Lots of spam after UPN change

In preparation for a move from premises based Exchange 2010 to Office365 we recently started to change our UPNs from local domain to external domain (i.e. change UPNs from mycompany.local to mycompany.co.uk).
About 24 hours after the change our email users started receiving lots of spam.
What could be the cause of this?

Hi,
Does the issue happen to all users? Please confirm if the spam message is send from internal or external users.
Please check the SCLJunkThreshold parameter configured in your organization. We can refer to the following article to set Anti-Spam to your mailboxes:
http://technet.microsoft.com/en-us/library/bb123559(v=exchg.150).aspx
Anti-Spam Protection in Exchange 2013
http://technet.microsoft.com/en-us/library/jj218660(v=exchg.150).aspx
Regards,
Winnie Liang
TechNet Community Support

Similar Messages

Posting to Accounting: Retroactive Posting after a change in the GL account

Hello all,
i would like to ask you about a problem that we face in a live system throught the integration HR-FI. We have already run live posting to accounting until the end of November. But, the client wants us to change the account of a wage type. We have created a new symbolic account because the new account is an expense account whereas the previous account was a balance sheet account. We have used also the user exit in RPCIPE00 as we have different employee groupings in our system. The problem is that when we run posting to accounting for December and there is retroactive calculation the system debit/credit again the old wage type again without having results in December for this wage type.
Customizing :
01.2010-11.2010 DEBIT : X1(BALANCE SHEET)
                            CREDIT: Z1
122010-12.9999 DEBIT : X2(EXPENSE ACCOUNT)
                            CREDIT: Z1
Example:
11.2010 -> Payroll calculation for WT01:100 EUROS. Posting of this WT01: Debit : X1 (100EUROS) Account ,Credit : Z1 Account ((100EUROS)
12.2010 -> Retroactive calculation for november for other wage types. Not WT01. But in the posting to accounting for WT01 there is debit/credit. Note: After 01.12 we have the change in the posting customizing of this WT01.
              DEBIT                CREDIT
X1                                  (100EUROS)
Z1      (100EUROS)       (100EUROS)
X2      (100EUROS)
How can i stop the retroactive posting that takes place after the change? This wage type WT01 SHOULD NOT be posted in December.
I am looking forward to your feedback.
Thank you in advance.
Sissi

Thank you for your quick response.
I have already delimited Wage Type WT01 and used the new symbolic account:
Customizing :
01.2010-11.2010       DEBIT : X100 Symbolic (BALANCE SHEET)
                                  CREDIT: Z100 Symbolic
12.2010-12.9999        DEBIT : X200 Symbolic(EXPENSE ACCOUNT)
                                  CREDIT: Z100 Symbolic
FI: X100 symbolic Linked to X1 ACCOUNT
     X200 symbolic Linked to X2 ACCOUNT(NEW ONE)
     Z100 symbolic Linked to Z1 Account
The problem is that after posting for December i have 100 euros as debit in Account X2 (the new account) and 100 euros in the old account X1 as credit. IN Z1 account i have no problem as the result is zeroed. According to the customer, they should not have these amounts in X1,X2 accounts as there is no retro-calculation for this specific WType.
Accounts                  DEBIT                     CREDIT
X1   :                                <->                   (100EUROS as CREDIT)
Z1   :                    (100EUROS as DEBIT)               (100EUROS as CREDIT)
X2   :                   (100EUROS as DEBIT)                         <->
I hope the schema above will depict how the posting is performed after the change in account of the wage type.
So, you suggest that this cannot be ceased as the system works in this way?
Thank you a lot.
Sissy.

I get a lot of spam on my old mobileMe-alias. How do I delete that old .me adress?

I am using my iCloud-account, but still I get a lot of spam to my old MobileMe-alias. How do I delete the adress? (They don´t show up in iCloud)

[email protected] and [email protected] are the same thing - you can't actually delete the @me.com version.
However you can deal with the problem by setting up a Rule to move all messages address to the @me.com address to the Trash, from which they will automatically be deleted after a week, so you won't even see them.
Go to the Mail page at http://icloud.com ; click the cogwheel icon at bottom left and choose 'Rules'.

"Rendering: settings changed" after saving changes from Bridge

I have LR 2.6 on my Mac. I import RAW images through LR, let LR build 1:1 previews. Once the import has finished & previews are built, LR moves from image to image fine. I then do my basic edits, deletions, and do a batch renumber.
Next I go to Bridge to make my adjustments in the RAW window without opening the files. I go back to LR, save the changes, allowing the Bridge changes to overwrite the LR development import presets in the xmp files.
It usually takes LR a while to save all the changes, but eventually it does it. However, here is my issue. No matter how much time I give LR to render new previews, I don't think it does, at least not until I go to Library mode double click an image to view larger (to fit the window). When I go from image to image, it takes a few seconds while displaying the message "Rendering: settings changed..." Now, this is not necessarily right after I save the changes, but it still happens weeks later- whenever I go to view those images. Does LR not automatically re-render the previews after development changes have been made and saved to LR?
And if not, how would I force LR to do it for that catalog, or for all my images?
Thanks,
R

Robert Ripps wrote:
A fair question- one, when I have tried, LR is way slower on my Mac G5 than doing it in Bridge, which is slow itself. I just launched LR, had an open folder with 303 images in it which I had already rendered previews of, then clicked on Develop module- it took 13 seconds to go to that module & finish "loading". Yes, a new commuter would solve many problems <g>, but until then....
What you may need is more RAM. Or do you have other applications working in the background 13 seconds to build a preview!!!!! Using a old Macbook with 1.2 GB RAM an it does it faster than that!LR doesn't require a lot of power from a machine...it does need as much RAM as you can stick in a machine and the fastest disks you can use...but if it is taking 13 seconds to build a single preview then it isn't really worth using IMO
Why not make all you RAW adjustments in Lightroom Develop module. The raw processing engine is the same as ACR and you can choose "auto save changes to xmp" in the preferences.
Ah, bingo. That works, abet slowly (see above). Okay, I will just have to remember to manually do that once I save changes to LR from xmp data. I guess I thought LR would be smart enugh to do that itself, but I guess not. And again, I find it faster to go back & forths, even with an extra step.
LR can be set to automatically write any changes to xmp, it doesn't have to be done manually (set this in preferences) you just have the choice. It won't read changes made in other applications automatically as this would be a very bad idea..it would after all over write the LR database. So if you do want to over write the LR database you must activly choose to do so.
.

Why do I continue to receive notifications, even after I change my preferences?

why do I continue to receive notifications, even after I change my preferences? I had about 100 or so today. I switched all of my notification anwers to NO, as in , I don't want to receive any email from apple communities whatsoever. ??? Thanks.

You need to double check that you aren't subscribed to the community, not just to the question you asked. Go to the community that you are receiving the emails from and the same box called "Actions" will appear there just like it does next to the individual question. Make sure that you are not reciveing email notifications for that community. Probably the community where you asked your question. Typically that is what causes people to get 100's of email notifications. I think that this is not included in the tutorial so a lot of people miss it.
Hope that works for you.
laverne's mom

I cannot see my apps after the change of my account's nationality.

My account was in US once. After I change it to another country, my downloaded apps cannot be shown in iCloud even if I download them again in the new country. It has been very inconvenient.
Can anyone help me? thanks a lot.

Thank you for the information, I feel guilty now since I have recently advised someone that isn't possible, however:
Judging by the wording you use, you did this in iTunes on a Mac/PC. Have you also changed your country on your iOS device settings.

AirPrint - iPhone 5 can not find printer after router change

AirPrint - iPhone 5 can not find printer after router change; however router is exact replacement of previous one (Zyxel, issued by Imagine wireless). AirPrint was working previously. Printer is on same network. Wireless printing working fine. Have tried rebooting prtiner, phone and router. Any suggestions?

I'd look to HP for support.
Here's an HP Airprint-related trouble-shooting page: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03314085&tmp_task=solveCate gory&cc=us&dlc=en&jumpid=reg_r1002_usen_c-001_title_r0001&lc=en&product=5271613
Lots more info on the HP support site.

Long waiting times when going back to the organizer after doing changes of images. Elements 11.

After doing changes of images and going back to the organizer I have to wait a long time. This was not the case when I used elements 9. I have a lot of images stored around 18000. There are also often long waiting times when I move around in the organizer. Any suggestion?
Bo Augustsson

Please see blog: http://psekb.blogspot.in/2013/04/how-to-improve-pses-performance-please.html
Please let me know if that doesn't helps.
~Andromeda

TS3899 Email stopped working after password change

I changed my att.net password after my account was hacked and used to send a spam email to my entire address book. Now my iPad email will not work and I get a message that my user name or password are incorrect. I have changed the password in my iPad mail settings to match my new password at att.net. I have looked at the iPad support stuff on mail problems and have shut down my iPad to no avail. I have two emails in my iPad outbox that have not been sent and I cannot receive new emails.
ANY SUGGESTIONS.

Howdy scad_mfa,
Welcome to Apple Support Communities.
It sounds like you’re running into issues sending and receiving iMessages on your notebook after changing the password for your iCloud account. The article linked below will walk you through the process of updating the Apple ID information used by Messages and other Apple services on your devices.
What to do after you change your Apple ID email address or password - Apple Support
Mac with OS X Mountain Lion or later
Open the Messages app, select Messages > Preferences, then click the Accounts icon.
If you're signed out, click Accounts and sign in with your updated Apple ID or password.
If you're signed in with your previous Apple ID, click Accounts, then select your Apple ID from the list of accounts. Click Sign Out, then click Sign Out again when asked to confirm. Sign in with your updated Apple ID or password.
Take care,
-Jason

My ipod works in itunes but does not appear in "my computer" after I changed the properties

My ipod works in itunes but does not appear in "my computer" after I changed the properties.
First off, I'm using Windows XP (and Mac SnowLeopard) Here's how it started. For some reason my ipod started showing up as a camera when I plugged it in. It works fine in itunes, though. But when I tried to access it from "my computer" it only
showed me the one and only picture I had on my ipod. I deleted that picture hoping it would no longer show up as a camera. When it still did I right-clicked on it in "my computer" and selected "properties". Under "autoplay" I
chose for it to 'not show up' or 'take no action' or some such deal when I plugged it in. I thought that would stop it from popping up the window that asks whether i want to 'open camera wizard' or 'open camera scanning' or 'open folder to view files' or 'take
no action' , etc. But now it won't show up in "my computer" at all. I also have a Mac with SnowLeopard. When I plugged my ipod into it my ipod doesn't show up in "finder" either! So basically my problem is not a mechanical one with hardware
or software; yht ipod still works fine in itunes. I just need to undo the change I made. I've searched all around my preferences, utilities, options, etc. It shows up on my "Device Manager" but not on "Disk Management".
Any help would be very much appreciated. Thanks.

Hi,
To show up in Windows Explorer, you can try placing the iPod into
disk mode.
Moreover, i recommend you to
restore ipod to factory settings.
If this issue still persists, locate to device manager, uninstall and reinstall USB Mass Storage Device driver.
Here is an article you can refer to below:
http://support.apple.com/kb/TS1369
To get more help, you can also redirect to apple support forum:
http://www.apple.com/support/ipod/
Thanks!
Andy Altmann
TechNet Community Support

Admin permanent status gone after password change

Hi everyone.
a couple of days ago i decided to change my password as good safety measure. changed as usual, only getting a message about keychain and a possible need to do the change in it after unlocking. seemed pretty standard to me, don't know if it is. (6 month mac user...)
however, for some strange reason, afterwards the change, even if i am still an admin in the user accounts i have to identify myself with pass every time i need to do some change in admin areas, as changing the apps in the apps folder.
i seem to be working as a standard guest , needing to elevate my status every time i need to something standard as changing my apps or renaming them.
i've tried correcti the permissions in the disk utility and also tried to repair my keychain, without great sucess.
anyone knows how can i get my permanent admin status again? it's a pain to need to type a password every time i want to drag and drop an app!
Filevault is active on my home folder.
thanks for your help
filipe

Macbook-de-Filipe:Applications filipe$ ls -aldeO /Applications/scilab-5.1.1.app
drwxr-xr-x@ 3 filipe wheel - 102 17 Abr 20:42 /Applications/scilab-5.1.1.app
for example this one. an app in Apps folder i wanted to update
i didn't changed app folder permissions before. i believe all this weird behaviour appeared after i changed my password.is there a system log i can see?
i was cheking the app folder permissions and is :
system : read and write
wheel : read
everyone: read
i haven't changed them before but i have found that if i had a admin group with read and write permissions i can have back my standard usage. however i don't know the implications of this and don't like treating the symptom, prefer instead to treat the cause
thanks for your help V.K.

A lot of problems after installing Windows XP using Boot Camp on a Mac Book

I have been having a lot of problems after installing Windows XP Home Edition (2002).
For one, after installing Windows using Boot Camp with Mac OS X 10.5.1, I opened Windows on my Mac Book, inserted the Mac OS X Disk 1 as in the instructions and got the message: +"This package requires a newer version of the Windows installer. Do you want to update the version of the Windows Installer on your system?"+ When I clicked Yes (I had NO idea what it meant at the time), I got the message: "The required resource 'UPDATE' is missing" and the Installer quit.
How do I fix this problem?
Another problem I have is that there is no sound on the Windows XP, yet it works perfectly on Mac OS X. Is there any way to fix this problem?
A third problem I have is that I can't wirelessly connect to the internet using Window XP, yet I can on Mac OS X. I have no idea on how to fix this, and it's really messing with me. D:<
D: There are way too many problems, and I have a feeling there will be a lot more later on. Help....
~Twilight

---I'm moving this topic to the Boot Camp forums.
-Twilight

How do you update apps that where purchased using different iTunes accounts? I get a cannot connect to iTunes message and it won't accept the password even after you change it.

Both my iPad and iPhone have the same problem. I have purchased apps with three different accounts. I understand I will need to use the original acct to do the update but every time it asks for the password I put it in and get a message that I cannot connect to iTunes store. I have even had the password reset and it still will not connect on the upgrade. But I can sign in with that account and purchase new apps i am loading a free one now just to make sure. So what is that about? Please do not tell me I have to also use the original password! We have reset them so many times that there is no way to remember the original one used at time of purchase a year and 1/2 ago. Please help. I have also upgraded to the iCloud thinking this would solve the problem but it still exists.

I use only one Apple ID and only one ID. I did have to change the password at one point but I had no issues at all with updating apps after I changed the password.
If you can download new apps with the ID that you changed the password for, I would think that you will be able to update apps associated with that ID as well.
Did you try restarting the iPad after signing out of the one account and then sign in to the other account/accounts?

Crystal Report (RDC) doesn't print correctly, after Printer change ?

There are problems with the page format and the color settings for the new printer !
It should be resolved with ADAPT01104291 FixPack3.8
Description: Crystal reports may not print properly after users change printers by using the SelectPrinter command from the Report Designer Component (RDC). The cause of the problem is that the incorrect DEVMODE structure size is allocated to the print job.
We are using CRXI_R2_SP5_Upgrade: ProductID=11.5.11.1470.2.26.Patch
but we still have the problems !

Hello Don, thank you for your extensive answer. The PCL printer of HP is not the trouble maker. The problem is obviously replicable with any other Printer Driver (Espon/Sharp/Kycocera a. s. o.) I only installed this PCL Printer Driver of course you mentioned it in your example before.
Okay, let's talk about the Devcap-Program and there Information about the paper source of a printer. Even in Visual Basic it's possible to get those Information by Win-API-Call's. Here they are:
PrinterID: , AusgabeName: , TreiberName: , Port: LPT1:, TrackDefault: , PaperSize:
Papier-Schächte:
Automatisch auswählen, Nr: 15
Automatische Druckeraus, Nr: 262
Schacht 1, Nr: 261
Schacht 2, Nr: 260
Schacht 3, Nr: 259
Schacht 4 (2000-Blatt), Nr: 258
Manueller Einzug (Schac, Nr: 257
Papier-Formate:
Letter, Nr: 1
Legal, Nr: 5
Statement, Nr: 6
Executive, Nr: 7
A3, Nr: 8
A4, Nr: 9
A5, Nr: 11
B4 (JIS), Nr: 12
B5 (JIS), Nr: 13
11x17, Nr: 17
Umschlag 10, Nr: 20
Umschlag DL, Nr: 27
Umschlag C5, Nr: 28
Umschlag B5, Nr: 34
Umschlag Monarch, Nr: 37
Jap. Doppelpostkarte gedreht, Nr: 82
12x18, Nr: 131
9x12, Nr: 132
C4, Nr: 133
Maximum 11,7 x 17,7, Nr: 134
and even set those Information for the RDC-Sturcture, so there is a solution for the setting of the paper size.
But there is not solution for the setting of the color nor the further page settings (Printing onesided or bothsided a.s.o.)
I can change the default windows printer settings but that has no effect on the RDC-Print ! So I think, there must be a solution by the Crystal-Report-Design-printing-DLL (craxdrt.dll) !
Greetings V. Hölscher

How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or password. If I delete my apps and start over, I may lose the apps that I purchased...

How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or Password. If I delete my appos and start over, I may lose the apps that I purchased (like the ones for $5 +....

Apps are always tied to the ID that was used to purchase them originally. Did you try entering your old password and see if that works?
If you need to sign out of your old account go to Settings>Store>Tap on your ID and sign out. Sign in with the new one.
you can also access your ID in the featured tab of the App Store. Swipe to the bottom of the screen and you will find it there as well.

Lots of spam after UPN change

Similar Messages

Maybe you are looking for