LOT WISE INSPECTION RESULT
IS THERE ANY STD REPORT LIKE THIS MATERIAL AND LOT NO RESULTS MATERIAL NOT SUBJECT TO BATCH MANAGEMENT CAN ANY BODY KNOW KINDLY GUIDE ME
Are you just trying to see what materials are not batch managed? I'm not sure I followed exactly what you wanted.
You should be able to just get that from SE16.
FF
Similar Messages
-
Batch wise Inspection results details
Dear QM experts,
Is there any table / Report which give Batch wise quality details, like out of 1000 inspected Qty, 900 is Quality OK, 50 is Rejected, 20 is re test, 10 in in inspection like this....
Please suggest.
Thanks in advance.
Best Regards,
Sitarami ReddyHi
Make a layout in QA32. Am not sure about your exact requirement. As this seems to be a simple report you can get it in QA32. If not go for SAP query & make your ad hoc report.
Dinesh Krishnan -
Copy Inspection Results of one lot to other lots at a time
Dear Experts,
As per settings made under "Make Settings for Copy of Inspection Results" I am able to copy inspection results but still I am not getting what I exactly want. Below are different requirements explained in details
1. I am not able to copy twice on the same lot. e.g. if a lot has status RREC i.e. RR has been done then if at a later time I want to copy some other results over here then it's not happening.
In help.sap page somewhere it is mentioned that copy is possible if lot has status CALC. I want to have some configuration which I don't know for which SAP should allow the copy functionality with status RREC also.
2. By above functionality I want to do RR for several lots collectively at a time. E.g. if I have 100 lots then with same quality results it's tedious to copy results for each one by one. Like "QA16 - Collective Usage Decision" I didn't find any similar transaction for results recording(collectively).
3. Although my results are being copied from one lot another but MIC valuation are not being transferred given that I am not using any sampling procedure. I want manual valuation to be copied to the destination lots.
Any valuable suggestion will be highly appreciated.
Regards,Dear,
it is not clear from your question.
Please get more details,
In which release you are working?
In SPRO what special setting you made for this special case
Inspection origin is linked with no range/TL type/insp type.
Wher exactly you set this new configuration.
Please let us know so that we can simulate and help you out -
Inspection results for more than one lot
How do i see inspection results for different lots of the same material together in a single screen. Is there any standard report or query available in SAP?
PrahladDear Prahlad
You can see it in ways
1) Go to QS28. Input the plant and the mic and execute. You will get MIC details. Choose the MIC and click on Result history. A pop will appear Result history Limit Selection. In the Time Tab you can see inspection lot selection date From and To. Execute you will get the entire list of lots
3) Go to QA33 > result> Select the Mic> go Result historyhistory >In the Time Tab you can see inspection lot selection date From and To. Execute you will get the entire list of lots with all values and charts
4) standard reports such MCXD,QGP1 can be used
Hope this helps
Regards
gajesh -
Copying Inspection results from inspection lot.
Dear All,
Please explain me the process of copying inspection results in QM. Following is my clients requirement:
During receiving inspection they receive the same material in say 10 batches (coils). They want to create the independent batch for each coils of same material for tracking mechanism, so I don't have any option to generate that many number of lots.
Out of this 10 lots, say there are 2 masters (mother coils). Means there are two set of characteristics only which i need to copy for 5 lots each.
As I learn from SDN, EA - PLM need to be activated . But I don't know what are the adverse effects of activating same.
Please explain me the process.
Best Regards.
Shekhar MokashiHi Shekhar,
Refer the OSS note 855959 - Activation of Extension Sets via SPRO not successful.
I think all your doubts regarding to this Enhancement package will get resolved.
The big warning is given there in that note itself about implementing the EA-PLM enhancement is.....
Once an Enterprise extension set has been activated, it cannot be de-activated by de-selecting the option in the SPRO or otherwise, because BC Set activations cannot be undone.
Appart from that note refer the document for
Release Notes
SAP ERP Corporate Services
SAP enhancement package 2 for SAP ERP 6.01.
the link for the same is pasted here FYI.
[Chap_04_RNCorporateService|http://www.id.uzh.ch/dl/sw/sap/upgrade/Chap_04_RNCorporateService.pdf]
Even after this much stuff completion, you don't have your doubt cleared up then I would advice you to ask the question in [ SAP Enhancement Packages|/community [original link is broken]; forum.
Regards with lots of good luck wishes.
Shyamal.
Edited by: Shyamal Joshi on Jul 26, 2008 12:19 PM
Edited by: Shyamal Joshi on Jul 26, 2008 3:06 PM -
QM: Copying inspection results to another lot
Experts,
has anyone experience with automatic copying closed inspection results from one inspection lot to another one?
RgdsHaving seen some of your other postings and queries I'm wondering if your issue can't be solved by batch derivation or batch characteristic inheritance? These are available in 6.0. Not sure of your version. By using these functions, you can avoid creating a lot of your inspection lots possibly.
You can read up on these at:
Batch derivation: http://help.sap.com/erp2005_ehp_03/helpdata/EN/35/7b723c4356d068e10000000a114084/frameset.htm
Batch characteristic inheritance: http://help.sap.com/erp2005_ehp_03/helpdata/EN/3e/a6d5b1a3f5764e8274e015d5a1cee2/frameset.htm
Craig -
Copy the inspection result from one lot to multiples lots!!
Hi SAP expert,
I want to copy the inspection result from one lot to multiples lots, currently i know how to setup the copy to another lot(SAML Response from SAP ID Service ) , but i dont know to do to multiples lot.
¿Someone can help me?
Thank youFirst you have to customizing the functionality of Copy of Inspection Results using the following path, where you have to entry the inspection types, plant .etc., where you want to have the functionality.
SPRO -> Quality Management -> Quality Inspection -> Make Settings for Copy of Inspection Results
Then when you are in Record Result screen you select Menu -> Edit -> Copy Inspection Results ,
then a pop-up window is displayed and you filled in with the inspection lot which has the results and then another pop-up window is displayed to select the characteristics that you want to copy.
A.P. -
Multiple result recording for Manual inspection Lot using inspection point
I want to record inspection result for inspection type 89 against *inspection point*. Then I create new inspection point and assign it in quality plan. Then I have done the multiple result recoding against one manual inspection lot in DEV server. But when it is going to QAS server then error is coming during result recoding. Error is "The results transaction cannot be used for
inspection" Message no. QE094.
Plz give me the solution to record the result.Reason is very simple : the the inspection point definition in the task list header is incompatible with the sampling procedure assigned to the characteristic.Make sure that you select the appropriete radio button in QDV1 while creating sampling procedure and assign the same against each of the MIC's in the task list.
Make sure that the sample tab in QA02 is pressed while assigning the inspection specification & status of the lot is REL -
Hi All,
My client needs inspection report Work centre (date wise).
In MCXB it is coming work centre wise but moth wise I am gating.
In QGA2 its coming work centre and date wise but problem is after expanding the column all information is not there like accepted & rejected quantity, lot seize, percentage rejection, inspection origin.etc.
Please help me out, how to get such report.
Regards,
sidSAP does a lousy job of providing inspection result reports. There are not many ways to get the actual recorded value(s) for a test, or inspection lot.
For what you want, I woud suggest you develop a custom report.
FF -
Experts,
How come there is never any data for QM reports such as MCXA, MCXB, MCXD, MCXI although inspection lots are available in the system?
Is there another report that I can use to see inspection results in a table layout, e.g. list of batches on one axis, list of characteristics on another and the results?
Thanks!
RgdsSure you can. Simply add some of the standard characteristics to the batch class that SAP provides.
LOBM_APO_SL_MAX Max shelf life/maturity in sec
LOBM_APO_SL_MIN Min shelf life/maturity in sec
LOBM_APO_SL_UTC Reference time stamp of batch
LOBM_BPRIO Stock determination: priority
LOBM_BWTAR Valuation type
LOBM_HERKL Country of Origin
LOBM_HSDAT Date when batch was produced
LOBM_KRT waiting period of a batch
LOBM_LFDAT Batch determin. delivery date
LOBM_LGORT Storage location
LOBM_LVORM Deletion ind. for batches
LOBM_MBDAT Material availability date
LOBM_MENGE Batch determination sort qty
LOBM_QNDAT Next insp. date for batch
LOBM_QSCORE Qualityscore Usage Decision
LOBM_RLZ Remaining shelf life for batch
LOBM_RLZ_PROZ Req. remaining rntme in proc.
LOBM_UDCODE Usage Decision
LOBM_VERAB Availability date
LOBM_VFDAT Expiration date, shelf life
LOBM_ZUSTD Status of batch
Not all of these are suitable to add to the batch class. Some are designed strictly for batch search strategy classes. There are several OSS notes out there on the use of these. As you can see, several of these are date related. I usually always add LOBM_HSDAT, LOBM_UDCODE,and LOBM_VFDAT.
As you can see, the Batch number is not in the list of standard characteristics. This can be created however. Create a general characteristic with reference to table MCH1, field nanme CHARG and add this characteristic to your classes. You can then use it to search and sort for specific batches just like any other characeristic in CL30n. When displayed, the field is greyed out from user entry since it is a referenced field.
Craig -
Hi All,
In result recording inspection results can be copied to the actual inspection lot from an existing lot. Is this possible, if so where we have to this customizing.
NavinHi,
Pl go thro the forum post and doc link below
Re: Copy Inspection Results
http://help.sap.com/saphelp_47x200/helpdata/en/00/07cf2ec3b42046aeeb527773165efc/content.htm
Regards
K.M.Arun -
Hi Experts,
After inspection results being inputted, is there any standard TCODE in SAP which can list out the inspection results in detail (1 by 1)?
And also any program for listing what results required to be inputted but not yet inputted?
Thanks a lot!
Regards,
DanielHave you tried
MCXV
1
apart from QA32/QA33
Edited by: nbgore on Mar 31, 2011 2:14 PM -
Inspection result to multiple batches
Hello,
For my client, I need to figure out a way to get the inspection results from QM into multiple batches. Is there a simple (standard) way to do this?
The situation is that my client produces 3 batches at once. Samples for analysis are only taken from 1 of those 3 batches. After the analyses, at the usage decision, the values need to be copied into the characteristics of all 3 batches.
Anyone can help me out with this one?Hi,
That means you have only one inspection lot(manually created) for the production of 3 batches. But you can link only one material/one batch to an inspection lot in SAP. In your case, you can record the results for 1 batch and maintain the other batches in text field(that Inspection not required for other 2 batches).
By the way which inspectin type are you using?
WR,
Sanjeev -
Hi,
In QM i am trying to copy inspection results. For that all required customizations maintained, but still
copy inspection results option is not coming in EDIT tab of QE01 transaction.
I have cheked the pf status for the same it is E110 and main program is SAPLQEEM and in se41 under edit tab i am able to see the data transfer push code also +QECOPY, but it is not appearing at transaction level.
Do i need to do any coding to activate the same. Any help will be highly appreciated.
Thanks a lot in advance.Hi,
Are you able to see "copy insp results" in QA02 under Edit menu ?
Ref the link for details reg copy insp results
http://help.sap.com/saphelp_47x200/helpdata/en/00/07cf2ec3b42046aeeb527773165efc/content.htm
Regards
K.M.Arun
Edited by: ARUN KM on Mar 24, 2008 4:22 PM -
SAP QM Result recording - Copy inspection results functionality
Dear all,
I have two queries.
1) The Raw materials used in various plants are same. I want to copy the inspection results to the inspection lot if the batch is already accepted in other plant. The material, batch and vendor is common point. Some of the characteristics are caluculated characteristics. How to map this requirement.
2) I want to test the standard functionality for copy results but in my system, the settings for copy inspection results is not appearing in quality inspections in SPRO. I want to confirm whether I am missing some other setting.
Regards,
ManoharHello Jessica,
you could try the following bapis:
BAPI_INSPCHAR_GETRESULT
BAPI_INSPCHAR_SETRESULT
Although the desired functionality was actually implemented in higher releases.
Hope this helps you.
Regards,
Isabelle
Maybe you are looking for
-
I'm following the flex/facebook tutorial on adobe's site and when I run it in firefox nothing shows up, if i run it in internet explorer it shows the button... the tutorial I am working with is: http://www.adobe.com/devnet/facebook/articles/flex_fbg
-
Where is the tools in FF 7?
Where is the tools button in FF 7
-
Solution Manager IBASE and R/3 assets
Hi, In R/3 we have our Assets (tcode AS02) and we are using the tables ANLA, ANLB, ANLC, ALNH, ANLP and ANLZ. We want to setup the IBase in Solution Manager with data from the R/3 Assets. What I mean is, how can we import the Assets from R/3 in the I
-
How to customize a "distance" cell format?
I'd like to create (because, as far a I know, it isn't available) a cell format for distance. Specifically for yards, meters, miles, kilometers, etc. so that, for example, the cell would appear as 900yds or 12km (and the values could be summed in a f
-
Mac InDesign cs6 to PC InDesign CC
Hello everyone, I am having issues going from a Mac using cs6 to a PC using CC. I have templates for store signage, ads for all different media outlets that all have different sizes, etc. and my problem is with the logos and pictures not being recogn