Lots of issues since installing a new apple keyboard

Since I purchased a new a apple keyboard (the new wired flat ones) I have had nothing but issues with any USB devices plugged in.
Specifically my Belkin hub which prior was perfect now has all sorts of issues.
Trying to import images on a card reader often results in the 'device being removed' even though it was not.
The 'ALT" key does not work on start up to choose which operating system to boot into
When launching windows it will often not launch until the keyboard is removed.
Other random funky behavior such as the mouse doing its own left clicks many times over and over
Sometimes when starting up clicking an application in the dock just opens its location in a finder window.
All this started when putting this keyboard on, and all stops when I take it out and go back to my apple wireless one.
Do I have a duff one, or does anyone experience this?

First contact your ISP. You need to confirm that the issue is not on their end.
Change your router channel. Sometimes this is all you will have to do.
Power cycling the router. Read the router's user manual or contact their tech support for instructions.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
Other resources to check into:
Configuring 802.1X in Mac OS X Lion and Later
Non-responsive DNS server or invalid DNS configuration can cause long delay before webpages load
Netspot
How to diagnose and resolve Wi-Fi slow-downs
Pv6 troubleshooting
OS X Mountain Lion: Check the status of your network connections
OS X Mountain Lion: Requirements for wireless Internet access
What Affects Wireless Internet?
Solutions for connecting to the Internet, setting up a small network, and troubleshooting
If using one of Apple's Airport routers, read its user manual or post in its forum area. If using a 3rd party router, read its user manual, contact their tech support department/website or post in its forum area.

Similar Messages

New Apple Keyboard and iPhoto 08.

It seems that when you install the new Apple Keyboard and download and install the Apple Keyboard update ver 1.1, it breaks iPhoto 08. What I am saying is that it will not let you rename any of your events! I installed it on my MacPro and it happened, then I went to my MacBook and installed the keyboard and the update and the same thing happened!
Anyone else having this problem?

The Fix!
Go to the Finder, go to Macintosh HD, go to the folder called Library, go to the folder called Caches, look for a folder called com.apple.ATS usually the first folder, drag it to the trash. The computer will then ask you for your password and then restart your computer and all wii be fixed!

Since installing a new router my mac wont remember it

Since installing my new WD N900 router last week, my mac wont remember my setting when i close the lid or turn the mac off. All my other apple prodcts remember the router. Iphone,Ipad and apple tv. So I know it not the router. I previously used the standard TalkTalk Cable router and everything worked fine.
what I have to do is click on the WI-FI symbol and pick my router from the list each time.
Plese help guys as it a really annoying process.

First contact your ISP. You need to confirm that the issue is not on their end.
Change your router channel. Sometimes this is all you will have to do.
Power cycling the router. Read the router's user manual or contact their tech support for instructions.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
Other resources to check into:
Configuring 802.1X in Mac OS X Lion and Later
Non-responsive DNS server or invalid DNS configuration can cause long delay before webpages load
Netspot
How to diagnose and resolve Wi-Fi slow-downs
Pv6 troubleshooting
OS X Mountain Lion: Check the status of your network connections
OS X Mountain Lion: Requirements for wireless Internet access
What Affects Wireless Internet?
Solutions for connecting to the Internet, setting up a small network, and troubleshooting
If using one of Apple's Airport routers, read its user manual or post in its forum area. If using a 3rd party router, read its user manual, contact their tech support department/website or post in its forum area.

I installed my new Apple TV and successfully completed the configuration (Wireless network, Apple ID, and others) yet I am always in the Computers and Setting page- can't move to the main page – any idea on what and how, please?

Hello, I installed my new Apple TV and successfully completed the configuration (Wireless network, Apple ID, and others) yet I am always in the Computers and Setting page… can’t move to the main page – any idea on what and how, please?

Welcome to the Apple Community.
Unfortunately, a number of users appear to have encountered this problem. Some of these users have reported that the problem just disappears the following day or shortly after. Other users have found various other solutions to this problem.
Firstly, are you receiving any date and time errors when you turn on your Apple TV?
Check that you are properly connected to the Internet, by ensuring that you have a proper IP address and not one starting with 169. Also check that your location for the iTunes Store is set correctly, if so you might try changing it and then changing it back.
If the problem persists try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general. You should also try restarting your router, or if this doesn't work you might like to try a restore.

When trying to log in with my primary Apple ID and password, I am continuously asked for my pass word without being able to log in. How can I solve this issue, without creating a new Apple ID?

When trying to log in with my primary Apple ID and password, I am continuously asked for my pass word without being able to log in. How can I solve this issue, without creating a new Apple ID?

Chewning wrote:
I saved some of my music to a Cloud I can't access. Now, they show up as "Purchased" in iTunes, and I'm not given the option of re-downloading OR repurchasing them.
Music purchased from the iTunes store is not stored in your personal iCloud account, and an iCloud account is not required to redownload them. You should be able to redownload them as explained here: http://support.apple.com/kb/ht2519. If you are unable to, contact iTunes store support for assistance by going to https://expresslane.apple.com ; click ‘iTunes', and then 'iTunes Store', then 'Purchases, Billing & Redemption'.

HT3275 Since Installing a new hard drive on my 2008 macbook and reconnecting to to time capsule through time machine, I can only get backups since the install.

Since Installing a new hard drive on my 2008 macbook and reconnecting to to time capsule through time machine, I can only get backups since the install.
I receive a message saying identity of backup dis has changed and offers me the choice of either Don't back up or Use this disc.

Time Machine treats any new drive like a new computer. It starts a completely new Time Machine backup. So you now have two backups - a new one and all your old ones.
Visit Pondini's Time Machine FAQ for help with managing your Time Machine backups.

My internet seems to be connected but since installing a new hard drive i cannot connect to safari so I cant do any updates

My internet seems to be connected but since installing a new hard drive I cannot connect to safari,tells me there is a problem but not what the problem actually is,so I cant do any updates because I cant connct to the browser?Any suggestions.....

If you use Lion, boot into your recovery pressing Command and R buttons, press "Utilities" menu, open Terminal and write:
resetpassword
If you have Snow Leopard, boot into your install DVD pressing C button, click "Utilities" and press Password Reset

New Apple keyboard on 10.5.8

Hi,
my old keyboard had some keys that lost their function, so I bought a new one yesterday.
I was wondering whether there is any update on getting the new Apple keyboard working properly on 10.5.8. The volume keys do not work and I couldn't figure out how to program them either.
I've read in older posts that the new keyboard will require 10.6.8. That's ridiculous. I won't upgrade to 10.6.8 just because of the keyboard.
Has anyone solved this issue?

It's that simple. Or find a third-party keyboard that will work, if there are any.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.

New Apple Keyboard Problems

I am not able to use the Dashboard and Exposé buttons on the new Apple Keyboard. I cannot assign them in the preferences nor were they set up initially. I have installed the latest keyboard update (Version 1.1) but it still does not work.
My Setup: An ACD 20" is attached to the PowerBook. The lid is closed.

Alright! I finally got my NEW aluminum keyboard from my local Apple Store (I made sure to call in before going... not that it's a journey to get there, but don't want to waste time if they don't have it) and just installed it with my PowerMac G4 Dual FW 800 model.
I'm typing on it right now instead of my PowerBook.
ALL functions are working for me. What I did was to install the keyboard FIRST by plugging it in to the computer's USB port.
Then I went to Apple's download/support site to get the keyboard update software 1.1...
http://www.apple.com/downloads/macosx/apple/firmware_hardware/keyboardsoftwareup date11.html
...and then restarted my PowerMac. Voila! (It didn't work. It was connected to a USB 2.0 PCI card, so I unplugged it from there to the built-in USB 1.1 port on the PowerMac and then it worked. I put it back to the USB 2.0 card's ports and it worked after that).
F1 and F2 don't work for brightness and contrast modes because I am now using an Envision 17" LCD dual monitor setup (my 17" Studio Display is being used by an older PowerMac G4 533 MHz). I think if it was an Apple LCD display--Studio (plastic) or Cinema (aluminum) versions--it would recognize it. The F3 for Expose and F4 for Dashboard work fine. I haven't tried the DVD player controls for F7 through F9. F10 through F12 work great for sound, even if I have non-Apple external speakers. (Makes me wonder about the monitor controls). Eject key works too. And the REAL eject key, not the F12 hold key down to eject.
So, I'm sorry that you're all having problems. I'd connect it to my PowerBook, but because I'm a very meticulous and exacting person, I don't want to disconnect anything because I have it setup where the wires are hidden and it's all perfect right now.
But as I said in an earlier posting, when I went down to my Apple Store and tried the new keyboards out that were connected to the NEW iMacs, those keyboard functions didn't work!! Irony, huh?
Mine purrs like a Leopard... aha!!
(I love the quiet sound and less exacting pressure needed to type as opposed to my previous black Apple Pro Keyboard. I would never have bought this new flat aluminum keyboard if it didn't match my Envision silver monitors).
By the way, I have a Mighty Mouse (wired version) connected to it too. And yes, the aluminum keyboard I bought was the wired version as well.
Message was edited by: Pismo 900
$49 well spent!! I don't like the wireless version. Looks kind of odd shaped with the extra space on top (for the batteries). They didn't have those in stock anyway.
Message was edited by: Pismo 900 (second edit)
Also, I haven't touched anything in System Preferences. Everything worked after FIRST, connect the keyboard, SECOND, install the software update, THIRD, restart (had to unplug it from PCI USB 2.0 slot to USB 1.1 native port, and then back to USB 2.0 port), and after login, all worked without a hitch.
I don't even want to fool around with system prefs now, since maybe that's what causes the problem (no proof there from me) when you try and tweak or customize your settings.

New Apple Keyboard - Dashboard and Exposé Keys not working

I have the new Apple Keyboard connected to my PowerMac G5 and i have installed the lasted Keyboard Software Update (1.1) from the Apple website. All new function keys are working (the media keys, brightness, etc.) except for the dashboard and exposé keys. I cannot get them to work, not even asign them in the preferences. Anyone else have this problem? Solutions?

I bought the new aluminum keyboard the other day, but didn't notice there was a software update required. Last night a keyboard software package appeared in Software Update, so I downloaded and installed it. Now virtually nothing works in the function keys except brightness and volume. No dashboard where it's supposed to be, no Exposé, and worryingly no F12 Preview In Browser, which I use a lot for Dreamweaver and web design. Dashboard now appears in F13.
I then went and downloaded the 1.1 Update I should have done in the first place, but this has changed nothing. And yes, I think the PowerPC users are being forgotten when this new stuff is made. But...just how many million of us are there?

IMac G5 & new apple keyboard - some keys not working

I have an iMac G5 (2GHz, 20 inch), running OS X Tiger (10.4.11) and I recently purchased the new apple keyboard (the wired version without the numpad, to save desk space). I am finding that the function keys at the top don't work - specifically, the keys that control sound. I've googled this, and installed the Keyboard Software Update 1.2 that most people said fixed their problem - but it hasn't fixed mine.
Instead, the f10-f12 keys don't control the sound functions, but the f12 key ejects discs (it sits next to the eject button, so perhaps this is a wiring error?), and the caps lock key does not always work when hitting it - it needs a large amount of pressure. I would think that my keyboard was defective, but I just exchanged it yesterday, and the new one has the same problems. I'm getting close to just giving up and getting a refund.
Message was edited by: JumpingJehosaphat

Hello - thank you for the quick responses! To answer your question, yes, I have repaired my permissions and restarted, to no avail.
I have looked through the keyboard prefs quite a bit, and cannot find anything that allows me to choose where to map the sound keys. I have checked "Use All F1 F2 etc keys as standard function keys". In the small aluminum keyboards, the f keys are dual-function - in this case, the f10-f12 keys also control dashboard, etc, which I have turned off (but I have tested the keys with these options both off & on, with the fn key, without the fn key, etc - tried lots of combinations). I've tried quite a few things to get these keys to work. Honestly, the f1-f4 keys don't seem to work at all either.
I might try and take a video later today to show you what I mean. The caps lock key is the biggest thing that's bothering me - I use it instead of shift to type, and 75% of the type it does not activate when pressed...I would think this was just one bogus keyboard if it weren't for the fact that I already exchanged it once...

New Apple Keyboard on 24" Imac (intel)

Dear appler's,
I just got my new apple keyboard (the ultra fin alum one) It's a great keyboard. But I got problems with the installation. The special key's like the media controllers don't work.
I downloaded and installed the software update (http://www.apple.com/downloads/macosx/apple/firmware_hardware/keyboardsoftwareup date11.html)
I have a 24" iMac (the last white one)
My preferences screen still look's the same it's normal?
P.S. Why no software with the keyboard? I had to go and do a search on google to get the software.

25 views and no reaction.
If you two experience these problems please let me know. Still no reaction from apple.

New Apple Keyboard requires 10.5.6?

I'm posting this here in the hope that someone has a new iMac with the new Apple Keyboard (sans numeric keypad) and another Mac running 10.4.11, and can try an experiment.
The new Apple Keyboard, sans number pad, is a great idea that I've been waiting for for almost 20 years. However, when I recommended it to a client (with a PowerBook G4 running 10.4.11), he came back and pointed out that it requires "Mac OS X v10.5.6 or later". Huh? It's just a keyboard, with a USB cable. Of course, it has the new set of F keys on the top row, but so do the Apple Keyboard with Numeric Keypad, which requires 10.4.1 (? - that's what the Apple Store page says, though I suspect it's a typo for 10.4.10) and the Apple Wireless Keyboard, which requires 10.4.10.
If someone could try the new Apple Keyboard with a Mac running 10.4.11 and see if and how it works, I'd very much like to hear the results. As I suspect would many others.

HI, I have the new keyboard and am still using Tiger (10.4.11). I found the function keys don't work as expected--the volume keys wouldn't work at all. I called Apple Care and they told me the new keyboards were designed for 10.5. For the volume keys I got something called "sizzlingkeysforiTunes" which works, although it opens iTunes. I was able to map a key for application windows, which is F13 on an extended one.
I was happy to be rid of the number pad since I use a pen tablet, but found I really really miss the home, end and pg up/pgdn keys. I use them constantly in Photoshop, and the command/control equivalents aren't working in Photoshop. I don't know if they'll work in Leopard, though.
So, I'm not so happy with it, but I like the size and lack of number pad.
J

New apple keyboard 2007 likes to fast-forward by itself

I recently set up my PowerBook as a desktop computer with external monitor, keyboard and mouse, while always leaving the PowerBook shut. My keyboard is the new thin apple keyboard and it seems to work fine after installing the update except that some times iTunes will just start fast forwarding through 4 or 5 songs before finally stopping, This usually happens when I'm not even sitting at the computer, so there is no input into the mouse or keyboard. It seems to be fairly random. Any suggestions?

Thanks for your replies. Ok, so the transport keys can control iTunes, even if it isn't the active application? That's what I've always wanted to do.
And the 2nd working USB port sounds great. It's always frustrated me that I couldn't plug my 1GB USB Flash Drive directly into the keyboard. Now I can do it without fiddling around on the back of the iMac.
You said Expose uses the F3 key, but Expose typically has 3 different functions: All Windows, All Applications and Desktop. How do you these 3 things with the new Apple Keyboard?

New Apple Keyboard with MacBook Pro

Hi - I got the new Apple keyboard today and in spite of other users opinion - I like it very much. It is small and very silent. I had a good feeling for the touch from the start. I love the new keys for multimedia, especially those for iTunes.
Only complaint I have: the keys for Dashboard and Exposé dont seem to work at all. Similar experiences or advice?
Thanks...

I just got my MBP yesterday and immediately found Expose to be an issue with the keyboard. I did some hunting and here's the solution:
this is easy. Go to the Keyboard/Mouse setup and uncheck "Use F1-F12 for Software features". That makes the F-keys F-keys again. If you want to control brightness and volume again then press "fn" plus the corresponding f-key.
Unfortunately, you can't customize it between the 2 modes so I went withusing hot corners.

Lots of issues since installing a new apple keyboard

Similar Messages

Maybe you are looking for