Lots of hosted domains

If I'm reading the documentation correctly, in order to support hosted domains (where the user's JID is [email protected] and the connect server is connect.domain.org) I have to install a server instance for each sub.domain.org.
We have over 400 domains, and this seems a bit cumbersome (I'm thinking that I will have to write a script that searches LDAP for new domains and creates an IM instance.) Is there any plan to allow this to be configured in LDAP?
Is there anything I can change in iim.conf to skirt this process? Perhaps change the 'loginfilter' and 'useruidattr' settings?

Hi,
IM server supports multiple domains out of the box only when the deployment makes use of Access Manager as the backend.
But it is always possible to write custom Realm's which implement the functionality required by making use of the com.sun.im.provider.* api.
(Like com.sun.im.provider.MultiDomainRealm, etc).
If it is not using Identity server as the backend, and if you want to leverage the bundled Realm (*) implementations - then you would need to set up different deployments each for a single domain with the appropriate searchbase configured ...
(*) Bundled Realm's are : A single searchbase based ldap tree, Access Manager based Realm (so nested/multiple trees).
Regards,
Mridul

Similar Messages

  • Host+Domain Name+Shopping Cart Package

    Ok so I am going to create a small business website with not a lot of traffic. I am banking on iWeb 2 to release in January with HTML support so adding features like a shopping cart will be easier...but until then I have some questions.
    Ok lets say my site is completed with about 10-15 pages.
    I want to host other than .Mac...
    -I decide to host with godaddy.com or something else
    -Now I want my own domain name with total masking. I don't want to see any .Mac or iweb stuff in the site domain. So I is that easy with godaddy?
    Now the BIG question...
    I want to sell several products on my site...assuming I now have iWeb 2 and it has HTML support, this shouldn't be that hard.
    -Do I get the cart for $27 a month with Go Daddy or another host? Will that give me a totally incorporated cart bult into my website? Will is just give me HTML code to paste into iWeb?
    -I would prefer an incorporated shopping cart compared to paypals free, external shopping cart.
    Also, I would need a merchant account with godaddy, and who would work as the gateway for credit card payments?
    Basically, once i have my site made, assuming iWeb 2 has HTML support, I just want to have a shoppig cart package that allows me to paste their HTML into iWeb and get a shopping cart that is totally internal to my site. I also want the merchant account and the whole gateway package to accept credit cards.
    Any suggestions on the steps I should take on deciding the best host, domain masking feature, and shopping cart path I want???

    Ok, It looks like GoDaddy and Verio both offer shopping cart features, but they are external...meaning you use their online software to create basically your own "Online Store". So I would link my iWeb site to this store...but they would look tottally different. Some thing with Verio.com
    https://www.godaddy.com/gdshop/ecommerce/cart.asp?se=%2B&ci=278
    What is the best solution for a shopping cart that uses HTML to paste into your existing website???

  • Hyper-V Guest Cannot Find Host Domain Controller 2012 R2

    Poweredge T320 server as a Domain Controller,  file server and an EXCHANGE 2010 server. There are no other servers at the site. 
    DHCP is from the firewall.   The DC and the file server will be on the host. 
    The 2010 EXCHANGE server will be on the guest.  The Hyper-V 
    2012 R2 server cannot see the Domain Controller on the host 2012 R2 server. 
    The Active Directory is requesting to be promoted to a Domain Controller.  
    I have a logical or physical error in the installation. 
    It is asking to promote the  Hyper-V guest 2012 R2 to a Domain Controller. 
    I believe I should have only one  Domain Controller in this application.  
    After the Hyper-V guest can see the host domain controller I will install EXCHANGE 2010.
    This is a test environment, offsite.
    NIC1 – Host IP:192.168.1.130, 255.255.255.0, Gateway:192.168.1.1, DNS:127.0.0.1
    NIC2- Only Hyper-V switch checked
    Virtual Switch: 192.168.1.140, 255.255.255.0, Gateway: Blank, DNS: Was 127.0.0.1 didn’t work so I pointed it to the host, 192.168.1.130, but that didn’t work either.
    Host adapter: IP:192.168.1.150, 255.255.255.0, 192.168.1.1, DNS Pointing to HOST:162.168.1.130
    Active Directory and DNS installed on the guest.
    Removed IPv6 from both NICs without any change.
    IPAM is not installed on the host or the guest.
    Several articles in Internet search didn’t help.
    Thanks for your help.

    Hi Steve,
    I suggest referring to the following links:
    REMOTEFX, WINDOWS SERVER & HYPER-V SERVER
    http://blogs.technet.com/b/puneetvig/archive/2011/04/21/remotefx-windows-server-amp-hyper-v-server.aspx
    RemoteFX (with Hyper-V) is a serious business tool. For games.
    http://blogs.technet.com/b/tristank/archive/2012/02/17/remotefx-with-hyper-v-is-a-serious-business-tool-for-games.aspx
    Best Regards,
    Vincent Wu
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Error (2931) VMM is unable to complete the request. The connection to the VMM agent on the virtualization server (host.domain.local) was lost.

    Experts,
    kindly advice for this error when create vm from a templates, while i'm not having this issue when create the vm to another host from the same templates,
    firewall is disabled and no antivirus on the host.
    The network and the ping is very stable, and the WS-Management service is running on the host,
    Host  : windows server 2012 R2
    VMM : 2012 R2 3.2.7895.0
    VMM updated from RU2 to RU5
    Error (2931)
    VMM is unable to complete the request. The connection to the VMM agent on the virtualization server (host.domain.local) was lost.
    Unknown error (0x80338029)
    Recommended Action
    Ensure that the Windows Remote Management (WS-Management) service and the VMM agent are installed and running and that a firewall is not blocking HTTPS traffic.
    This can also happen due to DNS issues. Try and see if the server (ms-lab-01.eccsolutions.local) is reachable over the network and can be looked up in DNS. You can ping the virtualization server from VMM management server and make sure that the
    IP address returned matches the IP address locally obtained from the virtualization server.
    If the error still persists, restart the virtualization server, and then try the operation again.
    Ahmad Samir | MCSE 2003, MCSE 2012 Private Cloud | MCTS: SCOM 2007, Lync 2010, Exchange 2010.

    Ok  I will try another template,
    and the drop happen in the customization after deploying the VHDX file as my first image.
    I had this answer from partner forum. but i didn't try it yet
    Backup your VMM database and then check the
    tbl_VMM_Lock table in the
    VMM database to see if it has any locks listed, do this after stopping the System Center Virtual Machine Manager Service.
    If there are locks listed in the tbl_VMM_Lock
    table you can clear them by executing the prc_VMM_ReleaseAllLocks
    stored procedure.
    Ahmad Samir | MCSE 2003, MCSE 2012 Private Cloud | MCTS: SCOM 2007, Lync 2010, Exchange 2010, Server Virtualization.

  • IChat second Host Domain not working

    Hi
    I'm running ichat server with a local network hostname, and it works great. We have some people outside our network that want to access it too, so the server has a public ip and dns name. I added the outside dns name to the iChat Host Domains list hoping it would just work, but to no avail.
    I see these log message when I try to connect to the other domain:
    Mar 16 09:43:09 server jabberd/c2s[20709]: [39] [::ffff:10.100.192.30, port=2939] connect
    Mar 16 09:43:09 server jabberd/c2s[20709]: SASL callback for non-existing host: myoutsidedomain.com
    Mar 16 09:43:09 mac-server jabberd/c2s[20709]: [39] [::ffff:10.100.192.30, port=2939] disconnect jid=unbound, packets: 0
    the actual hostname is jabber.myoutsidedomain.com, the log just complains about myoutsidedomain.com.
    here is output from serveradmin settings jabber:
    jabber:s2sRestrictDomains = no
    jabber:authLevel = "ANYMETHOD"
    jabber:savedChatsLocation = "/var/jabberd/message_archives"
    jabber:dataLocation = ""
    jabber:enableAutoBuddy = yes
    jabber:enableXMPP = yes
    jabber:initialized = yes
    jabber:logLevel = "ALL"
    jabber:requireSecureS2S = no
    jabber:serviceMode = "CHATSERVER"
    jabber:savedChatsArchiveInterval = 7
    jabber:jabberdDatabasePath = "/private/var/jabberd/sqlite/jabberd2.db"
    jabber:hosts:arrayindex:0 = "server.mylocaldomain.com"
    jabber:hosts:arrayindex:1 = "jabber.myoutsidedomain.com"
    jabber:eventLogArchiveInterval = 7
    jabber:enableSavedChats = no
    jabber:s2sAllowedDomains = emptyarray
    Can anyone help me get this working?

    Hello,
    You will need to ensure that that hostname myoutsidedomain.com also needs to resolve internally.
    I trust that makes sense.
    Tim

  • Illegal host/domain name found

    Hi, i hit some error when reply mail to a mail account which is valid:
    16-Mar-2006 16:11:26.98 tcp_local R 104 [email protected] rfc822;[email protected] [email protected] Illegal host/domain name found (TCP active open: Failed gethostbyname() on misty.sgx.com.my, resolver errno = 1)
    from nslookup:
    santomas.com.myServer: ns1.jaring.my
    Address: 161.142.201.17
    Non-authoritative answer:
    Name: santomas.com.my
    Address: 202.189.48.236
    I'm not an expert on DNS, what cause this error? This domain with the account is valid.
    Will "nomx" keyword put in under tcp_local in imta.cnf will solve ?

    also:
    set type=mx
    santomas.com.myServer: ns1.jaring.my
    Address: 161.142.201.17
    santomas.com.my preference = 20, mail exchanger = meia.sgx.com.my
    santomas.com.my preference = 30, mail exchanger = misty.sgx.com.my
    santomas.com.my nameserver = ns1.nameserversecure.com
    santomas.com.my nameserver = ns2.nameserversecure.com
    ns1.nameserversecure.com internet address = 202.189.48.238
    ns2.nameserversecure.com internet address = 202.189.48.239
    there is not "nomx" keyword under tcp_local or default.....
    Messaging Server 6.2

  • IM not working with hosted domains

    My IM working with default domain within portal and from jnlp site but with my hosted domains is not signing in. I have IMS 7.1 (patched) Sun JES 2005Q4
    It dont even generate any log for hosted domains.
    IM log set at DEBUG level.
    Does IM 7 support hosted / virtual domains in only one IM instance (single install)

    I dont know much about it because there is no log fot failure logins. It simply working with default domain but not for any hosted domain. I also followed following.
    * cd /opt/SUNWiim/html/en/
    #vi im.jnlp
    Add the following in the im.jnlp just above the </resource> tag
    <property name="com.iplanet.im.client.allowarobase" value="true" />
    * Redeploy im resources into the web-container with recent changes
    * Now launch the client from http://<hostname>:<webport>/im/en/im.jnlp
    and then login as [email protected]
    How do i Redeploy im resources into the web-container with recent changes

  • How do you change Host Domain in Grid Control (OMS)

    Background:
    Grid control is all installed on one server (AGENT, REPOSITORY, and OMS).
    Beside reintalling Grid Control, is there another method of changing the host domain in OMS?

    Recreate the Grid Control repository, update required config files.

  • I am seeing errors like:Status: 5.4.4 (Illegal host/domain name found). Almost all destinations have no A records, only MX records. The user can usually resend the message and it works.  Any ideas?

    I do have MX in tcp_local in imta.cnf

    The problem is not in the mail software, the problem is in your DNS system. 554 is a permenant failure which means that the MTA got an authoritative response from DNS reporting that the host/domain did not exist.
    When the user tries again, the MTA queries again, and this time DNS responds with a positive response.
    First see the NMS tuning guide and enable nscd, it might be related, not sure, can't hurt, will improve performance.
    Your DNS server should be waiting until it gets a positive/negative response from the root servers. Sounds like that is not happening, maybe a timeout kicking in and causing it to return a authoritative answer (which is incorrect) and then on a subsequent query the response made it and thus the lookup works.

  • FAILED  nslookup host.domain

    I am performing an R12.2 Vision Installation on SLES 11 SP3 for VMWARE.
    Reference RDA - Health Check / Validation Engine Guide (Doc ID 250262.1)
    I executed the " ./rda.sh -T hcve " check to perform the Oracle E-Business Suite Release 12 (12.2.0) Preinstall (Linux x86_64).
    I receive this failure:   " A03550 DNS Lookup           FAILED  nslookup host.domain "
    Can you help direct me to why I may be receiving this error?
    more  /etc/hosts  ------My etc hosts I believe is setup correctly.
    # IP-Address   Full-Qualified-Hostname Short-Hostname#
    127.0.0.1 localhost.localdomain localhost
    192.168.0.121 Platinium2.platinumesol.com Platinium2
    Platinium2:~ # ping Platinium2     -----Ping resolves correctly to what is in /etc/hosts
    PING Platinium2.platinumesol.com (192.168.0.121) 56(84) bytes of data.----This is the correct IP
    64 bytes from Platinium2.platinumesol.com (192.168.0.121): icmp_seq=1 ttl=64 time=0.024 ms>
    When I do an nslookup of the host server that I am working on :
    Platinium2:/pwoll/rda # nslookup Platinum
    Server:         209.18.47.61
    Address:        209.18.47.61#53
    Non-authoritative answer:
    Name:   Platinum
    Address: 198.105.254.240
    Name:   Platinum
    Address: 198.105.244.240
    Platinium2:~ # nslookup -d2
    setup_system()
    create_search_list()
    ndots is 1.
    copy_server_list()
    make_server(209.18.47.61)
    make_server(209.18.47.62)
    make_server(192.168.0.1)
    >
    cat /etc/resolv.conf
    search platinumesol.com
    nameserver 209.18.47.61
    nameserver 209.18.47.62
    nameserver 192.168.0.1
    options attempts:5
    options timeout:15
    Paul

    Hi there
    You are executing this:
    Platinium2:/pwoll/rda # nslookup Platinum
    and you are trying to reach the Platinum2
    On the other hand, Just to be sure is your DNS working correctly ?
    Regards

  • Z10 faulty code BUG - emails may not be sent/released if you have a hosted domain with email accounts

    let me preface this by saying I have been a loyal blackberry user, screaming from my soapbox about blackberry for many many years and that I am not a techie and really wish blackberry all the best.
    however, today my blackberry faith has been completely crushed and i don't want anyone to go through this pain.
    I just confirmed  that the z10 in it's current OS and the way in which email is formatted does not meet certain code requirements CRLF RFC ??  As such any emails routed through to a hosting provider will likely be blocked from leaving their servers. It has to do with headers, date stamps and formatting of the emails as read by spam blockers as they apprear from the blackberry OS
    what happened to me is that emails showed as sent, and then i was wondering why i never head back from clients. Bingo. they never got it. 
    After extensive phone calls, testing accounts with BB, hosting domain and Rogers, it became clear this was a z10 issue.
    So any small business owners that use large hosting providers that have strict spam and code requirements BEWARE. In all liklihood you will experience great difficulties in emailing anyone (read they won't get them).
    Gmail and hotmail work fine.
    Before you mention them...STMP and SSL and ports do not make a difference in my case. This has been confirmed. Trust me.
    Is it a nice device? Yes.  Does it have potential? yes.  Does it meet my  most basic email needs? NO
    to top it all off, i just extended my contract to get this phone. If I'm lucky, from the sounds of it, it might work after two future OS updates.
    I am flabbergasted by this huge oversight and really do wish blackberry well, but if this doesn't get fixed when they get U.S. customers...I think they are going to be TORN apart.
    Blackberry are you listening?
    Feel free to send me some sort of love or compensation for my previous years of devout loyalty, my being trapped in a contract in your name and for bringing this issue to your attention.
    signed
    heart broken with a shiny new useless z10 which apparently can't return now. 

    Hi there, so when I was speaking with bb I was told that this fix would not make it into the update.  I have no reason to believe that this issue is resolved as the update rolled out shortly after my lengthy discussion so by then I assume the update was already with the carriers for review.
    Perhaps you can raise this issue with them again and give them a test account to see what they can do. I know how much this sucks and this needs to be escalated continuously to make it into the next updates. 
    Also see if your hosting provider can help by whitelisting your domain and turn off spam blockers.
    Wish you well 

  • How to make push work with a google hosted domain?

    I can find no instructions on it through google, i've posted through google groups and gotten no answer. Using the instructions to setup google as exchange works great for my personal mail but it doesn't work for my hosted domain simply by substituting my hosted domain email. The only way I can get my hosted domain to work is by setting it up as a regular gmail account. The phone only allows one exchange push account and I would much rather have my hosted domain (work) as the push account and hte personal as the one that refreshes every 15 minutes.
    how can I get this to work?
    Thanks.

    The Sony Ericsson W580i is supported using an iSync Plugin from here.
    Be careful that you choose the correct phone, as you wrote W580i in your subject, but W850i in your message!
    Julian
    Aluminium 20" iMac 2.4Ghz, 2GB RAM Mac OS X (10.5.2)
    Apple Required Disclaimer: "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • Rapidwiz fails host/domain check

    Hello all,
    I started rapidwiz to install R12.1 on windows 2003.
    He did al the checks, but fails on the check off host/domain.
    The following error occurs:
    Host/Domain
    command: ping -n 1 incoredemo
    Pinging IncoreDemo [172.30.26.159] with 32 bytes of data:
    Reply from 172.30.26.159: bytes=32 time<1ms TTL=128
    Ping statistics for 172.30.26.159:
    Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    host ping has succeeded
    command: ping -n 1 incoredemo.officevision
    Ping request could not find host incoredemo.officevision. Please check the name and try again.
    RW-50011: Error: - host.domain ping has returned an error: 1 System variable PATH set to:
    C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\cygwin\bin;c:\Program Files\Microsoft SQL Server\90\Tools\binn\
    So I guess the domain name is not correct.. But I am even not in a domain, I am in a workgroup, which is called officevision.
    Can anyone tell me what I can use for domain???
    Or can I just continue?
    Thanks in advance!
    Remc0

    Hi,
    command: ping -n 1 incoredemo.officevision
    Ping request could not find host incoredemo.officevision. Please check the name and try again.
    RW-50011: Error: - host.domain ping has returned an error: 1 System variable PATH set to:
    C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\cygwin\bin;c:\Program Files\Microsoft SQL Server\90\Tools\binn\Make sure you have valid entry in the hosts file.
    So I guess the domain name is not correct.. But I am even not in a domain, I am in a workgroup, which is called officevision.
    Can anyone tell me what I can use for domain???
    Or can I just continue?Set the domain name as follows:
    - Right click on 'My Computer' > Properties > 'Computer Name' > Change
    - Set 'Computer Name' to <hostname>
    - Click on More
    - Set a 'Primary DNS Suffix of this Computer' to <domainname>
    Regards,
    Hussein

  • Problem POP with SSL for hosted domain !

    Hi Sun!
    With default domain, i can use POP with SSL but for hosted domain, I can't use POP with SSL and received a message +-ERR [AUTH] Authentication failed!+
    In file PopProxyAService.cfg on MMP server, I uncomment line default:HostedDomains yes but it's not work
    Please help me solve this problem!
    ./imsimta version
    Sun Java(tm) System Messaging Server 7u2-7.02 64bit (built Apr 16 2009)
    libimta.so 7u2-7.02 64bit (built 02:28:03, Apr 16 2009)
    Using /opt/sun/comms/messaging64/config/imta.cnf (compiled)
    SunOS SMSG 5.10 Generic_138889-08 i86pc i386 i86pc
    Thanks!

    I have found problem!
    Hosted domain that can not be used IMAPs and POPs because I have moved from other mail systems
    When I created another account on this hosted domain, this user can use POPs and IMAPs normal. But old users can't use POPs IMAPs
    I don't know why old users can't use POPs and IMAPs ?
    Error log in front-end MMP:
    [07/Apr/2010:08:37:15 +0700] SMSG PopProxy[8284]: General Notice: (id 1943) User [email protected] user access denied
    [07/Apr/2010:08:37:15 +0700] SMSG PopProxy[8284]: General Notice: (id 1943) badguy xx.xx.xx.xx now has 3 badness
    [07/Apr/2010:08:37:18 +0700] SMSG PopProxy[8284]: General Error: (id 1943) client socket IO error: Error 0 (0)

  • SSL email on Dreamhost hosted domain?

    Has anyone gotten SSL email to work on a Dreamhost hosted domain?
    I keep getting the infamous SSL clock error that has nothing to do with the clock.  I am not running Exchange Server and I have loaded the cert for *.mail.dreamhost.com onto my pre to no avail.
    Obviously my email domain is not the same as the cert domain, and this appears to be the root of the problem.  Using the dreamhost addressed mail servers or my own domain mail servers makes no difference.  I can receive and send via ports 110 and 25 only on the Pre.  SSL ports work fine on the PC.
    Thanks,
    -K
    Post relates to: Pre p100eww (Sprint)

    I just got this working today.
    It seems like you're most of the way there, since you've already installed Dreamhost's certificate (I'm leaving a link to Dreamhost's support wiki about this for anyone that may follow:  http://wiki.dreamhost.com/NDN_Certificate).
    You've likely also seen Dreamhost's posting regarding the 'Certificate Domain Mismatch Error' (http://wiki.dreamhost.com/Certificate_Domain_Mismatch_Error). I tried a few things here, but the crucial step was to find out which Dreamhost mail server my domain uses. I found that information by logging on to my Dreamhost web panel and going to Mail > Custom MX/Gmail. Scrolling all the way down showed me something that looked like this: 
    Dreamhost MX Records
    mx1.balanced.frisky.mail.dreamhost.com
    mx2.balanced.frisky.mail.dreamhost.com
    Your information may end up looking a little different, as Dreamhost uses several different server names that may stand in for 'frisky' above.
    So, for my incoming and outgoing mailserver, I entered: 
    frisky.mail.dreamhost.com
    And everything started working from there. I tested send and receive several times, and I've been getting mail all day.
    I'm using SSL on port 993 for incoming mail, and TLS on port 587 for outgoing (yeah, it's odd, but it works, so I'm not going to mess with it).
    Good Luck!

Maybe you are looking for

  • ITunes Can't locate most music files

    I updated iTunes and it can't locate most of my music. I'd say only about 10% and that being the most recent stuff I added is all it can locate... it asks me to look for the file and I point it exactly to where it should be. I searched around and som

  • Insert new rows based on user selection on a table display on the screen

    Hi.. In my requirement i need to display the line items of a PO# to the user on the screen for specific fields. Each row should also include an additonal checkbox when displayed for the user. When the user checks this check box or clicks on it a new

  • End User - ESS Timesheet Display Issue

    Hi All, Hopefully I have posted this in the correct forum. I tried to search of the issue I have for an end user but had no success, so I thought since my post graduate study surrounds ERP systems and work with SAP every day, I though it was best to

  • File sharing between macs oddly not working

    I'm trying to share folders between two macs running Lion (at work so sharing is important) but the one computer doesn't connect. The problem. Mac1 is set up to share and appears in the shared list on Mac2. When Mac2 tries to connect to Mac1, I have

  • Stop automatically opening pdf in ipad

    When I look at my emails on my iPad some pdf attachments are already open on the page. Some pdf's I like to open in iBooks so a copy is kept. How can I do that when the pdf is opening and showing within the email?