Lots of errors with 7900GTX
This is obnoxious. I got the nVidia forceware drivers for Windows XP 64x, and they worked fine for a time. NOW, however, if I try to play Counterstrike:Source and go into the "video stress test" to see where I should set everything, it breaks down. Seems fine for the first few seconds, then tearing starts to occur, random freezing, slowdowns, inconsistent framerates (jumping from 200 to 10 with every frame), rainbow dots, vertical sync gets worse and worse as time goes on, etc. etc. Then, when I exit that, lots of flashing and flickering. Finally, when I try exitting CS:S altogether, the video card just dies, making a mishmash of color and moving and flashing and gross stuff. Anybody know WHY this happens, and HOW to fix it?
P.S. the logger said that the GPU's temperature never exceeded 44 degrees Celcius even while under the heavy load that the video stress test provides.
I have the the same card (MSI 7900gtx) and i have the same problem as you.. I cant run any extensive 3d program for very long because when i exit the card locks up windows, distorts my desktop and flashes a black screen at me repeatedly. My only solution is to manually reboot the pc. My card also runs cool throughout the whole proccess.
Im going through hell right now too because i sent the the card back to New Egg and now they refuse to refund or exchange the card because i cut the the upc sticker off the side of the box to take advantage of the rebate through MSI. They should tell you on the front page when they advertise their prices with a rebate that if you take advantage of it it means they literally wash their hands of the product and will not honor any replacements or refunds.
From what i read and my own experiance the problem only gets worse so be prepared to pack it up and ship it back wether to the vendor you purchased it from or MSI's rma program. This whole experiance has turned into a complete nightmare for me and it doesnt look like a solution near so here i am browsing forums because i cant play any games on this about dead ati 700 pro.
I hope you have better luck getting it resolved than i am..
Similar Messages
-
I'm having a lot of problems with the hotmail account, regularly is indicating an error in the server, that I have to introduce the password again that late that this is wrong. I have changed the password making this shorter but it does not work.
bump? Is bumping allowed? Lol.
I just really need some help here. -
I downloaded different books on my iPad from iBook but when I try to read them the book isn't complete and I see lots of pages with error.
Have you tried closing the iBooks app completely and seeing if it works ok when you re-open it ? From the home screen (i.e.not with the iBooks app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the iBooks app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
If neither of the above work then you could also try deleting the app and re-installing it - as long as the books are still in the store and you use the same iTunes account as you originally used then you can re-download them for free : http://support.apple.com/kb/HT2519 -
I took a lot of pictures and video on my recent trip to Ireland. Now I am trying to download the photos and videos from my iphone to my mac - iphoto. I have tried 3 times and each time (at a different point) I get a message telling me that there was an error with one of my photos and it wont load the pictures. Help!!
Try using Image Capture to download to a folder on the Desktop. If there's a damaged file on the iPhone that's preventing the download you can isolate it with Image Capture and then delete it from the iPhone.
-
Lots of problems with newer MacBook Pro
I bought my first Mac about a year and a half ago. Unfortunately I've had lots of problems with it. I need to get it repaired, but I'm not sure what's wrong. I live in Thailand so I want to have some idea of what's going on before taking it to a shop (so they don't try to price gouge me).
The first problem happened about 9 months after i bought it. The computer would become incredibly slow. Sometimes it would take 15 minutes to boot up and sometimes it wouldn't boot up at all. But sometimes it was fine. If it did boot up, sometimes when I'd go into a folder in Finder, nothing would show up. The spinning loader graphic would just spin at the bottom of the Finder window. I ran a disk check and it said it found multiple errors that could not be fixed. I erased the hard drive and reinstalled Lion and everything seemed fine. Since I live in Thailand and I need my computer for work, I didn't want to ship it off to Apple to be fixed. It seemed fine after formatting the hard drive, so I figured it was fixed.
About 3 months later the problem came back, but much worse. I couldn't boot up or anything. I took it to a small Mac repair shop because at this point the 1 year warranty had expired. Of course inside the shop it booted up fine and I had to explain to the guy that for 5 days I haven't even been able to turn it on. Finally after restarting 4 times it began slowing down and he could see what I was experiencing. He said he could try replacing the hard drive, but couldn't guarantee it would fix it. I needed my computer badly at this point so I said let's try. I came back a couple days later and he had transferred everything to the new hard drive and installed it. Everything seemed to be working fine.
That worked, although sometimes (rarely) something weird would happen, like the computer would just shut down for no reason. But, the DVD drive stopped working. It loads a disc OK, but it can't read it and won't burn a DVD. One time it wouldn't eject my DVD for about 30 minutes. I was trying everything I could find on Google. Finally it spit it out.
Now, about 6 months later, I was watching a movie and about 10 small colored boxes popped up on the screen. They went away after a few seconds, so I closed my movie and went to shut down my computer. The entire screen then filled with horizontal rainbow colored static. It stayed for about 30 seconds, then the screen turned grey. I could hear and feel the fans blowing at full speed.
And then for about a full day it went away, until earlier today. As I was backing up all my files I played a quick part of a movie. The same squares popped up on the screen so I immediately closed the movie and they went away.
I finished backing up and then erased the hard disk. I started installing Mountain Lion, and it stopped at about 75%. I canceled the installer and restarted. After a few seconds the screen turned solid blue with white staticky lines. And now that happens every time I turn on the computer after about 30 seconds. There's no operating system because before I can even get to the installer before the screen goes.
Sorry for the huge amount of info. I just don't have enough experience with Macs to know what's going on. My current issue resembles a video card problem, the issues before resemble a hard drive and DVD drive issue. Replacing the hard drive fixed it temporarily. Could a problem with the logic board cause all of these issues?
Thanks for any help with this.A few things to note...
If you had contacted Apple about each of the issues that you reported here, they would have kept a log of the problems that would help them determine whether to continue support after the warranty expires.
You might consider asking about "Flat Rate Repair Pricing." See the discussion thread here and note that some users report that the flat rate repair pricing is only available in the U.S. and Japan.
gavin310 wrote:
(typically they just ship your computer to Singapore instead of working on it "in-house" from what I read).
Actually, I had great experiences with two different macs sent to the repair depot. One computer had narcolepsy on day one. Apple sent me a box, I packed up the PB and dropped it off at UPS. Apple fixed and returned to my house two days later. The second MBP had a known video card problem. I took it to an Apple Store Genius who ran a specifc test and deduct that it was the known defective video card. The store was out of parts and ordering would take a week. Knowing my past experience with the Repair Depot, I ask for that option. The genius took my MBP and shipped it to the depot that night. Three days later, I received the fixed MBP and on the work order, their tests showed failed fans that they also replaced. Three or four weeks later, the Apple Store called to tell me they got the video card in stock.
Gather up your grit, perseverance, and persistence before contacting Apple. Try bypassing phone support by contacting them via their online support system with the link I provided in the previous post. (I remember using the online support system and was able to choose to have them call me. At the time, I had AppleCare so i'm not certain with out-of-warranty.) Another option is to seek an authorized Apple service provider.
Good Luck! -
Guys,
I really am having a lot of problems with a program. I got the program to compile but it looks absolutely nothing like it is supposed to look. I have a deadline for tomorrow and sent my teacher an email but the chances of him getting back to me by tomorrow night for a weekend is pretty much slim to none. Anyways I am sending my output and if anyone could give me advice or feedback on why it does not look right if it is something small and if its alot of things go ahead and call me dumb.
here is my code:
import javax.swing.JOptionPane;
import java.awt.*;
import java.awt.event.*;
public class Checkerboard extends Frame implements ActionListener
private Panel topPanel;
private TextArea topDisplay[];
private Panel bottomPanel;
private TextField startField = new TextField(10);
private TextField stopField = new TextField(10);
private TextField stepField = new TextField(10);
private Label startLabel = new Label ("Start");
private Label stopLabel = new Label ("Stop");
private Label stepLabel = new Label ("Step");
private Button goButton;
private Button clearButton;
private boolean clearText;
private boolean first;
private int start;
private int stop;
private int step;
//constructor methods
public Checkerboard()
//construct components and initialize beginning values
topPanel = new Panel();
topDisplay = new TextArea[16];
goButton = new Button("Go");
clearButton = new Button("Clear");
first = true;
bottomPanel = new Panel();
int start = 0;
int stop = 0;
int step = 0;
bottomPanel.add(startField);
bottomPanel.add(stopField);
bottomPanel.add(stepField);
bottomPanel.add(startLabel);
bottomPanel.add(stopLabel);
bottomPanel.add(stepLabel);
bottomPanel.add(goButton);
goButton.addActionListener(this);
bottomPanel.add(clearButton);
clearButton.addActionListener(this);
clearText = true;
//set layouts for the Frame and Panels
setLayout(new BorderLayout());
topPanel.setLayout(new GridLayout(4, 4, 10, 10));
bottomPanel.setLayout(new GridLayout(3, 3, 5, 5));
//construct the Display
for(int i = 1; i <= 15; i++)
topDisplay[i] = new TextArea(null, 3, 5, 3);
//set color to the panel
//row 1
for(int x = 1; x <= 4; x++)
//set color for
setBackground(Color.white);
//row 2
for(int x = 5; x <= 8; x++)
//set color for
setBackground(Color.white);
//row 3
for(int x = 9; x <= 12; x++)
//set color for
setBackground(Color.white);
//row 4
for(int x = 13; x <= 16; x++)
//set color for
setBackground(Color.white);
//add components to frame
add(topPanel, BorderLayout.NORTH);
add(bottomPanel, BorderLayout.CENTER);
//allow the x to close the application
addWindowListener(new WindowAdapter()
public void windowclosing(WindowEvent e)
System.exit(0);
} //end window adapter
public static void main(String args[])
Checkerboard f = new Checkerboard();
f.setTitle("Checkerboard Array");
f.setBounds(50, 100, 300, 400);
f.setLocationRelativeTo(null);
f.setVisible(true);
} //end main
public void actionPerformed(ActionEvent e)
//convert data in TextField to int
int start = Integer.parseInt(startField.getText());
int stop = Integer.parseInt(stopField.getText());
int step = Integer.parseInt(stepField.getText());
for(int i = 1; i <=16; i++)
setBackground(Color.blue);
for(int i = start; i <= stop; i++)
setBackground(Color.yellow);
//test clear
String arg = e.getActionCommand();
//clear button was clicked
if(arg.equals("Clear"))
clearText = true;
start = 0;
stop = 0;
step = 0;
first = true;
setBackground(Color.white);
startField.requestFocus();
} //end the if clear
}//end action listener
}//end classThis will incorporate arrays, for loops, and Frames all in one.
Create a panel containing an array of 16 TextArea components that change color to correspond with the start, stop, and step values entered by the user. Perform the following tasks to create the Checkerboard Array application shown below. When the user enters the start, stop, and step fields and then clicks the Go button, the results are also shown below.
1. Call your application Checkerboard.java
2. You will need the following variables� declare them as private:
a. 16 component TextArea array
b. a Panel to hold the array
c. 3 TextField components with length of 10
d. 3 int variables to receive the start, stop, and step values
e. 3 Labels to display the words Start, Stop, and Step
f. a Go button
g. a Clear button
h. a Panel to hold the 3 TextFields, 3 Labels, and the 2 Buttons
3. Create a constructor method to:
a. construct each of the components declared above and initializes the start, stop, and step variables to zero (when constructing the TextArea components, use the following parameters: null, 3, 5, 3)
b. set the Frame layout to BorderLayout
c. write a for loop to loop the array and set each of the 16 TextArea components in that array so they cannot be edited. In the same loop, set each of the TextArea components text to be 1 more than the index number. Also in this same loop, set the background of each of the TextArea components to white.
d. set the Panel for the TextArea components to GridLayout with 4 rows, 4 columns, and both gaps set to 10
e. set the Panel for the TextFields, Labels, and button to GridLayout with 3 rows, 3 columns, and both gaps set to 5
f. add the components to their respective Panels
g. make the buttons clickable
h. place the Panels in the Frame� put one in the NORTH and one in the CENTER
i. Enter the addWindowListener() method described in the chapter� this is the method that overrides the click of the X so it terminates the application
4. In your actionPerformed() method:
a. convert the data in your TextFields to int and store them in the variables declared above
b. write a loop that goes through the array setting every background color to blue
c. write another loop that�s based on the user inputs. Each time the loop is executed, change the background color to yellow (so� start your loop at the user�s specified starting condition. You�ll stop at the user�s specified stopping value. You�ll change the fields to yellow every time you increment your loop based on the step value. REMEMBER: Your displayed values are 1 off from your index numbers!!)
5. Write a main() method that creates an instance of the Checkerboard Frame.
a. set the bounds for the frame to 50, 100, 300, 400
b. set the title bar caption to Checkerboard Array
c. use the setVisible() method to display the application Frame during execution
6. After you get all of this complete, include error handling to make sure:
a. the values entered in the TextFields are valid integers
b. the start value is greater than or equal to 1 and less than or equal to 16
c. the stop value is greater than or equal to 1 and less than or equal to 16
d. the step value is greater than or equal to 1 and less than or equal to 16
e. the start condition is less than the stop condition
f. when an error occurs, give an error message in a dialog box that is specific to their error, remove the text from the invalid field, and put the cursor in that field so the user has a chance to re-enter� this can be accomplished by using multiple try/catch statements
g. only change the colors if the numbers are valid
7. Create a clear button as seen in the example below. This button should:
a. clear out all 3 TextFields
b. change the background color of all TextArea array elements to white
c. put the cursor in the start field
8. Document!!
I know you guys are probably busy with your own stuff but any help and I would certainly appreciate itgot the yellow boxes to come up but just one box.....so is there something wrong with my yellow set background because I am not seeing any more errors
//packages to import
import javax.swing.JOptionPane;
import java.awt.*;
import java.awt.event.*;
public class Checkerboard extends Frame implements ActionListener
private Panel topPanel;
private TextArea topDisplay[];
private Panel bottomPanel;
private TextField startField = new TextField(10);
private TextField stopField = new TextField(10);
private TextField stepField = new TextField(10);
private Label startLabel = new Label ("Start");
private Label stopLabel = new Label ("Stop");
private Label stepLabel = new Label ("Step");
private Button goButton;
private Button clearButton;
private boolean clearText;
private boolean first;
private int start;
private int stop;
private int step;
//constructor methods
public Checkerboard()
//construct components and initialize beginning values
topPanel = new Panel();
topDisplay = new TextArea[16];
goButton = new Button("Go");
clearButton = new Button("Clear");
first = true;
bottomPanel = new Panel();
int start = 0;
int stop = 0;
int step = 0;
bottomPanel.add(startField);
bottomPanel.add(stopField);
bottomPanel.add(stepField);
bottomPanel.add(startLabel);
bottomPanel.add(stopLabel);
bottomPanel.add(stepLabel);
bottomPanel.add(goButton);
goButton.addActionListener(this);
bottomPanel.add(clearButton);
clearButton.addActionListener(this);
clearText = true;
//set layouts for the Frame and Panels
setLayout(new BorderLayout());
topPanel.setLayout(new GridLayout(4, 4, 10, 10));
bottomPanel.setLayout(new GridLayout(3, 3, 5, 5));
//construct the Display
for(int i = 0; i <= 15; i++)
topDisplay[i] = new TextArea(null, 3, 5, 3);
topDisplay.setText(String.valueOf(i+1));
topDisplay[i].setEditable(false);
topPanel.add(topDisplay[i]);
//add components to frame
add(topPanel, BorderLayout.NORTH);
add(bottomPanel, BorderLayout.CENTER);
//allow the x to close the application
addWindowListener(new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
} //end window adapter
public static void main(String args[])
Checkerboard f = new Checkerboard();
f.setTitle("Checkerboard Array");
f.setBounds(50, 100, 300, 400);
f.setLocationRelativeTo(null);
f.setVisible(true);
} //end main
public void actionPerformed(ActionEvent e)
boolean done = false;
//test go
String arg = e.getActionCommand();
//go button was clicked
if(arg.equals("Go"))
//convert data in TextField to int
int start = Integer.parseInt(startField.getText());
int stop = Integer.parseInt(stopField.getText());
int step = Integer.parseInt(stepField.getText());
while(!done)
try
if((start <= 1) && (start > 16)) throw new NumberFormatException();
else done = true;
} //end try
catch (NumberFormatException f)
JOptionPane.showMessageDialog(null, "You must enter start between 1 and 16", "Error", JOptionPane.ERROR_MESSAGE);
startField.setText(" ");
startField.requestFocus();
} //end catch
try
if ((stop < 1) && (stop > 16)) throw new NumberFormatException();
else done = true;
} //end try
catch (NumberFormatException f)
JOptionPane.showMessageDialog(null, "You must enter stop between 1 and 16", "Error", JOptionPane.ERROR_MESSAGE);
stopField.setText(" ");
stopField.requestFocus();
} //end catch
try
if ((step < 1) && (step > 16)) throw new NumberFormatException();
else done = true;
} //end try
catch (NumberFormatException f)
JOptionPane.showMessageDialog(null, "You must enter step between 1 and 16", "Error", JOptionPane.ERROR_MESSAGE);
stepField.setText(" ");
stepField.requestFocus();
} //end catch
try
if (start > stop) throw new NumberFormatException();
else done = true;
} //end try
catch (NumberFormatException f)
JOptionPane.showMessageDialog(null, "Stop cannot be larger than start", "Error", JOptionPane.ERROR_MESSAGE);
startField.setText(" ");
stopField.setText(" ");
stepField.setText(" ");
startField.requestFocus();
} //end catch
} //end while
for(int i = 0; i <=15; i++)
topDisplay[i].setBackground(Color.blue);
for(int i = start; i <= stop; step++)
topDisplay[i].setBackground(Color.yellow);
} //end the if go
//clear button was clicked
if(arg.equals("Clear"))
clearText = true;
startField.setText("");
stopField.setText("");
stepField.setText("");
first = true;
setBackground(Color.white);
startField.requestFocus();
} //end the if clear
}//end action listener
}//end class -
Hello, I use photoshop cc 10 days and I did a lot of files with layers and channels.
For two days in two different locations that only happens in some documents when you reopen the job done no more .. Example 6 channels on the facts I see only one ..
Thank you for your attention.
AnnalisaDon't understand what you writing here. Screen shoots would be most helpful.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc. -
A lot of problems with Oracle BI SEE 11g
I have a lot of problems with Oracle BI SEE 11g
1. I upgraded my BI SEE 10 repository and can it openning in offline mode.
2. I can't deploy my upgraded repository in EM MW Control 11g - when i try to open Farm_bifoundation_domain->Business Intelligence->coreapplication, i get error "Stream closed
For more information, please see the server's error log for an entry beggining with: Server Exception during PPR, #41".
Opening Logs by EM control doesn't work too.
in file middleware\user_projects\domains\bifoundation_domain\servers\AdminServer\logs\AdminServer.log i see this event:
<Error> <HTTP> <oratest.itera.ru> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <b639ac3e56e9a463:bd6fa7f:12ac7271e09:-8000-00000000000009e8> <1283408423378> <BEA-101019> <[ServletContext@329875093[app:em module:/em path:/em spec-version:2.5]] Servlet failed with IOException
java.io.IOException: Stream closed
Have you any ideas?
3. Ok, i taking sample repository and adding a new datasource in it:
Database: Oracle 8i
Connection pool:
Call interface OCI 8i/9i
Data source name:
(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (Host = oraapp) (Port = 1521) ) ) (CONNECT_DATA = (SID = MYSID) ) )
This settings are working fine in BI 10.
In BI 11g i get this funny error: "The connection has failed". I lost my time in attempts to connect to Oracle DB 8, but have not results. After that i hacked button "Query DBMS" at "Features" tab, pressed it and when get error "ORA-03134: Connections to this server version are no longer supported.".
Therefore Oracle 8 DB as datasource not supported. Am i right?
4. In sample repository i added oracle DB 10 as datasource, then added two dual tables and their connection to all layers.
Now i open BI Answers, and trying to create report with one dummy column, Now i have this error:
Error
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 42016] Check database specific features table. Must be able to push at least a single table reference to a remote database (HY000)
SQL Issued: SELECT s_0, s_1 FROM ( SELECT 0 s_0, "ORA10G"."dual"."dummy" s_1 FROM "ORA10G" ) djm
Database features are defaults.
Does anyone solve this problem?Turribeach, Thanks for you time.
1. It was not a question
3. Yes, i have read platforms, but not supported datasources. Now i see, that BI 11g support as datasource Oracle DB 9.2.0.7 or higher. I am sorry.
4. I'm using OCI connection type
Now i recreate Database in Physical schema and answers is showing report data for me! But only from one table, when i use columns from to tables from one datasource, i geting error:
Error View Display Error Odbc driver returned an error (SQLExecDirectW). Error Details Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 46008] Internal error: File server/Utility/Server/DataType/SUKeyCompare.cpp, line 875. (HY000) SQL Issued: SELECT s_0, s_1, s_2 FROM ( SELECT 0 s_0, "Ora10g"."hierarchy_obj_cust_v"."sort_order" s_1, "Ora10g"."NSI_SCHEMA"."SCHEMA_NAME" s_2 FROM "Ora10g" ) djm
Edited by: serzzzh on 03.09.2010 3:44 -
Error With SCORM Content W Latest Version of Sun Java (1.6.0_10)
We're getting an error with users running the more recent version of Sun Java 1.6.0_10, but not with previous versions. This happens for all our SCORM content.
The Java logs are showing a lot of data, but the main symptoms seem to be:
network: CrossDomainXML: connection to host <our LMS server address> denied
LMS Error: 304 - Security exception
and
Error stack trace:
oracle.apps.ota.lms.LMSException: java.security.AccessControlException: access denied (java.net.SocketPermission <our LMS server address> connect,resolve)
and
Returned: "false"
*** LMSGetLastError() [Thu Oct 09 10:56:35 EDT 2008]
Returned: "304"
*** LMSGetErrorString("304") [Thu Oct 09 10:56:35 EDT 2008]
Returned: "Security exception"
Our crossdomain.xml fille is configured correctly, and also previous versions of JRE are not having the problem (the Java logs look clean).
Does anyone have any thoughts?
Thanks.Hi All
Got a similar issue with the tracking / bookmarking of sessions - when on sun Java update 7 all is well however when update 10 or 11 is installed then SCROM session start on page 1 not the page you were on, also as expected they do not get marked as complete.
Two things happen
1) A small window is left for - [http://riti04.cornwall.nhs.uk:7780/ilearn/en/learner/jsp/relogin.jsp] - URL
2) We get an Error on page - [http://riti04.cornwall.nhs.uk:7780/ilearn/en/learner/jsp/lms.jsp] - URL
Looked for the Plugin section as per a pervious within the Java Control panel - but I'm not seeing it.
We use iLearn 5.0 and I am begining to think we need a patch but unsure which.
Thanks
Stephen -
BPEL: invalid namespace error with DB adapter polling and java embedding
Hello
I'm using bpel 10.1.3.1.0, and I'm experiencing the following problem: I'm am not able to use the SetTitle() function in a process which polls for records using the db adapter.
Steps to reproduce the problem:
- I create a very simple bpel process which poll for records in a table.
- I deploy it, write manually a record in the polled table and the process start.
- I can see the record picked up through the visual flow in the console
- everything looks ok and the process ends correctly
- now I add a java embedding activities just after the receive
- I set the instance title like this: setTitle("Go");
- redeploy, write a record in the polled table and the process start.
- but the process ends in error with the following message "XMLDOMException has been thrown. invalid namespace for prefix xmlns"
And there is no way to make it work. Consider:
If I put the same java embedding activity in another process, for example a simple asynchronous process which just copy the input to the output, and I run from the console, the instance title is set as I want ("Go")
If I remove the three lines from the polling process
<bpelx:exec name="Java_Embedding_1" language="java" version="1.3">
<![CDATA[setTitle("Go");]]>
</bpelx:exec>
then the process is executed correctly again. I add them again and then namespace error.
Whatever statement I put in the java embedding activity (for example a string concatenation or even just a comment I have the same result: invalid namespace for prefix xmlns.
Does anybody has a suggestion to evercome the problem? I need to set the title because its a mess to find out which instance processed a specific record.
Thanks by
PaoloI made a lot of further tests, and I can say the problem is related only to the database adapter polling mechanism.
If I create an asynchronous process, with any kind of database activity (for example select) I can set the title normally.
If I create a process which start with database table polling, then I cannot use the java embedding.
try this:
- create BPEL empty project
- drop a database adapter service and follow the wizard:
- select a connection (I tried both oracle or sqlserver connection)
- select "poll for new or changed record"
- select any table empty or with few record inside (1 or 2)
- press next 4 times
- chose delete record after read (press next)
- chose order by "no ordering" in polling options (press next 2 times)
- now drop a receive activity on the process, and connect with the polling partner link
- drop a java embedding and write any valid java statement
- deploy; if the table is empty, write a recod in the table
- the process is instantiated, but the it fails in the --> receive <-- activity with "invalid namespace" error -
Printing error with t-code FBCJ: Can not find PDL for output device prtloc
Hello , folks ,
The error with my system show the details as follow :
Cannot find PDL type for output device prtlocal
Message no. FPRUNX113
Diagnosis
No PDL type has been found for the specified output device.
System Response
Error message
Procedure
Contact your system administrator.
Procedure for System Administration
For more information, see SAP Note 685571.
Our Basis can not solve the problems .
anybody know what's wrong with it ?
Thanks a lot .other problems could be:
C drive is full
ADS folder under C:\Temp are write protected -
Compiling error with /usr/bin/ld: cannot find -l error
With the help of ToddLittle, I have solved a lot of problem with tuxedo as I am a freshman to it.Thank you ToddLittle!
However I meet a new problem with compiling my new program. I got this error:
/usr/bin/ld: cannot find -l/home/cjf/oracle/tuxedo12.1.1.0/include
where /home/cjf/oracle/tuxedo12.1.1.0 is my tuxedo installation path.
I build it under ubuntu 12.04 64 bit and my IDE is eclipse.
How to solve it? thanks!Usually it is best to execute the script that is installed in the Tuxedo installation directory that sets up all the necessary environment variables. That script is $TUXDIR/tux.env. Source that script before trying to use buildclient or buildserver or any other Tuxedo command to solve most problems like this.
PS You might want to check out Solaris Studio if you want to use an IDE as there is a Tuxedo plug-in for it that really helps in developing Tuxedo applications.
Regards,
Todd Little
Oracle Tuxedo Chief Architect -
Error with Sound Blaster Audigy 2 installation...driv
Hi
I am really stuck with this issue and was wondering if someone out there could help. I have an Audigy 2, and have had it working for a long period of time. I had to re install Windows not so long ago and since then I have found a number of errors with my sound.
Firstly there are a lot of pops and clicks when either gaming or playing audio files. Admittedly the pops and clicks happen a lot more when gaming (multiple sounds playing at once ?).
Therefore I decided to come onto creatives site and download the new drivers for my sound card. I was still running the original drivers from the CD supplied, so felt it was about time.
I downloaded the file SBA2_PCWDRV_LB__84_55-R, which is the correct update for my card and tried to install it.
It comes up with a message:
Setup could not detect and Sound Blaster Audigy 2 on you system.
Please ensure that your sound blaster hardware is properly installed before running this setup program.
setup will not exit
After that message i was a little confused, because as far as I was concerned everything was working ok, sound was coming out and was coming out correctly from my 5. surround system.
So i double clicked on the Creative Volume Control to check everything was on.
I'm not sure if this is an error but a long the top where you select the output device mine says:
SB Audigy [A000]
I'm not 00% sure but I don't think it said that before, I think it said something else, but I could be wrong.
I decided to uninstall my sound card and re-install. Everything installed absolutely fine from the CD, recognised the card and no complaints.
So I tried to re-install the driver update, and same message. (And the output device is still SB Audigy [A000].
Again I uninstalled and tried the Beta patch on the off chance that that would work, still nothing, it does not recognise the card in my computer.
I definately have an Audigy 2 and it has worked properly allowing me to update it before.
Sorry to have such a long message, but I am really confused about all of this and would really like to get everything working properly.
Any advice and help would be appreciated.
Thanksfedepolito,
I assume that you are running WinXP with Service Pack 3. Did you do a clean sweep of all the Creative Software and reinstall from the A2ZS CD? Do you get sound then?
Me disculpo que no entend?a que todo que usted dijo en su poste. Asumo que usted est? funcionando Windows XP con el Service Pack 3. ?Usted hizo un retiro del barrido limpio de todo el Creative software? (Busque los foros para el "clean sweep." ) ?Despu?s de eso, cuando usted reinstala del CD de Audigy 2 ZS, usted consigue el sonido?
Message Edited by Katman on 03-29-2009 2:59 [email protected] -
GTC Page Not loading - Error with Resource Bundles
I am using following OIM Software:
OIM 9.1.0.2
Linux x86
While accessing the GTC Manage Page, I am getting the Search button, Once I click the Search for all GTCs, It is throwing me error with "Contact Sysstem Administrator"
During the investigation, I found that I am getting the following error when I access the xlWebApp through Web:
===============
INFO,16 Aug 2010 11:58:35,171,[XELLERATE.WEBAPP],Property global.resultSet.Form~Information.Description.create~generic~connector not found in en locale bundle.
INFO,16 Aug 2010 11:58:35,171,[XELLERATE.WEBAPP],Property global.resultSet.Form~Information.Description.manage~generic~connector not found in en locale bundle.
INFO,16 Aug 2010 11:58:35,172,[XELLERATE.WEBAPP],Property global.resultSet.Form~Information.Description.Reset~self~password~menu~item not found in en locale bundle.
INFO,16 Aug 2010 11:58:35,172,[XELLERATE.WEBAPP],retrieving object from cache key = xlCustomClienten
INFO,16 Aug 2010 11:58:35,172,[XELLERATE.WEBAPP],Property global.resultSet.Form~Information.Description.Change~self~password~menu~item.Change~Self~Password~menu~item not found in en locale bundle.
INFO,16 Aug 2010 11:58:35,172,[XELLERATE.WEBAPP],Property global.resultSet.Form~Information.Description.Create~generic~connector.Create~Generic~Technology~Connector~menu~item not found in en locale bundle.
INFO,16 Aug 2010 11:58:35,172,[XELLERATE.WEBAPP],Property global.resultSet.Form~Information.Description.Manage~generic~connector.Manage~Generic~Technology~Connector~menu~item not found in en locale bundle.
===============
I added the following in customResources_en.properties
global.resultSet.Form~Information.Description.create~generic~connector=create generic connector
global.resultSet.Form~Information.Description.manage~generic~connector=manage generic connector
global.resultSet.Form~Information.Description.Reset~self~password~menu~item=Reset self password menu item
global.resultSet.Form~Information.Description.Change~self~password~menu~item.Change~Self~Password~menu~item=Change Self Password menu item
global.resultSet.Form~Information.Description.Create~generic~connector.Create~Generic~Technology~Connector~menu~item=Create Generic Technology Connector menu item
global.resultSet.Form~Information.Description.Manage~generic~connector.Manage~Generic~Technology~Connector~menu~item=Manage Generic Technology Connector menu item
I am trying so many options with these two files, however the error is not changing at all. Also, do I need to add this to customDefaultResources.properties?
Any suggestions?
Thanks in advance. I will assign Points.
Regards
Vijay ChinnasamyLCMan wrote:
Carolyn Samit wrote:
Did you read my response to you??
Yes. However, I don't believe it's an enycryption issue. It's something to do with javascript.
Regardless of what the issue is, the only (temporary) fix seems to be to use Firefox. However, I would have to agree with what Carolyn Samit said. Carolyn is a very active member here and knows a lot of things. -
Every time i try to update or restore my iPhone 4 (5.1) it tells me a lot of errors and it stuck in recovery mode :/ any help?
Well, if you want or need help, it would be a good idea to start with telling us what those errors are. We're not mind readers.
Maybe you are looking for
-
Disp+work stop because of shared memory?
Hello Gurus, I have an SAP server that will not start. It was running previously, but after a parameter update and an instance restart, I cannot get the dispatcher running. System is Windows 2012 Server, MSSQL 2008 R2, 16 Core 132 GB RAM. I believe i
-
My husband has an iPad and I just got one for me. We both have the same e-mail address. The message I get when I try to initiate setup is that the Apple ID is already in use. Any ideas on how to complete the setup of the new iPad since we both sha
-
Batch processing InDesign CS5 files
When I select either individual InDesign files or the entire folder to batch process to a pdf I get a message that says that the InDesign files can't be found or opened. It initially wanted to launch ID CS4 so I uninstalled that thinking that was the
-
Inbox synchronization error in iOS 8
Goodnight everyone, I found a curious error in the company. I have two Exchange 2010 servers, both with the same functions installed and replicating including the database (DAG). Well, just a sudden, a single user, you already use your mailbox set up
-
HTMLB custom cell renderer error
Greetings- I have created an I-View based on the JSP dyn page that uses the HTMLB tableView. One of the columns calls a cell renderer class. This I-View works perfectly on my "local" portal, which is the eval version of EP6 SP4. However, when I upl