Lots of Nano problems... Plese help me!

I HAVE A NEW NANO THAT DOSEN´T WORK. IT WORKS WHEN IT´S NOT CONNECTED TO MY COMPUTER BUT WHEN I CONNECT IT THE DISPLAY SHOWS "DO NOT DISCONNCT". BUT THATS NOT ALL, ITUNES DOSEN´T FIND IT WHEN I CONNECT IT AND MY INFO ON THE NANO SAYS I ONLY GOT 2,7GB LEFT BUT THERE´S NOTHING ON IT. I GET AN ERROR MESSAGE WHEN I REINSTALL ITUNES. IT SAYS THAT I HAVE TO RUN "CHKDSK". I HAVE TRIED EVERY STEP ON THE APPLE FAQ PAGES. PLESE HELP ME!

firstly you can check to see if you ahve the latest version of itunes. to disconnect your ipod, try safley removing the hardware. all ipods only have 1.7 because its some of it used by the apple ipod system iteself. apple didnt say 2gb for your music, they just said 2gb ipod lol

Similar Messages

Major Nano Problem - Please Help

I have a 1 GB iPod Nano that worked fine when I got it in May 2006. Now, however I have a major problem. I put my iPod on the computer to charge through USB and when it was finished I could not safely remove. Actually, the iPod was not recognized by my computer or iTunes at all and the screen keeps flashing the apple logo and will not turn off until the battery runs down.
Here is what I did to try and fix. Reset and restore. I also tried to put the iPod in disc mode. When I put in disc mode my computer recognizes the iPod and it is shown in iTunes but when I safely remove, the iPod remains in disc mode and I can't get out of disc mode unless I reset and then I am dealing with the flashing appe logo again.
Could someone please help!
Windows XP

I'm thinking that the nano is the cause of the problem and so i "think" tou showld send it back for the cost of it and buy a new 2 gig one.

A lot of recent problems, please help

Let's go back to a month ago to start.
Turned on my computer, had an X appear where the apple should have been, reinstalled leopard, erased my hard drive completely.
Worked fine until two weeks ago when I got stuck at a solid blue screen at startup. Ran disk utility and installed leopard onto my external (didn't time machine anything). Booted up Leopard though my external and moved all my internal files to my external and then went to install leopard to my internal. Worked, but then couldn't get it past the apple screen with the "pinwheel"
Took it to my school's help desk and they said I needed a new hard drive. Bought one, they installed it and I brought it back to me room. It has "mac os extended" as the version and works, but I can't install leopard.
For some reason when I put it in, it won't boot past the same apple screen with the "pinwheel", and wont bring up the setup during start up. (pressing c to try and run the disk) So I put the disk in after it boots to my os extended and click install that way, says it needs to restart for the setup to work and it never gets past the apple screen. It seems that no startup keyboard commands are working (can't run safe mode or single user mode etc.)
The mac "extended" is fine for the time being, but I can't install itunes 8.0 or anything using a mpkg extension.
Please help.

MusicTDS wrote:
Let's go back to a month ago to start.
Welcome to the Apple Discussion:
Turned on my computer, had an X appear where the apple should have been, reinstalled leopard, erased my hard drive completely.
Never a good idea. Fix it, don't kill it. Unsolved problems have a way of returning.
Worked fine until two weeks ago when I got stuck at a solid blue screen at startup. Ran disk utility and installed leopard onto my external (didn't time machine anything). Booted up Leopard though my external and moved all my internal files to my external and then went to install leopard to my internal. Worked, but then couldn't get it past the apple screen with the "pinwheel"
Might be a hardware issue?
Took it to my school's help desk and they said I needed a new hard drive. Bought one, they installed it and I brought it back to me room. It has "mac os extended" as the version and works, but I can't install leopard.
You should be able to install Leopard on any qualified machine.
For some reason when I put it in, it won't boot past the same apple screen with the "pinwheel", and wont bring up the setup during start up. (pressing c to try and run the disk) So I put the disk in after it boots to my os extended and click install that way, says it needs to restart for the setup to work and it never gets past the apple screen. It seems that no startup keyboard commands are working (can't run safe mode or single user mode etc.)
The mac "extended" is fine for the time being, but I can't install itunes 8.0 or anything using a mpkg extension.
You need to find out why Leopard will not install. We need more specific data.
Please help.
We're trying

Ipod nano Problems need help fast!!!!!!

I got my nano in october everything was working fine.Until 2 weeks ago my ipod wasnt getting reconized by itunes.Im really getting frustrated and i need help.

Welcome to Apple Discussions!
Read through this...
http://docs.info.apple.com/article.html?artnum=61711
btabz

IPod nano problem..help me please..

Hi all!..
I have one iPod Nano, my brother of 7 years created a password, and now I do not know which is.
I do not have more the computer where I connected iPod for the first time, it broke.What I make?
Help me, please,I am despaired.=\
I hope you help me.
Windows XP

If you no longer have your original PC and you can't get it unlocked you'll need to restore it. Just be aware that restoring will erase the hard drive, reload the software and put it back to default settings, so if you have songs on your iPod that aren't on iTunes you will lose them if you have no back up. Once the restore is complete follow the on screen instructions and it should connect to iTunes and give you a prompt to automatically update your library onto the fresh installation:
Restoring iPod to Factory Settings with iTunes 7
iPod: How to use the Screen Lock

About the socket security problem,Plese help.

I use the port 843 server to send xml to swf.But not work. Please help. My Code is:
Server:
//HelloTest.java
import java.io.IOException;
import java.net.ServerSocket;
import java.net.Socket;
//让其继承线程类是为了更好控制其余的线程
public class HelloTest extends Thread {
* @param args
public static void main(String[] args) {
// TODO Auto-generated method stub
//发送策略的服务器
new HelloTest().start();
//这个是用的fuq
new Thread(new QtServer()).start();
@Override
public void run()
System.out.println("策略服务器启动");
boolean lising=true;
ServerSocket ss;
try {
ss = new ServerSocket(843);
while(lising)
try {
//得到socket服务器
Socket sc=ss.accept();
SendPolicyFile sp=new SendPolicyFile(sc);
System.out.println("为什么呢");
new Thread(sp).start();
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();
try {
Thread.sleep(1000);
} catch (InterruptedException e) {
// TODO Auto-generated catch block
e.printStackTrace();
ss.close();
} catch (IOException e1) {
// TODO Auto-generated catch block
e1.printStackTrace();
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.io.PrintWriter;
import java.net.Socket;
//SendPolicyFile.java
public class SendPolicyFile implements Runnable {
private Socket soc;
private OutputStream _socketOut;
private InputStream _socketIn;
public SendPolicyFile(Socket s) throws IOException
this.soc=s;
_socketOut=s.getOutputStream();
_socketIn=s.getInputStream();
//设置超时的限制
//soc.setSoTimeout(1000);
public void run() {
// TODO Auto-generated method stub
    try {
readRandSp();
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();
@SuppressWarnings("unused")
private void readRandSp() throws IOException
if(read().equals("<policy-file-request/>"))
System.out.println("write Policy to flash");
writePolicy();
        //close stream and socket
close();
//写策略文件的方法
private void writePolicy() throws IOException
   String string1="<?xml version=\"utf-8\" ?><cross-domain-policy><site-control permitted-cross-domain-policies=\"master-only\"/><allow-access-from domain=\"*\" to-ports=\"8001\"/></cross-domain-policy>"+"\u0000";
PrintWriter pw=new PrintWriter(_socketOut);
pw.println(string1+"\u0000");
pw.flush();
pw.close();
System.out.println(string1+"\u0000");
//关闭流
//关闭socket
public void close()
if(_socketOut!=null)
try {
_socketOut.close();
if(_socketIn!=null)
_socketIn.close();
if(soc!=null)
soc.close();
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();
_socketIn=null;
_socketOut=null;
soc=null;
//发送两个Socket
private String read() throws IOException
System.out.println("这里也执行吗");
StringBuffer buffer=new StringBuffer();
int codePoint;
boolean zeroByteRead=false;
do{
//这个地方阻塞了
codePoint=this._socketIn.read();
//如果接受到的codePoint为null那证明客户端与我们失去连接了
if(codePoint==0)
zeroByteRead=true;
else
buffer.appendCodePoint(codePoint);
while(!zeroByteRead && buffer.length()<30);
return buffer.toString();

I use the port 843 server to send xml to swf.But not work. Please help. My Code is:
Server:
//HelloTest.java
import java.io.IOException;
import java.net.ServerSocket;
import java.net.Socket;
//让其继承线程类是为了更好控制其余的线程
public class HelloTest extends Thread {
* @param args
public static void main(String[] args) {
// TODO Auto-generated method stub
//发送策略的服务器
new HelloTest().start();
//这个是用的fuq
new Thread(new QtServer()).start();
@Override
public void run()
System.out.println("策略服务器启动");
boolean lising=true;
ServerSocket ss;
try {
ss = new ServerSocket(843);
while(lising)
try {
//得到socket服务器
Socket sc=ss.accept();
SendPolicyFile sp=new SendPolicyFile(sc);
System.out.println("为什么呢");
new Thread(sp).start();
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();
try {
Thread.sleep(1000);
} catch (InterruptedException e) {
// TODO Auto-generated catch block
e.printStackTrace();
ss.close();
} catch (IOException e1) {
// TODO Auto-generated catch block
e1.printStackTrace();
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.io.PrintWriter;
import java.net.Socket;
//SendPolicyFile.java
public class SendPolicyFile implements Runnable {
private Socket soc;
private OutputStream _socketOut;
private InputStream _socketIn;
public SendPolicyFile(Socket s) throws IOException
this.soc=s;
_socketOut=s.getOutputStream();
_socketIn=s.getInputStream();
//设置超时的限制
//soc.setSoTimeout(1000);
public void run() {
// TODO Auto-generated method stub
    try {
readRandSp();
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();
@SuppressWarnings("unused")
private void readRandSp() throws IOException
if(read().equals("<policy-file-request/>"))
System.out.println("write Policy to flash");
writePolicy();
        //close stream and socket
close();
//写策略文件的方法
private void writePolicy() throws IOException
   String string1="<?xml version=\"utf-8\" ?><cross-domain-policy><site-control permitted-cross-domain-policies=\"master-only\"/><allow-access-from domain=\"*\" to-ports=\"8001\"/></cross-domain-policy>"+"\u0000";
PrintWriter pw=new PrintWriter(_socketOut);
pw.println(string1+"\u0000");
pw.flush();
pw.close();
System.out.println(string1+"\u0000");
//关闭流
//关闭socket
public void close()
if(_socketOut!=null)
try {
_socketOut.close();
if(_socketIn!=null)
_socketIn.close();
if(soc!=null)
soc.close();
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();
_socketIn=null;
_socketOut=null;
soc=null;
//发送两个Socket
private String read() throws IOException
System.out.println("这里也执行吗");
StringBuffer buffer=new StringBuffer();
int codePoint;
boolean zeroByteRead=false;
do{
//这个地方阻塞了
codePoint=this._socketIn.read();
//如果接受到的codePoint为null那证明客户端与我们失去连接了
if(codePoint==0)
zeroByteRead=true;
else
buffer.appendCodePoint(codePoint);
while(!zeroByteRead && buffer.length()<30);
return buffer.toString();

Video problem plese help!!

ok so i have some music videos in itnes right, i converted them to the MPEG format, and theyre in the music vids playlist. but, when i plug in my ipod to update it, they dont appear ANYWHERE on my ipod. id really appreciate it if someone could help me.
thanx

This is a good place to start:
Frequently asked questions about viewing and syncing video with iTunes and iPod

My iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: "unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

my iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!

TS3297 i bot a 3g iphone 2nd hand and it is trobleing a lot with os and not working plese help me

i bot a 3g iphone 2nd hand and it is trobleing a lot with os and not working plese help me

The following guide gives information on how to sync ringtones from your computer to the phone. The reference section at the bottom of the quide also gives instructions on how to convert a song to a ringtone. https://discussions.apple.com/docs/DOC-3792

1st generation nano problems....help greatly appreciated!!

i have a first generation nano, and i plugged it in to my computer last night and it said something about needed to scan for problems...then it popped up my F drive saying that i needed to insert something into the F drive....
i have tried three different cords to hook up my iPod to my pc...I tried another usb port...so i am assuming that it is either my computer, the iTunes or the iPod...regardless of what it is, my iPod wont update. and when it says it is updating it's not.
i am running a much older version of iTunes, the one that came on the cd with the first gens...i think 7.2..cant remember, and i have a Vista OS. could THAT be what causing issues? i usedto have it hooked up to an XP and it worked fine, then when I changed it over to the Vista pc, everything went to pot.
Does ANYONE know what to do?? I would appreciate any help, i really dont want to have to buy a new iPod if at all possible...

This forum is for 3rd generation nano problems, not 1st.

P6N Lots of problems please help

P6N Lots of problems please help
The setup is the following:
P4 D935 3.2gHz
P6N Diamond MS-7320 Bios 1.3V
Corsair XMS2-6400C4DHX
NX8600GT-TD512EZ/D2
Seagate Barracuda 7200 250Gb SataII 16Mb
Akasa 460W Dual Rail
Please help I have lots and lots of problems with lockups that can happen any time post , bios , loading vista and sometimes during OS. Some times will work ok play games etc. Already tried different combinations fitting the mem modules even tried and some pc4200 modules same problems. Spent lots of hours clocking the mems with different settings but non is stable. I am not interested in overcloking just to make it stable to start with. When is actually running is fine is more than enough for me. Already looked to lots of posts on the msi forum but… Since the cpu is old can I go back on an older bios version???? The Corsair modules have to run at 2.1V or is it possible to use them with slower setting. So confused so lost ….. please HELLPPPPP
Any help greatly appreciated.

please, don't buy any more unneded parts. first find the problem then buy if no solutions available.
One thing I find with BIOS issues is to do a full clear.
1. disconnect the power cord from the power supply(turn switch to off if there is one.
2. hit the power switch to clear the power out of the system.
3. set the cmos jumper to clear and leave there if one is available.
4. Pull the battery.
5. carefully short out the battery connector on the motherboard to drain any power left.
6. press the clear cmos button and hold for 30sec minimum, if you didn't have a jumper to set.
7. replace battery, move jumper back, plug in power cord, turn on power sipply switch.
Now it should hopefully power up. go into BIOS and load optimized results. hit save and exit and when it gets back to the post screen, go back into bios and set your normal MB settings(ie. set boot devices, boot order, disable sound if using sound card, etc...)
go into your H/W Monitor section and list the CPU Vcore settings to make sure it is getting the power it needs. I just looked it up and it's suppose to run from 1.225v - 1.325v.
also, try your most generic ram you have with auto settings. the faster the ram usually the more volts they need and default volts are 1.8v for ram and sometimes faster chips have issues with lower volts.
Let me know how this works for you.
-=Mark=-
ps. make sure everything is unplugged from the computer you don't need. just cpu, 1 stick of ram, and video. and of course keyboad and mouse. Please make a signature with all your systems specs including make and model numbers. I hate guessing at solutions and I'd hate to see you buy any more unneccessary parts because of lack of information.

I recive email from itunes to veritify my email adress and is said...''Click link below'' The problem is that i cant see the link plese help me! :)

i recive email from itunes to veritify my email adress and is said...''Click link below'' The problem is that i cant see the link plese help me!

Hi Maastricht2014,
Until and unless you remember the password to your old email address, you will not be able to access the eBooks as those eBooks are only authorized with your old email address only.
The only workaround or alternative to access your eBooks will be to contact the eBook vendor and ask them to migrate the eBook from your old email to the new one.
Hope that Helps!
~ Arpit

My i phone ringer is giving me a lot of trouble. It does not play any sound or music, the incoming call ringtone is working, but no music is playing. The problem itself disappears , and then reoccurs again. Anybody with same kind of problem, plz help !!!

the iphone ringer is not working, the incoming call ringtones are playing , but ringer volume bar has disappeared. The problem itself gets fixed at times but i'm having a real tough time . I have almost tried evrything from resetting the phone, switiching it off and do it gain, but nothing seems to work. A nybody with anykind of knowledge reguarding this problem, please help!!

Unfortunately, this is not Apple, but just the iPod Community forum, of iPod Classic end users, who shares your angst. You can post it to iPod Feedback

IPod Mini Problems Please Help

This is my second post of the type... no one replied to that so im hoping someone could help me.
Problems:
-Wont Update or Load Songs
-It starts loading, gets to around the 5th song (out of well over 600) and says "Ipod Update Complete, OK To Disconnect" though nothing is on the iPod.
-Occasionally wont restore to factory settings.
Okay, before you suggest the five R's, ill note that ive put several MONTHS into this, and ive tried them well over 20 times in order.
Things Tried
-5 R's Repeatedly (as noted above)
-updating on a friends computer (several times with no luck, same problems)
-requested help over the phone
-The number i called was the Apple US Help Line, which the person helped me for about an hour before he said he did not know what was up, and transfered me to the Canadian help line, where they demanded a large sum for help, which i could not pay (under 18).
-When i first noticed the problems, I sent it in (around the end of december)and problems continued upon arrival of the new mini.
I will also note that my sisters iPod Nano works perfectly fine, no problems, as well as my friends iPods adding songs from my computer.
Please please help... im currently resorting to a crappy CD player that skips for my music... and have been... its starting to break me inside.
Thank you,
Milan

Natalie,
If you have your iPod set to transfer your music manually, then that do not disconnect message will continue to be displayed on your iPod until you manually eject it.
You can do this by clicking on the little eject icon next to the iPod listing in the source window of iTunes, or right click on it and select eject. Another way would be to use the safely remove hardware icon in the system tray next to the clock (looks like a grey rectangle with a green arrow above it). Click on this then select your iPod. Or through Windows, select start/my computer, right click on the iPod, select eject.
If you have your iPod set to automatically sync with iTunes, right click on the iPod in iTunes, select options and if you have a check mark in the box marked enable disk use, remove it and your iPod should automatically disconnect after its finished transferring music.
For the iPod to automatically open iTunes, you have to have "open iTunes when this iPod is attached" checked.
Go to edit/preferences/iPod to do this.
If you prefer to keep the iPod set to manual transfer, look at this. In fact, the whole tutorial is a must read.
Managing Your Songs Manually
iPod Tutorial
iTunes Tutorial Windows

Urgent: Sessions problem pls help me

Hi all,
Its already late to post this problem.pls help me urgently.
I have a servlet & two jsp's. first i request servlet, it processes something and forwards request to my first jsp. In that jsp on a button click, i'm displaying a new popup by calling showModalDialog. this dialog gets data from the same servlet but it forwards to my second jsp.(second jsp can be seen in dialog)
Now if i submit form from my second(dialog) jsp, the servlet reports that session has expired. I tried a lot but invain. any one who helps me is appreciated well by all of our forum.
waiting 4 u r reply,

It could be that you have cookies turned off and you're not using URL Rewriting.
In J2EE, the first time your browser makes a request to the server, the server responds and appends a SESSION_ID parameter to the request as well as storing a cookie with the SESSION_ID.
The second time your browser makes a request, the server checks for the cookie. If it doesn't exist it checks for the parameter. If neither exist the server assumes its the first time your browser has made a request and behaves as describe in the previous paragraph.
In your case when you submit the form if you have disabled cookies and the action attribute doesn't have the SESSION_ID paramter appended to the url, the browser will assume it's a first request. The user will not be logged in, hence your session has expired error.
To fix this you need to encode the URL in your JSP. You can use the struts html:rewrite tag or the HttpServletReponse.encodeURL method, or if you're using JSP 2.0 the JSTL c:url tag.

Lots of Nano problems... Plese help me!

Similar Messages

Maybe you are looking for