Lots of listener complaints, Error: Playbck Failed...
Hi all,
I've been doing a podcast for several years now, uploading to iTunes via Podbean. One issue that is being brought to my attention more often is the inability of many (not all, but many) of my listeners to listen to my show through the Podcasts app. They have been forced to resort to other means, e.g. Stitcher, etc. to download or stream the show. The issue they seem to have is that even after download a given episode, when they tried to actually play the file, they receive an "Error: Playback Failed" message. In trying it myself on my iPhone 5, I get the same issue. Obviously, this is incredibly frustrating, especially since it appears this has been happening for quite a long time now.
iTunes link for my show:
https://itunes.apple.com/us/podcast/solomonster-sounds-off/id313139609
RSS feed:
http://solomonster.podbean.com/feed/
Any insight into why this might be happening or how it can be remedied would be much appreciated.
Best,
Jason
If they say byte range requests are supported then I would assume that it is, though the test I just ran doesn't actually confrm this:
curl -I -r 200-300 http://solomonster.podbean.com/mf/feed/s7k8r/solomonster303.mp3
HTTP/1.1 302 Found
Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0
Cache-control: no-cache="set-cookie"
Content-Type: text/html; charset=UTF-8
Date: Sun, 08 Dec 2013 16:43:08 GMT
Expires: Thu, 19 Nov 1981 08:52:00 GMT
Location: http://media61.podbean.com/pb/8d084cc83b6705e422575c915e6b601c/52a4a19c/data1/bl ogs30/143249/uploads/solomonster303.mp3
Pragma: no-cache
Server: Apache
Set-Cookie: PHPSESSID=1p3ggqo2vvtqbbkcurpgn630q5; path=/
Set-Cookie: AWSELB=950F2B3D0E72D0285AA2F26D82F17A41F2C385CABDB1D2F4133453F11FFD06B3705AD947 1FB25E6A4BE3535EB9CF6FE0FE99DAA4C7AA8B57D02D175B3CBE9BAE927E33D81D;PATH=/;MAX-AG E=600
X-Powered-By: ASP.NET 2.0
Connection: keep-alive
As to the podcasts app I can't advise on this because I don't have an iOS device. I suppose you could try deleting the podcast and subscribing again, and see whether that makes any difference. You tell me that others are complaining, which would seem to rule out an issue specific to you. You could try asking in the iPhone forum - someone may be able to test, and offer suggestions.
Similar Messages
-
What's the fix for iTunes U's error:playbck failed?
I can't test it on the Podcasts app as I don't have an iOS device. The URL given for the media file is
http://torontogospel.com/sermons?show&file_name=Ptr.mp3
In fact it's http://torontogospel.com/sermons?show&file_name=Ptr.mp3 but you can't have an ampersand by itself in XML.
and this redirects to
http://torontogospel.com/wp-content/uploads/sermons/Ptr.mp3
which is the actual file URL. Although it works OK in iTunes when subscribing, and in the Store, it's possible that this redirect is upsetting the Podcasts app. It would be better to use the actual URL in the feed - the server does handle byte-range requests so it should work in the Podcasts app. -
Internal error: assertion failed - still won't work in LR4
When I try to export an image from LR4 I get the "internal error: assertion failed" error. I'm running Lion 10.7.3 on a MacBook.
I started by reading the thread at:
Re: "internal error: assertion failed" when exporting via LR4
tinaTS offered what she thought was the correct fix but her suggestion didn't apply to my situation. She suggested moving user presets but I don't have any to move.
I also tried the basic “repair permissions” and Lion restart with no luck.
Kirk Marcus suggested removing the com.adobe.Lightroom4.plist from my library. This didn't help, still getting the error.
Then I removed these files as well:
com.adobe.Lightroom3.plist
com.adobe.Lightroom2.plist
com.adobe.Lightroom3.LSSharedFileList.plist
com.adobe.Lightroom3.plist.lockfile
None of that helped.
I tried removing all files that began with com.adobe.Lightroom and then creating a new library and just importing one picture but I still get the same "internal error" VERY FRUSTRATING.
Obviously, the program is worthless to me if I can't export images.
Additional suggestions would be appreciated. I see that lots of people on the internet are having this problem but none of the suggestions I've found so far have been of any help.Thanks for the suggestions. I tried removing the com.adobe.Lightroom4.plist. This didn't help, still getting the error.
Then I removed these files as well:
com.adobe.Lightroom3.plist
com.adobe.Lightroom2.plist
com.adobe.Lightroom3.LSSharedFileList.plist
com.adobe.Lightroom3.plist.lockfile
None of that helped.
I tried creating a new library and just importing one picture but I still get the same "internal error" VERY FRUSTRATING. -
Hi,
I am working on SSRS 2008 R2.
My Colleague gave me one RDL. I have added it to my SSRS project on BIDS & Tried to Open by double-click on that RDL.
I got a popup error saying "Failed to open report 'reports_List.rdl'. clicked on
Details button & noticed error explanation as . "Invalid character in the given encoding. Line 1, position 1".
When i try to View Code of this RDL, I got another error message saying "Exception from HRESULT: 0x80041FEB"
Can anybody suggest me ... what exactly the root cause of it? how can i resolve it ?
thanks a lot in advance !
best regards,
VenkatHi Venkat,
Did you use Visual Studio 2010 on your test? It is a known issue of Visual Studio 2010. Please refer to the following document. It has fix method provided by the Microsoft Web Development Tools team to work around the issue.
https://connect.microsoft.com/VisualStudio/feedback/details/552134/hresult-error-creating-timetracking-sample-web-site-project
Since the issue related to Visual Studio. I suggestion you post the question in the following forum:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=Vsexpressvb
It is appropriate and more experts will assist you.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support -
"Content generation error. Failed to Export the PDF file"
Building a multi-folio in InDesign 6 Folio Builder V30. Received "Content generation error. Failed to Export the PDF file" on several of the spreads. I have tried reducing the original pdf files sizes, but that did not help.
Any suggestions on other possible causes or way to fix.?
thanks
Christopher Huber
MMNI'm very new to DPS so I hope the following description makes some kind of sense.
My magazine is in the process of doing trial runs for an iPad edition. I'm setting some templates up for us to work off so the process from magazine to iPad will run a lot smoother month to month.
So far I've set up some dummy stock pages in an InDesign CS6 document, currently 15 pages long.
All images are linked and all fonts have paragraph styles applied to them.
I'm at the stage I want to check the document on my iPad to test run font sizes and their legibility.
We have successfully been able to export the document as a jpg file but we really need the PDF format. When attempting this we get the above message.
Sonia. -
*** ERROR = CONNECT failed with SQL error '12154' after Oracle Upgrade
Hello Experts,
Recently I upgraded my oracle database from 11.2.0.3 to 11.2.0.4.The upgrade completed successfully but I am unable to start the instance.
R3trans -d failing with the error--
OCIServerAttach(OCI_DEFAULT) failed with -1=OCI_ERROR
OCIServerAttach(OCI_DEFAULT) failed with SQL error 12154:
ORA-12154: TNS:could not resolve the connect identifier specified
OCIServerAttach(con=0, svc=069C1630): Error 12154 attaching new srv=069C17D0
OCIHandleFree(con=0): Server handle srv=069C17D0 freed.
server_detach(con=0, svc=069C1630; srv=NULL, stale=2)
OCIHandleFree(con=0): Service svc=069C1630 freed (i=1).
*** ERROR => CONNECT failed with SQL error '12154'
-->oci_get_errmsg (con=0, rc=12154)
OCIErrorGet() -> SQL error code: 12154; buflen=66
OCIErrorGet(): error text ->
ORA-12154: TNS:could not resolve the connect identifier specified
ocica() -> SQL error code 12154,12154
DbSlConnect(con=0) -> orc=12154, rc=99=DBSL_ERR_DB
***LOG BY2=>sql error 12154 performing CON
***LOG BY0=>ORA-12154: TNS:could not resolve the connect identifier specified
I have checked listener is up and running properly.Entry is maintained in tnsnames.ora.
Also kernel is upgraded with latest path.Curent kernel version--742
Please suggest on the mentioned error.I am attaching the logs here.Thanks in advance.
Best Regards,
DebadityaHi Debadiya
Kindly check this SAP Notes
1204916 - Error: "ORA-12154" when connecting to Oracle from a Windows 64-bit platform
2153975 - Database connectivity fails with ORA-12154
556232 - Environment settings for R/3/Oracle on Windows
443867 - ORA-12154 Collective SAP note
BR
SS -
2 error messages - failed to install extention 2.1 and output module 2.1
I just tried to update my Encore CS4 from the Master Suite. I have two error messages " failed to install extention Mgr. CS4 2.1 and failed to install output module update 2.1
Encore will load a new project and save but I can't do anything else like add files before it crashes. Any help please. - ArtThis might not apply with En CS4, but there were some issues on install, and on updates in Photoshop. It seems that MS had a bum MSI (Installer) version, and it caused a lot of PS installs and updates to fail. Do not recall any specific error messages. The cure there was to download and install the revised MSI module from the MS site. I would imagine that any MSI module would be heavily Windows version-specific. Take that as a warning to check any very carefully, before downloading and installing. MS is pretty good at having a ReadMe with installation instructions for each such download. It almost always contains the exact versions of Windows, that the file is for. Please read any installation instructions carefully.
This might be worth a look. I do not have a link to the exact page, but a search of the MS site should yield something. I'd search for "MSI," to start.
I just do not recall any issues with En and either installation (on proper systems with updated OS's) or with any updates.
Good luck, and please report your success.
Hunt -
ERROR = CONNECT failed with sql error '12518'
Hi All,
OS Win 2003 - 32 Bit, Database - Oracle 10.2.0.2 , I am facing this from yesterday, suddenly SAP was done and when i am checking the logs it is not able to connect to the database.
I have checked the services for oracle - service was down, i have started the oracleService<SID> and also i have restarted the listener.. after this when i am trying to start the SAP through MMC again the problem is face.. and also the oracle service is stopped. when i tried starting the database from OS level it was giving me error like
ORA-24324: service handle not initialized
ORA-24323: value not allowed
ORA-03113: end-of-file on communication channel
again the Oracle service is stopped i am not getting why the oracle service is stopping..
dev_w*.log
Thu Apr 09 10:33:50 2009
M calling db_connect ...
C Prepending D:\usr\sap\SID\DVEBMGS01\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@SID on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C84528 05C89AC4 05C8934C
C Attaching to DB Server SID (con_hdl=0,svchp=05C89298,svrhp=05C9AB64)
C
C Thu Apr 09 10:33:51 2009
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12518
[dboci.c 4172]
C *** ERROR => CONNECT failed with sql error '12518'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@SM3 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C84528 05C89AC4 05C8934C
C Detaching from DB Server (con_hdl=0,svchp=05C89298,srvhp=05C9AB64)
C Attaching to DB Server SID (con_hdl=0,svchp=05C89298,svrhp=05C9AB64)
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12518
[dboci.c 4172]
C *** ERROR => CONNECT failed with sql error '12518'
[dbsloci.c 10933]
B ***LOG BY2=> sql error 12518 performing CON [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> ORA-12518: TNS:listener could not hand off client connection [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 12518 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-12518: TNS:listener could not hand off client connection [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10156]
M
M Info for wp 16
M
M stat = 4
M reqtype = 6
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server hostname_SM3_01 on host tcs042619 (wp 16)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Apr 09 10:33:51 2009
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10354
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc16 7988) [dpnttool.c 327]
Any suggestions pls
MaheshHi Rohit,
when i check in the sqlnet.log
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SM2\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 04-SEP-2007 15:09:30
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: Message 12560 not found; No message file for product=NETWORK, facility=TNS
ns secondary err code: 0
nt main err code: 530
TNS-00530: Message 530 not found; No message file for product=NETWORK, facility=TNS
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:16:32
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:16:46
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:19:27
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:19:28
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:19:29
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 19:26:38
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12518, connecting to:
(DESCRIPTION=(ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=hostname)(PORT=1527))(CONNECT_DATA=(SID=SID)(GLOBAL_NAME=SID.WORLD)(CID=(PROGRAM=D:\usr\sap\SID\SYS\exe\uc\NTI386\R3trans.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 20:35:23
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Fatal NI connect error 12518, connecting to:
(DESCRIPTION=(ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=hostname)(PORT=1527))(CONNECT_DATA=(SID=SID)(GLOBAL_NAME=SID.WORLD)(CID=(PROGRAM=D:\usr\sap\SID\SYS\exe\uc\NTI386\R3trans.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-APR-2009 20:35:23
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 09-APR-2009 09:15:43
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleSID)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=SID)(CID=(PROGRAM=E:\oracle\SID\102\bin\sqlplus.exe)(HOST=hostname)(USER=SIDadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 09-APR-2009 09:17:28
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
nt secondary err code: 2
nt OS err code: 0
This error occured when the oracle service was not started..
Mahesh.. -
Ebook error message: "Fail to write destination file error"
I am attempting to transfer ebooks (checked out via my library's ebook consortium) from Adobe Digital Editions to my Nook. I have done this in the past with no issues, but recently I have been getting the following error message: "Fail to write destination file error".
I know the issue is NOT lack of space on my Nook (I cleared it of all info and still received the error message).I had this problem as well, and after doing some research via google (because I found NOTHING helpful in adobe forums), I found the problem....my Nook was full. I had no idea this was even possible! But, I borrow a lot of library books, and didn't realize that after they expire, they are still taking up space on my Nook. Here's how to check: plug your Nook into your computer, go to file manager (right-click the start button in Windows), find the Nook drive and right click, choose properties. This should show you a pie chart of used/free space on your Nook. If this is the case, you need to remove some files from your Nook. For me, I had to find the Digital Editions file and delete all the thumbnails and actual files for the library books. If it's booked you've purchased, perhaps you need to archive some books. Hope this helps!
-
Failed: 4x Host[hostname] error: NewMovieFromFile Failed -2048 Help please
I have seen a lot of talk about this error but none of it really applies to my situation.
Failed: 4x Host[hostname] error: NewMovieFromFile Failed -2048
I am compression a large number on video files most of them are media100 or mpeg4 or mpeg2. Most of the files work just fine but a few of them just won't work. I get the same error each time just on a different Mac.
I have a managed cluster setup with 5 G5s. I have 1 mac control all the others and the files are submitted from one of the other machines in the cluster. If I submit the files to the single machine they work fine but when I submit them to the cluster I get this error. The hostname will change each time but the error is the same.
All of the macs can view the files and play them fine. Someone mention QT Pro. I tried adding that to a few of them but I got the same problem. It seems that there is just something about the files that it doesn't like.
Any ideas.
KenI've seen this error when our Xsan was configured for high data transfers. Turns out there the san was corrupting the segments, and the nodes couldn't read the segments and assemble the files. Only the node that wrote the segment could read it. After talking with Shake support, turned out setting the san to default settings fixed it.
-
EPMAPatch Error: Opatch failed with Error Code = 73
Hi All,
I am trying to Install the Patch EPMA11.1.1.2.03, I got error.
The Error is: F:\hyperion\Opatch>hpatch apply EPMA_11_1_1_2_03
Invoking Opatch 10.2.0.4.9
Oracle Interim patch Installer version 10.2.0.4.9
Copyrights <c> 2009, Oracle corporation. All rights reserved.
Oracle Home:f:\Hyperion
CentralInventory:C:\Programfile\Oracle\Inventory
From:n\a
OPatch version:10.2.0.4.9
OUI Location:f:\hyperion\oui
Logfile Location:f:\Hyperion\cfgtoollogs\opatch\opatch2010-07-05_14-32-38PM.log
Patch history file:f:\ Hyperion\cfgtoollogs\opatch\opatch_history.txt
ApplySession applying interim patch ‘9206696’ to OH ‘f:\Hyperion’
List of Homes on this system:
OPatch Session cannot load Inventory for the given Oracle Home f:\Hyp[erion. Possible causes are:
No read or write permission to ORACLE_HOME/.Patch_storage
Central Inventory is locked by another OUI Instance
No read permission to Central Inventory
The lock file exists in ORACLE_HOME/.Patch_storage
The Oracle Home does not exist in Central Inventory
Apply session failed:Apply session failed to prepare the system. Oracle Home Inventory gets null oracleHomeInfo system Intact, patch will not attempt to restore the system
Opatch failed with error code = 73
Please help,Its urgent for us
Thanks in advance.792208 wrote:
I am trying to run a 3rd party software that access Oracle. I have set up the ODBC connections and tested the connections. They tested successfully. But when I try and connect to Oracle using this tool I get the following error: OCIEnvCreate failed with return code -1. Any help would be greatly appreciated. Thanksif the connection request actually gets to the listener, then it will be logged.
If no record exists within listener.log file, then the root cause & solution are external to Oracle. -
ODBC error "SQLAllocStmt failed."
Hi,
I have a simple program with three partitions: DBSO, SO and GUI,
querying a master/detail pair of tables in a database. Until
recently this worked fine on my (client) machine, but I couldn't get
it working when I put the SO's on the server. Specifically, it
would return zero rows no matter what it should have got.
We're using MS-SQL Server 6.5 on NT4sp4/i386 with an NT client. The
ODBC versions are: SQL Server driver 3.60.0319, DB library 6.50.252
and net library 6.5.0.0. These are the same on both client and server.
The SQl-Server side is ok, the PowerBuilder app that uses it natively
still works.
My SO throws this exception when run on the server:
USER ERROR: Prepare failed for dynamic SQL statement 3, error from database
is:
ODBC SQLAllocStmt failed.
[Microsoft][ODBC Driver Manager] Driver does not support this function
Class: qqdb_UsageException
Detected at: qqdb_OdbcVendorInfo::DoSQLAllocStmt at 10
Last TOOL statement: method ContactManager.FindContactsDynamic
Error Time: Tue Jul 13 11:04:18
Distributed method called: qqdb_SessionProxy.Prepare!82 (object name
site/contactservices_cl0/contactwindows_cl0-contactdbso0x1d8:0x2) from
partition "ContactWindows_cl0_Part2", (partitionId =
2AE77400-1A1B-11D3-9D87-DC8E0ECEAA77:0x1d9:0x1, taskId =
[2AE77400-1A1B-11D3-9D87-DC8E0ECEAA77:0x1d9.3]) in application "Forte
Runtime", pid 205 on node ERMINTRUDE in environment centrale
ODBC SQLSTATE: IM001, Server: GodzillaDatabase, UserName: sa
Database Statement: select contact_number
"ContactNumber", name "ContactName", street_line1
"StreetLine1", street_line2 "StreetLine2", street_line3
"StreetLine3", suburb "Suburb", state
"State", postcode "PostCode", country
"Country", area_code "AreaCode", industry
"Industry", stage "Stage", comments
"Comments", postal_line1 "PostalLine1", postal_line2
"PostalLine2", postal_line3 "PostalLine3", postal_line4
"PostalLine4", postal_line5 "PostalLine5", invoice_person
"InvoicePerson", pay_nett "PayNett" from contact
where Contact_Number = 5
Exception occurred (remotely) on partition "ContactWindows_cl0_Part1",
(partitionId = 2AE77400-1A1B-11D3-9D87-DC8E0ECEAA77:0x1d2:0x9, taskId
=
[2AE77400-1A1B-11D3-9D87-DC8E0ECEAA77:0x1d8:0x3.26]) in application
"Forte
Runtime", pid 342 on node GODZILLA in environment centrale.
Turning on ODBC tracing shows this is the originating error:
ftexec 156:16b EXIT SQLAllocStmt with return code -1 (SQL_ERROR)
HDBC 0x00938360
HSTMT * 0x00d8e2e4
DIAG [IM001] [Microsoft][ODBC Driver Manager] Driver does
not support this function (0)
During the connect sequence we also get this error:
ftexec 156:16b ENTER SQLSetConnectOption
HDBC 0x00938360
UWORD 112 <SQL_PACKET_SIZE>
UDWORD 8192
ftexec 156:16b EXIT SQLSetConnectOption with return code -1
(SQL_ERROR)
HDBC 0x00938360
UWORD 112 <SQL_PACKET_SIZE>
UDWORD 8192
oft][ODBC SQL Server Driver][SQL Server]The ODBC catalog stored procedures
installed on server godzilla are version 6.50.193; version 07.00.0324 or
later is required to ensure proper operation. Please contact your system
administrator. (0)
Now, until recently the program worked fine when run locally. Unfortunately
while
trying to work out what the problems are we've managed to produce the same
error
on the client, with no idea how exactly we did it. As of now I can't locate
the
SO's back on the client because Forte thinks ODBC is not set up.
USER ERROR: The node ERMINTRUDE is unable to support this partition
(ContactWindows_cl0_Part1). This is because either all of the restricted
projects required by the partition have not been installed on the node or
the
node does not have the external resource or thread package that the
partition
uses. This partition requires the restricted project(s) ODBC and the
external
resource GodzillaDatabase.
In my ODBC configuration I have GodzillaDatabase set as a System DSN, having
just moved it from being a User DSN. Neither fixes that problem.
Does anyone have any ideas on this, or solutions to it?
Thanks
Chris
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/forte>Hi Steve,
If you open the Report and then click on DataBase, Log on and connect first. Then open your report, then Database, Set Location and once it's done then Verify the Database. Fix any errors or warnings that may pop up.
Lots of changes between 8.5 and 2008. CR detects that the report is the old format and it then goes through an series of internal report upgrade routines to convert all functions to the current format.
Also, all of the database drivers were re-written to take advantage of the updated functionality and Client enhancements. As well as we removed any "custom hacks" that we did back then to fix "issues" int he DB client drivers at the time. All of those "fixes" were removed, to much work to maintain them all, now if there are issues it's usually due to the DB Client not following ANSII 92 Standards.
One issue that does show up from time to time is that the order you inserted the tables can have an affect on how CR generates the SQL, may not be the case for your issue though, just something to watch for.
What happens if you create a new report and use that same SQL, save it, close all, re-open the report and run it. Do you get the same errors?
Also note: you did not say if you also updated the ODBC driver? As of CR 9 we are UNICODE compliant, may be your client needs to be updated also. Also verify it's using ODBC 3 and not ODBC 2 standards.
Thank you
Don
Edited by: Don Williams on May 6, 2010 7:21 AM -
Error: OCIEnvCreate failed with return code -1
I am trying to run a 3rd party software that access Oracle. I have set up the ODBC connections and tested the connections. They tested successfully. But when I try and connect to Oracle using this tool I get the following error: OCIEnvCreate failed with return code -1. Any help would be greatly appreciated. Thanks
792208 wrote:
I am trying to run a 3rd party software that access Oracle. I have set up the ODBC connections and tested the connections. They tested successfully. But when I try and connect to Oracle using this tool I get the following error: OCIEnvCreate failed with return code -1. Any help would be greatly appreciated. Thanksif the connection request actually gets to the listener, then it will be logged.
If no record exists within listener.log file, then the root cause & solution are external to Oracle. -
Trans.log file showing 'ERROR = CONNECT failed with sql error 12541'
Dear All
We have upgraded our datatabse from Oracle 9.2.0.8 to Oracel 10.2.0.4 on our ECC 5.0 IS-AFS SAP system. When we check version from SQL, it's showing 10.2.0.4. That means database is successfully upgraded. Now, when we login through our <SID>adm user and checking R3trans -d, it is showing
'This is R3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'V
AP'"
R3trans finished (0012).'
In the trans.log file it is showing,
4 ETW000 R3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 22.06.2009 - 11:56:40
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Mon Jun 22 11:56:40 2009 110 0.000
110
4 ETW000 [dev trc ,00000] db_con_init called 27 0.000
137
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 62 0.000
199
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' ...
4 ETW000 77 0.000
276
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/VAP/SYS/exe/run/dboraslib.o), hdl
0
4 ETW000 8142 0.008
418
4 ETW000 [dev trc ,00000] Library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' loaded
4 ETW000 43 0.008
461
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/VAP/SYS/exe/r
un/dboraslib.o
4 ETW000 61 0.008
522
4 ETW000 [dev trc ,00000] Version of '/usr/sap/VAP/SYS/exe/run/dboraslib.o' is "640.00",
patchlevel (0.276)
4 ETW000 421 0.008
943
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/VAP/SYS/exe/
run/dboraslib.o
4 ETW000 46 0.008
989
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/VAP/SYS/exe
/run/dboraslib.o
4 ETW000 75 0.009
064
4 ETW000 [dev trc ,00000] New connection 0 created 48 0.009
112
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 53 0.009
165
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 55 0.009
220
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 53 0.009
273
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 49 0.009
322
4 ETW000 [dev trc ,00000] Got ORACLE_HOME=/oracle/VAP/102_64 from environment
4 ETW000 521 0.009
843
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 84 0.009
927
4 ETW000 [dev trc ,00000] got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
4 ETW000 65 0.009
992
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8 2033 0.012
025
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPVAP's password 49 0.012
074
4 ETW000 [dev trc ,00000] Connecting as /@VAP on connection 0 (nls_hdl 0) ... (dbsl 640 1
80309)
4 ETW000 57 0.012
131
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 49 0.012
180
4 ETW000 [dev trc ,00000] 0 UTF8 1
0x1113a4400 0x1113b6b00 0x1113b63b8
4 ETW000 58 0.012
238
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 48 0.012
286
4 ETW000 [dev trc ,00000] Allocating server context handle 42 0.012
328
4 ETW000 [dev trc ,00000] Attaching to DB Server VAP (con_hdl=0,svchp=0x1113b97d8,srvhp=0
x1113b99f8)
4 ETW000 95 0.012
423
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
4 ETW000 4556 0.016
979
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error 12541.
4 ETW000 59 0.017
038
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 12541 39 0.017
077
4 ETW000 [dev trc ,00000] Try to connect with default password 184 0.017
261
4 ETW000 [dev trc ,00000] Connecting as SAPVAP/<pwd>@VAP on connection 0 (nls_hdl 0) ...
(dbsl 640 180309)
4 ETW000 46 0.017
307
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 48 0.017
355
4 ETW000 [dev trc ,00000] 0 UTF8 1
0x1113a4400 0x1113b6b00 0x1113b63b8
4 ETW000 48 0.017
403
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=0,svrhp=0x1113b99f8)
4 ETW000 54 0.017
457
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=0x1113b97d8,srvhp=0x1
113b99f8)
4 ETW000 54 0.017
511
4 ETW000 [dev trc ,00000] Deallocating server context handle 0x1113b99f8 42 0.017
553
4 ETW000 [dev trc ,00000] Allocating server context handle 33 0.017
586
4 ETW000 [dev trc ,00000] Attaching to DB Server VAP (con_hdl=0,svchp=0x1113b97d8,srvhp=0
x1113b99f8)
4 ETW000 54 0.017
640
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
4 ETW000 2547 0.020
187
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error 12541.
4 ETW000 45 0.020
232
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 12541 28 0.020
260
4 ETW000 [dblink ,00428] ***LOG BY2=>sql error 12541 performing CON [dblink#3 @ 428]
4 ETW000 220 0.020
480
4 ETW000 [dblink ,00428] ***LOG BY0=>ORA-12541: TNS:no listener [dblink#3 @ 428]
4 ETW000 42 0.020
522
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'V
AP'"
Checked the listener service. It is already started and status is OK. Please help.
Regards
Shashank ShekharHi
Yes, I am trying it with orasid user also. There in trans.log file it is showing:
'4 ETW000 R3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 22.06.2009 - 15:54:42
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Mon Jun 22 15:54:42 2009 109 0.000
109
4 ETW000 [dev trc ,00000] db_con_init called 27 0.000
136
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 61 0.000
197
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' ...
4 ETW000 79 0.000
276
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/VAP/SYS/exe/run/dboraslib.o), hdl
0
4 ETW000 8174 0.008
450
4 ETW000 [dev trc ,00000] Library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' loaded
4 ETW000 43 0.008
493
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/VAP/SYS/exe/r
un/dboraslib.o
4 ETW000 61 0.008
554
4 ETW000 [dev trc ,00000] Version of '/usr/sap/VAP/SYS/exe/run/dboraslib.o' is "640.00",
patchlevel (0.276)
4 ETW000 430 0.008
984
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/VAP/SYS/exe/
run/dboraslib.o
4 ETW000 46 0.009
030
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/VAP/SYS/exe
/run/dboraslib.o
4 ETW000 76 0.009
106
4 ETW000 [dev trc ,00000] New connection 0 created 48 0.009
154
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 53 0.009
207
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 57 0.009
264
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 54 0.009
318
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 49 0.009
367
4 ETW000 [dev trc ,00000] Got ORACLE_HOME=/oracle/VAP/102_64 from environment
4 ETW000 526 0.009
893
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 84 0.009
977
4 ETW000 [dev trc ,00000] got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
4 ETW000 64 0.010
041
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIEnvCreate(mode=16384)' failed: rc = -
1
4 ETW000 1464 0.011
505
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code -1 40 0.011
545
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIErrorGet' failed: rc = -2
4 ETW000 58 0.011
603
4 ETW000 [dblink ,00428] ***LOG BY2=>sql error -1 performing CON [dblink#3 @ 428]
4 ETW000 74 0.011
677
4 ETW000 [dblink ,00428] ***LOG BY0=>Cannot get Oracle error text. [dblink#3 @ 428]
4 ETW000 55 0.011
732
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'V
AP'"
Someone suggested 'The solution is to download the new oracle client dll into the kernel'. Can anyone tell from where i can get the client dll for the kernel.
Regards
Shashank Shekhar -
I went to IO 7 and Getting Error "Playback Failed" on every podcast
I was able to listen to podcast when I first updated. It now fails with Error "Playback Failed" on every podcast. I also see that the facebook app is never updating. I powered off the Iphone 4 and powered on. I did the same on my IMAC and try resyncing. I still get the same error.
The problem is in the Yahoo mail server farm. Their mail servers are terrible. Give it time. It will eventually straighten itself out. In the mean time, create an account a gmail account, outlook.com account, etc. and consider switching.
Maybe you are looking for
-
where to find an app how to find my mac in case gets stolen or???
-
Socket connection between Java and C
I want to establish socket connection between Java client and C server (on Unix). Can anybody tell how to do it? Will the socket created in client be available in server. I tried out but there was no response from the server.
-
My scenario is PI receives an xml file from ECC and sends it out in a SOAP call to a third party. I have added the WSDL as an external definition and performed all the setup to call the webservice and pass data. That all works fine. My issue is I n
-
Anyone one with 1,000+ JSPs with custom tags?
We're having some interesting memory problems with Sun JVMs, I'd like to hear how your app is working out (misery loves company). Mike
-
Hi guys Can someone please help me with little problem, in my finder I dont see my icons next to the Favorites, I am attaching a pic so yo uguys can see. Please help. I am running Mountain Lion