Lotus integration
Hi,
We need to integrate Lotus Domino with our NW04SP09.
I found some documents regarding to Exchange integration but no useful documents about Lotus integration.
Is there any document, how-to guide, presentation about this issue?
Thanks in advance
Hi Damian,
you can find a lot of information here on SDN:
https://www.sdn.sap.com/irj/sdn/developerareas/ibm
incl. related documents like:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/single sign-on from sap enterprise portal to lotus domino.pdf
or
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/nw/ibm/an overview of ibm lotus integration with sap enterprise portal.pdf
and the eClass on Lotus Domino SAP Enterprise Portal integration in the section:
https://www.sdn.sap.com/irj/sdn?rid=/webcontent/uuid/41f6c15d-0501-0010-f7ab-ad78557988a7 ---> Intermediate Courses ---> SAP EP-Lotus Notes Domino Integration
Please see also:
http://service.sap.com/ibm or contact the SAP-IBM Collaboration Technology support center (CTSC) with "[email protected]".
Hope this helps,
Robert
Similar Messages
-
Hi.
Now my task is to integrate lotus notes into portal.
So I have url = "http://lotnot/customer.nsf"
And I have User = "Alexander Troshanin" and Password = "0123"
When I open page("http://lotnot/customer.nsf") using Intenet Brouser, first I enter User and Password!!! and then begin to work.
And I must create iView so that. When user(Atroshanin) enter into portal he could open this iView.
When he opens this iView - page("http://lotnot/customer.nsf") will be shown without authentication dialog!!!
So I read some docs and forums to this theme, but have some problems.
I understand that first it is necessary to make "System":
I go - System Administration->System Configuration->System Landscape
And here I try to create "System". One of the main things is that I don't know what type of system I must choose at first step.
At this forum, - Yoav said that system Type is not so important. He said that at first, system must have properties I that need.
So I choose first type "Dedicated Application Server for R/3 System".
When this system was created I edit two system propeties:
Logon Method = UIDPW
User Mapping Type = admin,user
And I made one aliase for this system, call it "mySystem".
Thats all I know what to do with System!!!
Then I made "User Mapping":
I go - User Administration->User Mapping
Here I choose User(Atroshanin), choose System(aliase = "mySystem") and entered userName = "Alexander Troshanin" and Password = "0123"
And made mapping.
At this step all is clear and understandable!!!
Then I must create iView.
At this forum, - Yoav said to Choose iView of type Application Integrator
I do it.
Then I set some properties of created iView:
Authentication Scheme = basicauthentication
System = "mySystem"
URL template = "http://lotnot/customer.nsf"
URL template fraction for Single Sign-On (SSO2) = "http://lotnot/customer.nsf"
URL template fraction for user mapping = <MappedUser>:<MappedPassword>@
Thats all I done. May be I must specify some other properties(in system/iView)???
But it is still not works.
Now I know that for "http://lotnot/customer.nsf" there is basic Authentication!!!
So when I look requerst at HttpTracer when I enter User/Password
there is
Authorization: Basic QWxleGFuZGVyIFRyb3NoYW5pbjpWaWtFZWNXbw==
thanks for looking.First you must create System:
in portal go: System Administration -> System Configuration -> System LandScape
here in wizard create New Ssytem.
Choose any system type you want(at first step of system creation), but when it will be created it must have Property Category - "User Management"
When system is created, open it and Choose Property Category User Management
Change Logon Method = UIDPW, User Mapping Type = admin, user
Then you must create System Aliase: right click on your system - Open -> System Aliases
Enter new Alias name and press Add;
Second you must make user mapping:
User Administration -> User Mapping
Select user
Select System(you will select alias, you specify before)
Enter User Name and Password for lotus System.
Press Save
At this step(when pressing save button) you could have problems. If they will be do such a thing:
In your portal go to 'System Administration' -> 'System Configuration' -> 'UM Configuration' -> 'Direct Editing'.
There locate the parameter 'ume.usermapping.unsecure', set it to 'TRUE' and restart your server.
And now last step:
go Content Administration -> Portal Content
Right Click on any Folder - New From Par -> iView
choose type = com.sap.portal.appintegrator.sap
choose Portal Component = Generic
specify iView name, id, id prefix
In tree choose your iView and edit attributes:
System, - enter system alias name you created before
URL template fraction for user mapping = <MappedUser>:<MappedPassword>@
URL template = http://<Authentication><your lotus base>
for example URL template can be:
http://<Authentication>lotnot/customer.nsf
thats all I have done to integrate lotus into portal!
Message was edited by: Alexander Troshanin -
Needed Screen Shots - Lotus integration in Portal
Hi All,
Can any provide me the screen shots or any video blog of Lotus (Domino,iNotes,Sametime) integration into Enterprise Portal server?
My Mail id is : [email protected]
Point will be provided to helpful Answers.
Thanks in Advance,
VinothHi Vinodh,
check the following blog which will guide you with screenshots how to configure LOTUS iNOTES
LOTUS iNOTES INTEGRATION INTO EP
plz reward poits if helps
cheers
dev -
Hi All,
I have to integrate Lotus Sametime on Windows Server with EP. I have installed all the dll files on the server and also verify.pse. I have created a system and mapped the user id and passwd with it. I have also created a Lotus Transport. But still it is not giving SSO to sametime. I have created iview with appintegrator.sap. Can u suggest where i am going wrong? Is there any specific type of system/iview to be used??
I'll b very grateful for your help. Reward points well.
ThanksDear Hari,
Can you please tell me which settings you have done that resolved your problem?
Is it a browser setting or url iview property settings?
Regards,
Bharat Mistry. -
Company for Lotus Notes Integration
Hello,
I'm searching for solutions to integrate Lotus Notes into Enterprise Portal.
I found much information about the You@Web Repository Manager for Lotus Notes, supplied by Conet.
This is the only company, I found.
Does anyone know another company with a solution for Notes integration, so that i can compare them?
Or is Conet the only one supplier?
Thanks in advance!
Best regards,
SvenHello Sven,
as far as I know and based on the SAP certification records CONET is the only company delivering a KM repository manager for Lotus Notes/Domino databases.
Despite the fact that the "old" SAP KM repman for Domino is technically limited to R5, the CONET repman also comes with more features and richer functionality (e.g. you can configur your distributed Lotus landscape / replication architecture for the Conet repman and other features).
Simply visit SAP TechED 2006 Session UPE106 and learn more on Lotus integration with SAP KMC.
Regards
Michael -
C4C & Lotus Notes integration for service users
Hi,
I tried to find information about C4C and Lotus Notes integration for service users without success. User manual says on Sales both Outlook and Notes, but in Service only Outlook. Does Lotus Notes add-in work for service users similar than sales users? Is there anywhere demo video for that? I can only found demo video for sales (SAP Sales OnDemand Outlook Integration Demo (new) - YouTube).
-AatosHi Aatos,
The Lotus notes integration currently supports the "Field Service" role in Cloud for Service where you are primarily servicing customers in the the field and have direct email communications with your customers. In this use-case, similar to "Field Sales" (AKA SFA Users) in Cloud for Sales, you can receive an email from a customer, get information about that customer from Cloud for Customer via the Lotus Integration, and be able to upload that email into Cloud for Customer as an email activity to track the email correspondence between the user and the customer.
However, the Lotus notes integration does not support the "Call Center" role in Cloud for Service where you are a contact center agent in a centralized service center processing emails that are routed into a common inbox and all correspondence is sent out in behalf of a central inbox such as [email protected] In this usecase all emails automatically create tickets and all emails both inbound and outbound are automatically recorded as email activities without customer or user intervention. The email client for this usecase is either a C4C email client or Windows Outlook Client as you found in the documentation.
Thanks,
Rei -
Connection Lotus Notes and ERP 2005
Hello experts!
I have some simple questions:
- What is the procedure to connect Lotus Notes and ERP 2005 (Do we need RFC-connects or RFC/BAPI?)
- Has the SAP Business connector still any supports?Hi,
There are couple Lotus integration products available from IBM (both pretty old but still will do the job):
<a href="http://www.thespot4sap.com/Articles/SAP_LN_Lotus_Notes_Introduction.asp">Pretty detailed blog</a>
<a href="http://www-128.ibm.com/developerworks/lotus/documentation/sapconnector/">IBM Documentation</a>
<a href="http://www.ibm.com/developerworks/lotus/library/lei-sap/">IBM Documentation on LEI</a>
They use RFC connectivity - check with IBM on support, from SAP perspective both should work.
SAP Business connector is being replaced with PI, but either are nothing to do with Lotus connectivity I think -
Conet Repository Manager for Lotus
Hi, guys.
We have to use the KM Repository Manager for Lotus Domino deliverd by Conet
which is based on Lotus Domino R6 and higher.
Does this mean we have to BUY the new Repository Manager from Conet
and get related implementation and configuration help from them too?Hello Sven,
as far as I know and based on the SAP certification records CONET is the only company delivering a KM repository manager for Lotus Notes/Domino databases.
Despite the fact that the "old" SAP KM repman for Domino is technically limited to R5, the CONET repman also comes with more features and richer functionality (e.g. you can configur your distributed Lotus landscape / replication architecture for the Conet repman and other features).
Simply visit SAP TechED 2006 Session UPE106 and learn more on Lotus integration with SAP KMC.
Regards
Michael -
Loading of Data from Lotus notes to CRM
Hai guys,
I need to upload the Prospects data and also the activites which we created with the prospects from the Lotus notes to the CRM
We have two lotus notes suppose X,Y from which we need to load the data. There might be some records which might be present in both X,Y.We dont want to duplicate the records.
Also we have defined Marketing Attributes X,Y.So now when we are uploading the prospects from X lotus notes all the prospects from the X lotus notes should have X in the Marketing Attribute.Same way as the prospects from Y
I dont have any previous experience loading the data to CRM.
So if you guys have any experience/clues/suggestions can you please share your knowledge.
Thanks in Advance
RGDSHello Taylor,
the Lotus integration tools provide the ability to read and write data from Lotus Notes/Domino to SAP and vice versa. Workflow is a special use case. The tools bascially read and write arbitrary data.
Even though I didn't experience CRM myself I still think that they may be suitable.
Feel free to contact me directly so that I can provide the contact persons to you.
Regards
Michael -
Hai to all
sir i need the details about km from the scratch as I am perfect in portal admin ,i want to learn and work on km.i need help from u forum people.
with regards
anithHi
Knowledge management in portals :
1>Get acquainted with iviews in portal pcds under content provided by SAP -->specialists.This iviews are often used .
2>KM repository framework concepts a pdf available in sdn as well in portal under java devlopment role navigate to KM wokset .
3>Navigate to KM content under content administration to find the repository which are used often for storage of data each repository has a specific task.
4>Important topics in KM are
ICE,WEBDAV,XML FORMS,Collaboration which includes creation of room templates,instant messaging, groupware integration like lotus integration,MS outlook integration etc you will find lot of helps in this area in SDN as well in help.sap.com
5>TREX
includes search using taxonomy for querybased and example based so you can have lots of articles using indexing,crawling ,etc in sdn
Hope this helps .please do not forget to give points
with regards
subrato kundu -
Hi community,
I am trying to integrate Cisco Unified Presence 8.6.1.10000-34 with IBM Lotus Notes 8.5.2 with the integrated Sametime Client version 8.0.2 via the Cisco Plugins 8.6.1.1185.
Phone control is working fine, whereas the presence status is not shown (= no handset symbol next to the Sametime user). When I look in the preferences of the plugin, I can see that the plugin has connected successfully to the CUCM (8.6.2.20000-2),whereas the connection to the CUPS has not been established.
The user id as well as the password are all the same on all systems. Here is a description of what I have configured via the ciscocfg.exe tool:
Feature Control:
- Enable Phone Status -> checked
- Enable Dial Using Cisco IP Communicator -> unchecked (not required)
- Enable Control Desk Phone -> checked
- Default Mode -> Control Desk Phone
Control Desk Phone Settings:
- Voicemail Pilot Number -> left blank (no voicemail)
- Cisco Unified Communications Manager
- Servers -> IP address of CUCM
- Read Only -> unchecked
- Use as Default CUCM -> checked
- Synchronize Credentials -> checked
- Use Sametime Credentials -> checked
Use Secure Connection: -> not required
LDAP Phone Attributes: -> not required
Phone Status Settings:
- Cisco Unified Presence Servers -> IP address of CUPS
- Read Only -> unchecked
- Synchronize Credentials -> checked
- Use Sametime Credentials -> checked
- Sametime User ID Mapping
- Use Business Card Attribute -> MailAddress
- Remove Domain -> checked
- Display Off-Hook Status Only -> unchecked
At the moment I don't see an error in the configuration, but maybe I am wrong. Could anyone please tell me what the error could be?
Thanks a lot in advance!
Kind regards,
IgorHi all,
here are some additions to my above post:
Servers and clients used:
1x CUCM 8.6.2.20000-2
1x CUPS 8.6.1.10000-34
1x IBM Lotus Domino Messaging Express Server 8.5.2
1x Sametime Entry Server 8.5.2 (on top of the Domino server)
2x IBM Lotus Notes 8.5.2 with integrated Sametime 8.0.2
2x Cisco Phone Control and Presence with Lotus Sametime (PCAP) 8.6.1.1185
2x Cisco Unified Personal Communicator 8.5.5.19839
Setup:
- CUCM, CUPS and CUPC are working fine, i.e. Desk Phone control via CUPC, as well as availability and presence status are working without issues
- IBM Lotus Domino server is the LDAP Directory, the Sametime Entry Server is installed on top of the Domino server and uses the Domino Directory
- User ID and password on CUCM/CUPS match the ShortName field and password in Domino
- The PCAP plug-in has been manually deployed to both Notes clients with the following configuration:
- Enable Phone Status -> active
- Desk Phone Control -> active
- no credential synchronization for CUCM and CUPS, i.e. every user must fill the user details himself
- Sametime User ID Mapping is implemented via the LDAP Attribute uid (which is equal to the user id in CUCM)
- LDAP configuration filled in with details of the Domino server
Phone Control is working fine, also the connection to the LDAP server (Domino) is fine. However, when I type in the credentials for the CUPS server login, I can see (in Troubleshooting pane) that the user (pparker) is connected to the CUPS server for a short period of time and then gets disconnected. After that no connection is possible to the CUPS server, i.e. status is always disconnected.
I have collected the Tomcat (EPASSoap00010.log and security00010.log) logs via RTMT and compared them to the logs from the PCAP plugin. The relevant time period is from 15:14 to 15:17. In the Tomcat logs I can see that the authentication is successful (see attached files), however in the log of PCAP plugin I can see the following messages:
2012/02/03 15:14:35.281 WARNUNG Credential is rejected. Nothing to retry ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.answerChallenge() ::thread=CT_CALLBACK.1 ::loggername=com.cisco.sametime.phonestatus.cup
2012/02/03 15:14:35.281 WARNUNG #### Connection rejected presence server ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.onPresenceServerConnectionRejected() ::thread=CT_CALLBACK.1 ::loggername=com.cisco.sametime.phonestatus.cup
2012/02/03 15:14:35.281 WARNUNG Credential is rejected. Nothing to retry ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.answerChallenge() ::thread=CT_CALLBACK.2 ::loggername=com.cisco.sametime.phonestatus.cup
2012/02/03 15:14:35.281 WARNUNG #### Connection rejected presence server ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.onPresenceServerConnectionRejected() ::thread=CT_CALLBACK.2 ::loggername=com.cisco.sametime.phonestatus.cup
I don't understand why the connection is rejected although the Sametime Internal ID and CUPS User ID match. Does anyone know what the issue could be?
All posts are very much appreciated!
Thanks a lot in advance!
Kind regards,
Igor -
Integration of SAP CRM 7.0 with Lotus Notes 8.5 ?
Hi,
Just wandering if anyone has integrated CRM 7 with Lotus Notes 8.5 successfully lately? I am runing into problem installing the Groupware Connector.
Aug 30, 2010 4:13:37 PM ...sap.gcn.Logger.trace(Logger.java:134) [Domino.R5.ConnectionSys-local-8] Error: java.lang.UnsatisfiedLinkError: no nlsxbe in java.library.path
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at lotus.domino.NotesThread.load(Unknown Source)
at lotus.domino.NotesThread.checkLoaded(Unknown Source)
at lotus.domino.NotesThread.sinitThread(Unknown Source)
at com.sap.gcn.dominor5.local.ConnectionSysHandlerLocal.init(ConnectionSysHandlerLocal.java:42)
at com.sap.gcn.dominor5.ConnectionAbstract$ConnectionAbstractThread.init(ConnectionAbstract.java:130)
at com.sap.gcn.dominor5.util.Adapter$AdapterThread.run(Adapter.java:136)
Aug 30, 2010 4:13:37 PM ...sap.gcn.Logger.trace(Logger.java:134) [main] Error: com.sap.gcn.ConnectorException: [ERR: 9]: Unspecified error: java.lang.IllegalThreadStateException: Thread is canceled
at com.sap.gcn.dominor5.ConnectionAbstract.close(ConnectionAbstract.java:62)
at com.sap.gcn.dominor5.GroupWare.releaseConnectionSys(GroupWare.java:563)
at com.sap.gcn.dominor5.GroupWare.initialize(GroupWare.java:100)
at com.sap.gcn.dominor5.ConnectionTest.testConnection(ConnectionTest.java:81)
Caused by: java.lang.IllegalThreadStateException: Thread is canceled
at com.sap.gcn.dominor5.util.Adapter.checkBridgeThread(Adapter.java:95)
at com.sap.gcn.dominor5.util.Adapter.invoke(Adapter.java:47)
at com.sap.gcn.dominor5.ConnectionAbstract.close(ConnectionAbstract.java:57)
Regards,
KevinCan you please try to do the following in the steps .
1) Search for the file nslbe.dll which can be in the folder c:\program files\notes . Add the location to the PATH variable in the environment variables.
2) Go to the installation folder for Lotus notes which might be c:\program files\Lotus\Notes\jvm\lib\ext . In this folder please put the following files Notes.jar,mail.jar,activation.jar, nslbe.dll. Please do take care that you will need to add the files in the folder ..\jvm\lib\ext
3) Add the ..\jvm\lib\ext folder location to your environment variables.
4) Create a environment variable JAVA_HOME and add the location of the jre-bin,lib and the JDK-bin,lib to this.
Restart your Server and the system where in you want to install the connector and try to run the installation again . -
Can we integrate Lotus quickr into ep 7 using application integrator
hi gurus,
can we integrate lotus quickr in to ep 7 (i.e sso) using appliction integrator or do we have any other way to do sso,
helpful replies are appreciated.
Thanks & Regards
K Naveen KishoreHi,
Tobias , thank you for you reply
yes it is ,Lotus Quickr is a DMS(document management system) which sits on Lotus Domino server.
i have done integrating Lotus quickr to ep 7,using application integration,
what i have done:
1)uploaded par file,
2)ceated system template,
3)created system using template,
4)then iview using par,
5)done usermapping
in iview in the property
URL Template Fragment for User Mapping : i have given
Username=<MappedUser>&password=<MappedPassword>
i took Username and password names from source of the login page of quicke
document.write("<input id=\"user\" class=\"text\" type=\"text\" name=\"Username\" />");
document.write("
<label for=\"password\">""Password:""</label>
document.write("<input id=\"password\" class=\"text\" type=\"password\" name=\"password\" />
document.write("
<input id=\"button\" type=\"submit\" name=\"login\" value=\"""Log In""\" />
when i cliclk on preview
finally page is displayed without user logedin, when i tried to login with this page with valid username and password same page is displayed .but when i tried with invalid username and password it is saying invalid username and password.
also as u said "Best way would be to configure Quickr to user Kerberos authentication" if possible send me the step by step guide for this.
Regards
K Naveen Kishore. -
Webcenter Spaces integration with Lotus Calendar, Sametime, Quickr
Hello all,
I'm working on a project which involves building an intranet Portal and the customer has Lotus 8.5 which wants to integrate in the Webcenter Spaces 11g "portal". More precisely they want to have in their portal the lotus calendar portlet, lotus mail portlet,lotus notes portlet, lotus sametime portlet ..etc. I found an old documentation and sample of this kind of portlets developed by Oracle but they don't work because of some errors when they try to retrieve the Lotus configuration. The documentation is this one : http://www.oracle.com/technology/products/ias/portal/point/lotusnotes/installation.html
I tried to find the authors of this documentation, or perhaps who developed the portlets and ask them if they can adapt the portlets for an integration between Webcenter Suite and Lotus Notes 8.5. If somebody knows about this topic or can help me with fixing the problem I have with the portlets please let me know - my e-mail is [email protected]
Thank you very much, your help is very much appreciated !Hello,
First of all let me thank you Brad, for taking the time to answer, it's very nice of you. After I read you post I spent a couple of hours searching for the installer of the recommended "WebLogic Portlets for Groupware Integration". After searching everywhere I could possible search : OTN, E-Delivery, Metalink, ias.us.oracle.com I could not find the installer of this portlets. In the Installation Guide it says : " 2. Download the software from the Oracle Software Downloads site. " - there is nothing related to Portlets for Groupware on OTN.
Now, I'm ashame but I have to give up, I guess perhaps this portlets for groupware integration are bundeled into some kit with a different name, I don't know, believe me I tried to find them, I searched the documentation but with no luck.
I would be very thankful if you can point me to the installer of this portlets. Thank you very much again ! -
Use X220 integrated Webcam with Lotus Sametime 8.5.1 video conferencing
Hello,
what is needed to use the integrated webcam together with Lotus Sametime?
When i try to test my environment / cam in Sametime there's a missing connection to an application.
Any idea on what is missing?
Regards
HorstThis integration is possible with using one 3rd party plug-in. Also you will get additional features such as :
Call forwarding
CTI
LDAP integration
Click-to-call and more..
K.T.Chamil Asanka
Maybe you are looking for
-
BCS New Item creation - Column with Name 'ID' does not exist.
Hello All I´m creating a BCS and i´m getting a strange error. I have created all the operations and created a list based on the external contente type. In my table the column ID is the primary key with identity. When I use the new item form I get the
-
Error while stating appl services in EBS R12..
Hi, When trying to start the application services using adstrtal.sh, we are getting the following error, adstrtal.sh: Database connection could not be established.Either the database is down or APPS credentials supplied are wrong. Regards,
-
i broke my iphone 4s screen, then i tried to fix and replace it by myself. unfortunately, i cannot do that correctly. i also damaged my wifi parts and shut off button. and my new screen is very hard to drive and use. i really want to repair those 3 p
-
CC desktop app not functioning properly
Whenever I try to download the Adobe Creative Cloud desktop app, it only installs the applications manager. How do I get the desktop app? I want to be able to sync files and whatnot. Thank you!
-
How to resurrect a dead iphone 4
I Have ordered an iphone6 ; not due in for another 10 days. Today my charged iphone 4 went silent. Can I force start this phone4? Thanks.