Lots not genrating with insp typ 05 in depot

Hi QM guru,
i have maintain inspection type 05 in finish material master. the material is selling from depot ..Depot create sales order...when customer return default materials to the Depot. .inspection lot does not generate. .but material come in quality stock. and movement type show in MB51 655.
kindly suggest me how it will generate lots...when material comes in depot from customer
regards
Aqueel

Hi
Check whether inspection plan in QP01 for the same FG for return material with usage 5 and status 4 and also inspection type 05 is maintained in MM .
Check and revert
Regards

Similar Messages

Help!!! (CrystalDecisions.Web.CrystalReportViewer) is not compatible with the type of control (CrystalDecisions.Web.CrystalReportViewer)

Post Author: mrmc
CA Forum: General
Hi all,
Recently, I got problem on using cystal report on asp.net web. the error msg is:
Parser Error Message: The base class includes the field 'viewer', but its type (CrystalDecisions.Web.CrystalReportViewer) is not compatible with the type of control (CrystalDecisions.Web.CrystalReportViewer).
in the code:
<%@ Register TagPrefix="ce" Namespace="CrystalDecisions.Enterprise.WebControls" Assembly="CrystalDecisions.Enterprise.Web, Version=11.0.3300.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" %>
<CR:CrystalReportViewer id="viewer" runat="server" AutoDataBind="true" HasCrystalLogo="False" Width="350px" Height="50px" HasToggleGroupTreeButton="False" DisplayGroupTree="False" HasGotoPageButton="False" HasRefreshButton="True" DisplayToolbar="False"></CR:CrystalReportViewer>
In web.config
<add assembly="CrystalDecisions.Web, Version=11.0.3300.0, Culture=neutral, PublicKeyToken=1234567890"/>
the server contains crytal report 9 (come from .net studio) and crytal report 11 (installed standalone).
I googled this problem, it seems a lot of people got this problem but no solution...
could anyone help me? Thanks!

Post Author: david.wilkes
CA Forum: General
You might try Removing the Reference and re-adding the reference. That seemed to get me pass this error, but I ran into another error that I have not figured out yet.

"Goods Movement type not possiable with mvmt type 261"

Dear All,
I am doing 541 movement with Service order combination, i have found following error,
"Goods Movement type not possiable with mvmt type 261"
Can you help me for this error.
-Reards,
Sunil

Getting errors while using PI_GOODSMVT_CREATE' with 561+K

Goods movement not possible with mvmt type 991

Hi,
            As per requirement I need to create a GR for Purchase order wise. I tried to create using BAPI BAPI_GOODSMVT_CREATE but It returns the error message.
error: Goods movement not possible with mvmt type 991
LOOP AT gt_outtab1.
gt_outtab1-gr_wght       =   gt_outtab1-gr_wght.
   MOVE: gt_outtab1-matnr            TO gt_item-material,
          gt_zseed_po_qty-werks       TO gt_item-plant,
          gt_zseed_po_qty-lgort       TO gt_item-stge_loc,
         '901'                        TO gt_item-move_type,
          gt_outtab1-gr_wght          TO gt_item-entry_qnt,
          'B'                         TO gt_item-mvt_ind,
          '1'                         TO gt_item-stck_type,
          v_lifnr                     TO gt_item-vendor,
          gt_outtab1-ebeln            TO gt_item-po_number,
          gt_outtab1-ebelp            TO gt_item-po_item.
APPEND gt_item.
ENDLOOP.
CLEAR gt_item.
LOOP AT gt_outtab3 WHERE bqty IS NOT INITIAL.
    MOVE: gt_outtab3-bmatnr           TO gt_item-material,
          gt_zseed_po_qty-werks        TO gt_item-plant,
          gt_zseed_po_qty-lgort      TO gt_item-stge_loc,
         '991'                        TO gt_item-move_type,
          gt_outtab3-bqty             TO gt_item-entry_qnt,
          ''                          TO gt_item-mvt_ind,
          '1'                         TO gt_item-stck_type,
          v_lifnr                     TO gt_item-vendor.
    APPEND gt_item.
ENDLOOP.
CLEAR gt_item.
LOOP AT gt_outtab3 WHERE pqty IS NOT INITIAL.
    MOVE: gt_outtab3-bmatnr           TO gt_item-material,
         gt_zseed_po_qty-werks        TO gt_item-plant,
          gt_zseed_po_qty-lgort      TO gt_item-stge_loc,
         '942'                        TO gt_item-move_type,
          gt_outtab3-pqty             TO gt_item-entry_qnt,
          ''                          TO gt_item-mvt_ind,
          '1'                         TO gt_item-stck_type,
          v_lifnr                     TO gt_item-vendor.
    APPEND gt_item.
ENDLOOP.
***********Call goods movement BAPI
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
    EXPORTING
      goodsmvt_header = gs_header
      goodsmvt_code    = gs_code
    IMPORTING
      goodsmvt_headret = gs_headret
      materialdocument = gs_retmtd
      matdocumentyear = gs_year
    TABLES
      goodsmvt_item    = gt_item
      return           = gt_return.
so could you please let me know which are the parameters I need to pass to create GR?
regards,
tarun

Hi,
Go to T.code OMJJ . Give your your movement type 991. Check the allowed transaction and all the details in your left hand side and the settings done.
Thanks
Arbind

Goods movement not possible with movement type 702

Hi experts,
I have created a new movement type 702 (a copy of 602) for return delivery from customer.
When I create delivery I did not face any issue. However while doing post goods issue, I get error
"Goods Movement not possible with mvmt type 702."
Is there any configuration missing for post goods issue?
Please advise.
Thanks,
Pri

DEAR,
AFTER CHECKING IN "OMJJ" ...SEE WHETHER YOU HAVE NOT BLOCKED THIS MOVEMENT...
ALSO SEE IN OPTION WHETHER ALL TRANSACTIONS HAVE BEEN ENTERED LIKE
"MI01"
"MI02"
"MI31"
"MI07"
"MI37"
WE ARE PERFOMING THIS ACTIVITY USUALY SO PLZ PERFORM IT,,WE ACTUALLY BLOCK THIS MOVT TYPE AFTER ARE PHYSICAL INVENTORY...
OR EVEN IF THESE DOESNT WORK..
GO TO "SU01" IN WHICH PUT THE USER ID AND CHECK IN AUTHORISATION WHICH PROFILE IS ASSIGNED TO IT..
REGARDS
REWA

KANBAN - STO (error : Goods movement not possible with mvmt type 351)

Hi,
I have configured KANBAN STO in the system which is working fine.
I am able to empty the bin and create STO (purchase orders)
But when I select a bin and try to make it full, system gives error message:
"Goods movement not possible with mvmt type 351"
In KANBAN STO replenishment strategy, I have used movement type 101,
I m little confused from where this 351 movement type is coming from.
Please help resolvethis issue.
Pavan

Hi,
Below is the entire message:
Goods movement not possible with mvmt type 351
Message no. M7096
Diagnosis
You have entered a movement type that has not been defined for this transaction/event.
Procedure
Choose another movement type.
You can choose the movement type as follows:
If you know the movement type, enter it directly in the Movement type field.
Choose the movement type via the menu option Movement type.
Choose the required movement type from the possible entries.
If you do not find a suitable movement type, exit this function and choose a different goods movement from the Inventory Management menu.
Pavan

Goods movement not possible with mvmt type 961

hi all,
i got a error as Goods movement not possible with mvmt type 961
Can any body help me to know whether i can create GR for mvmt type 961.
mvmt type 961 is for third party transfer

Getting errors while using PI_GOODSMVT_CREATE' with 561+K

Goods movement not possible with mvmt type 561-error

Dear All,
I am using bapi BAPI_GOODSMVT_CREATE for goods movement. i am gettining Goods movement not possible with mvmt type 561 error.
please suggest me. i am using serial number also.
regards,
satish

Getting errors while using PI_GOODSMVT_CREATE' with 561+K

'Goods movement not possible with mvmt type 102'

Dear Experts,
I have to reverse the GR and I am using BAPI -> BAPI_GOODSMVT_CREATE and passing below information but I am getting error message as 'Goods movement not possible with mvmt type 102'. Could any one please tell me what would be the possible reasons to get this error and how can I fix this.
goodsmvt_header-PSTNG_DATE = 20110705
goodsmvt_header-DOC_DATE = 20110705
goodsmvt_code-GM_CODE = 06
goodsmvt_item-PLANT = 1400
goodsmvt_item-MOVE_TYPE = 102 <<< Reversal movement type
goodsmvt_item-ENTRY_QNT = 02
goodsmvt_item-ENTRY_UOM = SET
goodsmvt_item-PO_NUMBER = W299999508
goodsmvt_item-PO_ITEM = 0010
goodsmvt_item-MVT_IND = B
goodsmvt_item-XSTOB = ''. << space to use reversal types
Thanks in Advance
Venkat

Hi Please provide Material Document, Document Year and Posting date as shown below
MATDOCUMENTYEAR = DOC_YEAR.
GOODSMVT_PSTNG_DATE = POSTING_DATE.
MATERIALDOCUMENT = MAT_DOC
CALL FUNCTION 'BAPI_GOODSMVT_CANCEL'
    EXPORTING
      MATERIALDOCUMENT          = MATERIALDOCUMENT
      MATDOCUMENTYEAR           = MATDOCUMENTYEAR
      GOODSMVT_PSTNG_DATE       = GOODSMVT_PSTNG_DATE
    GOODSMVT_PR_UNAME         =
   IMPORTING
     GOODSMVT_HEADRET          = WA_GOODSMVT_HEADRET
    TABLES
      RETURN                    = IT_RETURN
    GOODSMVT_MATDOCITEM       =
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
      WAIT = 'X'.

Cannot cancel a GR: Goods movement not possible with mvmt type 502

Hi,
I was trying to cancel a goods receipt for an inbound delivery. However I ran into trouble with the following error message.
Goods movement not possible with mvmt type 502 .
Is there some configuration that I would be needed to make before I can cancel a goods receipt?
Thanks,
Arup

To expand on the above some,
check the mvmnt type used for the origanal GR and use the coresponding reversal mvnmt type.
or confirm for us that the origanal receipt was in fact a 501??
Edit: or use migo to cancel the GR doc.
cancelation > material doc
this will only be possible if the stock is still available (same status as well)

Goods movement not possible with mvmt type 109

Hello All!
I have following problem. I try to book the goods receipt with VL32n and movement type 109 and get following message: M7096 Goods movement not possible with mvmt type 109
- First I created a PO with Confirmation Control Key Inbound delivery
- Goods receipt ist booked with movement type 107 with MIGO
- I created an inbound delivery with movement type 109
Finally I want to book with VL32n the goods receipt, but the booking fails with error message 109. Any idea why.
Regarding some OSS notes, I thought that it could work this way.
Hoping for help,
Barbara

i am not sure that i read you correctly
the process for inbound delivery is
create PO; in PO conf control key set to inbound del.
create inbound del in vl31n
do MIGO on inbound del
if the inbound del is with 107 mvmt type the GR will bring it to valuated block stock
do 109 to move it from valuated block stock to unresticted stock.

Fleet Equipment-IFCU-Goods movement not possible with mvmt type 201

Hi Experts,
When I am trying to post the movement of consumed Fuel & Distance by IFCU,the error comes 'Goods movement not possible with mvmt type 201'.
Goods movement not possible with mvmt type 201
Message no. M7096
Diagnosis
You have entered a movement type that has not been defined for this transaction/event.
Procedure
Choose another movement type.
You can choose the movement type as follows:
If you know the movement type, enter it directly in the Movement type field.
Choose the movement type via the menu option Movement type.
Choose the required movement type from the possible entries.
If you do not find a suitable movement type, exit this function and choose a different goods movement from the Inventory Management menu.
I cheked some of old post but not solved.I have also maintained IFCU in OMJJ for allowed transaction for 201 & 202 movement type but still not working.
Please suggest me.

Hi Maheswaran,
Thanks for your reply.I have already configured,maintained the values and setting.
Please check and update if any other solution.
Regards,
Baiju

Requisition doc. type RV not allowed with doc. type

Using the tcode ME51n, I created an Outline agreement(Doc type RV) and when i go to ME31K to create a contract and select With Ref to Purchase requisition and enter the Purchase requisition #, I get the error message Requisition doc. type RV not allowed with doc. type.
I tried changing the settings for doc types for contract, but it doesnt seem to be working. Any solutions will greatly beappreciated.

This is the settings in PR: SPRO-MM-Purchasing-PR-Define document type
Doc type: RV     Outl. agmt. requisn.     10     01     02     RVB     R
once above is correct than
select the doc type RV and click on the allowed item category
where can see as below
Item cat Text item category
     Standard
K     Consignment
D     Service
select the doc type RV and click on the Link purchase requisitio in left side
MK     Quantity contract     M     Material unknown          Standard
WK     Value contract          Standard                          Standard
WK     Value contract     K     Consignment          Standard
WK     Value contract     M     Material unknown          Standard
WK     Value contract     W     Material group          Standard
Now go to contract doe type
you will see
MK     Quantity contract     10     02     AZ          SAP     MKK
WK     Value contract     10     02     AZ          SAP     WKK
select any doc type and click on allowed item category
here you would see
     Standard
K     Consignment
L     Subcontracting
M     Material unknown
D     Service
than click on link purchase requisition by selecting doc type MK or WK
RV     Outl. agmt. requisn.          Standard          Standard
RV     Outl. agmt. requisn.          Standard     K     Consignment
RV     Outl. agmt. requisn.          Standard     M     Material unknown
RV     Outl. agmt. requisn.     K     Consignment     K     Consignment
RV     Outl. agmt. requisn.     D     Service     D     Service
once you have all this set up than you can create the contract based on the RV reqs

Dreamweaver CS6 "not supported with this type of Mac" problem

When I try to open Dreamweaver CS6 on my Macbook Pro, it says "You can't open the application Adobe Dreamweaver CS6 because it is not supported with this type of Mac. I'm not sure if this is a question for Apple, but why would it not work on my Mac? My Illustrator, Photoshop, InDesign and Media Encoder all work just fine. Any help? Thanks!

rhgarson wrote:
No, I bought it brand new from Adobe. It says right on the back that it's for Mac OS X v10.6 or x10.7. I am running Mac OS X v10.7.4. Does this help? Or what other information would be helpful?
Yes you have given all the necessary information. I suggest try this link first:
<http://helpx.adobe.com/creative-suite/kb/start-installer-downloading.html>
This document has all the necessary info to install the software.

Embedding with JPA annot: column "is not compatible with expected type"

I have the following embed case (things I guess to be inessential omitted):
@Entity
public class Container {
@Id
@GeneratedValue
@Column(name="ID")
private long id;
@Embedded
@AttributeOverride(name="value", column=@Column(name="UID"))
private Uid uid;
@Embeddable
public class Uid {
private String value;
When I run this through the mapping tool to build the schema, it correctly builds the UID column in the MySQL Agreement table as a VARCHAR.
However, when I try to access the table, I get the following error (I've edited class names to match my simplified example):
RROR_SYSTEM_FAILED:
<4|true|4.0.0> kodo.persistence.ArgumentException: "Uid.value" declares a column that is not compatible with the expected type "varchar". Column details:
Full Name: Agreement.UID
Type: blob
Size: 0
Default: null
Not Null: false
     at kodo.jdbc.meta.MappingInfo.mergeColumn(MappingInfo.java:720)
     at kodo.jdbc.meta.MappingInfo.createColumns(MappingInfo.java:567)
     at kodo.jdbc.meta.ValueMappingInfo.getColumns(ValueMappingInfo.java:143)
     at kodo.jdbc.meta.strats.StringFieldStrategy.map(StringFieldStrategy.java:52)
     at kodo.jdbc.meta.FieldMapping.setStrategy(FieldMapping.java:101)
     at kodo.jdbc.meta.RuntimeStrategyInstaller.installStrategy(RuntimeStrategyInstaller.java:75)
     at kodo.jdbc.meta.FieldMapping.resolveMapping(FieldMapping.java:497)
     at kodo.jdbc.meta.FieldMapping.resolve(FieldMapping.java:456)
     at kodo.jdbc.meta.ClassMapping.resolveNonRelationMappings(ClassMapping.java:930)
     at kodo.jdbc.meta.ClassMapping.resolveMapping(ClassMapping.java:886)
     at kodo.meta.ClassMetaData.resolve(ClassMetaData.java:1761)
     at kodo.jdbc.meta.ValueMappingImpl.resolve(ValueMappingImpl.java:541)
     at kodo.jdbc.meta.strats.EmbedFieldStrategy.map(EmbedFieldStrategy.java:62)
     at kodo.jdbc.meta.FieldMapping.setStrategy(FieldMapping.java:101)
     at kodo.jdbc.meta.RuntimeStrategyInstaller.installStrategy(RuntimeStrategyInstaller.java:75)
     at kodo.jdbc.meta.FieldMapping.resolveMapping(FieldMapping.java:497)
     at kodo.jdbc.meta.FieldMapping.resolve(FieldMapping.java:456)
     at kodo.jdbc.meta.ClassMapping.resolveMapping(ClassMapping.java:890)
     at kodo.meta.ClassMetaData.resolve(ClassMetaData.java:1761)
     at kodo.meta.MetaDataRepository.processBuffer(MetaDataRepository.java:683)
     at kodo.meta.MetaDataRepository.resolveMapping(MetaDataRepository.java:635)
     at kodo.meta.MetaDataRepository.resolve(MetaDataRepository.java:518)
     at kodo.meta.MetaDataRepository.getMetaData(MetaDataRepository.java:288)
     at kodo.meta.MetaDataRepository.getMetaData(MetaDataRepository.java:352)
     at kodo.kernel.QueryImpl.classForName(QueryImpl.java:1879)
     at kodo.kernel.ExpressionStoreQuery$1.classForName(ExpressionStoreQuery.java:74)
     at kodo.kernel.jpql.JPQLExpressionBuilder.getClassMetaData(JPQLExpressionBuilder.java:151)
     at kodo.kernel.jpql.JPQLExpressionBuilder.resolveClassMetaData(JPQLExpressionBuilder.java:119)
     at kodo.kernel.jpql.JPQLExpressionBuilder.getCandidateMetaData(JPQLExpressionBuilder.java:203)
     at kodo.kernel.jpql.JPQLExpressionBuilder.getCandidateMetaData(JPQLExpressionBuilder.java:176)
     at kodo.kernel.jpql.JPQLExpressionBuilder.getCandidateType(JPQLExpressionBuilder.java:167)
     at kodo.kernel.jpql.JPQLExpressionBuilder.access$500(JPQLExpressionBuilder.java:30)
===
I can't figure out why it thinks something should be a blob. Any thoughts?
Thanks,
-- Bryan Loofbourrow

Ok, I found the problem. I hadn't added the Uid.java to the persistence.xml file, so although the mapping tool correctly recognized this as a varchar situation, the execution environment did not, taking Uid to be a nonpersistent class that it must treat as a blob.
-- Bryan

Lots not genrating with insp typ 05 in depot

Similar Messages

Maybe you are looking for