Lotus Notes 8.5 missing in IntelliSync List

Hey all,
since I use the new Version of Lotus Notes i'm not able to sync my calendar anymore.
If I select "Configure Sync" there is no Lotus Notes in the list. (see picture below)
Screenshot IntelliSync
Then I did a "debug session" using ODS Default Viewer which is located in "C:\Program Files\Research In Motion\BlackBerry Desktop\IntelliSync\Connectors\Lotus Notes Connector"
Here you can find the dump file:
ODSDebug.log
If you need more details to help me with my problem please let me know.
Regards
BB Software: 6.0.0.600
BB Desktop SW: 6.1.0.35
Solved!
Go to Solution.

I am having the EXACT same problem. Please post if you find a solution.

Similar Messages

Lotus Notes Repository

Hi All,
    We are using EP6 SPS15.
    I am trying to configure the lotus notes repository with the help of steps given in help.sap.com. After configuration of the same the repository prefix showing under the root directory but when i am trying to click on it its giving me the following error.
<b>System missing in landscape configuration for a Lotus Notes repository</b> You tried to access a Lotus Notes repository, but the system of the Lotus Notes repository is missing in the system landscape configuration. Contact your system administrator.
         The strange thing is that i have done the same config successfully on EP6 SPS14. But no luck in SPS15.
        What would be the problem?
Regards,
Prasad

Hi
Will you please check whether you have followed following and do not forget to give points
Lotus Notes Integration With SAP Enterprise Portal 6.0
(Process description)
These documents describe the entire process of integrating lotus domino server with enterprise portal server to leverage the usage of lotus notes within the portal framework.
Step1: Create a System
o     Choose System AdministrationSystem configurationSystem LandscapePortal ContentContent Provided by SAP. Right click on collaboration and then choose New From ParSystem.
o     Select com.sap.netweaver.col.app.gw and choose next.
o     Select a server (lotus notes) and then choose next.
o     Enter the System Name and ID (for ex lotus) and choose next and then finish.
o     Enter System Aliases by choosing system Alias from the display drown list.
o     Enter the system Alias in the alias field and choose add and then save.
Step II: Create E-Mail Transport
     The email transport defines the SMTP server and other configuration required for sending e-mails. To configure an e-mail transport choose
     System AdministrationSystem ConfigurationKnowledge ManagementCollaborationGroupWare TransportsMail Transport
     SMTP Sever: The address of the SMTPServer for sending e-mails
     Sent Messsages: You specify the folder on the server where the sent e-mail is to be   store: -Sent on Lotus domino Server.
     System Alias name: Alias that was defined for the groupware server in system configuration.
Step III: Check E-Mailing Service
This is a global service that is required for sending e-mails and which can be   located by choosing System AdministrationSystem configurationKnowledge ManagementContent ManagementGlobal servicesMailing Service. This service needs to be active and an email transport must already have been created.
Lotus Domino Transports
The lotus domino server provides java libraries for the posting and retrieval of information servlets running on the domino server can make use of these java libraries to query the domino database for information. The Functionality is based on java servlets and runs on the lotus domino server. The java servlets need to be deployed on all connected lotus domino Servers. The transport consists of two parts
     Java transport that runs on the portal server (LDS-P) and is deployed automatically on installation
     Java servlet that runs on domino server (LDS-D) and needs to be installed on every lotus server in the landscape.
    The Process flow is
1.The Java-transport makes an HTTP(s) call to the servlet on the domino server and user credentials are passed.
2.The servlet retrieves the data from the server.
3.The data is retrieved to the java transport on the portal.
Installation of LDS-D Components
To access the users database (.nsf) the LDS-D component must be installed on the same domino server as that on which the database in question is available. If users are distributed among multiple Domino Servers, install the component on each of the servers. Alternately you can set up one Domino server with replication that host all portal domino users.
1.Locate the LDS-d component shipped with lotus transport.
The components can be found in<irj>\root\WEB-INF\PORTAL\PORTALAPPS\com.sap.netweaver.coll.appgw.translotus-api.jar.
2.Copy the com.sap.netweaver.coll.appgw.translotus-api.jar file to the lotus servlet folder as defined in the Lotus server configuration. For examplec:\Lotus\domino\Data\Servlet.Create this servlet folder if it does not yet exist.
3 Using the Lotus administrator Client update the domino server document (Current server document) in the section Internet protocolsDomino Web EngineClass path with above jar file path for e.g. C:\Lotus\Domino\Data|domino\servlet\Coll.appl.gw.translotus-api.jar.
4.Restart the lotus dominos HTTP Tasks.
Configuration of Cache is very important
Hope this helps you

Lotus Notes Missing in Drop Down List for Calendar Synch

Hello there,
   A) I am attempting to synch my blackberry tour with my calendar in Lotus Notes 8.5.2. I was able to previously synch my calendar when I had Lotus Notes 8.5.1, but since our upgrade to 8.5.2, I get an error saying it could not find a supported version of Lotus Notes.
B) When I try to go in and configure the organizer section of the desktop software, there is no option for the drop down list for Lotus Notes. I have tried uninstalling, rebooting and then reinstalling (based on info from other posts), but none of that seems to work. I have checked and all the connectors are there, but for some reason, they are not being recognized. Is there some specific key or file that intellisynch is looking for to know that Lotus Notes is installed on the machine?
Now, I am assuming A&B are symptoms of a common problem, but I am at a loss as to how to move forward. Any ideas on how I can get this software to recognize Lotus Notes? I appreciate any help you can give.
Thanks,
Rick

While calling method SET_TABLE_FOR_FIRST_DISPLAY pass 'A' to paramater I_SAVE .
CALL METHOD grid1->set_table_for_first_display
      EXPORTING i_structure_name = 'SFLIGHT'
                is_variant       = gs_layout
                i_save           = 'A'
                i_default        = p_def
      CHANGING it_outtab        = gt_sflight.

FillOutInterfaceInfo - Impl kCSDTPObserverImpl not yet registered. Missing from factory list resource in plugin kCSDTPPluginID?

I know this is a very basic question and I also undestand that I have to include the same in my XXXFactoryList.h file.
But the issue is that I have included it perfectly every where and still I an getting this ASSERT due to this, no instance of my CSDTPObserver:CObserver is getting created
Please help to get this rectifiedFillOutInterfaceInfo - Impl kCSDTPObserverImpl not yet registered. Missing from factory list resource in plugin kCSDTPPluginID?
below code from file CSDTPObserverImpl.cpp
CREATE_PMINTERFACE(CSDTPObserverImpl, kCSDTPObserverImpl)
/* CSDTPObserverImpl Constructor
CSDTPObserverImpl::CSDTPObserverImpl(IPMUnknown* boss)
: CObserver(boss, IID_ICSDTPOBSERVER)
below code from CSDTPFactoryList.h:
REGISTER_PMINTERFACE(CSDTPObserverImpl, kCSDTPObserverImpl)
Below code from CSDTP.fr:
resource FactoryList (kSDKDefFactoryListResourceID)
kImplementationIDSpace,
#include "CSDTPFactoryList.h"
resource ClassDescriptionTable(kSDKDefClassDescriptionTableResourceID)
AddIn
kDocBoss,
kInvalidClass,
IID_ICSDTPOBSERVER, kCSDTPObserverImpl,
Below code from CSDTPID.h:
// InterfaceIDs:
DECLARE_PMID(kInterfaceIDSpace, IID_ICSDTPOBSERVER, kCSDTPPrefix + 6)
// ImplementationIDs:
DECLARE_PMID(kImplementationIDSpace, kCSDTPObserverImpl, kCSDTPPrefix + 5)
Can some one please point out the mistake I am doing here???

Hi Dirk,
Please see below configuration in XXXID.h file:
// ImplementationIDs:
DECLARE_PMID(kImplementationIDSpace, kCSDTPServiceProviderImpl, kCSDTPPrefix + 0)
DECLARE_PMID(kImplementationIDSpace, kCSDTPIndesignResponderImpl, kCSDTPPrefix + 1)
DECLARE_PMID(kImplementationIDSpace, kCSDTSelectionObserverImpl, kCSDTPPrefix + 2)
DECLARE_PMID(kImplementationIDSpace, kCSDTPObserverImpl, kCSDTPPrefix + 3)
DECLARE_PMID(kImplementationIDSpace, kCSDTPStartupShutdownServiceImpl, kCSDTPPrefix + 4)
Above configuration is giving me below ASSERT:
FillOutInterfaceInfo - Impl kCSDTPObserverImpl not yet registered. Missing from factory list resource in plugin kCSDTPPluginID?
Now I changed the configuration as below:
// ImplementationIDs:
DECLARE_PMID(kImplementationIDSpace, kCSDTPServiceProviderImpl, kCSDTPPrefix + 0)
DECLARE_PMID(kImplementationIDSpace, kCSDTPIndesignResponderImpl, kCSDTPPrefix + 1)
DECLARE_PMID(kImplementationIDSpace, kCSDTSelectionObserverImpl, kCSDTPPrefix + 2)
DECLARE_PMID(kImplementationIDSpace, kCSDTPObserverImpl, kCSDTPPrefix + 4) //<-------changed from 3 to 4
DECLARE_PMID(kImplementationIDSpace, kCSDTPStartupShutdownServiceImpl, kCSDTPPrefix + 3) //<-------changed from 4 to 3
Now it is giving below ASSERT:
FillOutInterfaceInfo - Impl kCSDTPStartupShutdownServiceImpl not yet registered. Missing from factory list resource in plugin kCSDTPPluginID?
Now this looks really wierd. I also tried with some random combinations 5,6,7 but none is working and some how 3 is not working but 4 is working. Now how can I decide which
is going to work and why 3 is not working here.
Please enlighten me if any one has any clue here

Any sample ABAP code to send Lotus Notes email to a list of people?

Any sample ABAP code to send Lotus Notes email to a list of people?
We will give you reward points!

hi..
This sample code help you to send mail from SAP .
REPORT ZSSO_DOCUMENT_SEND_API1.
DATA: OBJPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
DATA: OBJHEAD LIKE SOLISTI1   OCCURS 1 WITH HEADER LINE.
DATA: OBJBIN LIKE SOLISTI1   OCCURS 10 WITH HEADER LINE.
DATA: OBJTXT LIKE SOLISTI1   OCCURS 10 WITH HEADER LINE.
DATA: RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
DATA: DOC_CHNG LIKE SODOCCHGI1.
DATA: TAB_LINES LIKE SY-TABIX.
Creating the document to be sent
DOC_CHNG-OBJ_NAME = 'OFFER'.
DOC_CHNG-OBJ_DESCR = 'Auction of a Picasso jr'.
OBJTXT = 'Reserve price : $250000'.
APPEND OBJTXT.
OBJTXT = 'A reproduction of the painting to be auctioned'.
APPEND OBJTXT.
OBJTXT = 'is enclosed as an attachment.'.
APPEND OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
Creating the entry for the compressed document
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM   = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM   = TAB_LINES.
OBJPACK-DOC_TYPE   = 'RAW'.
APPEND OBJPACK.
Creating the document attachment
(Assume the data in OBJBIN are given in BMP format)
OBJBIN = ' \O/ '. APPEND OBJBIN.
OBJBIN = ' | '. APPEND OBJBIN.
OBJBIN = ' / \ '. APPEND OBJBIN.
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
OBJHEAD = 'picasso.bmp'. APPEND OBJHEAD.
Creating the entry for the compressed attachment
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM   = 1.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM   = TAB_LINES.
OBJPACK-DOC_TYPE   = 'BMP'.
OBJPACK-OBJ_NAME   = 'ATTACHMENT'.
OBJPACK-OBJ_DESCR = 'Reproduction object 138'.
OBJPACK-DOC_SIZE   = TAB_LINES * 255.
APPEND OBJPACK..
Entering names in the distribution list
RECLIST-RECEIVER = '[email protected]'.
RECLIST-REC_TYPE = 'U'.
APPEND RECLIST.
RECLIST-RECEIVER = 'DLI-NEUREICH'.
RECLIST-REC_TYPE = 'P'.
APPEND RECLIST.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
     EXPORTING
          DOCUMENT_DATA = DOC_CHNG
          PUT_IN_OUTBOX = 'X'
          COMMIT_WORK   = 'X'
     TABLES
          PACKING_LIST = OBJPACK
          OBJECT_HEADER = OBJHEAD
          CONTENTS_BIN = OBJBIN
          CONTENTS_TXT = OBJTXT
          RECEIVERS     = RECLIST
     EXCEPTIONS
          TOO_MANY_RECEIVERS = 1
          DOCUMENT_NOT_SENT = 2
          OPERATION_NO_AUTHORIZATION = 4
          OTHERS = 99.
CASE SY-SUBRC.
WHEN 0.
    WRITE: / 'Result of the send process:'.
    LOOP AT RECLIST.
      WRITE: / RECLIST-RECEIVER(48), ':'.
      IF RECLIST-RETRN_CODE = 0.
        WRITE 'sent successfully'.
      ELSE.
        WRITE 'not sent'.
      ENDIF.
    ENDLOOP.
WHEN 1.
    WRITE: / 'no authorization to send to the specified number of'              'recipients!'.
WHEN 2.
    WRITE: / 'document could not be sent to any of the recipients!'.
WHEN 4.
    WRITE: / 'no authorization to send !'.
WHEN OTHERS.
    WRITE: / 'error occurred during sending !'.
ENDCASE.
Go for SCOT transaction to send those mails.
REGARDS,
VEERESH

Intellisync, Lotus Notes and Palm515, am I doomed?

There is nothing wrong with my pda except it won't sync. If I have to replace it just because of the software, I'll be really ticked.
Ever since IT upgraded (and I use the term loosely) us to Lotus Notes 8, I have been unable to sync my pda. I'm using:
XP Pro, Svc Pk 3
Hot Sync 4.1.0
Palm 4.1.4
Intellisync 5.5
Now what?
I'd be very grateful for any useful advice.
thanks,
Elizabeth
Post relates to: Palm m515

Hello Elizabeth,
Couple of quick questions:
Were you syncing to a Domino Server previously?
If so, what type of application were you using to sync with? Groupwise?
Your IT dept may not have enabled the sync on the Domino server side when they did the upgrade. It may be by design because of proprietary information (speculation).
Its important to contact your IT department. If you synced to Lotus Domino server using groupwise, you may have been forced to only sync to that. If you have been syncing to Palm Desktop and now are not able to, then there will be some other troubleshooting steps to take to resolve the issue.
Thanks,
Cola

Mountain Lion Notes App missing (IT installed Lotus Notes over the top)

My IT department installed Lotus Notes and it installed over the top of the Mountain Lion Notes application and thus deleted it. I renamed the Lotus Notes application (originally just called Notes). How do I get the original OSX notes application back?

Ok, found the solution, download mountain lion from the app store once more, then use Pacifist to extract the notes appllication again.

SAP IDM Lotus Notes : Missing dll

Hello
We are trying to connect SAP IDM to Lotus Notes, and we are facing some connexion issues.
When we run Notes u2013 initial load job, we have exactly the same error log as in this forum discussion: Provisioning framework for Lotus Notes
But additionally we can not find the MXEXTPWD.DLL files, witch is supposed to be in the Identity Center installation directory (C:\ProgramFiles\SAP\IdM\Identity Center)
In the forum discussion they talk bout MXVBNote.dll and MXNotes.dll, we canu2019t find them neither.
Does anyone know in witch step the MXEXTPWD.DLL is created? Or where we can find it?
Regards
SAP Netweaver IDM 7.1 SP5
Lotus Notes Client 8.5.1
Windows Server 2003 R2
Edited by: Jeremy Baars on Mar 7, 2011 11:57 AM
Edited by: Jeremy Baars on Mar 7, 2011 12:01 PM

Hi Experts,
I'm finally able to launch VB scripts to try to connect IDM to the Notes Client.
I said TRY because the initial Load for notes is still not working.
I'm facing another error message :
Open DB Names.nsf failed : error : the prompt for password was aborted by user.
Function OpenListNotes3 : Open DB Names.nsf failed : error : the prompt for password was aborted by user.
So I tried to enable/disabled the option in the Lotus client under "File/Security/User Security/(Enter password). Tab "Security Basics". Option:Don't prompt for a password from other Notes-based programs (reduced security) without success. Of course i restarted my server each time i made changes.
I also checked several times my constants in IDM. The Id_file/user/password are correct.
My connection parameters are also correct between Lotus Client and Domino server.
Any suggestion or idea?
It looks like IDM doesn't try to fill the password and just abort it...
Thanks en regards.
Jeremy

Indexing Lotus Notes databases: missing LCPPN30.DLL

Hi,
I'm trying to get MOSS 2007 to index some Lotus Notes databases. I've read through some blogs on how to do this (here, here and here) and also read the relevant chapter on page 227 from Patrick Tisseghem and Lars Fastrup's brandnew book "Inside the Index and Search Engines: Microsoft Office SharePoint Server 2007" (which I think is a must-have for anyone involved in SharePoint Search).
However, I cannot get past the stage where you have to run NotesSetup.exe (which is located in the SharePoint install directory). This executable depends on "LCPPN30.DLL", a DLL from IBM that according to documentation I mentioned above should be distributed with IBM's Lotus C++ API download. However, I've downloaded all Lotus C++ API versions from the IBM site (there were three at the time of writing), but they don't contain this DLL. The DLLs I found were "LCPPN30i.DLL", "LCPPN70.DLL" and "LCPPN80.DLL".
Looking at the filenames it looks like those DLLs I downloaded are all newer versions of the DLL I need. The version to which NotesSetup.exe is built doesn't seem to be available anymore. Is there any solution to this? I've already tried renaming the DLLs, but (as expected) this crashed NotesSetup.exe.

Yep, really hard to find! :( The version that contains the file is
Lotus C++ API Toolkit Release 3.0 for Windows English US
Finally found it on
https://www14.software.ibm.com/webapp/iwm/web/reg/download.do?source=ESD-SUPPORT&S_PKG=CR3DNNA&S_TACT=104CBW71&lang=en_US&cp=UTF-8 thanks to Mei Ying's Tech blog
http://meiyinglim.blogspot.com.es/2008/07/link-to-download-lotus-notes-c-toolkit.html :)

Lotus notes (ibm) to migrate all the data to Oracle DB Database 10g R2(10.2

Hi Experts,
we have legacy application which is running independently with back end as Lotus Notes(IBM).Now we wanted to migrate the application to our application with data . our application is running with oracle Database 10g R2(10.2.0.2.0).
Now I wanted to migrate all the data to Oracle DB.
Can you suggest me the best ways to do handle the above migrations .
thanks in advance

Hi,
Install all the required packages.
You are hitting a bug. Bug 7680459: LIBXP PACKAGE IS MISSING FROM LIST OF PACKAGES REQUIRED.
As per documentation Bug 7680459, the package libXp-1.0.0-8 is also required to invoke OUI successfully.
So, make sure that you have installed these packages including the dependency packages required.
Follow Doc ID 419646.1: Requirements For Installing Oracle 10gR2 On RHEL/OEL 5 (x86)
Regards,
Satish

Hyperlink in Smartforms not vworking in Lotus Notes

Hi,
I want to add a hyperlink (e-mail address), in smartforms that get triggerred through Action Profiles. I am facing a problem where in the smartform is opened in Lotus Notes.
While opening the e-mail in Lotus Notes and placing the cursor on the e-mail field in the smart form, it does not provide the hyperlink kind functionality.
Text:
Your request has been forwarded to the following team:
Team: Support team, e-mail address
Contact person: Message processor (Full name, internal phone number)
The e-mail address field as shown is not populated as a hyperlink in Louts Notes.
Please help.
Thanks,
Rinkal

Thank you Abhilash. Yes I tried those. This is what i did:
1. Created a text element in the smartforms with text 'MY URL'. Using the 'Insert URL' button (in the extreme right of the list of buttons) assigned hyperlink to it. The word changed to underline and in blue colour.
2. I called function module HR_RCF_SF_URL_PREPARE_CALLBACK, in smartform. Also i tried calling in the report.
3. Assigned the function module HR_RCF_SF_URL_CALLBACK in the URLCALL field of the FM that is calling the SF.
Please let me know if i missed any steps.
Thanks in advance,
Karuna

Error:When adding RDC runtime library (Crystal report XI R2) to Lotus notes

Background : We have reporting feature implemented in one of lotus notes application using crystal reports 6 (OCX) and as Crystal report is going to be upgraded to CR XI version in my organisation, we need to implement the same using RDC component available in crystal XI . we have installed Crytal report XI R2 - SP 6 version for testing the integration.
we are referring a document available on SAP web site(attached below) that illustrates the steps required to integrate the Crystal Reports® Report Designer Component into a Lotus® Dominou2122 application. http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/509b02de-a81e-2b10-f598-822b6d6f2024?quicklink=index&overridelayout=true
Steps which have been outlined for adding runtime library in lotus domino application is shown below:-
1. In Domino Designer, add a Form to the application.
2. In the programmeru2019s pane, go to the (Declarations) handler of the Form and enter:
Dim App As Variant, Dim Rep As Variant
3. Select Create | Object and select the u201CControlu201D radio button in the u201CCreate Objectu201D dialog box that comes up. From the list of controls, select u201CCrystal Report Viewer Control.u201D This adds the control to the Form.
4. Click on the control and select Edit | Properties. In the u201CAppletu201D properties dialog, select the u201CSize object to fit windowu201D radio button and then close the properties dialog.
We are getting an error message while trying to add 'Crystal Report Viewer Control' control (illustated in Step 3 above) in the lotus notes form . Error message which we get is 'An error has occured while processing a request on an object'.
Alternatively , we created the object of Crystal Report Viewer on lotus notes form by adding viewer object file (Crviewer.dll) from the file system after selecting the u201CObject from a fileu201D radio button in the u201CCreate Objectu201D dialog box and added following code in the postopen event of lotus notes form .
Set m_Viewer = Source.GetObject("Crystal Report Viewer Control")
Set App = CreateObject("CrystalRuntime.Application")
Set Rep = App.OpenReport(u201Cc:lotus
otes
ep.rptu201D)
Set m_Viewer.ReportSource = Rep
Again, when lotus notes form is opened , it gives error 'Variant does not contain object' at 'Set m_Viewer.ReportSource = Rep' .
Can any one suggest us any workaround or if iit is not possible in CR XI R2 into a Lotus® Dominou2122 application. Also, can any one provide us sample code if CR 2008 version can be integatred with lotus notes.

I believe, Lotus was never a "supported" development platform, though it did work - at one time or another. Eventually it did not and you are at that point. I think it was CR 10 where it started to be impossible to add the viewer to Lotus. This was never fixed and we never did find out if this was a Lotus thing or a CR thing.
Re. CR 2008 and Lotus. The RDC has been retired in CR 2008, so no luck there either for you. The only SDKs available in CR 2008 are for .NET and Java.
Ludek

How do I add a Lotus Notes account to Entourage?

Hi there,
Our company uses Lotus Notes for email, and we recently got Lotus Notes Traveler set up on our iOS devices for email access via iPad/iPhones through Mail.
I'd like to know if it's possible to set up access to my Lotus Notes account through Entourage 2008. I'm guessing that it uses either IMAP or Exchange, but I haven't been able to find the right combination of settings to make it works. Before I spend too much time on this, I'd first like to know if it's even possible.
If it is, how would I go about doing it? My series of questions below:
1. How do I find out whether it's IMAP or Exchange? Please note that I CANNOT ask my administrator about anything in this message, so that is not an option.
2. Do I have to be on my company's domain to make this work? My Mac Lotus Notes client works fine and I'm currently not on the domain.
3. In the settings on my iPad (screenshot below - actual server names removed for obvious reasons), it says "Exchange Account" at the top, the under Server is lists "server.company.com/servlet/traveler and under Email is lists : "Firstname [email protected]/servlet/traveler" (space included on the name). Are these settings of any use in Entourage? Seems odd to me that the "Email" field isn't actually my email address (which is [email protected]).
4. If the settings ARE of use in Entourage, where would I insert them?
Any help or insight on this would be much appreciated.
Thanks!

It could potentially be a glitch with the servers when you have tried adding it. Although it may seem a silly suggestion have you done a battery pull (remove battery, wait 30 seconds and reinsert) - this may clear the problem.
A security wipe of the phone may also work but ensure you do a backup before hand. Otherwise a call to your mobile carrier to see if they can assist might be worth a try.

Sync Palm With Lotus Notes 8.5.1 Using EasySync 4.2.7: Calendar does not show location

I have a Garmin iQue3600, which is basically a Palm III with a GPS built in. I could sync my Outlook 2007 contacts and calendar flawlessly. (Palm Sync 6.0.1, Palm Desktop 4.1.4). Company was purchased, now we are using Lotus Notes 8.5.1. No native Palm support, so I tried EasySync 4.2.7. This actually works pretty well, except that the calendar entries do not sync the location of the meeting; this is rather important to me.
Is there a setting somewhere that can fix this? Years ago I used Intellisync to do this, but that company is gone now.
Someone suggested Companionlink, but the on-line reviews for that product are pretty bad.
Thank you.

Lisa,
Welcome to the Palm forums and thanks for that great feedback!
Alan G
Post relates to: Treo 755p (Sprint)

No option to save files, content/file type missing from Applications list

I want to be able to click a link to a file and have the option to Open the file with a specified application.
When clicking on the file I want to Open with a specified application, I only get a Save or Cancel option.
When I look in Preferences > Applications, the file type is missing from the list.
This was working. It is not working anymore. It is not a problem with the website. I need to know where in the FF settings I can change this.
FF 30.0
Kubuntu 13.10
Thanks

''Tahl [[#answer-693773|said]]''
<blockquote>
OP, did you ever get a solution to this problem? It's driving me nuts having to specify a download destination then go into a program to open the file I just downloaded!! Have tried deleting file types .rdf and no success either!
</blockquote>
I'm not sure of the solution on Windows. But this worked for me on Linux.
I needed to edit mimeTypes.rdf
See the links below for details. The first one was someone having a problem with Transmission. I was having a problem with ktorrent, so I just adapted that. If you're having a problem with a different file type, then you'll need to adapt it differently. But the general idea is the same.
http://askubuntu.com/questions/384375/how-can-i-get-firefox-to-open-torrent-files-with-transmission
http://forums.mozillazine.org/viewtopic.php?f=9&t=1706945
Also, I suspect that FlashGot or some similar download manger plugin was responsible for screwing this up. I haven't confirmed it yet, but I've seen some things that make me suspect it.

Lotus Notes 8.5 missing in IntelliSync List

Similar Messages

Maybe you are looking for