Lots of folks on vacation this and next week
If you're concerned that your questions and threads aren't receiving much attention, it's not intentional. Quite a bit of the team is out on holiday as this seems to be the peak of summer vacation time for us.
We'll have another Early Adopter Release and more time to work through the bugs and usability issues with our new features.
Thanks for the great feedback and keep it up!
I have 2 mini iPods, in few cases (and not everytimes), while just after doing the Restore, it showed the same icon as yours. I plugged into an (USB) ac charger, it did not work, so I used the Firewire ac charger instead or even connected iPod with my iPod HiFi, which managed to complete the Restore process.
It does not mean that I suggest you to buy a firewire ac charger, bring your mini to an apple shop to prove it.
Similar Messages
-
Hi I´m from Brazil and next week I´ll be In NY , where i Bought my iphone 4. I want to know if I could go to apple store to exchange to iphone 4s W
I know I have to pay more for that , but is there that possibility?You can buy an iphone 4s.
There is no trade in. -
Report Issue: Previous Weeks, Current Week and Next Week Values
Hello Folks,
this is a typical requirement...at-least typical for me..
we have 20 weeks of data at weekly level. we have four Metrics out of which two are coming from Database and rest two are calculated metrics.
Metric0: On Hand Qty
Metric1: Past Qty
Metric2: sell Qty
Metric3: unsell qty
Metric4: Total Qty
the report will always be shown for 20 weeks, but depending on whats my current week, all the past weeks should be flagged as Past Week. (so i wrote a case statement for this). for Instance: I am in Week11, so my weeks in should be Past Week, Wk11, Wk12.........Wk20.
Metric 1 is always dependent on result of Metric4 (This is the Complexity) per week basis
Metric1 for Past weeks value in Week Column will be wk1 to wk10 On Hand Qty (fox ex: 80)
Metric4 for Pass Weeks Value in Week Column will be Metric1 for Pastweeks + Metric2 for Past Weeks (For Ex: 20) (Past weeks mean wk1 to wk10)
value of Metric4 is now 100
Metric1 for Week11 Now should 100 (From Past weeks Calculation)
Metric4 for Week11 will be Metric1 for Week11(100) + Metric2 for Week11(10) + Metric3 for Week11 (10)
Now...Metric1 for Week12 will be 120 which is wk11 total (100+10+10) and goes on Until Week 20
Any Ideas how to achieve this in obiee 10g
Thanks
RakePlease try out in this way....
Database level --Create opaque view & procedure or function to get the week total,week ago total, current week , Past week ,future week & do rpd modelling and use PIVOT VIEW.
At answers:
1.Here Previous week M4 is the current week M1 which means it is a cumulative value carried forward week by week.
2. M2 & M3 are direct database columns.
3. You have time hierarchy with WEEK Level.
M1 - ago(rsum(m2+m3),weeklevel)
M4- RSUM(M2+M3)
week -AGO(RSUM(M2+M3)- M2-M3-RSUM(M2+M3)
w1-0-10-20-30
w2-30-11-21-62
w3-62-12-22-96
Now you can PIVOT IT to get in
W1-W2-W3
M1 0 - 30-62
M2 10-11-12
M3 20 -21-22
M4 30 - 62-96
NOW PASTWEEK (W1-W10), CURRENT WEEK(W11)-W12
1.as you see cumulative here you need to use BINS.means ( case when week <= currentweek(maybe variable) then prior) else week)
2. UNION - combine similar request - First cirteria week <= w11 and second criteria week > week 11 --combine pivot it. Use sum agg in fx criteria1.
Hope this should solve your pblm at answers.
Edited by: MK on Oct 27, 2011 12:48 PM -
Hi folks its my mothers 40th next week and im looking to get an iphone4s or 5 from apple and then pay back monthly as in buy now pay later . i do not want contract . Im only 19 and cant afford to buy one right away although i can pay monthly back to apply if i was to get the iphone. Help needed here and thank use
This is Apple's financing program in the US if you want to buy an iPhone without a carrier subsidy:
http://store.apple.com/us/browse/finance/instant_credit_page
Whether you could qualify I can't say. And as Lawrence said, even without a contract the plans from the carriers are expensive, so you will need to consider whether you or your mother can afford the monthly ree.
Regards. -
Siri does not interpret 'This Week' vs 'Next Week' correctly
OK this seems really mixed up to me. I seems that Siri does not correctly interpret 'This Week' versus 'Next Week' correctly.
Environment information:
Phone = iPhone 4S
Language setting = 'British English' as there is, unfortunately, no 'Australian English'
Region Format = Ireland (because that is the only one which gives desired region formats € etc. bit of an issue with iOS in that it does not have customisable localisation settings like OS X)
Voice Control = English (Australia) (because that's the best English of course - my native English )
Date the Siri tests were done = Saturday, 5th of November 2011
I would consider that if one said a day (Mon, Tues, Wed etc.) this week that it would refer to the days in the current week which is Monday 31st Oct - Sunday 6th Nov. (and no, I'm not American so I don't have the unusual idea that Sunday is the first day of the week ).
Regardless of the above, if I said to Siri on Saturday 5th November, "What's the weather like next Monday" I would expect to get back weather for Monday of the next week, that is Monday 7th of November. But this is what I get...
Huh? Why does it want to go out to the next, next week?? Which is what the 14th November (14/11/2011) would be.
So then I asked for the weather for this Monday - which I would expect to be the Monday of this week which would be Monday 31st October. But Siri gives me the result for next week (as I am still in this week and this Monday has passed).
OK then Siri what if I ask you "What's the weather like Monday next week". Uhhhh you give me next week's Monday but you call it "this Monday".
Finally, if I ask Siri what is the weather like this weekend it correctly gives me this weekend - Saturday & Sunday. So it knows I think Saturday & Sunday are the weekend. If I say "what's the weather like next weekend" it says "I can't check the weather out to 13/11/2011" which is the Sunday of the next weekend. So it seems to understand weekends, not weeks.
I've been using 'this week' and 'next week' for many years, and I don't think I'm confused - so I am calling Siri confused.
Any comments, anyone able to shed light on this?Hi Kevin, I will do the bug report.
Hi Steve, that probably is true. The NeatVideo plug-in in AE and PPro is also the same - at least the technician in NeatVideo claims that. So, then it must be PremierePro itself reading or interpreting the .R3D files incorrectly.
Remembering that NV plug-in asks the host application for adjacent frames, I made also an experiment (in PPro) with how much is cut from the beginning of the clip with the following results:
- as told before, if the clip is not shortened from the beginning, NV gives good results
- if I shorten the clip only one or two frames, the result is not much worse
- if I shorten the clip ten frames, the results are getting worse
- if I shorten the clip couple of seconds, the results are getting even worse
- the more I shorten the clip from the beginning, the worse results I get...
The clip I've tried has steady movement (the camera moves steadily in one direction). Therefore, I guess PPro gives different time references for the frame played and the adjacent frames NeatVideo plug-in is asking for. If the clip has been shortened on the timeline only a bit, then they still work quite well as references for NV to be used. And the more the clip has been shortened on the timeline, the less the "asked frames" work as a good comparison. It seems as if NV plug-in asks frames based on the length of the original clip, and PPro gives frames counted from the beginning of the edited clip on the timeline. Hence the bad quality. -
MDVP for next week Planned orders
Hi,
I keep in my system this week production orders and next week firm planned orders so that I can see the plan in my system and system can check the availabilty on planned order for next week missing parts. Now my qyestion is:
Suppose there is matewrial X which is having planned orders from today to next 14 days. Now for this week I run the MDVP for first 7 days for this material "X"and it gives 50% confirmation availabilty of components. But what is happening with me is when I run the MDVP for next 7 days for the same "X" it gives 100% . why? On which logic it is doing like this? If for first 7 days it is 50% then why for next 7 days it is 100%.
Please explain me at what logic MDVP checks the material availabilty? is it checing the planned delivery time and GR time of components in material master ?
Regards
Deepak SharmaTHe possiblility may be the arrival or availabilityof the raw materials on those dates...
i.e there might be Pur reqs for the raw materials already raised in the system.. and they are expected to be available for the next 7 days.....
please check..
karthick -
I am doing a lot of presenting with the ipad and want an app that would bullseye or show where I am to my audience. Anyone know of something like this?
It sounds like either your hard drive or the SATA cable that connects it to the motherboard are failing. This could be heat related in your case, which is why you see it after it runs awhile. You can take it to the Genius Bar for a free evaluation. If you decide to test it yourself, I usually suggest moving the hard drive to an external enclosure. If it works there for awhile, the cable is probably the issue.
http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_3?ie=UTF8&qid=1397647657&sr=8-3&keywords=2.5+enclosure
http://www.ifixit.com/Device/MacBook_Pro_13%22_Unibody_Mid_2009 -
My iPad mini retina display wifi 16 GB is showing blank white display and is like frozen. I can't shut it down or restart. It was working perfectly till 13/4/2015 night and next day morning it showing this problem.There is no physical damage to my iPad and is in perfect good condition. I updated the latest OS 8.3 version 3 days before this issue happened. I took it to the apple authorised service centre but to my shock they told the display and unit has to be replaced which will cost me Rs.15000/-. It's just been one year and 7 days only since i bought my iPad,i.e, just 7 days out of warranty period only.I don't find any fault with the hardware neither no physical damage is there. Need help to sort out this issue.
My iPad mini retina display wifi 16 GB is showing blank white display and is like frozen. I can't shut it down or restart. It was working perfectly till 13/4/2015 night and next day morning it showing this problem.There is no physical damage to my iPad and is in perfect good condition. I updated the latest OS 8.3 version 3 days before this issue happened. I took it to the apple authorised service centre but to my shock they told the display and unit has to be replaced which will cost me Rs.15000/-. It's just been one year and 7 days only since i bought my iPad,i.e, just 7 days out of warranty period only.I don't find any fault with the hardware neither no physical damage is there. Need help to sort out this issue.
-
No inspection lot can be opened for this material and vendor -QA228
Hi every one !
Iam getting Error while doing Migo -"No inspection lot can be opened for this material and vendor-QA228"
we analyze the issue asfollow -
1.checked Quality Lot-Available
2.Quality info record- Availble
3. Quality plan is exist.
But stil throwing above Error.Hi,
Check the below threads,
[No inspection lot can be opened for this material and vendor;
[No inspection lot can be opened for this material and vendor; -
When I attempt to open lightroom I recive this message: [ Lightroom encountered an error whenreading from itspreviw cache and needs to quit.Lightroom will atempt to fix this problem next time it launches.] I did this a few times but no resoulve
It isn't a file, it's a folder. It will have the same name as your catalog, but will have the extension data. It will be in the same folder along with your catalog. If you need to use the search feature to search for *.lrdata.
-
I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried uninstalled and installing the app and the error remains. I have windows 8. Can anyone please help???
Use Windows Explorer to open the folder containing your catalog. The normal location is Pictures\Lightroom. Locate a folder with the extension .lrdata and delete that folder. Then you should be able to start Lightroom again, and Lightroom will begin building and new previews folder. Do not delete anything else.
-
I get the following window on loading Lightroom 5.7 -
Lightroom encountered an error when reading from its preview cache and needs to quit.
Lightroom will attempt to fix this problem next time it launches.
I have tried several restarts, without success. Also reinstalled Lightroom; no joy
Any suggestions?Using your system browser (Windows Explorer or Finder), open the folder that contains your catalog. In Windows it is in your pictures folder and then in a Lightroom folder. Inside of the Lightroom folder you will find another folder that has the extension .lrdata. It will have the same name as your catalog except for the extension. You need to delete that folder, and then start Lightroom again. Lightroom will generate a new previews folder, and you should be back in business.
-
my old ipod has lots of music on it this was connected to a computer that was stolen, I now have a new ipod thats all connected with music on to my replacement computer, how can i get my old ipod music onto my new library and new ipod
Try these 2 User Tips...
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991 -
I would like to use Find My Phone for friends and family to follow me during the NYC Marathon next week. Is there a way to set up or temporarily change my User ID and Password for this purpose?
New York Runners has an app that is specially designed to do exactly that. It's (or will be) available in the App Store.
http://www.nytimes.com/2011/10/27/sports/for-new-york-city-marathons-fans-a-cell phone-app-to-keep-in-touch.html?ref=technology
You might also look at apps like RunMeter. It will let you send updates by email, Facebook or Twitter. Glympse is another app that, though not designed specifically for runners, might also be useful. -
I am trying to clean up my iMac hard drive and find a lot of space in a folder named 'Deleted Users'...what is this and can I delete it to save space?
If a user account is deleted and the data for that account is not deleted, it is placed there. Yes, you can delete the files there.
Maybe you are looking for
-
Menu options in the Tools toolbar in EBS (R12).
Hi, I would like to create a custom menu option under the Tools toolbar on a specific form. Could someone point me in the direction of any good documentation on how to do this? Regards Carl
-
Why is the transportation C02e 4x higher for Macbook pro 15" compared to iMac 27".
Why is the transportation C02e 4x higher for Macbook pro 15" compared to iMac 27".
-
Really urgent: seperation of dates for displaying the stock
hi, I am modifying a report in which i have to display the stock in the following way:- 1.) If P_DATE(15.03.2008) then it should display the stock of previous month as the stock it stored on always on the last date of each month. 2.) If P_DATE(16.03.
-
Firewire connector 400 or 800?
Last summer I bought an iMac intelcore 2 duo, reconditioned by Apple. I have the surprise that the firewire connector doesn't suit to my firewire cable. The firewire connector on the iMac is rectangular, with 4 pins on one side and 2 pins on the othe
-
Need to resize photo to specific size in Photoshop Elements 11
I have a photo that is 1500 x 800 that I want to use in Facebook for the cover photo. The cover photo size is 851 x 315. In PSE Editor / Image / Resize, I change the 1500 to 851 but the height changes to 454. Is there a way to get the height to 351?