.apple.iokit.SCSITaskUserClient          3.6.6
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.5.1
com.apple.driver.AirPort.Brcm4331          700.20.22
com.apple.driver.AppleFWOHCI          4.9.9
com.apple.driver.AppleUSBHub          666.4.0
com.apple.driver.AppleAHCIPort          3.0.0
com.apple.iokit.AppleBCM5701Ethernet          3.8.1b2
com.apple.driver.AppleUSBEHCI          660.4.0
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleACPIButtons          2.0
com.apple.driver.AppleRTC          2.0
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          2.1
com.apple.driver.AppleACPIEC          2.0
com.apple.driver.AppleAPIC          1.7
com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
com.apple.nke.applicationfirewall          153
com.apple.security.quarantine          3
com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.7
com.apple.AppleGraphicsDeviceControl          3.4.35
com.apple.iokit.IOSurface          91
com.apple.iokit.IOBluetoothFamily          4.2.3f10
com.apple.driver.DspFuncLib          2.6.0f1
com.apple.vecLib.kext          1.0.0
com.apple.iokit.IOAudioFamily          1.9.5fc2
com.apple.kext.OSvKernDSPLib          1.14
com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.3f10
com.apple.driver.AppleSMBusPCI          1.0.12d1
com.apple.iokit.IOFireWireIP          2.2.6
com.apple.driver.AppleHDAController          2.6.0f1
com.apple.iokit.IOHDAFamily          2.6.0f1
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleGraphicsControl          3.4.35
com.apple.nvidia.classic.NVDANV50HalTesla          8.2.4
com.apple.driver.AppleSMBusController          1.0.11d1
com.apple.nvidia.classic.NVDAResmanTesla          8.2.4
com.apple.iokit.IONDRVSupport          2.4.1
com.apple.iokit.IOGraphicsFamily          2.4.1
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.7.0d10
com.apple.driver.AppleSMC          3.1.8
com.apple.driver.AppleUSBMultitouch          240.9
com.apple.iokit.IOUSBHIDDriver          660.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice          3.6.6
com.apple.iokit.IOUSBMassStorageClass          3.6.0
com.apple.driver.CoreStorage          380
com.apple.driver.AppleUSBMergeNub          650.4.0
com.apple.driver.AppleUSBComposite          656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.6
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.6
com.apple.iokit.IO80211Family          630.35
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOAHCIFamily          2.6.5
com.apple.iokit.IOUSBUserClient          660.4.2
com.apple.iokit.IOEthernetAVBController          1.0.3b4
com.apple.driver.mDNSOffloadUserClient          1.0.1b5
com.apple.iokit.IONetworkingFamily          3.2
com.apple.iokit.IOUSBFamily          675.4.0
com.apple.driver.AppleEFINVRAM          2.0
com.apple.driver.AppleEFIRuntime          2.0
com.apple.iokit.IOHIDFamily          2.0.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          278.11
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.AppleKeyStore          2
com.apple.driver.DiskImages          371.1
com.apple.iokit.IOStorageFamily          1.9
com.apple.iokit.IOReportFamily          23
com.apple.driver.AppleFDEKeyStore          28.30
com.apple.driver.AppleACPIPlatform          2.0
com.apple.iokit.IOPCIFamily          2.9
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
com.apple.kec.pthread          1
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463531323634485A2D3147314431
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463531323634485A2D3147314431
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.3f10 13477, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS725050A9A362, 500.11 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: Hub
USB Device: iPhone
USB Device: Built-in iSight
USB Device: IR Receiver
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Internal Memory Card Reader
Thunderbolt Bus:
EtreCheck:
Hardware Information:
          MacBook Pro (15-inch, Mid 2010)
          MacBook Pro - model: MacBookPro6,2
          1 2.66 GHz Intel Core i7 CPU: 2 cores
          8 GB RAM
Video Information:
          Intel HD Graphics - VRAM: 288 MB
          NVIDIA GeForce GT 330M - VRAM: 512 MB
System Software:
          OS X 10.9.2 (13C64) - Uptime: 0 days 0:8:28
Disk Information:
          Hitachi HTS725050A9A362 disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    disk0s2 (disk0s2) <not mounted>: 499.25 GB
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-898
USB Information:
          Apple Inc. iPhone
          Apple Inc. Built-in iSight
          Apple Computer, Inc. IR Receiver
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Internal Memory Card Reader
Thunderbolt Information:
Configuration files:
          /etc/hosts - Count: 7
Gatekeeper:
          Mac App Store and identified developers
Kernel Extensions:
          [kext loaded] com.Cycling74.driver.Soundflower (1.5.2) Support
          [kext loaded] com.avatron.AVExFramebuffer (1.7 - SDK 10.8) Support
          [kext loaded] com.avatron.AVExVideo (1.7 - SDK 10.8) Support
          [kext loaded] com.splashtop.driver.SRXDisplayCard (1.5 - SDK 10.8) Support
          [kext loaded] com.splashtop.driver.SRXFrameBufferConnector (1.5 - SDK 10.8) Support
          [not loaded] foo.tap (1.0) Support
          [not loaded] foo.tun (1.0) Support
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist Support
          [loaded] com.adobe.SwitchBoard.plist Support
          [loaded] com.barebones.authd.plist Support
          [loaded] com.barebones.textwrangler.plist Support
          [loaded] com.bitcasa.BitcasaUpdateCheck.plist Support
          [running] com.cleverfiles.cfbackd.plist Support
          [loaded] com.google.keystone.daemon.plist Support
          [loaded] com.microsoft.office.licensing.helper.plist Support
          [loaded] com.oracle.java.Helper-Tool.plist Support
          [loaded] com.oracle.java.JavaUpdateHelper.plist Support
          [loaded] com.realvnc.vncserver.plist Support
          [failed] com.splashtop.streamer.SRServiceDaemon.plist Support
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist Support
          [loaded] com.adobe.CS5ServiceManager.plist Support
          [running] com.amazon.sendtokindle.launcher.plist Support
          [failed] com.bitcasa.BitcasaUI.plist Support
          [loaded] com.google.keystone.agent.plist Support
          [loaded] com.oracle.java.Java-Updater.plist Support
          [loaded] com.realvnc.vncserver.peruser.plist Support
          [not loaded] com.realvnc.vncserver.prelogin.plist Support
          [failed] com.splashtop.streamer.SRServiceAgent.plist Support
          [running] klpr-relay.plist Support
User Launch Agents:
          [loaded] com.adobe.ARM.[...].plist Support
          [loaded] com.facebook.videochat.[redacted].plist Support
          [running] com.pando.PMB.plist Support
          [failed] com.ruudburger.couchpotatoserver.plist Support
          [failed] com.ruudburger.headphones.plist Support
          [loaded] com.valvesoftware.steamclean.plist Support
User Login Items:
          runapp.command
          Dropbox
          Alfred 2
Internet Plug-ins:
          o1dbrowserplugin: Version: 5.3.0.18358 Support
          Default Browser: Version: 537 - SDK 10.9
          SlingPlayer: Version: (null) Support
          net.juniper.DSSafariExtensions: Version: (null) Support
          AdobePDFViewerNPAPI: Version: 10.1.9 Support
          FlashPlayer-10.6: Version: 13.0.0.206 - SDK 10.6 Support
          Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
          Flash Player: Version: 13.0.0.206 - SDK 10.6 Support
          iPhotoPhotocast: Version: 7.0 - SDK 10.8
          CitrixICAClientPlugIn: Version: 11.4.3 - SDK 10.0 Support
          googletalkbrowserplugin: Version: 5.3.0.18358 Support
          AdobePDFViewer: Version: 10.1.9 Support
          PandoWebPlugin: Version: PandoWebPlugin 2.3.3.8 Support
          QuickTime Plugin: Version: 7.7.3
          SharePointBrowserPlugin: Version: 14.2.1 - SDK 10.6 Support
          JavaAppletPlugin: Version: Java 7 Update 51 Check version
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
          Move-Media-Player: Version: npmnqmp 071706000001 Support
3rd Party Preference Panes:
          Flash Player Support
          Java Support
          Perian Support
Time Machine:
          Skip System Files: YES - System files not being backed up
          Auto backup: YES
          Volumes being backed up:
          Destinations:
                    MyBook [Local]
                    Total size: 2
                    Total number of backups: 2
                    Oldest backup: 2012-08-22 09:59:19 +0000
                    Last backup: 2013-05-08 19:40:47 +0000
                    Size of backup disk: Excellent
                              Backup size 2 > (Disk size 0 B X 3)
                    Time Machine Backups [Local] (Last used)
                    Total size: 0 B
                    Total number of backups: (null)
                    Size of backup disk: Excellent
                              Backup size 0 B > (Disk size 0 B X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
             100%          Microsoft Word
               3%          WindowServer
               2%          mdworker
               2%          Google Chrome
               0%          fontd
Top Processes by Memory:
          246 MB          iTunes
          180 MB          Google Chrome
          172 MB          WindowServer
          156 MB          com.apple.IconServicesAgent
          131 MB          Microsoft Word
Virtual Memory Information:
          3.54 GB          Free RAM
          2.59 GB          Active RAM
          730 MB          Inactive RAM
          1.15 GB          Wired RAM
          475 MB          Page-ins
          0 B          Page-outs

The likely culprit:
The problem is likely due to the discreet GPU failing. Download gfxCardStatus 2.3 and use it to disable the GPU. This is a temporary workaround until you get your motherboard replaced.
Possible other causes are the software that installed these:
com.splashtop.driver.SRXFrameBufferConnector          1.5
com.avatron.AVExFramebuffer          1.7
com.splashtop.driver.SRXDisplayCard          1.5
com.avatron.AVExVideo          1.7
Now they may be causing panics because the try to use acceleration in the GPU which leads to the panics. You are unlucky to have a particular model that has a real problem with this.

Im looking for some assistance in configuring our wireles...

Im looking for some assistance in configuring our wireless router to allow remote connections into it.. and then from there access any of the 5 computers on our network. I dont have the model number with me now, but just want to know where to start....
Goal=== to allow me to access our remote locations network and access / vnc into our 5 terminals...
I just need to know how i can configure the router to allow outside connections and then from there connect to our other machines via VNC...
Any suggestions on where to start with this?

in order to access the router remotely , you need to enable remote management on the router and to access the terminals using VNC .. you need to open the ports used by VNC ..

Looking for some help in creating an ItemFilter for a Targeter

Looking for some help in creating an ItemFilter for a Targeter
Need a examples for creating itemfilter and TargeterFirst

Hi David,
We can integrate Syncfusion with LightSwitch application, if you want to customize column when create a report using syncfusion reportviewer, since I didn't try this third party
extension before, I think you could consider getting help from
syncfusion forum, more syncfusion experts can help you on this issue.
Thanks for your understanding.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Lot's of questions...Looking for some answers

Similar Messages

Maybe you are looking for