Lots of Warning 1706 logged on VMM 2008 R2 Sp1

Hi,
I have VMM 2008 R2 Sp1 server with 3 Hyper-V hosts connected. In VM Manager event log I have noticed lots of 1706 warnings:
"Job <Id> (Refresh virtual machine) failed to complete".
Is it anything dangerous for my servers? Should I troubleshoot it?

There are also "Job <Id> (Refresh host) failed to complete" 1706 warnings logged. Could anyone help me with this? How to troubleshoot this problem?

Similar Messages

How to move VMM 2008 R2 Sp1 server to new machine

Hello,
I need to move/migrate VMM 2008 R2 Sp1 installation (server, not database) to new machine. New machine has several different roles installed so backup/restore method is not possible. New server will have different name.There are also several Hyper-V hosts
and library servers connected to old VMM.
Do you have any good step-by-step for this?
Robert Mandziarz | IT Administrator:
CodeTwo
If this post helps resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others find the answer
faster.

Hi,
Thank you for your posting in Windows Server Forum.
From your description it seems that you have 50 RDS User CAL, if I am wrong then please correct it. If you are using RD User CAL then you can track per User CAL and also generate a report by
RD Licensing Manager. But for tracking RD User CAL, the system must be domain joined as it won’t work with workgroup mode. After creating report you can have the CAL details and to retain\migrate and activate again you need to contact MS clearing house.
Please check below article for more information.
Track the Issuance of Remote Desktop Services Per User Client Access Licenses
http://technet.microsoft.com/en-us/library/cc754625.aspx
Migrate Remote Desktop Services Client Access Licenses (RDS CALs)
http://technet.microsoft.com/en-us/library/dd851844.aspx
Hope it helps!
Thanks,
Dharmesh

Error 2915 in VMM 2008 R2 SP1

Hi,
I receive errors 2915 in VMM 2008 R2 SP1 while VMM tries to Refresh Host:
Error (2915)
The WS-Management service cannot process the request. Object not found on the host1.domain.lab server.
(Unknown error (0x80338000))
Recommended Action
Ensure that the agent is installed and running. If the error persists, reboot omicron3.jg2.local and then try the operation again.
My Hyper-V host: Windows 2008 R2 SP1 on HP DL380p G8.
I have tried solution from: http://support.microsoft.com/kb/976640 but with no luck. Could you help me with this problem?

Any help will be appreciated.

VMM 2008 R2 SP1 support SQL 2008 R2 SP2?

I plan to install service pack SP2 to SQL 2008 R2 SP1 which host OM and VMM Database. Does VMM 2008R2 SP1 support this version of the SQL server?
As i know OM2007R2 supportes SQL2008R2 SP2 since CU4.

Is SQL Server 2008 R2 SP1 supported on Windows Server 2008 R2 SP1? I've found this website
You have mentioned windows Server 2008 R2 SP1, it works and supported.
https://msdn.microsoft.com/en-us/library/ms143506(v=sql.105).aspx
If you are talking about Windows Server 2008 then you might need SP2
SQL Server 2008 R2 is not supported on:
Any version of Windows Server 2008 less than Windows Server 2008 Service Pack 2

Copy Templates from VMM 2008 to VMM 2012 R2

Hi,
I would like to know if it was possible to copy Templates from VMM 2008 to VMM 2012 R2 ?
Thank you

I have never tried this, but you can for sure re-use the physical objects like VHD's, ISO's etc.
The template configuration and profiles are metadata stored in the database.
Based on how things changed with VMM 2012 compared with 2008, you will have several new options and capabilites in the profiles for 2012.
I would recommend you to re-create those (hardware profiles, guest os profiles, application profiles etc) in 2012, as there is no logical mapping from the previous versions.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

VMM 2008 R2 error 2921

When attempting to
converts windows 2000 with SP4 physical machine to VM using VMM 2008 R2. I
receive this error. I am login domain admin account and make sure the account
has right on the folder. Why I get this message?
Error (2921)
VMM cannot complete the operation on the file
C:\Users\administrator.PAYROLL\AppData\Local\Temp\SCVMM.1fca7033e3\boot.wim on
the hsamgmtsvr01.hsapayroll.com server. One of the following system errors
occurred: a file is read-only, the specified path is a directory, or Virtual
Machine Manager does not have the required permissions.
Recommended Action
Ensure that the path is valid and VMM has the appropriate rights to perform
this action.<o:p></o:p>
Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Install and Configure Windows, VMware, Virtualization and Cisco on http://www.HowToNetworking.com

Hi Sir,
Please try to add VMM Service account to Local System admin account of source computer .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

ARC1: Warning. Log sequence in archive filename wrapped

Hi
we are using oracle10g 10.2.0.3 on windows 2000 server
we are getting ARC1: Warning. Log sequence in archive filename wrapped messages in alerlog
full messages is ARC1: Warning. Log sequence in archive filename wrapped
to fix length as indicated by %S in LOG_ARCHIVE_FORMAT.
Old log archive with same name might be overwritten.
what could be the reason?
Thanks
OH

user3308982 wrote:
Hi
we are using ARC%S_%R.%T
and we didn't change format
last few days we are getting this warning message
Thanks
With Regards
OHinstead of %S with %s on LOG_ARCHIVE_FORMAT,Then try again

RMAN-08120: WARNING: archived log not deleted, not yet applied by standby

i get RMAN-08120: WARNING: archived log not deleted, not yet applied by standby on primary
but when i run below query i get the same result from primary and standby
SQL> select max(sequence#) from v$archived_log;
MAX(SEQUENCE#)
44051
SQL>
standby is one log switch behind only!

i get RMAN-08120: WARNING: archived log not deleted, not yet applied by standby on primary You already have answer by post of Mseberg.
but when i run below query i get the same result from primary and standby
SQL> select max(sequence#) from v$archived_log;
MAX(SEQUENCE#)
44051
SQL>
standby is one log switch behind only!this is wrong query used on primary & standby. even if any one of archive gap available lets suppose sequence *44020* , this archive not transported to standby due to some network problem and so on. later if archives from *44021* all the archives transported on standby upto *44051* , then it shows the maximum sequence transferred to standby, It wont shows applied sequence.
Check the below queries.
Primary:-
SQL> select thread#,max(sequence#) from v$archived_log group by thread#;
Standby:-
SQL> select thread#,max(sequence#) from v$archived_log where applied='YES' group by thread#;
HTH.

Estimate time usage for doing an P2V in VMM 2008 R2

Hi
Is it possible to get a estimated time usage for doing a P2V in VMM 2008 R2?
Maybe a preliminary scan or something?
Lasse
/Lasse

Sadly no answers :-)
As far as I can see it's not possible to do a preliminary scan or something similar.
We did a P2V of a different server than the one in question which gave us an idea of the time needed.
Lasse
/Lasse

ARC0: Warning. Log sequence in archive filename wrapped

Hi,
I am having my production database(Oracle 11gR1) in windows 2003 server.
I am often getting below archive warnings in alert logs.
ARC0: Warning. Log sequence in archive filename wrapped
to fix length as indicated by %S in LOG_ARCHIVE_FORMAT.
Old log archive with same name might be overwritten.
1.Could any one tell the reason and how to resolve this?
2.Also i want to know the limitations of %s and %S in LOG_ARCHIVE_FORMAT?
my log_archive_format is set to string ARC%S_%R.%T

Vikash Jain (DBA Trainee) wrote:
Hi,
I am having my production database(Oracle 11gR1) in windows 2003 server.
I am often getting below archive warnings in alert logs.
ARC0: Warning. Log sequence in archive filename wrapped
to fix length as indicated by %S in LOG_ARCHIVE_FORMAT.
Old log archive with same name might be overwritten.
1.Could any one tell the reason and how to resolve this?
2.Also i want to know the limitations of %s and %S in LOG_ARCHIVE_FORMAT?
my log_archive_format is set to string ARC%S_%R.%T
Change log archive format to small(s) *%s* instead of *%S*
%S Specifies the log sequence number. This number is padded to the left by
zeroes. The default value is one with a range of up to five characters.
%s Specifies the log sequence number. The number is not padded. The default
value is one with no range limit on characters. also refer this link http://docs.oracle.com/cd/B19306_01/server.102/b14237/initparams103.htm

Can I add windows 2012 R2 host to VMM 2008 R2?

We are running VMM 2008 R2 on Windows 2008 R2. When attempting to add a Windows 2012 R2 as host to VMM, I receive this message:
Error (2915)
The WS-Management service cannot process the request. Object not found on the mdnjdqgxd2.xxxx server.
(Unknown error (0x80338000))
Can I add windows 2012 R2 host to VMM 2008 R2? If yes, what could be the problem?
Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Install and Configure Windows, VMware, Virtualization and Cisco on http://www.HowToNetworking.com

The VMM Server should never have the Hyper-V Role enabled.
The VMM 2008 can only be installed on 2012:
http://technet.microsoft.com/en-us/library/gg610562.aspx#BKMK_SupportedOS
You need to look at the support matrix of the SCVMM version and the Hyper-V Server Version.
http://technet.microsoft.com/en-us/library/gg610649.aspx
In this case it is beyond 'support' it is what actually will work.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

I have macbook pro and am on OS X Yosemite 10.10.2 . I am having lot of warning message on my browser that my computer is infected with malware/spyware and use mackeeper. How do I solve this issue . This is happening more on chrome and Safari browser

I have macbook pro and am on OS X Yosemite 10.10.2 . I am having lot of warning message on my browser that my computer is infected with malware/spyware and use mackeeper. How do I solve this issue . This is happening more on chrome and Safari browser

There is no need to download anything to solve this problem. You may have installed a variant of the "VSearch" ad-injection malware. Follow Apple Support's instructions to remove it.
If you have trouble following those instructions, see below.
Malware is always changing to get around the defenses against it. This procedure works as of now, as far as I know. It may not work in the future. Anyone finding this comment a few days or more after it was posted should look for a more recent discussion, or start a new one.
The VSearch malware tries to hide itself by varying the names of the files it installs. To remove it, you must first identify the naming pattern.
Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
/Library/LaunchDaemons
In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "LaunchDaemons" may open. Look inside it for two files with names of the form
          com.something.daemon.plist
and
           com.something.helper.plist
Here something is a variable string of characters, which can be different in each case. So far it has always been a string of letters without punctuation, such as "cloud," "dot," "highway," "submarine," or "trusteddownloads." Sometimes it's a meaningless string such as "e8dec5ae7fc75c28" rather than a word. Sometimes the string is "apple," and then you must be especially careful not to delete the wrong files, because many built-in OS X files have similar names.
If you find these files, leave the LaunchDaemons folder open, and open the following folder in the same way:
/Library/LaunchAgents
In this folder, there may be a file named
          com.something.agent.plist
where the string something is the same as before.
If you feel confident that you've identified the above files, back up all data, then drag just those three files—nothing else—to the Trash. You may be prompted for your administrator login password. Close the Finder windows and restart the computer.
Don't delete the "LaunchAgents" or "LaunchDaemons" folder or anything else inside either one.
The malware is now permanently inactivated, as long as you never reinstall it. You can stop here if you like, or you can remove two remaining components for the sake of completeness.
Open this folder:
/Library/Application Support
If it has a subfolder named just
           something
where something is the same string you saw before, drag that subfolder to the Trash and close the window.
Don't delete the "Application Support" folder or anything else inside it.
Finally, in this folder:
/System/Library/Frameworks
there may an item named exactly
            v.framework
It's actually a folder, though it has a different icon than usual. This item always has the above name; it doesn't vary. Drag it to the Trash and close the window.
Don't delete the "Frameworks" folder or anything else inside it.
If you didn't find the files or you're not sure about the identification, post what you found.
If in doubt, or if you have no backups, change nothing at all.
The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
          Install system data files and security updates (OS X 10.10 or later)
or
          Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

WARNING: archive log not deleted as it is still needed

Our Oralce Database is a single node database of version 10.1.0.
Dataguard/Standby is not configured.....we are executing the following command for archivelog backup
run
allocate channel c1 device type sbt;
backup archivelog all delete input;
This script is successfull in backingup all the archvied log files however it is not deleteing the input files. Instead it gives the warning....
"WARNING: archive log not deleted as it is still needed"
What could be the problem?

If you do a Metalink seach on "WARNING: archive log not deleted as it is still needed." you'll find a couple of documents that explain the issue.
The short answer is that RMAN has backed up logs which have not yet shipped to standby, so it won't delete them, cause they're still needed till they're successfully shipped to standby.
-Mark

Events 1863 and 2093 post SBS 2003 SP2 Migration to 2008 R2 SP1

I have migrated AD from a 2003 SBS SP2 server to a 2008 R2 SP1 server using the following article: http://technet.microsoft.com/en-us/library/dd379526.aspx
I realize now that this was not the right article as it is for 2003 SP2 Standard, however I don't need to migrate Exchange or other applications.
That was 3 days ago, yesterday morning I noticed the following events in the 2008 error log: Error 1863 and Warning 2093
There appears to be no issue with the domain currently, everyone was able to login in without issue this morning. Both servers are continuing to run, although I plan to demote the 2003 and decommission the hardware if there are no issues (as advised by the
post-migration instructions of the above article). I don't need the 2003 SBS server anymore, should I just transfer the FSMO's now and demote the server?
I can provide full text of the events, but I have removed identifying information:
Log Name:      Directory Service
Source:        Microsoft-Windows-ActiveDirectory_DomainService
Date:          2/17/2014 4:18:14 AM
Event ID:      1863
Task Category: Replication
Level:         Error
Keywords:      Classic
User:          ANONYMOUS LOGON
Computer:     SERVERNEW.generic.local
Description:
This is the replication status for the following directory partition on this directory server.
Directory partition:
CN=Schema,CN=Configuration,DC=generic,DC=local
This directory server has not received replication information from a number of directory servers within the configured latency interval.
Latency Interval (Hours):
24
Number of directory servers in all sites:
1
Number of directory servers in this site:
1
The latency interval can be modified with the following registry key.
Registry Key:
HKLM\System\CurrentControlSet\Services\NTDS\Parameters\Replicator latency error interval (hours)
To identify the directory servers by name, use the dcdiag.exe tool.
You can also use the support tool repadmin.exe to display the replication latencies of the directory servers.   The command is "repadmin /showvector /latency <partition-dn>".
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-ActiveDirectory_DomainService" Guid="{0e8478c5-3605-4e8c-8497-1e730c959516}" EventSourceName="NTDS KCC" />
    <EventID Qualifiers="49152">1863</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>5</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2014-02-17T09:18:14.599176800Z" />
    <EventRecordID>243</EventRecordID>
    <Correlation />
    <Execution ProcessID="504" ThreadID="660" />
    <Channel>Directory Service</Channel>
    <Computer>SERVERNEW.generic.local</Computer>
    <Security UserID="S-1-5-7" />
</System>
<EventData>
    <Data>CN=Schema,CN=Configuration,DC=generic,DC=local</Data>
    <Data>1</Data>
    <Data>1</Data>
    <Data>24</Data>
    <Data>System\CurrentControlSet\Services\NTDS\Parameters</Data>
</EventData>
</Event>
Log Name:      Directory Service
Source:        Microsoft-Windows-ActiveDirectory_DomainService
Date:          2/17/2014 4:18:14 AM
Event ID:      2093
Task Category: Replication
Level:         Warning
Keywords:      Classic
User:          ANONYMOUS LOGON
Computer:      SERVERNEW.generic.local
Description:
The remote server which is the owner of a FSMO role is not responding. This server has not replicated with the FSMO role owner recently.
Operations which require contacting a FSMO operation master will fail until this condition is corrected.
FSMO Role: CN=Schema,CN=Configuration,DC=generic,DC=local
FSMO Server DN: CN=NTDS Settings,CN=SERVEROLD,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=generic,DC=local
Latency threshold (hours): 24
Elapsed time since last successful replication (hours): 25
User Action:
This server has not replicated successfully with the FSMO role holder server.
1. The FSMO role holder server may be down or not responding. Please address the problem with this server.
2. Determine whether the role is set properly on the FSMO role holder server. If the role needs to be adjusted, utilize NTDSUTIL.EXE to transfer or seize the role. This may be done using the steps provided in KB articles 255504 and 324801 on http://support.microsoft.com.
3. If the FSMO role holder server used to be a domain controller, but was not demoted successfully, then the objects representing that server are still in the forest. This can occur if a domain controller has its operating system reinstalled or if a forced
removal is performed. These lingering state objects should be removed using the NTDSUTIL.EXE metadata cleanup function.
4. The FSMO role holder may not be a direct replication partner. If it is an indirect or transitive partner, then there are one or more intermediate replication partners through which replication data must flow. The total end to end replication latency should
be smaller than the replication latency threshold, or else this warning may be reported prematurely.
5. Replication is blocked somewhere along the path of servers between the FSMO role holder server and this server. Consult your forest topology plan to determine the likely route for replication between these servers. Check the status of replication using
repadmin /showrepl at each of these servers.
The following operations may be impacted:
Schema: You will no longer be able to modify the schema for this forest.
Domain Naming: You will no longer be able to add or remove domains from this forest.
PDC: You will no longer be able to perform primary domain controller operations, such as Group Policy updates and password resets for non-Active Directory Domain Services accounts.
RID: You will not be able to allocation new security identifiers for new user accounts, computer accounts or security groups.
Infrastructure: Cross-domain name references, such as universal group memberships, will not be updated properly if their target object is moved or renamed.

Hi JPowered,
Thank you for posting your issue in the forum.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Best Regards,
Justin Gu

Windows Server 2008 R2 SP1 RDS hang and stop responding new rdp session. Already connected session also hang as well

We have a Windows Server 2008 R2 SP1 RDS supporting many ThinClients, mostly using a mandatory profile on a Windows 2003 R2 AD environment
at the moment of the hang what we experienced was:
New RDP sessions got stucked in the legend "Iniciando" (we have the spanish MUI).
Systems Events shows a lot of Warnings:
The Group Policy Client Side Extension Group Policy Shortcuts may have caused the Group Policy Service to terminate unexpectedly. To prevent further failures in the Group Policy
Service, this extension has been temporarily disabled until after the next system restart. Group Policy settings managed by this extension may no longer be enforced until the system is restarted. The vendor of this extension should be contacted if this issue
recurs.
and after that a lot of this errors:
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the CryptSvc service.
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the NlaSvc service.
The RDP protocol component X.224 detected an error in the protocol stream and has disconnected the client.
timeout (30000 milliseconds) was reached while waiting for a transaction response from the Schedule service.
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the gpsvc service.
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the BITS service.
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the SessionEnv service.
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the ShellHWDetection service.
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the CertPropSvc service.
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the IKEEXT service.
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the iphlpsvc service.
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the SessionEnv service.
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the iphlpsvc service.
During the problem we ping DC and Network Share where Profile and Document Redirection resides and they were working OK (we also did a
\\server\HomeUsers and we reached it without problem)
Only reseting the server worked, Any Ideas of what could be causing this ?? Best Regards
Federico Giampietri Latamsupport IT Infrastructure Services

Hi Clarence,
Today we experienced the problem again,
Users can’t login to RDS, but now they got stucked at “"Please wait for the Group Policy client”;
System log events recorded the following errors again:
timeout (30000 milliseconds) was reached while waiting for a transaction response from the Schedule service.
timeout (30000 milliseconds) was reached while waiting for a transaction response from the sessionenv service.
timeout (30000 milliseconds) was reached while waiting for a transaction response from the ShellHWDetection service.
timeout (30000 milliseconds) was reached while waiting for a transaction response from the Wuauserv service.
timeout (30000 milliseconds) was reached while waiting for a transaction response from the BITS service.
timeout (30000 milliseconds) was reached while waiting for a transaction response from the CertPropSvc service.
What path do you suggest to investigate further?
Thanks a lot!
Federico Giampietri Latamsupport IT Infrastructure Services

Lots of Warning 1706 logged on VMM 2008 R2 Sp1

Similar Messages

Maybe you are looking for