Lots of Freeze/Windows Not-Responding Issues

I'm using an MSI Geforce 660Ti
Here's some system specs.
OS: Windows 7 Home Premium 64 bit
GPU Info
DirectX 11
Direct 3d Api Version 11
Graphics Clock 1032Mhz
Memory Data Range 6008 Mhz
Memory Interface 192 Bit
Memory Bandwidth 144.19 Gb/s
Total Available Graphics Memory: 4096 MB
Video Bios Version: 80.06.28.00.39
IRQ 16
Bus PCI Express x 16 Gen 2
Hardware:
Processor: Intel i7-2600 CPU @ 3.4 Ghz 3.70 Ghz
Installed Ram: 8GB
PSU is some generic Coolermaster 950W (Manifest Said Coolermaster but not even sure what it is)
Anyways..I've been experiencing problems with gaming for the last few months or so. I'm not getting system lock ups, reboots, or BSoD's at all. What I am getting is intermittent freeze-ups, and Windows has stopped responding errors on and off. Sometimes while gaming, everything just locks then I see the mouse icon change to the 'busy' image, then it unfreezes and goes back to normal. It also occurs when I login to games, and the graphics are loading. I can hear a very very soft and subtle noise from within the PC. It's a sort of 'click' sound, but it's not a typical 'broken' click-click-click noise. It kind of sounds like the GPU is just trying to 'do' something and whenever it's doing 'that' it makes the sound. I haven't underclocked/overclocked the card at all. I tried to increase the settings just a little to see if it would help. It doesn't seem to be doing much.
I'm guessing the problem is related to the Gpu, Psu, or HDD but I have no idea how to tell. I'm reluctant to bring it into the shop again. The PC came with a GTX 470 about three years ago. After about a year of using it, it started causing me BSoD's, system lock ups/reboots, etc. When I replaced it with this 660Ti all of those problems stopped. This gpu is roughly a year old now and these problems only surfaced within the past 6 months or less. Sometimes when I game I run two clients of the program and I leave games running constantly. I'm not sure if that has anything to do with this.
I've tried running Spybot, and Malwarebytes. Neither have found anything obvious or virus related. A few weeks ago I downgraded from gpu drivers from around March 2014, to some drivers from a year or two ago. I wanted to see if older drivers would add stability at all. They haven't seemed to do much. The graphics load a little slower in games now, and the freezings still occur. As far as computer temperatures, I haven't noticed anything abnormal. Usually the card runs at 30-45C and I've never had a BSoD. Before I downgraded the drivers, I was getting a lot of driver crashes in Aion. It wasn't happening in any other game. (Aion uses Cryengine) Anyways, I'm not sure what to do anymore. I'm reluctant to buy a 3rd gpu because I'm not sure if the GPU is faulty, or if it's my HDD or PSU.

Quote
MSI Geforce 660Ti
May I know the exact model name of 660Ti?
Quote
What I am getting is intermittent freeze-ups, and Windows has stopped responding errors on and off.
You mean when you get intermittent freeze-ups, windows also shows error messages? What kind of message?
Quote
I see the mouse icon change to the 'busy' image
Have you use another mouse to try if it's not because of the mouse?
If you already tried different MSI drivers and they didn't do much, maybe you can try the drivers from NVIDIA website. (Remember to uninstall your MSI driver first)

Similar Messages

  • Itunes 10 update on windows 7 makes it freeze and not respond

    Ever since I updated my itunes to the newest version my itunes will freeze and not respond everytime I open it.
    I use windows 7 and have not add-ons
    any help

    Many thanks.
    That's consistent with an application (other than QuickTime itself) having dropped old QuickTime componentry in your system files.
    So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
    First we'll need to change some view settings.
    In your Start menu, open Computer.
    In your Organise menu, select Folder Options.
    In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
    Click OK.
    Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
    Open the "Windows" folder.
    If you have a 32-bit version of Windows, open the "System32" folder.
    If you have a 64-bit version of Windows, open the "SysWOW64" folder.
    What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

  • Mac Pro wont software update and a lot of apps keep freezing/crashing/not responding

    Mac Pro wont software update and a lot of apps keep freezing/crashing/not responding Im on OSX Lion and i have a Mac Pro 1.1 please help

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click  Log in.
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Safari freezes and not respond, Chrome works great why?

    I just upgraded to Yosemite, and Safari keeps freezing and not responding I have tried everything from removing aches, remove web history but keep freezing. On the other hand, Chrome works fantastic so needs to be something only related with Safari. Apple says Safari goes 6x faster than other web browser, well in my hands in can prepare my lunch and finish it before it opens one page, so 6x faster maybe in Cupertino because not in my laptop. Any suggestions of how to fix the Safari????

    Hi ...
    From your Safari menu bar click Safari > Preferences then select the Privacy tab.
    Click:  Remove All Website Data
    No open a Finder window. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following
    ~/Library/Caches/com.apple.Safari/Cache.db
    Click Go then move the Cache.db file to the Trash.
    Quit and relaunch Safari to test.
    If that didn't help, try troubleshooting extensions.
    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
    If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
    If it's not an extensions issue, try troubleshooting third party plug-ins.
    Back to Safari > Preferences. This time select the Security tab. Deselect:  Allow all other plug-ins. Quit and relaunch Safari to test.
    If that made a difference, instructions for troubleshooting plugins here.

  • User did Not respond issues!! Please help, tried everything...

    Hi,
    I'm having some problems with the whole Audio/Video chat option on Ichat. I'm trying to connect to my girlfriend who also is running on Mac. When we try to connect, it says, "USER NAME, did not respond".
    I've read almost every post on this thing, and seems that the solutions either don't work, or are specific to router/modem setups.
    Now, just as a test to ensure it is from my end, I got my mom... who has an new Intel Imac to connect to my girlfriend, and their video sessions worked fine... so something is wrong with my end for sure.
    I have 2 macs, an Imac and a Macbook pro, and they both experience the same problems, they are running on an Airport Extreme, and our service is through Bell Sympatico, which is a DSL service. I am using a Speed Stream 5200 modem.
    Now both computers are running wirelessly, and I've tried different things like only having one computer connected... hardwiring the computer and even connecting one of the computers directly to the modem... all configurations didn't work. I've also turned off any firewall settings, and unchecked the Distribute IP address option in my airport.
    Personally I believe there is an issue with my ISP or modem, and not sure where to go from here.
    Please if you have any solutions get back to me through this, or through IChat directly my user name is: [email protected]
    Thanks so much
    Kosta

    Dear Stakis,
    You are very welcome. As you might have noticed this discussionforum has been redisigned with profound and intelligent architectural troubleshooting design. I'm sure you will find an answer because all problems are directed towards narrowing down the possible problem and direct you forward to your best way to address your configuration in a way that has the biggest change of successfuley solving your problem. Some peers have been thinking in a very analitical way and almost build a verbal software support applet
    Regarding your trouble. You ran your Ichat behind a router and used the book Pro to host the iChat traffic. I think you should use the iMac to have the router pointforward to as first terminal to regulate iChat traffic. You can use bonjour to have your bookpro chat with the outside world as a network computer using the imac as ichat traffic controller. I noticed you run games on your bookpro . The output you pasted in your reply indicates that your Probook will get in trouble since the code for Xvid is meant for your iMac and your probook needs the universal version.
    QuickTime/XviD_Codec-r58 (ppc).component/Contents/MacOS/XviD.
    IT should be: QuickTime/XviD_Codec-r58 (intel).component/Contents/MacOS/XviD. (not available yet but comming very soon)
    This might cause trouble that destabilises your computer set up and indicates the iMac is the one that is first in line to iChat and your pro is not able.
    Any way you might wonder, what is all this and why this hassle? Basicaly it is something that happened years ago when OSX 10.3.9 was updated to xcode and a simple routine was replaeced by a newer and importand for future addressing compatibility of account/password/id in the future. Apple changed its policy of two account/password/id per user into one. Remember the two different passwords long ago? Well a smart move but badly implented because a lot of developers had the old routine implemented in their personal lybraries and toolkits and did not take notice to replace the old string by the new one wich was paramount to x10.4 account/pas/id addressing. This problem first came to light in mail, there were very strange and inconsistent account and ip malfunctions which where unexplainable at the time. IT took an enormous effort to get a work arround this problem. Especially since it was not analised to the bit. Anyway, this is the cause of suddendeath of iChat inititiation a/v functionality and the did not respond issue. The information to make the connection is inconsistend to the hard/software of the wireless functionality. AIM is also to blame. They chose the easy way out and get the bill now.
    There are some more (not so relevant) issues as time will solve them (quicktime codec h264).
    So please read the new discussionboard trouble shooting pages and i am pretty sure you'll be iChatting (2 way only for now) withing no time thanks to the men who had the patience to allow Apple some time for a fix and kept peers iChatting all over the world with almost individual counseling.
    MacBookPro 17", G4 Powerbook 17" the usual suspects   Mac OS X (10.4.6)   n.e.r.d. debugging devices connected to osx 10.4.6

  • Always facing the "Not Responding" issue while launching the internet explorer 11. I have tried reset in advanced, deleting all cookies, history and all. But no result.

    Always facing the "Not Responding" issue while launching the internet explorer 11. I have tried reset in advanced, deleting all cookies, history and all. Also I did change the default site to https://www.google.com. But no result.
    Some times after some time, able click on new tab and did open any urls. But it is rare. Please help me on this issue. Because of this unable to work with QTP/UFT tool.
    I am getting on top of the screen the below error -
    Error on top the ie screen :
    res:/ieframe.dll/acr_error.htm#google.com,https://www.google.com/ - Internet Explorer (Not Responding)
    I am getting at the bottom of the screen the below error -
    Error at the bottom of the ie screen :
    A problem with this webpage caused Internet Explorer to close and reopen the tab.

    Hi,
    Please refer to the following link to troubleshoot this issue:
    http://msdn.microsoft.com/en-us/library/dn338138.aspx
    Check the browser add-ons
    Check the browser rendering mode
    Then, please also make sure to install latest Windows Updates which might address this issue.
    Update your anti-virus program and perform a security scan incase some virus cause this issue.
    Yolanda Zhu
    TechNet Community Support

  • WHY IS FIREFOX ALWAYS FREEZING AND NOT RESPONDING?

    when i start to use firefox on facebook it works ok for a bit and then it starts not responding or is really slow. i never had any problems with firefox till these latest updates. what could the problem be. it's very frustrating and i have always liked using this until now.
    i have deleted program and reloaded it and have same thing

    WHY IS FIREFOX ALWAYS FREEZING AND NOT RESPONDING?
    i have deleted program and reloaded it and have same thing

  • My Lightroom program keeps freezing and (not responding) what can I do?

    My Lightroom program keeps freezing and (not responding) what can I do?

    What version?
    What operating system?
    When?
    Are you getting any error message?
    Has it ever worked before?

  • Acrobat Standard XI: after opening it freezes adn "not responding message appears.

    Acrobat Standard XI: after opening it freezes and "not responding" message appears.  what is problem and how to fix.

    I had some viruses on the system.  got it cleaned and all is good now.
    On Sat, Nov 1, 2014 at 3:35 AM, Pat Willener <[email protected]>

  • "MCI command handling window" not respond

    im currently running a fresh new Windows XP Pro x64 and X-FI eXtremeMusic. installed cd drivers, then updated to last versions.
    every like 2-3 restarts i get this error window: "MCI command handling window"
    not responding at logoff, waiting for me to "end task".
    I assume it has something to with creative mediasource, but have no idea on how to get rid of it
    I did update mediasource right after the cd installation.
    any suggestions?Message Edited by applejack on 04-30-2006 03:4 AM

    [size="3" color="#330000">I just installed an Sound Blaster X-Fi Fatalty. I removed the old Realtek drivers after disabling the on-board audio in the BIOS. I have an Asus A8N32 socket 939 motherboard.[size="3" color="#330000">?[size="3" color="#330000">I only installed the most recent "web update 4" drivers from the creative site. The card works great but now twice in 48 hours I have gotten the same "MCI command handling window" when the PC has tried to shut down. The shut down hangs until I press "Cancel" and then it shuts down.[size="3" color="#330000">?[size="3" color="#330000">This does not happen all of the time.[size="3" color="#330000">?[size="3" color="#330000">Has anyone else had this problem?[size="3" color="#330000">?[size="3" color="#330000">Any suggestions?[size="3" color="#330000">?[size="3" color="#330000">ThanksMessage Edited by sandchar99 on 04-6-200702:44 PM

  • Lots of programs does not respond, when opened

    Lots of programs does not respond, when they are opened, Apple store, Mail, Photo Booth and VideoConverterPro and some moor.
    To close, I have to click on finder first. What to do ?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Itunes Freezing, PC not responding, no internet windows not shutting ETC.

    Problem with ITunes freezing up when you sync or not, can't use the internet or your home networking features, and windows not shutting down correctly or restarting: This is what I found and seemed to work for me. ITunes installs a service called Bonjour that basically is used for networking things like apple TV and remote speaker systems and other people on your home network to be able to use one main iTunes library for another pc (however you can not sync that content so its pretty much useless) unless you need it for apple TV or remote speakers. If you don't use those things then it is best to disable and stop bonjour from running at all. After you disable this service you will then have to delete the default gateway 0.0.0.0 that bonjour creates but doesn't delete, this is what is messing everything up. Seems that bonjour service opens this gateway over your routers gateway which seems to create all kinds of problems when there are two gateways. Sounds like one or two of the programs keeps looking for pc's or networks to connect to.
    First, here are some articles that I found that made the most sense:
    http://techgenie.com/latest/how-to-resolve-security-issues-while-using-apple%E2% 80%99s-bonjour-service/
    http://support.microsoft.com/kb/970313
    This is an article I found for completely removing bonjour, seemed a little drastic so I didn't try this:
    http://www.techsupport.me.uk/2009/03/26/how-to-remove-or-uninstall-bonjour-mdnsr esponder-exe/
    Here is how I fixed this problem in vista but should work the same for other windows operating systems:
    You may have to get windows permission or get administrative permission for any of these steps click ok or yes for all.
    1. On your desktop right click on taskbar and click on task manager.
    2. When task manager comes up, at the top tabs find and click on services.
    3. Find bonjour service and highlight it.
    4. Down at the bottom to the right click on services another window will pop up.
    5. Find bonjour service highlight it.
    6. Right click and then click on properties another window will pop up.
    7. On the general tab in about the middle of the window you will see a (startup type) drop down menu, open that up and click disable.
    8. Below that you will see service status click the stop button.
    9. Click the apply button in the lower right corner and click OK.
    10. In the previous windows, the service window and task manager service tab window bonjour service should read disabled or stopped, but you might have to restart your PC to see this, DON'T DO THAT YET.
    11. Close all open windows click Start button and type cmd in the Start Search box.
    12. Right-click cmd.exe in the Programs list, and then click Run as administrator (if you are prompted for an administrator password or for confirmation, type the password or provide confirmation)
    13. At the command prompt, type the following command, route delete 0.0.0.0 and then press ENTER:
    Just so we are clear this is the command: route delete 0.0.0.0
    14. Close the command prompt window and restart your pc and try ITunes and see what happens also just to be sure fallow steps 1 through 9 to see if bonjour was stopped and disabled from running. This should fix those issues, If not you may need a complete uninstall of all ITunes products and a clean install ( make sure you back up your libraries and all your files you use with ITunes before you do this) Here is a link to explain how to do this below.
    http://support.apple.com/kb/ht1925
    Hope this works for anybody having this problem, fallow all steps exactly.
    This is all based on a week of research, trail and error and what worked the best for me, try at your own risk.

    Problem with ITunes freezing up when you sync or not, can't use the internet or your home networking features, and windows not shutting down correctly or restarting: This is what I found and seemed to work for me. ITunes installs a service called Bonjour that basically is used for networking things like apple TV and remote speaker systems and other people on your home network to be able to use one main iTunes library for another pc (however you can not sync that content so its pretty much useless) unless you need it for apple TV or remote speakers. If you don't use those things then it is best to disable and stop bonjour from running at all. After you disable this service you will then have to delete the default gateway 0.0.0.0 that bonjour creates but doesn't delete, this is what is messing everything up. Seems that bonjour service opens this gateway over your routers gateway which seems to create all kinds of problems when there are two gateways. Sounds like one or two of the programs keeps looking for pc's or networks to connect to.
    First, here are some articles that I found that made the most sense:
    http://techgenie.com/latest/how-to-resolve-security-issues-while-using-apple%E2% 80%99s-bonjour-service/
    http://support.microsoft.com/kb/970313
    This is an article I found for completely removing bonjour, seemed a little drastic so I didn't try this:
    http://www.techsupport.me.uk/2009/03/26/how-to-remove-or-uninstall-bonjour-mdnsr esponder-exe/
    Here is how I fixed this problem in vista but should work the same for other windows operating systems:
    You may have to get windows permission or get administrative permission for any of these steps click ok or yes for all.
    1. On your desktop right click on taskbar and click on task manager.
    2. When task manager comes up, at the top tabs find and click on services.
    3. Find bonjour service and highlight it.
    4. Down at the bottom to the right click on services another window will pop up.
    5. Find bonjour service highlight it.
    6. Right click and then click on properties another window will pop up.
    7. On the general tab in about the middle of the window you will see a (startup type) drop down menu, open that up and click disable.
    8. Below that you will see service status click the stop button.
    9. Click the apply button in the lower right corner and click OK.
    10. In the previous windows, the service window and task manager service tab window bonjour service should read disabled or stopped, but you might have to restart your PC to see this, DON'T DO THAT YET.
    11. Close all open windows click Start button and type cmd in the Start Search box.
    12. Right-click cmd.exe in the Programs list, and then click Run as administrator (if you are prompted for an administrator password or for confirmation, type the password or provide confirmation)
    13. At the command prompt, type the following command, route delete 0.0.0.0 and then press ENTER:
    Just so we are clear this is the command: route delete 0.0.0.0
    14. Close the command prompt window and restart your pc and try ITunes and see what happens also just to be sure fallow steps 1 through 9 to see if bonjour was stopped and disabled from running. This should fix those issues, If not you may need a complete uninstall of all ITunes products and a clean install ( make sure you back up your libraries and all your files you use with ITunes before you do this) Here is a link to explain how to do this below.
    http://support.apple.com/kb/ht1925
    Hope this works for anybody having this problem, fallow all steps exactly.
    This is all based on a week of research, trail and error and what worked the best for me, try at your own risk.

  • Illustrator CC 64-bit release 2014.1.0 keeps freezing and "not responding" on windows 8.1

    Every time I return focus to the app it freezes and the app says "not responding".  It starts to work in about 10 seconds. Also, while I'm in the app it will do the same thing, especially it seems when I click in a panel. It seems to help if I go off-line so I'm thinking it is going online to check something perhaps?
    Please help, Illustrator is practically unusable at this point.
    Thanks,
    Nigel

    Nigel,
    You may try this Extensions Suitcase 5 update:
    http://www.extensis.com/support/product-support/suitcase-fusion-5/
    Direct update link:
    http://bin.extensis.com/SuitcaseFusion5-M-16-2-5.zip
    It was suggested in a somewhat similar case recently, but is still untested.
    Illustrator freezes upon sleep

  • How to fix my firefox' s constant "not responding" issues?

    Here's the deal. About last week, My firefox browser encountered some problems. Everytime I opened it, loading time was really long and when I opened a new tab either to open google search or to open another website, it didn't respond at all for about 30 secs or more. That was why I reinstalled firefox to see if it, hopefully, could be different somehow. Unfortunately, the problems now are not so different from what I have described, only now it's got a bit worse with the constant "not responding" and "freezing" in every tab I open - more or less than 30s PER TAB. I thought there was something wrong with my hardware or some features on my laptop, yet my google chrome still works. How does it still work? NO IDEA! But whenever my firefox freezes when I click on some links or a new tab, I turn over to GC and it still works really well so far. But I would prefer firefox to GC as my default browser since I'm more used to using it and a few features on it work better on the latter. So I would be really grateful if these issues are dealt with as soon and effectively possible. Thanks a lot :)

    The "not responding" problem just started today. I removed and re-installed firefox. I disabled ALL the add-ins and the problem remains. I've been using Firefox for years probably starting with version 2. I guess this is the end of the line for me. Chrome is more popular so that's where I'm going. Bye...
    Unfortunately I'm going to miss some of the great add-ins and the so easy to use bookmark system but I need a browser that works All the time. Bye, Bye..

  • Acrobat DC freezing or "not responding"

    I recently installed Acrobat DC.  I previously used Foxit Phantom.  Now when I am in "My Computer" and I either mouse-over or try to open a PDF file, it freezes for about 10 seconds and says "not responding" at the top.  It always works again after the 7-10 seconds.  Very annoying.  This never happened when using Foxit.  Has anyone else had this problem?  How do I fix it? 

    Hi Scott2116,
    I am sorry that you are experiencing this issue & will be happy to assist you.
    Can you please let me know the version of operating system installed on your computer in order to diagnose the issue correctly?
    In the mean time please refer to this KB doc. Troubleshoot system errors, freezes | Windows | Adobe software to check the system requirements & other troubleshooting steps. 
    Regards,
    Aadesh

Maybe you are looking for

  • Master Detail Report for PDF Printing

    Dear All,        While trying to create a master detail report using Oracle APEX 4.2 and BI Publisher. I tried creating report queries and report layout following the below mentioned steps. CREATE TYPE emp_row AS OBJECT (   EMPNO NUMBER(4),   ENAME V

  • How to handle UMLAUT characters in oracle reports 10g

    Hi All, we are facing issues while developing the report in 10g. There are few hardcoded values which have ä in it. We register these reports into Oracle Applications R12.  The report gets completed normal. But in the report output it displays as ö

  • CC updates always fail? Need help.

    Hello all, I have CC and a prompt to update Premiere Pro and Photoshop two programs I use frequently. Recently, however, I have been unable to open either because I have yet to install the updates. Problem: each time I try to install the updates they

  • Another problem:  query in oracle

    Hello guys, I have a problem in a SQL code in a program that uses a Oracle connection. The code: public class ConBol {      public void getDataBol() {           String sql = "SELECT * FROM DOCUMENT_FISC  WHERE NRDOC_FISC = ?";           try {        

  • HT1369 iPod Shuffle, What to do?

    Hi, Have a new Shuffle and can not sync to the computer.  It reads no iPod found in diagnostics check.  USB ports are working fine and connections, also shows devices listed under my computer.  Please help.. Thanks