Lotus Notes 7.0.1/7.0.2 and SAP Business Workflow

Hi Everyone!
Please help me on this.
My client has received an email from IBM that they could have their SAP Connector free of charge if they are to upgrade their current Lotus connector ver5 to version 7.0.2. This version has included Workflow Integration as part of IBM's integration points with SAP.
Does anyone have an experience on integrating the two? Please share documents or procedures on how to integrate them.
My current configuration is intended for a 1-way communication integration.
I used the report RSWUWFML2 for sending notifications (though in my case, it only sends a message that there were workitems present in the recipient's SAP inbox). The SMTP configuration works fine. The client has not yet purchased the SAP connector.
If the SAP Connector is now available, the 2-way communication will be imposed.
I am planning to configure a 1-way communication integration where it could work either on a 1-way or 2-way communication. Is this possible?
Can I have a configuration (for sending of workitems to Lotus mail or internet mail) which could have a link that connects the recipient to the transaction for approval or workitem execution?
Thank you very much experts!!!
Best regards,
Reymar

Hi,
IBM Lotus Connector for SAP Solutions is a set of two technologies that can be used to integrate IBM Lotus Domino and SAP enterprise resource planning software.
Lotus Connector for SAP Solutions facilitates data transfer and access to SAP software from Lotus Domino.
Lotus Connector for SAP Solutions enables Lotus Notes mail users to receive summaries of SAP workflow items in their Lotus Notes in-boxes, from which the open work item can be launched with the click of a button.
The difference between IBM Lotus Connector for SAP Solutions and IBM Lotus Connector for SAP R/3 with MTA and Workflow is revision 1.7.2 of IBM Lotus Connector for SAP R/3 with MTA and Workflow.
Operating system platforms are supported by Lotus Connector for SAP Solutions with Lotus Domino 7 are supported on the following Lotus Domino 7 server platforms:
Microsoft Windows 2000 Server and Advanced Server
Microsoft Windows 2003 Server and Server Enterprise Edition
IBM AIX 5.2 and 5.3
Sun Solaris 9.0
Novell SuSE Linux Enterprise Server 8 and 9
IBM i5/OS V5R3 and V5R4
Releases of Lotus Domino are supported with Lotus Connector for SAP Solutions are Lotus Domino 6.x and higher and Lotus Enterprise Integrator 6.x and higher are supported
Releases of SAP software are supported with Lotus Connector for SAP Solutions
is version 1.7.2 supports SAP R/3 4.6 and higher, including SAP R/3 4.7 Enterprise and SAP ERP Central Component (ECC) 5.0.
Thanks and Regards,
Prabhakar Dharmala

Similar Messages

Lotus Notes and SAP Business Workflow

Hi Experts!
If you have an experience or if you have SPECIFIC notes on Lotus Notes/SAP Workflow integration, please share some views on these following questions:
1. The SAP version we are using is ECC6. The client wants to upgrade their Lotus Notes client to V7.0.1 which caters Workflow integration. Do we need to have the Lotus Connector for this? (Workitem should be processed using the Lotus Notes client and there is a link where the apporover can process the workitem.)
2. What are the essential technical specifications for this this integration?
 a. Domino Server Platform
 b. Client Platform
 c. Domino Release
 d. Lotus Notes Client version
 e. Product/connector for the link.
3. What should I use for configuring the notification scenario?
 a. Extended Notifications
 b. RSWUWFML2
 c. SWN_SELSEN
Please provide answers on these.
Thank you very much. I'm generous in giving points.
Regards,
Reymar

Hi Akshay!
Am I right to affirm that according to what you've said, there is no Lotus Notes Connector needed for Lotus Notes and SAP Workflow integration?
I actually haven't tested yet the Extended Notification, but from your reply, I think you are confident enough to tell me that it is possible to have a link in the Lotus Notes mail and then this link could bring you to the Document and process it using,of course, the Extended Notification.
I'm very thankful. Have a nice day. And also, please share some notes on how too use the Extended Notification. (--,)
Best Regards,
Reymar

Error:When adding RDC runtime library (Crystal report XI R2) to Lotus notes

Background : We have reporting feature implemented in one of lotus notes application using crystal reports 6 (OCX) and as Crystal report is going to be upgraded to CR XI version in my organisation, we need to implement the same using RDC component available in crystal XI . we have installed Crytal report XI R2 - SP 6 version for testing the integration.
we are referring a document available on SAP web site(attached below) that illustrates the steps required to integrate the Crystal Reports® Report Designer Component into a Lotus® Dominou2122 application. http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/509b02de-a81e-2b10-f598-822b6d6f2024?quicklink=index&overridelayout=true
Steps which have been outlined for adding runtime library in lotus domino application is shown below:-
1. In Domino Designer, add a Form to the application.
2. In the programmeru2019s pane, go to the (Declarations) handler of the Form and enter:
Dim App As Variant, Dim Rep As Variant
3. Select Create | Object and select the u201CControlu201D radio button in the u201CCreate Objectu201D dialog box that comes up. From the list of controls, select u201CCrystal Report Viewer Control.u201D This adds the control to the Form.
4. Click on the control and select Edit | Properties. In the u201CAppletu201D properties dialog, select the u201CSize object to fit windowu201D radio button and then close the properties dialog.
We are getting an error message while trying to add 'Crystal Report Viewer Control' control (illustated in Step 3 above) in the lotus notes form . Error message which we get is 'An error has occured while processing a request on an object'.
Alternatively , we created the object of Crystal Report Viewer on lotus notes form by adding viewer object file (Crviewer.dll) from the file system after selecting the u201CObject from a fileu201D radio button in the u201CCreate Objectu201D dialog box and added following code in the postopen event of lotus notes form .
Set m_Viewer = Source.GetObject("Crystal Report Viewer Control")
Set App = CreateObject("CrystalRuntime.Application")
Set Rep = App.OpenReport(u201Cc:lotus
otes
ep.rptu201D)
Set m_Viewer.ReportSource = Rep
Again, when lotus notes form is opened , it gives error 'Variant does not contain object' at 'Set m_Viewer.ReportSource = Rep' .
Can any one suggest us any workaround or if iit is not possible in CR XI R2 into a Lotus® Dominou2122 application. Also, can any one provide us sample code if CR 2008 version can be integatred with lotus notes.

I believe, Lotus was never a "supported" development platform, though it did work - at one time or another. Eventually it did not and you are at that point. I think it was CR 10 where it started to be impossible to add the viewer to Lotus. This was never fixed and we never did find out if this was a Lotus thing or a CR thing.
Re. CR 2008 and Lotus. The RDC has been retired in CR 2008, so no luck there either for you. The only SDKs available in CR 2008 are for .NET and Java.
Ludek

Is RDC integration with Lotus notes apps possible using CR XI and lotus 8

Hi,
We have reporting feature implemented in one of lotus notes application using crystal reports 6 (OCX) and as Crystal report is going to be upgraded to CR XI version in my organisation, we need to implement the same using RDC component.
Background (on how it has been implemented using CR 6 ) :-
i) Lotusscript generate few CSV file and pick a .RPT file from profile doc and places it under one folder on local machin (say x).
ii) RPT file is designed to pick data from CSV file using system DSN (data source).
iii) Data source (system DSN) has been configured with folder (x) that contains CSV and RPT file .
iv) Crystal report control object has been embedded in the lotus notes form and lotusscript code gets handle of control object and opens the report (RPT)file .
We have set up all neccesary environment and trying to implement above functionality using RDC component but when we are embedding the crstal report report viewer in a lotus notes form , it throws an error "An error has occured while processing a request on an object".
Please let me know if it possible using RDC or can anyone suggest me some other alternatives .
TIA

Hello,
You should be able to use the RDC in Lotus Notes. There are significant differences between the object model for the old OCX (crystl32.ocx) compared to the Report Designer Component (RDC) and it's components, the craxdrt.dll, crviewer.dll, etc.
I was able to find an older document that shows how to integrate CR9 into Lotus Notes: "[Using the Report Designer Component (RDC) in Lotus Notes|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/50ce64b3-241f-2b10-b792-9685d3815a21]". You can use this as a starting point to compare with your code.
The RDC object model hasn't changed much since CR9, but some of the runtime component references in the document may need to be correct (e.g. craxdrt.dll for v11.x vs craxdrt9.dll for v9.x).
It is worth noting that the RDC has been retired with the release of CR2008. CR XIR2 (v11.5) is the last version of Crystal Reports that uses the RDC. The suggested migration path is to move to the Crystal Reports .NET SDK. This means you'll have no upgrade path with a v11.x application.
Sincerely,
Dan Kelleher

Lotus Notes Portlet

I have been having similar problems as forum messages # 520072 &
524480 (ref. below). my only difference is that in the apache
error log I get the following:
java.net.MalformedURLException: unknown protocol: https
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.io.IOException.<init>(Compiled Code)
at java.net.MalformedURLException.<init>(Compiled Code)
at java.net.URL.<init>(Compiled Code)
at java.net.URL.<init>(Compiled Code)
at
sun.net.www.protocol.http.HttpURLConnection.followRedirect
(Compiled Code)
at
sun.net.www.protocol.http.HttpURLConnection.getInputStream
(Compiled Code)
at java.net.URL.openStream(Compiled Code)
at lotus.domino.NotesFactory.getIOR(Compiled Code)
at lotus.domino.NotesFactory.createSession(Compiled Code)
at
oracle.lotus.application.ApplicationLogin.authenticateUser
(Compiled Code)
at oracle.lotus.application.ApplicationLogin.performLogin
(Compiled Code)
at oracle.lotus.application.LotusProvider.process
(Compiled Code)
at oracle.lotus.application.ExternalServlet.doGet
(Compiled Code)
at oracle.lotus.application.ExternalServlet.doPost
(Compiled Code)
at javax.servlet.http.HttpServlet.service(Compiled Code)
at javax.servlet.http.HttpServlet.service(Compiled Code)
at org.apache.jserv.JServConnection.processRequest
(Compiled Code)
at org.apache.jserv.JServConnection.run(Compiled Code)
at java.lang.Thread.run(Compiled Code)
Our Lotus notes web sever is running HTTPS (on a Sun Box) and
the portal (v3.0.9x) is running on Sun Solaris 8. And like the
others, I have followed the Oracle doc on creating a Lotus
Portlet to the letter. But, I'm at a lost since I can not find
a resolve for the error or what it really means. I've searched
MetaLink and Technet and even put in a TAR (which Oracle said
they do not support their own demo portlets - thanks a lot :^
( ) Any insight to this problem would be great.
thanks,
kurt
reference msgs:
**part of msg #524480
I am trying to install these portlets from the PDK and am having
problems. Looked through all other threads relating to these
portlets and have not found a the answer to my problem.
I have followed instructions to the letter and can access
mailbox in browser by using http://
[lotus_host]/mail/mailbox.nsf.
Having set up the External Application as instructed, when I
attempt to logon to the application, I am presented with a page
headed Lotus with the five input fields from the previous form,
Username, Password, MailFilename, MailServer, Hostname. When I
complete these fields nothing seems to happen.
part of msg #520072
Using the downloaded Java PDK framework and the Lotus Notes zip
file, I have successfully configured and tested the 'sample'web
provider.
I then configured the apache configuration files
jserv.properties and zone.properties for Lotus Notes (as
described in the Lotus Notes Portlets help file.
All went well until I got to Registering the Provider with
Oracle
9iAS Portal :
I got as far as the Input form for the Lotus Notes Inbox (i.e.
clicking on the hyperlink for the external application).
This form asks for Username, Password,Mailfilename, Mailserver
and Hostname.
The form is headed 'LOTUS', the only other item on the Form
being the 'Submit' button.
When I submit the form the entries are cleared (returning an
empty input form as before) but nothing happens.

If you check out the thread from my question (524480), we found
that we had to enable the IIOP task on the domino server as we
were not running it, this cured the problem I think you are
encountering.
This has not solved all our problems as I only see Notes data in
the Inbox Portlet Preview mode, this problem is refered by other
contributors as the collapsing Portlet problem (496625) and I do
not know whether there is a solution to this problem yet.
Hope this helps.

Lotus Notes Missing in Drop Down List for Calendar Synch

Hello there,
   A) I am attempting to synch my blackberry tour with my calendar in Lotus Notes 8.5.2. I was able to previously synch my calendar when I had Lotus Notes 8.5.1, but since our upgrade to 8.5.2, I get an error saying it could not find a supported version of Lotus Notes.
B) When I try to go in and configure the organizer section of the desktop software, there is no option for the drop down list for Lotus Notes. I have tried uninstalling, rebooting and then reinstalling (based on info from other posts), but none of that seems to work. I have checked and all the connectors are there, but for some reason, they are not being recognized. Is there some specific key or file that intellisynch is looking for to know that Lotus Notes is installed on the machine?
Now, I am assuming A&B are symptoms of a common problem, but I am at a loss as to how to move forward. Any ideas on how I can get this software to recognize Lotus Notes? I appreciate any help you can give.
Thanks,
Rick

While calling method SET_TABLE_FOR_FIRST_DISPLAY pass 'A' to paramater I_SAVE .
CALL METHOD grid1->set_table_for_first_display
      EXPORTING i_structure_name = 'SFLIGHT'
                is_variant       = gs_layout
                i_save           = 'A'
                i_default        = p_def
      CHANGING it_outtab        = gt_sflight.

Does OIM Connector for Lotus Notes support Domino certification authority?

Lotus Notes allows an Organization to register servers and users without stamping each server ID and user ID if you have migrated the certifier to a Domino server-based certification authority (CA).
A Customer has done such a migration to a server-based certification authority (CA), and therefore they have set up Notes and Internet certifiers to use the CA process.
So, now this Customer does not require access to the certifier ID and ID password.
Having enabled certifiers for the CA process, they can now assign the registration authority role to administrators, who can then register users and manage certificate requests without having to provide the certifier ID and password.
My question is: is this compatible with the requirements of Oracle Identity Manager Connector for IBM Lotus Notes and Domino Release 9.0.4, that, among other parameters, requires to specify CertPath (Complete file specification of the certifier ID to be used when creating certifier ID files) and CertPwd (Password of the certifier ID file)?
Regards,
Angelo Carugati

I quite new with OIM, but not at all... For sure, I need to configure a connector for Lotus Notes / Domino.
The main points in my question are (USING A connector for Lotus Notes / Domino):
- How can I create 1 user account (and related data), on different servers (IT Resources), with different "mail templates", when the data should be the same, and the user mail database, should only be a replica on the the 2nd server
- Maybe, I need to configure 2 distincts IT Resources, and run both (through Provisioning Policies), when I need to provision a user, as described in my scenario (above), right?
- In the 2nd server, I dont want the user to be created with a new mail database (neither new user data, as shortName, IDfile... ).
I want that same data, and a replicated mail DB is generated on the 2nd server (webmail server)
Is it possible, how can I configure this within OIM connector for Lotus Notes / Domino?

Is there a way to transfer my lotus notes address book to my iPad?

Is there a way to transfer my lotus notes address book to my iPad?

You can sync your Lotus Notes contacts to Google with Awesync tool, and then sync them to iPad:
http://support.google.com/a/users/bin/answer.py?hl=ru&answer=138740
or
http://www.iskysoft.com/apple-ipad/sync-google-contacts-with-ipad.html

Lotus Notes Connector: Resource is provisioned but the Create User task...

Hi,
I am getting some problems with the Lotus Notes Connector. The resource is provisioned but the Create User task is rejected. In the Lotus Notes server log, there is no problem and the account was created successfully.
Below is the response OIM has set to the task:
Respuesta: ERROR_UNID_SET
Descripción de Respuesta: User created successfully. Error while updating user unique attribute in the process form.
Notas:
As you can see below, there was no error when the adapter was executed:
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvisionsetPropertyEntered method
INFO [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::loadAttributeMapping: START
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision: :loadAttributeMapping : Attribute Mapping file : C:\oracle\oim9101\xellerate/XLIntegrations/LotusNotes/config/attributemapping_prov.properties
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvisiongetParsedPropertiesEntered method
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvisiongetParsedProperties---- END
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : CreateMailDb true
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : ShortName
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : SecurityType 1
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MailSystem 0
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : Storeaddbook true
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : SynchInternetPwd true
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : InternetAddress
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : CertifierIDFile C:\Lotus\Domino\Data\cert.id
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : Registrationlog
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MailOwnerAccess 0
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MinPwdlen 8
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : Addbook true
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : RegistrationServer win2k3base/oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : OrgUnit during create -- oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : OrgUnit oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MailQuotaWarning 40
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : Received null values for ExpirationDate:
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::getDefaultDate : Setting Default date
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : IdType 173
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MailTemplateName
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MailQuotaLimit 50
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : LastName : Gerente
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : IdFilePath : C:\Lotus\Domino\id
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MailServer : win2k3base/oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : FirstName : Teste
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : Comment :
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MiddleName :
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : Location :
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MailDBPath : mail\
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : ForwardDomain : oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvisioncheckUserExistsEntered method
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::getUserName: Org Unit: oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::getUserName: Final UserName --- CN=Teste Gerente/OU=oimdev/oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvisioncheckUserExistsExiting method
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::getUserName: Org Unit: oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::getUserName: Final UserName --- CN=Teste Gerente/OU=oimdev/oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : User Name: CN=Teste Gerente/OU=oimdev/oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : Full Name: CN=Teste Gerente/O=oimdev
INFO [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : User Created Successfully
INFO [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::triggerAdminP : Invoking trigger AdminP
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::triggerAdminP : MailServer : win2k3base/oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::loadAdminpProperties : AdminP properties file : C:\oracle\oim9101\xellerate/XLIntegrations/LotusNotes/config/adminP.properties
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::triggerAdminP : AdminPCommand : tell adminp process all
I've retried the Create User task and got the Lotus Console messages below. There is no error:
10/20/2009 02:02:56 AM Admin Process: Checking for all requests to perform
10/20/2009 02:03:30 AM DIIOP Server: 192.168.200.6 connected
10/20/2009 02:03:36 AM Opened session for win2k3base/oimdev (Release 6.5.6)
10/20/2009 02:03:36 AM Closed session for win2k3base/oimdev Databases accessed: 2 Documents read: 0 Documents written: 0
10/20/2009 02:03:37 AM Certifying Teste Gerente/oimdev
10/20/2009 02:03:48 AM Opened session for win2k3base/oimdev (Release 6.5.6)
tell adminp process all >C:\DOCUME~1\ADMINI~1.WIN\LOCALS~1\Temp\rem22706.con
10/20/2009 02:03:49 AM Admin Process: Checking for all requests to perform
10/20/2009 02:03:49 AM Remote console command issued by win2k3base/oimdev: tell adminp process all
10/20/2009 02:03:49 AM Closed session for win2k3base/oimdev Databases accessed: 0 Documents read: 0 Documents written: 0
10/20/2009 02:03:49 AM DIIOP Server: 192.168.200.6 disconnected
Any suggestion?
Edited by: Renato.Guimaraes on 19/10/2009 21:04

Sunny,
I figured out the problem... Wrong configurations. See what I did:
a) Reviewed the explanation below about the paramater certifierOU of Lotus Notes ITRes, so I set it to empty.
certifierOU Specifies the OU of the certifier to be used when creating user accounts If you use a certifier on the target system, then you must specify the certifier OU value. If
you do not have a certifier on the target system, then leave this parameter field empty.
If there are multiple certifiers on the target system, then you must create one IT resource (of the Lotus Notes IT resource type) for each certifier. Refer to Oracle Identity Manager
Design Console Guide for information about creating IT resources. If you specify a value for the certifierOU parameter, then the user OU value that you specify on the process form is ignored during the creation of a DN for a new user account.
If you do not specify a value for the certifierOU parameter, then the user OU value that you specify on the process form is used in the DN. This feature ensures that only one OU value
is included in the DN.
If you specify a value for the certifierOU IT resource parameter, then user records for which the certifier OU value in the DN does not match the certifierOU parameter value are not
reconciled. This is because the user DN is used to match records in the target system and Oracle Identity Manager, and a difference in the certifier OU value would lead to a
mismatch in DN values. The following example illustrates this type of scenario:
Suppose a user account on Lotus Notes has the following DN:
CN=John Doe/OU=testcertou/O=test/C=US
If testcertou has not been assigned as the value of the certifierOU parameter for any of the IT resources created on this Oracle Identity Manager installation, then the records of this
user cannot be reconciled into Oracle Identity Manager.
Sample value: NY
b) The MailServer paramater was win2k3base/oimdev and I've changed it to CN=win2k3base/O=oimdev.
c) As the certifierOU is clear now, so I have to inform the Orgnation Unit field in the process form.
Thanks.
Edited by: Renato.Guimaraes on 24/10/2009 23:19
Edited by: Renato.Guimaraes on 24/10/2009 23:27

Lotus Notes doesn't synchronised with Nokia 6233

Hello!
There are my details:
Nokia 6233
Windows XP sp2
PC suite 6.83.14.1
Connection method: Bluetooth
Aplication Lotus notes 6.5
Connection is established, calendar items are successfully synchonised, but not contact items. I think that problem is in Synchronisation settings (Tab Lotus Notes 6.x there are Group Contacts and two fields below "Server" and "Filename" ), the value of "filename" field i put "mail\mstetjuh.nsf", where "mstetjuh" is my account namme. Synhronisation report writes that all successfully finished.
Help me where I am wrong, please.

Sorry, I didn't reed corectly. I put as you sad and all is gone. Big thanx

No Reply option available for Meeting Invite from Lotus Notes

Upgraded to a 8310 and now my Lotus Notes Calendar appointments don't synch properly and all meeting invites are treated as emails. So no Reply or Decline function.
Has anyone experienced this? Have searched the web and no results.
My local IT want to wipe my phone and start again. I just got it the way I like it!

Hi and Welcome to the Forums!
Is your Notes email integrated to your BB via BES? If so, then your BES admins really are in complete control of it. But, perhaps this will help them?
http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB15609&slic...
Hope that helps.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Recommend a Sync software for my TX and Lotus Notes 8

I was wondering what the general consensus was about which software I should use to sync my TX with Lotus Notes 8. I have tried Pylon and it really sucks - lots of bugs. I'm wondering if EasySync Pro works any better? Thanks in advance for your help!
Post relates to: Palm TX

It's a Lotus Notes bug. You have to get an update from them. The update is called "Lotus Notes 852 FP2 SHF191 W32 standard".
Technical details: Password Manager uses a window hook to capture/input passwords in windows applications. The presense of a window hook exposes this bug in Lotus Notes. We worked with Lotus during August 2011 to solve the bug in their software.

Cisco Phone Control and Presence 8.6.1.1185 with IBM Lotus Notes 8.5.2 (Integrated Sametime Client 8.0.2) - No presence status visible

Hi community,
I am trying to integrate Cisco Unified Presence 8.6.1.10000-34 with IBM Lotus Notes 8.5.2 with the integrated Sametime Client version 8.0.2 via the Cisco Plugins 8.6.1.1185.
Phone control is working fine, whereas the presence status is not shown (= no handset symbol next to the Sametime user). When I look in the preferences of the plugin, I can see that the plugin has connected successfully to the CUCM (8.6.2.20000-2),whereas the connection to the CUPS has not been established.
The user id as well as the password are all the same on all systems. Here is a description of what I have configured via the ciscocfg.exe tool:
Feature Control:
- Enable Phone Status -> checked
- Enable Dial Using Cisco IP Communicator -> unchecked (not required)
- Enable Control Desk Phone -> checked
- Default Mode -> Control Desk Phone
Control Desk Phone Settings:
- Voicemail Pilot Number -> left blank (no voicemail)
- Cisco Unified Communications Manager
     - Servers -> IP address of CUCM
     - Read Only -> unchecked
     - Use as Default CUCM -> checked
     - Synchronize Credentials -> checked
          - Use Sametime Credentials -> checked
Use Secure Connection: -> not required
LDAP Phone Attributes: -> not required
Phone Status Settings:
- Cisco Unified Presence Servers -> IP address of CUPS
- Read Only -> unchecked
- Synchronize Credentials -> checked
     - Use Sametime Credentials -> checked
- Sametime User ID Mapping
     - Use Business Card Attribute -> MailAddress
     - Remove Domain -> checked
- Display Off-Hook Status Only -> unchecked
At the moment I don't see an error in the configuration, but maybe I am wrong. Could anyone please tell me what the error could be?
Thanks a lot in advance!
Kind regards,
Igor

Hi all,
here are some additions to my above post:
Servers and clients used:
1x CUCM 8.6.2.20000-2
1x CUPS 8.6.1.10000-34
1x IBM Lotus Domino Messaging Express Server 8.5.2
1x Sametime Entry Server 8.5.2 (on top of the Domino server)
2x IBM Lotus Notes 8.5.2 with integrated Sametime 8.0.2
2x Cisco Phone Control and Presence with Lotus Sametime (PCAP) 8.6.1.1185
2x Cisco Unified Personal Communicator 8.5.5.19839
Setup:
- CUCM, CUPS and CUPC are working fine, i.e. Desk Phone control via CUPC, as well as availability and presence status are working without issues
- IBM Lotus Domino server is the LDAP Directory, the Sametime Entry Server is installed on top of the Domino server and uses the Domino Directory
- User ID and password on CUCM/CUPS match the ShortName field and password in Domino
- The PCAP plug-in has been manually deployed to both Notes clients with the following configuration:
     - Enable Phone Status -> active
     - Desk Phone Control -> active
     - no credential synchronization for CUCM and CUPS, i.e. every user must fill the user details himself
     - Sametime User ID Mapping is implemented via the LDAP Attribute uid (which is equal to the user id in CUCM)
     - LDAP configuration filled in with details of the Domino server
Phone Control is working fine, also the connection to the LDAP server (Domino) is fine. However, when I type in the credentials for the CUPS server login, I can see (in Troubleshooting pane) that the user (pparker) is connected to the CUPS server for a short period of time and then gets disconnected. After that no connection is possible to the CUPS server, i.e. status is always disconnected.
I have collected the Tomcat (EPASSoap00010.log and security00010.log) logs via RTMT and compared them to the logs from the PCAP plugin. The relevant time period is from 15:14 to 15:17. In the Tomcat logs I can see that the authentication is successful (see attached files), however in the log of PCAP plugin I can see the following messages:
2012/02/03 15:14:35.281 WARNUNG Credential is rejected. Nothing to retry ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.answerChallenge() ::thread=CT_CALLBACK.1 ::loggername=com.cisco.sametime.phonestatus.cup
2012/02/03 15:14:35.281 WARNUNG #### Connection rejected presence server ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.onPresenceServerConnectionRejected() ::thread=CT_CALLBACK.1 ::loggername=com.cisco.sametime.phonestatus.cup
2012/02/03 15:14:35.281 WARNUNG Credential is rejected. Nothing to retry ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.answerChallenge() ::thread=CT_CALLBACK.2 ::loggername=com.cisco.sametime.phonestatus.cup
2012/02/03 15:14:35.281 WARNUNG #### Connection rejected presence server ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.onPresenceServerConnectionRejected() ::thread=CT_CALLBACK.2 ::loggername=com.cisco.sametime.phonestatus.cup
I don't understand why the connection is rejected although the Sametime Internal ID and CUPS User ID match. Does anyone know what the issue could be?
All posts are very much appreciated!
Thanks a lot in advance!
Kind regards,
Igor

Lotus Notes - email no longer converting

I am no longer able to successfully create pdfs (from either individual emails or folders) using the Acrobat toolbar button or the Acrobat choices added to the dropdown menu. All I receive now is "failed to convert" messages with no real information.
IT assures me that there have been no changes in Lotus Notes at our organization and I do not see anything from Adobe updates that could cause the problem.
I can still print choosing Adobe PDF as my printer, but this does not preserve attachments, a critical requirement for me.
Please help. This was an excellent way for me to archive and search my email.
Adobe Acrobat Pro 8.latest
Windows XP
Lotus Notes 6.5

There are no possible triggers that I know of. I was archiving my email once a month, give or take a week, so the timeframe for potential unwanted changes is long.
During that time I know there were Adobe product updates for my CS3 which I allowed. Also, our IT group can push out software updates remotely for Lotus Notes and other software, so all I have is their assurance that nothing changed.
This issue is happening for all mail items, for both the inbox and my user created folders.
Our Lotus Notes administrators will not support non-Notes software and our on-site IT was essentially out of ideas after the reinstallation did not solve anything.
I did find a non-Adobe workaround to export my email to Thunderbird (portable version) so I can at least have a way to archive and get my email off the system and server, but the Acrobat archive was much more efficient.

Is RoboHelp HTML 7 incompatible with Lotus Notes?

Has anyone noticed incompatibility between Lotus Notes mail
v6.1 and RoboHelp HTML v7.0? I've had LN installed for the lifetime
of this computer, ~3 yrs, and have worked with RH 7.0 for ~2 mns.
Just this week, I've had three instances of LN not opening after I
managed to crash RH. Rebooting worked the first time: the 2nd time,
I had to re-install LN; the 3rd time, rebooting worked.

Until Notes.6, I always suspected something was going on
between the two.
For many months, I haven't had any RH crashes I could blame
on LN.
If LN is doing any automatic stuff, try turning it off. Or,
as a test, close LN before you launch RH. Any crashes after that?
Automatic stuff means checking for new mail, alterting you
when new mail arrives, Calendar reminders, and so on.
I know, that's what LN is for, but you might find something
that always eluded me. For example, I turned off the new mail alert
long ago, but I can't prove a link.
Good luck.
Harvey
P.S. I should mention that sometimes I have LN and RH running
at the same time on one machine, but mostly I run them on separate
PCs. Still, I can't prove a link.

Lotus Notes 7.0.1/7.0.2 and SAP Business Workflow

Similar Messages

Maybe you are looking for