Lots of choices but little data; file out puts

Can someone please make some descriptions to help know when
or why to choose any of these? Or perehaps link to descriptions?
Which ones are the tiniest files?v Thank you

Steve,
It is all about the reason you are exporting.
Some of those are good for exporting video to be edited in other programs. NTSC DV for example. That is the format shot by MiniDV cameras. So if you are editing DV AVI, that would be a logical output for further editing in other applications.
Others, like H.264 are good for putting videos on web sites, or for YouTube or Vimeo.
File size is pretty much set when you export to DV. It is just under 13GB for an hour of video based on a 25Mb/s data rate.
Other codecs are more flexible. You can shrink the file size by shrinking the frame size, or lowering the frame rate, or most often, by lowering the bitrate. Scaling down the video has obvious results. Lowering the frame rate can cause stutter and is only good for certain footage, and reducing the bitrate starts to cause a lack of quality video.
Perhaps if you told us what you wanted to do, we could provide more specific suggestions.

Similar Messages

Remove Windows 8 users but keep data files

i am preparing upgrade from win8 to 8.1
all users are defaulted at another drive (d drive), not system drive
so i have to remove all the users in order to have upgrade without a need for clean reinstallation
this requirement make me (other system admin in the world) very troublesome
i have to be very careful when dealing user data files.
in official way, the user is deleted and all his files are deleted too.
is it possible to keep the user data files? the files size may be over 2xxG.
i do not wish to copy files before removal of user account. it wastes lots of time.
i tried to rename the user profile folder and remove user registry under profilelist registry.
it seems not Ok. any suggestion please. Thanks.

Hi,
As far as I know, if you have changed User folder location to other drive, you may encounter problem during upgrade Windows 8 to Windows 8.1. It is probably upgrade failed.
Actually, I still suggest you make a back up for your User Profile then upgrade your system. Or if Windows upgrade is unnecessary, I would like you keep using Windows 8 to avoid potential problem.
Roger Lu
TechNet Community Support

Hi ,related to CSV files out put.

hi all,
I am taking out put in ALV and .CSV format (in unix path ) .
And the ALV out put is fine.
In one of the material description the text is like this :
my name is (Activ.Foil+S,sr)
so for description in CSV it is taking like this : my name is (Activ.Foil+S
and for the next field the remaining text is going
i.e , for material group it is getting : sr)
and all the values are shifted by one field.
so the BW team facing the problem while extracting data ,
can any one please help me out how to solve this probelm.
Thanks and Regards.
C.Shamsundher.

Hi Prem,
In such case you need to change the delimitter or else remove the comma from Material description once you retrieve data from database into internal table.
REPLACE ALL OCCURRENCES OF ',' in WA_TAB-DESC with ' '.
Then move the material descritpion to the CSV file.
Best regards,
Prashant

Re-arrange the flat file out put in APD

Hi Guys,
I am loading data in APD,soruce is Query and target is Flat file.i want to re-arrange the out put file.
Let me know what are the possible ways to re-arrange the columns in the out put flat file.
Regards,
Jayapal

There are three ways to do this:
1. Use Hide or Rename Columns (Projections) under Transformations in between the query and the flat file (recommended method)
Under the field selection tab..transfer the fields to the right pane in the order you wish to view thwm in.
2.Drag and drop a routine
Go to source fields tab
Move the entries in the right to the bottom left 'Source Fields' pane.
Then go to the Target field tab.
Right Click on the row and click unfreeze columns
Now you can drag & Drap and re-arrange the fields.
Insert the routine in between query and Flat file
3. Change the order of the fields in the Query Definition( Not Recommended)
Cheers!

How to move data files out of Users folder that is in a small partition?

The small partition (50 GB) also has the System, Applications, Developer and Library folders. I would like to move my Documents, Pictures, etc folders from this small partition to the 200 GB partition, preferably without losing too much performance. Does it work just to physically copy them to the other partition and then delete from the Users folder, or does that create problems? I have read somewhere that this may cause a lot of disk searching delays or other more serious problems. Before I reformat the whole HD to a single partition, is there a faster, less drastic solution? Thanks.

I presume I need to use "file-level" copying to the one-partition drive, but is there anything else to consider?
Yes, if you're talking about CCC, then file level is all you can do copying from the drive you'r booted from, but normally best anyway as the copied files will be unfragmented.
When failures occur, I presume they are due mainly to mechanical failures of the drive mechanism, but do "volume failures" occur very frequently?
Very astute! It's rarely possible to just lose one partition & not others, but if it is HW failure on the HD, then likely all will be lost.
or perhaps to a format that can be read by all platforms (other software needed for that?
Actually, your Intel Mac can boot from an APM partition, you just can't install to it or do Firmware updates from it, but it saved my behind when my only IntelMac died recently & I gad everthing 10.5.8 on an APM Firewire drive, I just plugged it into my eMac & had everything available.
Of course99.9% of PPC Macs can't boot OSX from USB, & cannot run/boot 10.6.x
A few options...
You could format that HDD as Fat32/MS-DOS, but you'd be limited to 4 GB Filesizes.
NTFS-3G Stable Read/Write Driver...
http://www.ntfs-3g.org/
MacFUSE: Full Read-Write NTFS for Mac OS X, Among Others...
http://www.osnews.com/story/16930
MacDrive for the PCs... allows them to Read/Write HFS+...
http://www.mediafour.com/products/macdrive/

Trace file out put line shows 18726 but wc -l lists only 165

Friends,
the output of the trace file show "18726 lines in trace file"
when i run the linux command to count the number of lines
$ wc -l filename.txt
it shows only 165 lines.
Also, the manual count shows 165 lines.
so where are the remaining lines?
the parameter for max file size is unlimited.
thanks

Even if you do not filter any result set (F.ex. SYS=NO), the tkprof output is generally an aggregate output (unless you specify AGGREGATE=NO). So a statement doing a 1000 fetches, would still show up as one.
Even if you do specify AGGREGATE=NO, I doubt whether the line count in the original trace and converted text files will tally.

CSV , text file out put from flash exe

Hi,
I want to save data from flash exe to CSV file and text file
. OS is XP and there will be no server connections. Is this
possible. Please help.
Thanks,
Manu

If th ecomputer you're working with has some server software
running (Apache or IIS) you could save your data with php or asp.
If you don't then you could use the Shared Objects (which works as
a cookie, so you'll be e bit limited here). There was a function
called MMSAVE back in FlashMX, don't know it that still works, that
writes to a text file (but only in the development enviroment).
Let me know a few more details and we'll find a way.
Cheers
Gorka

Can file out put display array of messaged

Hi Folks ,
I am displaying the msg of RFC on a file .
So far so good
it is getting displayed propely
like
ID Msg
1 Faliure .
i am able to capture this msg and show in a file
but in some cases the RFC
returns more than one row
like
ID Msg
1 Created log
2 Sucess
3 Trying to update
4 Update
Is there a way were i can display the msg in the same way in o/p file
cureently my file only shows
ID Msg
1 Created Log

Hi,
In SXMB_MONI, is the source payload something like this?
<ID Msg>
<..>Created log<..>
</ID Msg>
<ID Msg>
<..>Sucess<..>
</ID Msg>
If so,you will have to change the occurence of the <ID Msg> header in the the target to 0 to unbounded, so that for every <ID Msg> created in the source a corresponding header is created in the target.
Regards,
Smitha.

Generate an ISO-EGV file out of a dat-file

...but my dat-file has no entries about sample rate, time of first sample, bit solution etc. Is there another possibility rather to use the EGV_CHECK ?

Hi,
DIAdem doesn't support a function to generate a ISO-EGV file, but it is possible to create a VB-Script to do this. Therefore it is of course necessary to know the structure of this file type or you can ask an alliance partner (like MeasX) to do this for you.
Greetings
Walter Rick

IPhone High Score Data File/Sort Oddities

Hello all.
I am working on an iPhone game which is nearly complete but I am having trouble with the following high score sort/write code. I am aiming to keep up to 10 scores, sorted from highest to lowest obviously.
The code creates a new data file with the current score added as first entry if there is no existing data file (and this works), or it creates a data file with the current score as first entry if a data file exists but is empty for some reason (and this works as well), or it adds the current score to a data file of existing scores if it is within the top ten or there are less than ten entries (this is where it gets odd).
If there is one existing score in the data file, the current score is added and sorted properly. If there are two scores in the data file, the application crashes BUT the data file shows the current score was correctly added and sorted to the existing scores. If there are three existing scores, the application crashes and the data file remains unchanged.
I have been over the logic many times and tried many different variations of the logic structure to no avail. I suspect it is something simple but I've been staring at it too long to see. Any ideas?
If there is a better way to display the code/formatting on the forum, please let me know. It doesn't look pretty this way and there must be a way to make it more readable here. I tried to manually format it some to help. The code follows (score variable is brought in from another class but works properly in my tests). At the end I have repeated an isolated snippet of the code where I think the problem occurs.
*CODE START:*
int i, ii;
struct highscoreentry {
NSString *name;
int highScore;
struct highscoreentry structArray(10);
FILE *fin = fopen("highscore.dat", "rb");
if (fin != NULL) { //if the data file exists proceed here
for (i = 0; i < 10; i++) {
if (fscanf(fin, "%s %d\n", structArray(i).name, &structArray(i).highScore) != EOF) { //if data exists for this iteration proceed
ii = i; //ii will be the last entry of existing data
for (i = ii; i > -1; i--) { //will begin at last entry and work up the list of scores to sort
if (score > structArray(i).highScore) { //if current score is higher than recoded score, recorded score moves down 1 place
structArray(i + 1) = structArray(i);
structArray(i).name = (NSString *)"JESSE";
structArray(i).highScore = score;
if (i == ii && ii < 9) //if there are less than 10 entries we will add another for our new entry
ii = ii + 1;
else if (score < structArray(i).highScore && i == ii) { //if current score is less than last recorded score it becomes new last entry
structArray(i + 1).name = (NSString *)"JESSE";
structArray(i + 1).highScore = score;
if (ii < 9)
ii = ii + 1;
fclose(fin);
if (fin == NULL) { //if the data file does not exist prepare data for new file
ii = 0; //will be used to limit write iterations to this single new entry
structArray(0).name = (NSString *)"JESSE";
structArray(0).highScore = score;
FILE *fout;
fout = fopen("highscore.dat", "wb"); //should create/rewrite data file from scratch
for (i = 0; i <= ii; i++) {
fprintf(fout, "%s %d\n", structArray(i).name, structArray(i).highScore);
fclose(fout);
*CODE END*
As far as I can tell by commenting out different portions of the code, the problem appears to be somewhere in here:
*CODE START:*
if (fin != NULL) { //if the data file exists proceed here
for (i = 0; i < 10; i++) {
if (fscanf(fin, "%s %d\n", structArray(i).name, &structArray(i).highScore) != EOF) { //if data exists for this iteration proceed
*CODE END*
...but it baffles me that this works with one structure in the data file, crashes with two structures in the data file but correctly processes/sorts them and writes the file properly, and crashes with three structures in the data file without doing any additional work.
Jesse Widener
www.artandstructure.com

Actually I've found online material to be adequately, and sometimes more than adequately, elucidating in learning the language. When I decided to take a stab at this I spent about 40 hours of my spare time the first week reading 2 or 3 different "takes" on the C/C++/Objective C language in addition to Apple's docs on their implementation along with the iPhone SDK. As I mentioned, I've thus far found the language quite clear and concise. I began my application the second week and this is the first time in 7 weeks of coding where I've felt the need to ask assistance. Every other problem I've solved, leaving no errors, warnings or leaks in my software and accomplishing every task I've set to this point.
I find reading several different "takes" on a subject helps fill out an understanding from different perspectives. In this case, one perspective might lead the reader to believe or misunderstand the full use/context of a particular syntax, while reading from multiple sources can show the same syntax used in different contexts, broadening the understanding of its use, and that understanding can be user further to interpolate uses in a variety of situations.
I am new to C/C++/Objective C and the iPhone SDK, but I am not new to programming. It may have been some time (other than hand-coding my website the last few years) and my language experience may be limited to BASIC, HTML, PHP and Javascript, but from my view learning a new language is relatively easy once you know one...even if it is BASIC. The general logic structure remains the same. The overall software design concept remans essentially the same. Both are going to use variables, arrays, subroutines, memory allocation/management, input and output of data, runtime logic, etc. I am 80-90% sure I know exactly how I want to attack a coding problem every time...I just need to know how to "say it in C".
I don't remember when I first started coding, but I know by age 7 I wrote a karaoke style "Happy Birthday" for my great aunt with music playing through a Commodore 16 via "beeps" figuring the particular vibrations per second of the speaker (the hertz values) and durations for each note in time and pitch perfectly along with "lyrics" printed to screen with the music. To me, learning C is like learning a new foreign language. I took 2 years of French in high school and had to study at it but aced it nonetheless. I then opted to take Spanish but after a semester I opted to stop because the pacing was too slow. Learning Spanish after learning French was a piece of cake. They are in the same general language family and the syntax construction is very similar. I only needed the raw data of the words to fit to the rules I already knew. I didn't need to learn the same rules a second time.
The C/Objective C language seems no more complicated than it need be, which is to say it seems simple in doing what it needs to do and I am impressed with that simplicity thus far. I am also impressed with Apple's implementation with regard to the iPhone. Being able to provide music via 4-5 lines of code using AVAudioPlayer is transcendental compared to "beeping" every note monophonically.
Apple's explanations are very clear and concise. It is just, sometimes their examples are sparse or too narrow in scope to get a rounded context. However, their docs are very good and there is a wealth of information here on the net. My biggest complaint with Apple's docs really stems from the fact they seem to want to shove Interface Builder at everything and provide the code to do so but leave the reader stranded if the reader would rather stay within XCode exclusively and do more programmatically rather than leave that much "behind the curtain" work to Interface Builder...but it is a minor complaint.
On pointers...I do understand the use of pointers, perhaps not to the nth degree as I am just starting out, but the concept makes sense to me. I understand they are not "content" but a memory address location of the "content". I also understand why pointing to a location which is undefined or unprotected is damaging to whatever may be in that location already and to the data being pointed since it can be inadvertently overwritten my some other memory using item.
{quote}No. The (i < 9) condition is critical. Writing to structArray[10] will crash, since structArray[9] is the end of the array. In practice such a crash might not happen right away, though. If our program's data allocation actually ended at the end of the array, the crash would be immediate. But what usually happens when we write past the end of an array is that the beginning of some other data is overwritten.{quote}
I need to slap my forehead on this one. I know better than that. I don't know why I missed that. Too many late nights I suppose.
{quote}(NSString*) is called a type cast in that context.{quote}
Yes, which is why I used it to deal with the incompatible type error I thought I had at that point, but I shouldn't have assumed by appeasing the compiler I was necessarily solving the problem.
{quote} The best I can do for now is to caution that an enquiring mind, like all virtues, can be taken too far. I think it's important to compromise and copy good models sometimes. This isn't just to avoid reinventing the wheel. Sometimes it's good to remember we only have a limited time on Earth.{quote}
Agreed...and I don't expect to understand every nuance the first time around. I expect to at least understand how each successful line of code works in its context, but I imagine some processes will take a few times through before it "clicks" how it works in a greater context than its own, and I am all right with that. I also understand deadlines are deadlines whether they be software development or otherwise and a broad eye needs to be kept to remaining on the track forward.
Anyway, off to my day job.
Thank you again...I began reading up on NSDictionary and NSUserDefaults last night. Will post soon.
Jesse Widener
www.artandstructure.com

Data / Data files / Database GROWTH

Dear experts,
I have a practical question on reading / determining the exact fluctuations in the sizeof
a database.
I am publishing this question in the oracle section, as my database is oracle, but if I am
not wrong, all this should be valid for all databases.
So, the question itself: I have a system, where all the datafiles / tablespaces are set to
AUTOEXTEND, the size for each growth is 200 MB (meaning, if growing automatically,
the increment size will be 200 MB). Now I would like to see, if datafiles grew automatically,
lets say for today! And if yes - by how much increments.
Furthermore, I would like to ask - browsing ST04, in Space / Database / Overview on the
history tab - all the daily / weekly / monthly changes - how to evaluate, whether this was
only an "internal" growth, when the database grew in account of decreasing the free space
in the DB itself, and when it has also caused a data file to grow automatically, as it has its
AUTOEXTEND option enabled ???

Dear Deepak,
after quite a lot of googling,I found this:
SELECT TO_CHAR (sp.begin_interval_time,'DD-MM-YYYY') days, ts.tsname,
max(round((tsu.tablespace_size* dt.block_size )/(1024*1024),2) ) cur_size_MB,
max(round((tsu.tablespace_usedsize* dt.block_size )/(1024*1024),2)) usedsize_MB
FROM DBA_HIST_TBSPC_SPACE_USAGE tsu, DBA_HIST_TABLESPACE_STAT ts, DBA_HIST_SNAPSHOT sp, DBA_TABLESPACES dt
WHERE tsu.tablespace_id= ts.ts#
AND tsu.snap_id = sp.snap_id
AND ts.tsname = dt.tablespace_name
AND ts.tsname NOT IN ('SYSAUX','SYSTEM')
GROUP BY TO_CHAR (sp.begin_interval_time,'DD-MM-YYYY'), ts.tsname
ORDER BY ts.tsname, days;
It comes the closest to what I really need. And what I need, is the above query,
but by data file, not by tablespaces.
Thanks a lot!!

Printer prints but no ink comes out

have all in one printer 8500. my printer prints but no ink comes out. put new ink in and cleaned printer heads. did printer head cleaning 3 levels and still not printing, no error messages. running xp on main computer. hooked in network through router.

Hi there,
Welcome to the HP Forums!
I noticed that your HP 8500 will print but no ink comes out, and I am happy to help you!
I am also glad that you had already put new ink in, and cleaned the printheads.
For further assistance, I will need to know your printer's Product/Model number. As there are multiple HP 8500 printers. To find your printer's Product/Model Number follow instructions in this link. Finding Your HP Product Model Number.
Hope to hear from you soon, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HT3964 the headphone jack on my 13inch pro(2011model) isnt out putting any sound..

how can i fix this...
when i go to setting, i can flip the connection and make it an input rather than an output. it will pick up my iPhone through an aux cable, while playing music.. but it won't out put any sound when in output mode... i've hade this mac for little over a year.. this issue occord a few weeks ago.. im a dj, i need this to work,,, help me
[email protected]

Reset PRAM. http://support.apple.com/kb/PH4405
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best.

Out put its not coming in PL/SQL

Hi
i have one PL/SQL coding i excuted sucessfully but i'm not getting out put.i created one table and insert the values also.but still .output its not coming.my question is
(i)i want to display all the employee name and salary of all the employees
SQL> create table empdet
2 (ename varchar2(15),
3 salary number(8,3),
4 dept varchar2(14));
Table created.
SQL> insert into values('vijay',10000,'manager');
insert into values('vijay',10000,'manager')
ERROR at line 1:
ORA-00903: invalid table name
SQL> ed
Wrote file afiedt.buf
1* insert into empdet values('vijay',10000,'manager')
SQL> /
1 row created.
SQL> begin
2 for empdet in (select ename,salary from employee)
3 loop
4 dbms_output.put_line(empdet.ename||''||empdet.salary);
5 end loop;
6 end;
7 /
PL/SQL procedure successfully completed.
Note:
1.i creat the table
2.insert the values
3.i exectuted PL/SQL query but output its not coming.

i did but agine same problem out put its not coming.if u don't mine can u exectue this query in ur system
SQL> SET SERVEROUTPUT ON
SQL> begin
2 2 for empdet in (select ename,salary from employee)
3 3 loop
4 4 dbms_output.put_line(empdet.ename||''||empdet.salary);
5 5 end loop;
6 6 end;
7 /
2 for empdet in (select ename,salary from employee)
ERROR at line 2:
ORA-06550: line 2, column 1:
PLS-00103: Encountered the symbol "2" when expecting one of the following:
begin case declare exit for goto if loop mod null pragma
raise return select update while with <an identifier>
<a double-quoted delimited-identifier> <a bind variable> <<
close current delete fetch lock insert open rollback
savepoint set sql execute commit forall merge
<a single-quoted SQL string> pipe
The symbol "2" was ignored.
ORA-06550: line 3, column 1:
PLS-00103: Encountered the symbol "3" when expecting one of the following:
loop

ALV custom controller out put format

hi all,
i want to show out put with headline ex:
sales quatation
1 check box quatation id description
Sales Order
2 check box sales order id description
Sales Invoivces
3 check box sales invoice id description.
but i am getting out put
1 check box quatation id description
2 check box sales order id description
3 check box sales invoice id description.
how can i show the out put based on my requirement.
we are using custom cntroller is there any other way to show ouput based on Headline.please provide some example

Hi,
Try to Use these Classes CL_GUI_ALV_TREE (ALV Tree Control)
CL_GUI_ALV_TREE_SIMPLE (Simple ALV Tree) .
And also use this Class CL_GUI_TREE_MODEL, and when creating the object set the selection mode to cl_list_tree_model=>node_sel_mode_multiple.
Regards ,
S.Saravana

Lots of choices but little data; file out puts

Similar Messages

Maybe you are looking for