Lotus repository manager
Hi,
I have followed sdn documentation for the creation of Lotus repository manager. The Lotus Domino server settings and restart have happened. Yet, the component monitor start up has failed.
Filter, services and resource event broker all show as running.
Please advise as to what may be wrong. Valuable suggestions would be rewarded with points.
Thanks,
Arun
hi,
You must fulfill the following prerequisites in order to use the lotus repository manager:
· You have installed a Lotus Domino server in version 5.0.6.
· You have a Lotus Notes user that has read access to all documents.
The following settings are to be made in the Domino Administrator by the administrator of the Lotus Domino server.
1. Users have an Internet password. On the People and Groups tab, choose People -> Edit Person. On the Basics tab for the user, set the Internet password. This password is needed for User Mapping in the portal.
2. The permission Run unrestricted Java/Javascript/COM must be assigned to the users on the Lotus Domino server. Make these settings under Configuration -> Current Server Document -> Security.
3. You have to activate the parameter Allow HTTP clients to browse databases under Configuration ® Current Server Document -> Internet Protocols ->HTTP so that the repository manager can access the Lotus Domino servers databases.
Make sure that the timeout of the DIIOP Web Agent is set to a suitable value. Enter a value of 3600 or higher.
4. The IIOP protocol has to be activated (Configuration tab and then Current Server Document ® Ports -> Internet Ports -> IIOP).
Make sure that the DIIOP task is activated. Enter load diiop into the server console, or add DIIOP to the list of tasks in the notes.ini file: ServerTasks =
,diiop,
5. The HTTP and IIOP ports of the Domino server have to be open.
For details check out the link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/ba/8bccaef0dac945a4177797f4e29aa0/frameset.htm
hope this helps u.
regards
mujjammil
Similar Messages
-
Lotus Notes Repository Manager
Hi ALL
is there someone, who knows where to download the "Lotus Domino Toolkit for JAVA/CORBA Release 5.0.8" mentioned on SAP Help to configure Lotus Notes Repository Manager.
I am using NW04 EP60 SPS 12 and KMC SPS12 on Windows and MSSQL.
I searched on www.lotus.com and found nothing
OR
is there an other possibility to integrate LN Domino Repository ? and where to find a instguide ?
Thanks for your help
AndreasHi Prakash,
Lotus Domino Toolkit for JAVA/CORBA Release 5.0.8 mentioned on SAP Help to configure Lotus Notes Repository Manager
I am using NW04 EP60 SPS 13 and KMC SPS13 on Windows and ORACLE.
well i want to use it for lotus domino 6.5.2 since the version of toolkit is 5.0.8 so it's working with 6.5 version
if yes than plese send me toolkit on [email protected]
if not than what is alternative way to integrated domino repository with sap enterprise portal
regards,
kaushal -
Conet Repository Manager for Lotus
Hi, guys.
We have to use the KM Repository Manager for Lotus Domino deliverd by Conet
which is based on Lotus Domino R6 and higher.
Does this mean we have to BUY the new Repository Manager from Conet
and get related implementation and configuration help from them too?Hello Sven,
as far as I know and based on the SAP certification records CONET is the only company delivering a KM repository manager for Lotus Notes/Domino databases.
Despite the fact that the "old" SAP KM repman for Domino is technically limited to R5, the CONET repman also comes with more features and richer functionality (e.g. you can configur your distributed Lotus landscape / replication architecture for the Conet repman and other features).
Simply visit SAP TechED 2006 Session UPE106 and learn more on Lotus integration with SAP KMC.
Regards
Michael -
Calendar Repository Manager for CRM Calendar
Does anyone know of a way to create a Calendar Repository Manager to integrate with a user's CRM calendar?
Actually, information on how to connect the Calendar Repository Manager to anything other then Lotus or Exchange would also be helpfullHello Loke,
Yaa this is concern related from Collaboration side u have to configure calender Repository Manager.
For that plesae access thease links.
[Configure Calender Repository Manager|http://help.sap.com/saphelp_nw70/helpdata/EN/23/2e47b6c8d0df43a23e7ab1d78ed342/frameset.htm]
[Configuration Step's|http://help.sap.com/saphelp_nw70/helpdata/EN/35/3ba93e08503614e10000000a114084/frameset.htm]
points are welcome if helpfull
regards.
Soni Vinit -
Knowldge management - Repository Framework- Repository manager- Repositor
Dear all,
We have a requirement to store different kinds of documents could you please explain Wha is Repository Framework->Repository manager-> Repository
i have seen WebDV, Lotus notes, File system, Webrepository for above scenario which repsoitory can use what is CM repository manager how can use Persistance modes DB, DBFS, FSDB modes
can some one explain about how to integrate between a repository to repository manager and repository framework for above scenario.
i am bit confused about all these terms
Experts please explain these terms with practical scenario
Thanks in advance, helpfull answers will get maximum points
Thanks in Advance,
AshokHi
Repository framework:
Knowledge Management capabilities provides a central, role-specific point of entry to unstructured information from various data sources. This unstructured information can exist in different formats such as text documents, presentations, or HTML files. Workers in an organization can access information from different source such as file servers, their intranet, or the World Wide Web.
The Repository framework(RF) integrates these data sources and provides access to the information contained in them through the portal.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/cacd8860-0a01-0010-a393-a7bdd1449487
REpository managers:
To integrate differnt type data source we need repository managers .
e.g.
we can configure internal repository like Content management repository managers:(CM)
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/284
We can also configure external repository like file repository, lous notes repository etc.
File repository maanger:
By cofiguring file reposisitory we can access outside file systems through Knowledge management.
We can use diffrent repository managers in the configuration like W2KSecurityManager
https://www.sdn.sap.com/irj/sdn/thread?threadID=560624&tstart=525
The configuration for all the repository managers are provided by the SAP library.
chk this:
KM>admin guide>sys admin>sys configuration>repository and repository managers
http://help.sap.com/saphelp_nw70/helpdata/en/4c/9d953fc405330ee10000000a114084/frameset.htm
This will be sufficient to clarify your doubt.If you want any help let me know.
Reward points if helpful.
Regards
Manisha -
hi, guys
I need to integrate the Lotus Domino 6.5 with Portal, and I saw some thing in SAP help:
"If you use Lotus Domino Server Version 6.x or higher, a repository manager is available from an SAP partner."
I am not very sure with this. Cant I do this job with EP 7.0 standard delivery?Hi Eric,
I think you should try asking the SAP Support.
They can point you to the SAP partner which can provide the Repository manager.
I am hopeful tht it will work with EP7 also.
As there is no such restriction specified in SAP help.
Revert back with what u did and what u got.
Regards,
Sumit -
SOAP/Web service based repository manager
Hi,
We would like to implement a repository manager using SOAP/Web service messages to connect to the document store. The solution will have to support most opperations as the WebDAV repository manager supports. TREX has to be able to crawl for indexing/classification, but I guess that is not a problem.
Is the some information out there on creating repository managers like this, and how they tie in with ACL managers, cahces etc?
Message was edited by: Bjorn BjornstadNot relevant any more
-
Error when displaying thumbnails in new repository manager
Hi KM Experts,
I created a new Repository Manager as a copy of /documents.
When I upload Images (jpegs, gifs) in this repository and try to display them using a ConsumterThumbnailExplorer I don't get the thumbnails displayed but the X-symbol that the browser displays when a image was not found. In the /documents repository the thumbnails are getting displayed.
Here is the exception from the trace file:
java.lang.NoClassDefFoundError: sun.awt.motif.MToolkit (initialization failure)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:134)
at java.lang.Class.forNameImpl(Native Method)
at java.lang.Class.forName(Class.java:119)
at java.awt.Toolkit$2.run(Toolkit.java:796)
at java.security.AccessController.doPrivileged(AccessController.java:197)
at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:787)
at com.sapportals.wcm.repository.manager.thumbnail.ResourceImageThumbnailPlugIn.getThumbnail(ResourceImageThumbnailPlugIn.java:96)
at com.sapportals.wcm.repository.manager.thumbnail.ResourceImageThumbnailPlugIn.getContentThumbnail(ResourceImageThumbnailPlugIn.java:45)
at com.sapportals.wcm.repository.manager.thumbnail.ThumbnailNamespaceManager.getImage(ThumbnailNamespaceManager.java:539)
at com.sapportals.wcm.repository.manager.thumbnail.ThumbnailNamespaceManager.getCreatedResource(ThumbnailNamespaceManager.java:459)
at com.sapportals.wcm.repository.manager.thumbnail.ThumbnailNamespaceManager.getContent(ThumbnailNamespaceManager.java:335)
at com.sapportals.wcm.repository.ContentImpl.internalGetContent(ContentImpl.java:328)
at com.sapportals.wcm.repository.ContentImpl.<init>(ContentImpl.java:84)
at com.sapportals.wcm.repository.ResourceImpl.internalGetContent(ResourceImpl.java:3203)
at com.sapportals.wcm.repository.ResourceImpl.getContent(ResourceImpl.java:1183)
at com.sapportals.wcm.repository.ResourceImpl.getContent(ResourceImpl.java:1147)
at com.sapportals.wcm.protocol.webdav.server.WDGetHandler.internalHandle(WDGetHandler.java:319)
at com.sapportals.wcm.protocol.webdav.server.WDGetHandler.handle(WDGetHandler.java:282)
at com.sapportals.wcm.protocol.webdav.server.WDServlet.doGet(WDServlet.java:791)
at com.sapportals.wcm.protocol.webdav.server.WDServlet.service(WDServlet.java:483)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sapportals.wcm.portal.proxy.PCProxyServlet.service(PCProxyServlet.java:333)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sapportals.portal.prt.core.broker.ServletComponentItem$ServletWrapperComponent.doContent(ServletComponentItem.java:110)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.wcm.portal.connection.KmConnection.handleRequest(KmConnection.java:52)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(AccessController.java:246)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172).
Any help is appreciated !
Regards, Andreas
Edited by: Andreas Wachendorfer on Oct 29, 2009 7:05 PMProblem solved: JVM Parameter -Djava.awt.headless=true had to be set....
-
Problem with CM repository manager
Hi
I am trying to access the documents of file server with CM Repository manger(FSDB).The Current portal version is EP6 SP15.I did configuration for production,Development system.i did exactly same.but it is not working in Development system.i created Network path,cache,CM Repository Manger.where should i see the log file to check the error?
While Configure CM repository manager,there is no property to specify DB Connectionpool parameter?
but it is working fine in production system,but not in Development System.
i selected Auto Checkin/checkout parameter while creating CM repository manager.where should i need to check weather this is working or not?
i am not able to see the /etc folder in case of development system ,but able to see in production system?
can anybody helpme out in this regard?
PrasadHi Julian
thanks for your quick response.i checked the commponent Monitor.it is giving an error called:"Startup Error: parameter context is null ".do you have any idea?
Please help
Prasad -
Hi all,
I have created a file repository manager.
I have done the following settings for creating a file repository manager:
Active :checked
Hide in Root Folder: not checked
Send Events :checked
Property Search Manager : not set
Repository Services : not set
ACL Manager Cache : ca_rsrc_acl
Security Manager : W2kSecurityManager
Description
Prefix (must start with /) : /demo
Windows Landscape System : Microsoft_Windows_KM
Read-only : not checked
Lookup mode : caseless
Read-only Content Expiry Delay:
Root Directory:
132.186.124.207\calender
Even after restarting the server, a folder by name calender is not being created in the root in KM content.
What could be the reason?
thanx and regards,
anuradha.Hi Anuradha,
The root in KM Content will have a folder by the name <i>demo</i>(value of property <i>Prefix</i>), not <i>calendar</i>.
BTW I recommend you don't change the prefix to <i>/calendar</i>... as the CalendarRM uses that prefix and so a clash could occur!
Regards,
Ashish. -
WebDav Repository Manager Disappears???
Hello,
I am seeing some strange behavior with an IIS WebDAV based KM WebDAV repository manager I created. I used the following as a basis for my setup.
http://help.sap.com/saphelp_nw04/helpdata/en/4a/217fb6c33c6748a1715a161ac942cd/frameset.htm
I created the memory cache, CM HTTP System, a portal system aliased with the same ID as the CM system, and finally the WebDAV Repository manager. If further setting detail is needed I can send that. The repository worked on Friday. It is not there today. This has happened twice. When I drill down into Content Administration > KM Content>root > runtime > Repository Managers... > IISWD > servers I am presented with "hostname". When I select Details>Properties>Miscellaneous tab I see failures.
Example:
last-failure-1: 2007-07-16T20:12:14Z: PROPFIND /ExternalPortal: com.sapportals.wcm.WcmException: sending request to: http://hostname/ request uri: /ExternalPortal unable to connect to hostname: unknown host: hostname (java.net.UnknownHostException: hostname)
All of the required KM objects mentioned before are still present and configured as they were a few days ago. Is my repository loosing it's reference to the CM HTTP System.? Has anyone seen this before?
Thanks,
DougHi Doug
I believe the problem is that your HTTP System in the portal cannot see the share you are trying to integrate into the potal. Is it a webdav-share set up using an IIS?
I have tried to implement the WebDAV/SSO solution where we got the same error for no reason. But after installing some different hotfixes (http://support.microsoft.com/default.aspx?scid=kb;en-us;893246, eg) and changing server to a standalone IIS, the error didn't occur any more.
Hope that can give you some ideas.
Kind regards,
Martin -
A parameter of CM repository manager
In CM repository manager,there is a parameter called "Compress content greater than".I don't know wether it will compress content when the all documents of it greater than the parameter or it will compress the document when the uploaded document greater than the parameter. And how larger should I set it?
Can you tell me?
TksYou mean when the size of contents in my CM repository manager is greater than that configured value,it will compress the new uploaded documents.But I don't know wether it will influence the performance of my repository manager and is there a standard formula to compute the best value?
Best regards! -
Searching problems when implementing my own repository manager
Hi there,
i've serious problems to get the search fuctionality for my own repository manager running. I'm using the 'new', Netweaver-based api.
Always if I'm launching a search I receive a ClassNotFoundException in the follwing context:
#1.5#172.16.17.102:7CF6B6:FF73BDDB07:-36E7#1097161124650#com.sapportals.wcm.WcmException#irj#com.sapportals.wcm.WcmException.WcmException(118)#System#0#####System_Thread_37##0#0#Error##Plain###invalid manager class: com.sapportals.wcm.repository.runtime.ManagerAdapter java.lang.ClassCastException: invalid manager class: com.sapportals.wcm.repository.runtime.ManagerAdapter
at com.sapportals.wcm.repository.RMAdapter.<init>(RMAdapter.java:48)
at com.sapportals.wcm.repository.runtime.CmSystem.getResourcesImpl(CmSystem.java:1134)
at com.sapportals.wcm.repository.runtime.CmSystem.getResources(CmSystem.java:356)
at com.sapportals.wcm.repository.runtime.CmAdapter.getResources(CmAdapter.java:153)
at com.sapportals.wcm.service.indexmanagement.retrieval.trex.TrexSearchIndexCollection.getSearchResults(TrexSearchIndexCollection.java:1126)
at com.sapportals.wcm.service.indexmanagement.retrieval.search.SearchSession.getSearchResults(SearchSession.java:293)
at com.sapportals.wcm.service.indexmanagement.retrieval.search.FederatedSearchSession.getSearchResults(FederatedSearchSession.java:111)
at com.sapportals.wcm.rendering.collection.SearchRendererStatus.refresh(SearchRendererStatus.java:180)
at com.sapportals.wcm.rendering.collection.LightCollectionRenderer.createStatus(LightCollectionRenderer.java:718)
at com.sapportals.wcm.rendering.collection.LightCollectionRenderer.renderAll(LightCollectionRenderer.java:498)
at com.sapportals.wcm.rendering.control.cm.NeutralControl.render(NeutralControl.java:141)
at com.sapportals.wcm.rendering.layout.cm.SimpleLayoutController.render(SimpleLayoutController.java:39)
at com.sapportals.wcm.rendering.control.cm.WdfProxy.render(WdfProxy.java:1229)
at com.sapportals.wdf.layout.HorizontalLayout.renderControls(HorizontalLayout.java:41)
at com.sapportals.wdf.stack.Pane.render(Pane.java:153)
at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:67)
at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:64)
at com.sapportals.wdf.stack.Pane.render(Pane.java:156)
at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:67)
at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:64)
at com.sapportals.wdf.stack.Pane.render(Pane.java:156)
at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:67)
at com.sapportals.wdf.layout.HorizontalLayout.renderPanes(HorizontalLayout.java:64)
at com.sapportals.wdf.stack.Pane.render(Pane.java:156)
at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:67)
at com.sapportals.wdf.ControllerDynPage.executeEvent(ControllerDynPage.java:338)
at com.sapportals.wdf.BaseDynPage.onWdfEvent(BaseDynPage.java:132)
at java.lang.reflect.Method.invoke(Native Method)
at com.sapportals.htmlb.page.DynPage.doProcessCurrentEvent(DynPage.java:172)
at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:101)
at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:64)
at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:25)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sapportals.wcm.app.servlet.WcmHtmlbBaseServlet.service(WcmHtmlbBaseServlet.java:81)
at com.sapportals.wcm.portal.proxy.PCProxyServlet.service(PCProxyServlet.java:280)
at com.sapportals.portal.prt.core.broker.ServletComponentItem$ServletWrapperComponent.doContent(ServletComponentItem.java:110)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:301)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:143)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:195)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:209)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:589)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:301)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:143)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:195)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:636)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:209)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:532)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:415)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.inqmy.services.servlets_jsp.server.InvokerServlet.service(InvokerServlet.java:126)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.inqmy.services.servlets_jsp.server.RunServlet.runSerlvet(RunServlet.java:147)
at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.startServlet(ServletsAndJspImpl.java:789)
at com.inqmy.services.httpserver.server.RequestAnalizer.checkFilename(RequestAnalizer.java:644)
at com.inqmy.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:305)
at com.inqmy.services.httpserver.server.Response.handle(Response.java:165)
at com.inqmy.services.httpserver.server.HttpServerFrame.request(HttpServerFrame.java:1133)
at com.inqmy.core.service.context.container.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:36)
at com.inqmy.core.cluster.impl0.ParserRunner.run(ParserRunner.java:35)
at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
at java.security.AccessController.doPrivileged(Native Method)
at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:132)
I'm using EP 6.0 SP2 directly installed from the CD
#51 020 549 without explicit installation of any patch or hotfix; the portal itself shows the version number 6.0.2.0.0 (implementation version 6.2.0.0.200310100950).
I switched on logging but I never reached the INamespaceManager's methods isQueryPropertyNameUnderstood() or getQueryBuilder().
So I figure that this might a problem of my (too old?) unpatched version of EP6????
What can I do to get the serach func running?
Thanks for your support,
DanielHi Karsten,
thanks for your annotation.
Does it mean that I <b>HAVE TO</b> apply at least Patch 4
to get the search working or <b>SHOULD</b> I apply the patch to be up-to-date and look for an error in my code???
Thanx a lot,
best regards,
Daniel -
Unable to create File System Repository manager
Hello,
I would like to create File System Repository manager to this path: I have mapped a certain Network drive "
main-uni-fs1\pictures$" to the Portal Machine and under this machine it appears as drive "N:\", inside it there is a picture folder which I would like to create the mapping to. I tried setting the "Root Directory" value to "N:\" and to "
main-uni-fs1\pictures$" but I keep receiving an error message at the Repository Component Monitor (see below).
10X,
RoyHello Roy,
1> Create a new path that points to the pictures directory on the system. Enter the path lik
mypc.myorg.com\pictures
Under Sys admin -> Sys Config -> KM -> Content MGT -> Global Services -> Network path
Under the user name and password, enter your username and password
username whould be entered like domainname\username
2>Then create a system in for the mypc.myorg.com server under
Sys admin -> Sys Config -> KM -> Content MGT -> Global Services -> System landscape definitions -> System -> Windows Sytem.
(Assuming u are acessing a windows sytem from a portal running on windows platform).
You need to enter system id and description . Kindly remember the system id, since it would be useful in two places while usermapping and creating the file system repository.
3>create a file system rep mgr under
Sys admin -> Sys Config -> KM -> Content MGT -> Repository Managers > File System Repository
Following properties are most important.
Name , ACL manager cache, Security manager(which you would have to set to W2kSecurity manager)
prefix(this is the folder name that you will identify your repository with) Widws landscape System (this is the sytem id of step 2) and root directory (network path of first step only in this case enter it like this //mypc.myorg.com/pictures)
4>Then under user mapping section, you will find you system (the system id of second step) , enter your name as password.
Initially when you configure your rep manager, you dont need to start ur servlet engine. If you modify any property then you need to re start ur servlet engine.
These are the steps for creating repository
If this still does not get resolved. Then kindly read the limitations of creating the file system repository manager in the link that I had posted in my earlier post.
Thanks and Regards
Pradeep Bhojak -
BOE integration in SAP NW Portal via repository manager and km content
Hi BO XI experts,
we try to synchronize a BO folder of BO InfoView through the KM Content in SAP Portal. Following the instructions of the book "Integrating SAP Business Objects XI 3.1 Tools with SAP NetWeaver", we
- installed the system under System Administration --> System Configuration --> System Landscape
- checked settings in the web.xml file
- integrated a Crystal Report through upload and apply of the par-file com.BusinessObjects.pct.masteriview.par
--> the iView for a specific report contained in the InfoView works fine
- integrated the par-file BusinessObjectsKM.par
- created a new Business Object Repository Manager through System Configuration --> Content Management --> Repository Managers --> Business Objects Repository with a new prefix
- went to Content Admin --> KM Content and tried to open the new repository with this prefix
Before upgrading our systems with EP 1 for NW 7 (and EP 4 for SAP ERP 6) this repository worked fine.
After this, we encounter the following error and cannot open InfoView content anymore:
System Error
An exception occurred during the program execution.
Exception Message: Your operation cannot be fulfilled due to a network problem, please try again.
Go back and try again
The SSO connection seems to work fine as the a single Crystal Report can still be opened through the iView.
Does anybody have an idea how to solve this problem?
Thank you very much in advance.
Best regards,
CarolinHello Ingo,
thank you very much for responding so quickly. Yes, I tried it with a new BO repository but without any changes. I also repeated the upload of BusinessObjectsKM.par - file.
I'm wondering about the result of my system connection test of the BOE system.
There I get the message:
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
As the Crystal Report iView works correctly and therefore SSO is supposed to be installed properly, I do not understand why we receive this message. Could the problem, in spite of the crystal report working fine, lay in a uncorrect system configuration?
Before, when the repository worked properly, I did not verify the connection test.
The enhancement packages should not have had any impact on our BO installation.
Thank you for your help.
Carolin
Maybe you are looking for
-
I currently have only 1 thats connected to the PC For some odd reason when I start the PC the screen tells me its the Sixth IDE Master drive and my CDRW and DVDRW roms display as Primary IDE Master and Slave The CDRW and DVDRW are connected to IDE1 i
-
I just bought the new Mac Mini with 2GB RAM, 320GB HDD, and 256MB video memory. It´s connected to a Samsung 1080 40inch TV using mini DisplayPort to DVI to HDMI connection and a Dell 24WFP monitor using a mini DVI to DVI connection. When I´m in exten
-
I rented a movie. It downloaded it wouldn't play. Now it is constantly tring to download. How can I stop this?
-
Is Any Body Tell Me How to Creat a Script Form(converting script into pdf)
waiting for u r responce, pls help me in this concernd
-
HT1386 How can you sync outlook calender to iphone?
Hi. Can anyone tell me how to sync my PC to the iphone. I do not want to sync from phone to PC. Just need to be able to sync from the PC to the phone when I leave the office, so that I have an upto date calender on my phone