Loud "crack" sound from 2006 MBP, now will not charge from Magsafe PS

While using my 2006 MBP 2.33 C2D , there was a sudden loud "crack" / "pop" sound. I then noticed that the green charging light on the magsafe power adaptor had gone out. So i checked the mains socket, and everything there was OK. I then tried plugging the Magasfe adaptor into different power sockets, and still nothing.
I also tried the MBP with a spare magsafe adaptor i have, and that also fails to light the green light on the side to show any charge/power.
At the moment the MBP still works but is running off whats left on the battery charge.
So i'm guessing the "crack" sound I heard was some interal fusein the MBP  blowing?
Any ideas? Could it be serious and an easy fix?  In the past I have changed the HD, optical drive etc so am fairly ok at a bit of DIY on the MBP.

With the light on the Magsafe charger being out, I tend to suspect it rather then the MBP.
You might take the Magsafe charger to the Apple Store and see if they can test it for you. If it is bad, buy a new one. If not, then it would have to be the MBP.
Allan

Similar Messages

  • 5G will not charge from wall adapter

    My new 15 gig 5G will not charge from a 5 volt wall adapter.It charges fine on the USB port on my computers.
    So I decided to take a USB extension and cut it an place a current meter in series with the 5 Volt on the USB line.What I found is that it will draw ~500ma with the data lines connected in the cable(in other words a normal cable). Now if I disconnect the data wires so that I am only connecting the 5 volts from the USB port it will draw ~100 ma for a second and then draw no current.It appears that some kind of handshaking is required. Is this normal?
    As it is now I will not be able to ever charge it from a 5 volt supply.Do they do something to the data lines on wall adapters?

    Well I finally got my "dumb" USB charger (a Belkin F8Z009 Power pack) to work with my iPod 5G 30GB. To wake up the 5G needs to see 2.5 volts on it's data lines. The easiest way to do this is with a voltage divider made with two equal resistors. Like this:
    As a poof of concept I made the device below with four 30K resistors but anything from 10K to 50K should work fine.
    A more compact wake up cable could be made by cutting into a standard USB male-female extension cable and soldering in four resistors like this:
    Of course if your building your own or can get your "dumb" USB charger open then the resistor voltage dividers can go inside.
    Dell Latitude   Windows XP Pro   iPod 5G

  • IPhone's 4S & 5 will not charge from wall charger

    Similarly to everyone else, I have updated my iPhone 5 & also 4S to IOS 6.1.3.
    The batteries in both phones are draining very fast just as a lot of other people are commenting on, but also both phones will not charge from various devices that do work.
    I have 2 cables that both work in the car an on my PC, neither now work when connected to a GPO.
    This started straight after the phones were updated.
    Thoughts; advice please.

    i did the basic stuff OF COURSE .... but i am NOT willing to go through the pain of restoring my phone just because Apple screwed up another IOS update ..... i am really getting sick of thiose half-baked updates that break more things than fix ....

  • My i pod touch was fully discharged and now will not charge

    my i pod touch was fully discharged and now will not charge at all. what can i do

    Try the not charging topic of:
    iPod touch: Hardware troubleshooting
    Also try another cable, another charging source. Further look at the dock connector in the iPod. Look for abnormalities like foreign material, bend or corroded contacts, broken or cracked plastic.

  • My ipod will not charge from a wall socket but will charge using the same cable if the usb end is plugged into a computer or an airport power source. My iphone and ipad charge fine on the same cable usin ghte same wall plug in the same wall socket?

    My ipod will not charge from a wall socket but will charge using the same cable if the usb end is plugged into a computer or directly into an airport power source. My iphone and ipad charge fine on the same cable using the same wall plug in the same wall socket. This makes no sense but I see that it has been posted as a problem elsewhere. This must be due to some kind of degredation of the Ipod. . It is not fixed by IOS resets as others have noted.
    Has anyone asked Apple directly about this?

    Hi there Apples or Pears,
    I would recommend taking a look at the troubleshooting steps found in the articles below.
    Charging your iPod battery
    http://support.apple.com/kb/ht1384
    iPod's battery doesn't charge
    http://support.apple.com/kb/ta44551
    -Griff W.

  • IPhone will not charge from wall socket only from Laptop or Computer!

    Just wondering if anyone else has had this problem?
    My IPhone will charge sometimes and sometime it wont:
    I mean like sometimes it will charge from the wall socket and sometimes it wont!
    It will go so far as to turn off because of no battery life! Then I plug it in to the Laptop and it starts charging!

    I have had this problem for some time. It applies to both a wall charger (the one that came with iPhone and a third-party model) and a car charger (third party). Both wall and car chargers are rated at 1000 ma which should be enough power. Yet when the battery charge goes below a certain level the phone will not charge from wall or car charger, but it will charge from a computer.
    I did some research on USB power. Per specification, a USB client (the iPhone) cannot draw more than 100 ma from the USB host (charger or computer or hub) unless it asks for and gets permission to draw more current. (This is so it does not interfere with other USB devices connected to the host.)
    Inexpensive wall chargers do not contain any computing elements. They short the D+ and D- lines together. This makes it impossible for a client to negotiate a higher current draw, so the iPhone, working per the USB standard, limits itself to 100 ma. When connected to a computing device such as a computer or USB hub, the iPhone can negotiate a higher current, up to the 500 ma currently allowed by the USB standard.
    This begs the question, why can't the iPhone charge on 100 ma when the battery is almost completely discharged? After all, when the battery has more charge, the iPhone will charge nicely from a wall charger. Perhaps someone has some insight into this aspect.
    There is evidently a new USB standard for wall chargers that will fix this issue. Both the host and client must implement in order for it to work. (I haven't read the standard, but suspect it involves the client detecting that the D+ and D- lines are shorted together.) Obviously, either the charger or my iPhone 3G don't comply with this new standard. Maybe the iPhone 3GS does? Or maybe we have to wait for another iPhone model that has the hardware that complies with the new USB wall charger standard.
    Meanwhile I have to be careful not to fully discharge my iPhone battery when I am away from a computer. I recently went on a 30-day trip and had no problem because I charged the phone every night. Of course, I did not use it much because it was an international trip and AT&T roaming rates are horribly expensive.

  • My iphone 4 will not charge from the outlet have to charge it from my computer

    my iphone 4 will not charge from the outlet have to charge it from my computer

    Try another outlet to make sure that isn't the issue. If it still doesn't work you will need to replace your charger.

  • Iphone 4s will not charge from wall charger, only from computer usb

    Well My iphone 4s has starting acting up. The phone will not charge from any of the apple wall chargers I have. I have also tried various apple cables. The phone will charge from my Macbook Pro's usb port.
    I have also did various restores to the phones software/phone, it is running ios 7.0.6
    Any help would be great I was trying to hold out for the iphone 6, and don't really want the 5s......

    Hi there 97t-bird,
    You may find the troubleshooting steps in the article below helpful.
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/ht1476
    -Griff W. 

  • New iPad 3 will not charge from a mac. need help on that

    my new ipad 3 will not charge from a mac. need help why if any one knows? thk

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
     Cheers, Tom

  • After using Energie On The Go BB will not charge from wall

    My BB was out of power and I bought an Energizer Energie on the go to charge my BB and it worked fine. But since then the BB will not charge from the wall. I bought a new batery and same story. the plug con comes on when first plugged to the wall charger bt goes out in 3 sec. What's the deal? How can Fix? have tried removing battery and reseting several times but no luck.

    I guess it's possible that the charger block is faulty, and maybe you had a power surge that knocked them out, perhaps the cables are good which is why they charge with USB port on computer of in a car but the block the USB cable plugs into is bad thus when using a wall outlet it doesn't charge... Have you had to reset the GFCI for any outlets in your home??

  • My iPad will not charge from the wall outlet or the USB.  I also used three different chargers, as well as rebooting my iPad several times.

    My iPad will not charge from the wall outlet or the USB.  I also used three different chargers, as well as rebooting my iPad several times.

    Then it's time to make an appointment at your Apple Genius Bar at your Apple Store.  Apple will check it out and if it's defective and still in waranty (you don't say which model you have), it will be replaced.

  • My iphone 4 ran out of battery and now will not charge

    Yesterday my iphone was acting unusual randomly alerting me with a message saying something like the accessory you have plugged into your iphone is not compatable with this device(while my iphone was not plugged into anything at all). it had done this several times during the day untill had turned it off and then back on.  For the rest of the day no alerts had popped up. Later that night my iphone ran completely out of battery dead and now will not charge or turn on, while on the charger or not.  I have not updated the phone since i got it.  I just tried plugging it into my computer and my computer (PC)recognized it but said that the device could not be installed. Is there anything i can do?

    You most likely have dirt, moisture or a bent pin in the dock connector on the phone. Inspect it with a magnifying glass, and if it's dirt do your best to clean it thoroughly. A dry toothbrush frequently will fix it.
    If that doesn't resolve the problem the phone needs to be repaired.

  • My ipod 5 will not charge. It died and now will not charge to turn back on. What should I do?

    My Ipod 5 will not charge. It died and now will no charge to turn back on. What should i do?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    Also
    Not Charge
    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar                          

  • My iphone 5 will not charge from a plug socket or through a USB, on my computer it is displaying USB device not recognized but it used to charge fine can someone help me?

    i have had my phone since christmas, i recently returned it because of white boxes at the top of the screen, i got a new iphone all together because the problem could not be fixed. my phone was working perfectly and now all of a sudden it will not charge and i do not know why, please can someone help me try to solve this issue.
    thank you.

    can someone please help me!

  • I was on my phone and after my last call it now will not charge or even respond to any thing???

    I was on a call around 7 something to night and after I hung up my phone turned off and now it will not charge or even respond to any thing????  I did not drop it or anything like that???  I have a case around it protecting it too...I took the case off and still no response?

    Hi,
    See Here for
    Device Frozen
    http://support.apple.com/kb/ts1445
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

Maybe you are looking for

  • External monitor detected but no picture

    I recently tried hooking up my 17 inch LCD gateway monitor to my 13 inch mac. My mac detects it and lists it under display properties however it does not actually have a picture on the monitor. The gateway just stays black or powers on and then goes

  • Create Delivery against multiple PO's

    Abap GURU,            I want to create delivery against a multiple PO's . How i create it? Is there any BAPI or Function module available ? That function module shuld satisfy following condition:          Batch Split          Partial Delivery.   I wi

  • Problems with the transcode settings in Encore cs5

    the load of the transcode setting in Encore does not work? the surface of encore begins to flicker when a sequence or a timeline-is imported? I need help and tips! greetings, julius

  • Cffunction error

    The argument TEAM passed to function SearchRes() is not of type numeric. If the component name is specified as a type of this argument, the reason for this error might be that a definition file for such component cannot be found or is not accessible.

  • Interactions losing sound after being published

    All of a sudden interactions that have had sound applied to them are no longer playing thoses sounds once they've been published. I've checked them in Captivate and the sounds are there when you try them out in the wizard. Anyone else had this happen