Lots of spinning beach balls. MBP 3,1 OSX 10.8.2

Dear all
I own a 2007 MBP 3,1 2,4 ghz core 2 duo with 6gb of RAM (recently the video card was replaced because of the dreaded nvidia problem known to these devices.. - mind you, only the video card was replaced, not the logic board (was out of warranty by 11 days..)
I used it on OX snow leopard without a problem and OSX Lion too.
But after installing an SSD 180gb from intel and clean installing 10.8.2 i keep having the dreaded beach ball issue. Everytime i open a finder window it stalls and hangs. i have problems switching programms.. (the SSD itself is fast, startup times are near 0)
Activity monitor shows plenty of free RAM (4gb +-) and no page outs.. 90% of the processor is idle, but still it hangs.. it's getting really frustrating..
A clean install has already been done so no 3th party apps are installed..
Any ideas

Filip, the Trim command has nothing to do with. Be aware that you have to reset the Trim command everytime you update the OS. The only "easy" method to set the Trim command is with the latest version of TrimEnabler (2.2) which may not work anymore when the next update comes out, research that before you use it. The older versions of TE are crapware. To do it yourself with Terminal commands (Grant Pannel) is even trickier. The Intel SSD has Grabage Collection in its controller, thus it is not a big disadvantage when the Trim command is not set.
The 1.5GB/s "problem" is only when the SSD connects, thus setting "never sleep" for the harddrives is a good idea; do not restart too often.

Similar Messages

FCPX 10.1 Very slow on iMac and lots of spinning beach balls

I have noticed since I have started to use FCPX 10.1 on my Late 2012 iMac (32GB RAM, 680MX Graphics, i7 quad core, thunderbold Arecca Raid) I am getting lots of spinning beach balls and things are generally slower.
I am really hoping Apple thought about people who cannot affored a Mac Pro, and ensure the performance is also good on iMacs, but unfortunately I am seeing a drop in performance compared to 10.0.9.
Has anyone else with an iMac noticed this?

Same experience after upgrading to 10.1 on mid 2011 27" imac 3.4 i7 16GB of RAM. I was midway through a project when I upgraded but I also made a copy of 10.0.9 and the project so i could go back to it if anything went sideways. The project is all RED 4K and it was smooth as could be before the upgrade. Now if you just want to grab a clip and move it around the timeline there is a three second delay before you can do so. Even just grabbing an audio file and moving it a couple frames forward causes it throw a beach ball up. Play back of the timeline is perfect though, no dropped frames or anything.
As it is right now I'm loading up 10.0.9 and finishing this project. After it's done I will try and start a library from scratch and see if that makes a difference. Right now, 10.1 is just unusable for me unfortunatley.
I really hope they didn't just make my iMac obsolete.

MacBook Pro is slow in loading pages. Lots of spinning beach balls. What to do?

MacBook Prois slow in loading pages from the internet. Lots of spinning beach balls. What should I do?

Lots of similar stories and help in the Mac OS X Snow Leopard (and Lion) forums for 10.6.x or 10.7
And might want to find the real MacBook Pro forum.

Clean install of Lion has lots of spinning beach balls?

I did a clean install of Lion last week. Before I installed any applications or made any personal preference changes I updated the Lion with all software updates.
However after thinking this was a near perfect/clean install after I week I seem to experience lots of spinning beach balls. My wife notices it a lot when she's checking her school web email, which she seems to lose her cursor for several minutes with beach balls.
I don't know what's going on...I ran verify disk permissions with no change.
Ideas?

As an experiment, I would see if using something like the OpenDNS or Google DNS servers has any effect. Often times while doing networking things, there are name lookups and if the DNS servers are slow, or unresponsive, you can see network delays.
System Preferences -> Network -> Advanced -> DNS -> [+] (click the plus button at the bottom of the list to add new DNS entries). The one at the top of the list will be your primary DNS server.
OpenDNS.org
208.67.222.222
208.67.220.220
Google DNS
8.8.8.8
8.8.4.4

Very Strange iPhoto problem and lots of spinning beach balls!

Hi - been using iPhoto 08 since it came out. Never a problem. About a week ago things starting going weird. It would crash and I'd get the spinning beach ball a lot. This never happened ever. It got so bad I jumped on here, followed some advice and downloaded iphoto library manager. I rebuilt my library - no change. I would double click a photo to enlarge it and it would just stop with a spinning ball. Other programs worked fine, just iPhoto would ground to a halt. Then I noticed some pics I would double click to enlarge would be corrupt. Grey half way down or black completely? They use to be fine. So I got so frustrated that I reinstalled Leopard. Everything worked fine. I even downloaded a trial Lightroom and it worked fine too with a project of mine. Tonight I decided to test iPhoto and it is still playing up. My iMac is a 24 with all latest updates. 4 Gig ram. Hard drive has 250 gig available. my iPhoto library is on an external drive which has 140 gig available. Something went wrong in the last week or so. Is there a way to search out and find a corrupt file or whatever is causing my mac to struggle using iphoto? Thanks so very much for any help.
Rob

Have you tried to rebuild the library? Make a backup of it first and then launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select all the options.
If that doesn't clear up iPhoto's problems rebuild the library with iPhoto Library Manager as follows:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 -Download iPhoto Library Manager and launch.
2 -Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be untouched for further attempts at fixing or in case the rebuilt library is not satisfactory .
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: iPhoto 8's (09) new option in the library rebuild pane, "Rebuild the iPhoto Library Database from automatic backup" may make this tip obsolete. We'll know when users have occasion to use it and see if that's the case.

Lots of spinning beach balls

Hello,
I have a Mac mini G4 (see specs in signature) and it worked fine a for a while until at one point a month or two ago, there was something wrong with the file directory or something so I had to do a complete zero erase and install. It worked fine for a while, but lately everything I do has been causing me to see more and more of the dreaded spinning beach ball. For example, clicking on "log in" on the apple discussion page brought about the spinning beach ball. Opening a new window can sometimes bring a spinning beach ball. Even in iChat it will randomly show me the spinning beach ball. iTunes as well has been giving me plenty of grief so much that I can't even listen to music on my computer because it will freeze and the seconds in the song will stop moving and then it plays for a bit and then stops again. I don't know what's wrong with my computer. In the Activity Manager it says I have 660 MB free memory and I have a 94% idle CPU. It's not dusty and it doesn't feel hot, in the iStat Pro widget it says the HD is at 119 degrees Fahrenheit. What the heck is wrong with my computer? It is really frustrating to not be able to even play an MP3 on my computer or have Safari freeze just because I opened a new window. The strange thing is that it always comes back, as in, when it freezes, I just have to wait a little bit and then it starts working again. So far I have tried repairing the disk permissions, repairing the disk, running "sudo periodic daily weekly monthly" and even running AppleJack in "deep clean" mode. Please, any help would be vastly appreciated.
P.S. As I was writing this, I got the beach ball twice.
Message was edited by: el pinguino

There are a number of possible issues that could cause this other than the ones you appear to have attempted to deal with so far.
The most obvious is an issue with Fonts - Macs are sensitive to font conflicts in particular, though some fonts cause problems even with no conflicts. Open Font Book and get it to check and resolve conflicts, then go through the font families and turn off what you absolutely don't need (even if only to run the system for a day or so to see if it helps - they can be turned on again when needed).
Next obvious is prebinding, though with a newly reinstalled system that shouldn't be a problem. Try to update prebinding anyway, just to rule that out.
Also ensure that permissions are repaired and remove all caches. Applejack does this, though personally I prefer YASU. After that is done, then use Disk Utility to check the boot drive (you'll need to boot from another MacOS volume such as the original install disk to effect repairs if needed).
After that, it's possible the issue is a damaged property list file, so grab a copy of Preferential Treatment and scan both user and system levels. Delete anything it flags as a problem.
Lastly (for now at least), create a new user on the system and log into that to see if that user suffers the same issues.

My MBP is real slow, lots of spinning beach ball. Why?

I took it to the genius bar on Michigan Avenue in Chicago, but a sharp young man there didn't help.
Are there tools on board here that I can use to find the problem?
Thanks,
Jerry

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software -- potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions -- they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are several lines of text in monospaced type, which are UNIX shell commands. They’re harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of running these commands, search this site for other discussions in which they’ve been used without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
To begin, launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search. A text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag -- do not type -- the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(x|postfix|ntp|cups)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item'
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Too Much Fan / Too much spinning Beach ball

Hi: My 10.4 iMac Desktop (with max 2 Gg SDRAM, and 50 Gig HD space still available) seems to be overworking, or something.
I get a lot of Spinning Beach ball , and quite a bit of fan work. My most common applications: Addres Book, Mail, Safari, Appleworks 6 (which seems to really stink now).
One perpetual problem (which I posted elsewhere): I can't BACK UP my ADDRESS BOOK. When I do, it leaves me with spinning ball of death for hours until Force Quit. Yuk.
I "Repair Disc permissions" monthly, and just checked/ Verified the HD from the original 10.4 Discs. All is aok.--no repairs needed.
Computer is 3 years old. Want to stay on 10.4 (I need to use Classic 9). But, are there some general or specific things I can do to keep my computer happy?
Thanks.

Hello,
You might want to check the drive for errors... you will need your system restore disk.
Testing and repairing a disk or volume
When you have problems with a disk or volume, use Disk Utility to test and repair it. Disk Utility also reports the S.M.A.R.T. status, which tells you whether your disk has hardware problems that will cause it to fail.
To repair a disk, you need an administrator's password. If you don't have one, ask an administrator to repair the disk with Disk Utility for you.
You can verify your startup disk with Disk Utility, but to repair it, you must start up your computer using another disk. For example, you can use your Mac OS X Install disk.
In addition, you cannot test or repair write-protected disks, nonrecordable CDs or DVDs, or disks with open files.
Close the files and quit the applications on the disk that you want to repair.
Open Disk Utility, and select the disk in the list on the left.
Click First Aid.
Check the S.M.A.R.T. Status at the bottom of the window. If you can't see the S.M.A.R.T. Status, be sure you selected the hard disk your volume is on, and not the volume itself.
If the S.M.A.R.T. Status is "About to Fail," back up your files on the disk as soon as possible and replace the disk.
If the S.M.A.R.T. Status is "Verified" or "Not supported," click Repair Disk to repair the disk.
If Disk Utility cannot unmount the disk, be sure you have quit any open applications and click Repair Disk again. If it still cannot unmount the disk, repair it just like you would repair a startup disk, by starting your computer from another disk, such as your Mac OS X Install disk.
If Disk Utility tells you to look for links to corrupt files in the DamagedFiles directory, some of those files are overlapping on your hard disk and are likely to be corrupt. Examine the affected files, each of which is listed in Disk Utility's output on a line that begins "Overlapped extent allocation". Most of these files have aliases in the DamagedFiles folder at the top level of the affected disk. If you can replace the file or recreate it, delete it. If it contains necessary information, open it and examine its data to make sure it has not been corrupted.
If Disk Utility cannot repair your disk or reports "The underlying task reported failure," try to repair the disk again. If that doesn't work, back up as much of your data as possible, reformat your disk, reinstall Mac OS X, and restore your backed up data. If you continue to have problems with your disk, it may be physically damaged and need to be replaced. See an authorized Apple dealer for more information.
Carolyn

Macbook pro has slowed considerably and spinning beach ball appears lots

My Macbook pro has slowed considerably and spinning beach ball appears lots recently.
After I installed 10.5.7 it started happening. When I open anything including system prefs and apple apps the ball appears. I'm on 10.5.8 and it seems to be either as slow or slower. Startup is a bit faster now, but it'll go to the beach ball before I even do anything remotely intensive on the system.
My computer is almost 3 years old but I don't install any weird software on it and have 30% of my system disk free. I'm an audio guy and use logic, pro tools and generally keep my computer clean.
I've tried starting another user account to check if its my original user that has the issue, but thats just as slow too.
Please help...
Thanks
Oh yeah, I repaired disk permissions too but it hasn't seemed to have changed anything

Thanks for the reply Dale.
I have just tried that and Disk Utility said my MAc HD appears to be ok....????
So I don't really understand what else I can do...
I tried using Onyx a couple of months ago but it seemed to make things worse and more temperamental.
If there is a next level of solutions I could try it would be much appreciated.
This is what appears when I verify or repair the permissions... I doesn't change if I repair them though.....
Verify permissions for “Macintosh HD”
Reading permissions database.
Reading the permissions database can take several minutes.
ACL found but not expected on "private/var/root/Library/Preferences".
ACL found but not expected on "private/var/root/Library".
ACL found but not expected on "private/var/root".
Permissions differ on "System/Library/CoreServices/AirPort Base Station Agent.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "Library/Application Support/ProApps/Internal Plug-Ins/BrowserKit/iLife.bkplugin/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "System/Library/PrivateFrameworks/BrowserKit.framework/Versions/A/CodeResources ", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/ProKit.framework/Versions/A/Resources/Leopard Panels.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "usr/lib/ruby", should be lrwxr-xr-x , they are drwxr-xr-x .
Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrw-rw-r-- .
ACL found but not expected on "Applications/TextEdit.app".
Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
ACL found but not expected on "Applications/Time Machine.app".
Permissions verification complete
Thanks for your help
Owen

My 2011 MBP has begun running slow with frequent 'spinning beach ball' events. I'm running Yosemite and wondered if I should of use the original install disk for maintenance.

My 2011 MBP has begun running slow with frequent 'spinning beach ball' events. I'm running Yosemite and wondered if I should of use the original install disk for a maintenance reinstall. I presume I'd have to download Yosemite again, though I'd be happy just using Snow Leopard again too.
Thanks for the help.

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

When I try to open pages 09 all i get is spinning beach ball. I have a lot of quotes i need to access but cannot. HELP!!!!!!

when I try to open pages 09 all i get is spinning beach ball. I have a lot of quotes i need to access but cannot. HELP!!!!!!
It has been fine up until this morning. Its stressing me out now as i may haveto retype loads.

Hi fruhulda, I am currently running 10.9.1
I have tried both ways. Generally I save a current quote to desktop and so open the programme by clicking on the quote thumbnail.
Thankys for your reply by the way.

Lots of Freezes and Spinning Beach Balls

Just recently my PowerBook G4 12" 1.42 began acting up. I can barely do anything without getting a screen freeze or spinning beach ball. I can't open folders, click or scroll, copy or paste, or almost anything without a very very long wait, up to several minutes of SWOD. Sometimes the screen won't do anything except move the mouse cursor.
I tried Disk Utility Repair Permissions, and it got hung up for about an hour and then the computer became unresponsive, and I had to shut down by holding the power button. I tried resetting PRAM with no luck.
I noticed the problem after the latest software update about 4 days ago. Up till then, all my software was updated pretty recently, within a few weeks.
Thanks for any ideas.

1. you have a 12" PB g4, which has been around since 10.2 or 10.3 Since then, how have you upgraded your OS? Was it an update, archive & install, or erase & install? if all your updates have been upgrades, it may be time to wipe your hard drive and start fresh. If there was any corruption with previous versions of OS X, they will be there when you upgrade.
From time to time, I completely erase my hard drive and reinstall everything. yes, it's a pain to do but i know that it will keep my computer running smoothly.
2. Your directory might be screwed up. You can try to fix it by rebooting your computer and when it's rebooting, hold down the Apple key (command) and the "S" key (command + S), which will boot you into Single User Mode. Type in "fsck -fy" (without quotes) at the prompt. This runs a file system check. If your directory is out of whack, this can fix it. You may have to run it a few times until it no longer reports any errors with the directory.
3. If your directory is really screwed up, I would suggest you buy Disk Warrior.
It sounds like your OS may be corrupted or your directory is screwed up.
Other things to check is to see how much available space is on your hard drive. If it's less than 2 gigs, this could explain why you are having problems.
hope this helps.

Slow and spinning beach balls after 10.8.2 update

After the initial install of ML 10.8 for the most part the sytem seemed to run fine. Very few snags. But after the 10.8.1 and now the 10.8.2 updates I am finding slower and slower times for programs to boot and waiting to be able to type anything and spinning beach balls all the time. I have noticed this continuously bringing up the contacts program, MS word, Pages, Apple Mail etc. Initial booting of the computer is slower as well and often has a frozen beach ball for a minute or so before it unfreezes and proceeds. Also huge slow down in printing from my wifi printer which before was super fast. I have reset the SMC, Pram, did disk permission repairs and all of those items. Nothing has changed anything. This is a early 15" 2011 MBP unit with 8 gig of ram, 750 gig hard drive with only 250 gig in use, 2.2 I7 processor and Graphics Intel HD Graphics 3000 512 MB. All software is updated to latest versions. This slower and slower and waiting thing is getting continuously worse all the time and very annoying. If anyone has any ideas I am open to suggestions to find a solution. Thanks much.

Seems we have a lot of people with simular problems but a lot of different combonations. Cleaning caches, reseting Pram, taking almost everything out of login items even using a program to defrag the unit, (mine is not a SSD drive), making sure all apps etc. are up to date and are ML ok etc. I have all done. I even had the unit tested by the Gen. Bar guys to make sure the hardware was ok including the drive even though I was pretty sure it was as I did not have this problem before ML. All checked out fine. I have not in the past had any problem with Time Machine backups but?????????? I only use a usb external and plug it in when I want to do a back up so it is not doing the backup thing all the time. I have thought of doing the erase and clean install which will be a huge amount of work but I have read many postings saying they have done that and it did not solve the problem so reluctant to do that if in the end I will spend two days for nothing? Could go back to SL or Lion as I have bootable backups but why should I have to do this on a year old MBP to make it work properly? Seems there ought to be a solution on this but Apple does not seem to have one? As I said in my original post all seemed good for the first month of ML then it began going down hill and has continued to ever since. I did notice last night that something strange seemed to help for a little while. I loged out of the unit as I have auto login and when I relogged in all seemed much quicker and better but today it has started to slow down again? I know everyone with this problem would like a solution!

Spinning beach ball of death - Error when running Chrome - kernel: IOSurface: buffer allocation size is zero

I get the following error when running Chrome v18.0.1025.163 on my MacBook Pro with MacOS 10.7.3
kernel: IOSurface: buffer allocation size is zero
I have had many tabs crash, then it crashes the Chrome application, then quickly making my entire Mac unresponsive with a spinning beach ball of death. I am not sure if it is Chrome or not, as I tend to do most of my work these days in a browser.
Have others seen this? Is there a fix? What can I do to stop these crashes?

As far as I've been able to discover, this bug is specific to WebKit browsers running (Chrome and Safari are based on WebKit). Perhaps it is related to those browsers running plugins (like Flash) and using an IOSurface to pass the rendering data back from the plugin. This issue was constant on my late 2010 MBP and would freeze the machine entirely once a day. Having switched to using Firefox or Opera I no longer see ANY messages for "IOSurface: Buffer allocation size is zero". Thankfully, this also comes without any more freezing when time machine starts up or at any other time.
It looks like there are a lot of changes going on in WebKit relating to IOSurface usage (http://svnsearch.org/svnsearch/repos/WEBKIT/search?logMessage=iosurface). Hopefully this will be fixed very soon.

Spinning beach ball for 45-60 seconds, then fine

For several months now, I've had the spinning beach ball issue on my Macbook Pro. Within the first 5 minutes after boot up, the spinning beach ball will occur, seemingly at random (no specific app or action), for 45-60 seconds. While this happens, the system becomes completely unresponsive. But after this occurrence within the first five minutes after startup, it never happens again and everything is fine - until I reboot of course.
I am running Snow Leopard and this problem was happening before I installed Snow Leopard, so that's not it. But one thing I did do, which I am semi-convinced is the culprit, is I replaced my hard drive with a Seagate 500 mb Momentus drive. The actual model # is SEAST9500420AS. I don't know for sure, but that's around the time this issue first started. I know there is/was a spinning beach ball problem with the newer Macbook Pros and they were attributing it to the hard drive which just so happens to be the same hard drive I now have in my Macbook Pro. There was recently an EFI update that seemed to fix the problem for the newer models, but mine is the first generation right when they went to Intel chips (bought mine in April, 2006). Problem is, if it is my drive, this new EFI update that fixes the issue on the new models won't install on mine.
I also did a verify disk and repair disk permissions, but that was no help. Another thing I found going through the discussion groups was that the problem could happen because both the Macbook Pro and the Seagate drive have anti-shock technology that could conflict with one another. So if you disabled the anti-shock on the Macbook Pro, it might solve the problem as it seemed to for some folks out there. But I did that and it didn't help either.
I'm thinking it's my hard drive, but don't know how to fix it. But it could be something I haven't looked at yet or thought of. I've been trying everything the last several months with no luck and it's been driving me batty! What's really strange is it only happens once and always within the first 5 minutes after start up. Anybody have any suggestions? Thanks.

I just finished doing lots of different tests to try to solve my problem. Didn't resolve it, but I did manage to eliminate some things and narrow it down further.
First I removed all my login items and restarted my computer. That didn't fix the problem.
So then I thought it might have something to do with Safari since that's one of the first things I open up when I start my computer and there are numerous reports in the discussions of spinning beach balls with Safari 4.0.3 which I have. So I purposely did not open Safari after startup. Problem still happened.
So then I thought maybe it has something to do with my internet connection. So I disconnected my internet connection and rebooted. Then I only opened programs that don't use online access. I leisurely opened up a program, did a few things in it, closed it, and then did the same thing with another program. Did some things with Finder. Purposely did not rush things. Waited 4-5 seconds after every operation's completion before executing another task. Never had more than one program open at any given time to eliminate any issue with two many resources open. You guessed it - the problem STILL happened. Not that it matters, but it happened when I hit Command-I on my hard drive icon to get the info pane. A fairly innocuous task. Froze up with the spinning beach ball for at least 45-50 seconds. Tried clicking a few other things while this was happening, but nothing. Once it freed up, a few things I clicked on previously suddenly became active and everything was fine again. Tried Command-I for a lot of different things with no problem. Response was instantaneous.
It pretty much happens 3-4 minutes into a session and then never happens again. And I think my test here eliminated several possibilities. Very frustrating. I hope this helps someone come up with a possible solution. Thanks.

Lots of spinning beach balls. MBP 3,1 OSX 10.8.2

Similar Messages

Maybe you are looking for