Loud Screeching Noise through the Headphones on my Zen Touch?

I've had my Zen Touch for 2 days and it was working fine until one time when I tried to use it all I heard was a high-pitched noise coursing throughout my headphones. I can hear the music slightly but it is massi'vely overpowered by this noise. The noise is almost like the noise you hear when your modem logs online. I've tried changing the EQ settings and trying different tracks, basically everything. Anyone know what to do?

I've tried the headphones on a different source (my computer) and they seem to be working fine. Also, I have tried a different pair of headphones on my Zen Touch, which yielded the same result of a loud screeching sound. I checked the headphone jack with a flashlight and it appears to be clean.Message Edited by juxtapose on 02-5-2005 09:48 PM

Similar Messages

  • Screeching noise at the beggining of my project.

    Everytime I record a video and I play it back in my bin, and it plays back fine. However once I put it up into a project, there is a really loud screeching noise at the beggining of the video. Has anyone had this problem?

    I'm reviving this thread, because I'm still having this problem.
    I've tried turning my speakers on mute while recording, and I've tried turning my mic down all the way while playing video back.
    Any other suggestions, any help at all would be awesome.

  • My ipod video wont play sound through the headphone jack or the bottom connector

    Hello everyone. I have an iPod Video 60GB (supports video output through the headphone jack). Which I believe was the last one before the iPod "classic".
    Anyways awhile back it stopped outputting sound through the headphone jack, I assumed I had damaged the jack itself as commonly happens but it stopped outputting sound through the dock connector to my ipod speaker dock and my cars ipod connector. The clicker wont make any noise either.
    When I tried to search for an answer to this problem years ago I couldnt find anything and knowing it would be out of warrenty I put it aside and forgot about it. Having searched again recently it seems as if this could be the audio processor or some component on the board coming loose? Has anyone outlined this problem with pictures and steps to repair it?
    I *may* take it in and pay the $30 but I would much prefer to fix it myself. Thank you for any help with this.

    Update: The model # is MA147LL. Not sure why my edit didnt take effect.

  • I connected my brand new iPod Classic 160 GB to my brand new Sony home entertainment system through the headphone jack (to the audio line in). The volume is ridiculously low. Can somebody help me out here?

    I connected my brand new iPod Classic 160 GB to my brand new Sony home entertainment system through the headphone jack (to the audio line in). The volume is ridiculously low. Can somebody help me out here?

    Make sure the volume on the iPod is turned up fully, since this will affect what you hear through the stereo.
    Make sure Volume Limit is set to full. (From Main Menu, Settings/Volume Limit)
    If you purchased your iPod inside the EU (European Union), then the maximum volume from the headphone jack is lower than elsewhere in the world. If this is the case, buy yourself a 30-pin Dock Connector to 3.5mm jack lead, such as the one linked here...
    http://www.amazon.co.uk/Decrescent-Connector-Stereo-Auxiliary-iPhone/dp/B007NIE5 EE/ref=sr_1_1?ie=UTF8&qid=1386012456&sr=8-1&keywords=30+pin+to+3.5mm
    That connector will take a higher volume out (than the European Union's output) and that will be louder (and hopefully loud enough) through your stereo.

  • Loud screeching noise

    not sure if this is something on my end or what, but my whole family has AT&T. i am the only one with the iPhone 4s well when my friend calls me from his Verizon iPhone 4, sometimes when i answer i hear this horrendous loud screeching noise! he claims it is my phone. he never hears the noise. but it only happens when he calls.. not when i call him or when anyone else calls me... but it doesn't happen to anyone else when he calls them... is this an apple or AT&T issue?? sometimes it happens more frequently than others and it is getting really annoying to have to answer his call, listen to the noise, hang up, then call him back and hear him scream because my phone is a piece of crap. anyone else had this happen to them??

    his phone is crap, and so is his network provider.  its definitely not your phone.  all phones experience this on occassion, sometimes when the signal is weak. if this doesn't happen when anyone else calls you, just him, then that's a pretty clear indicator that it's got to do with him, and his phone, not yours (you've got a 4s, the best phone on the planet).  verizon *****, their network technology is inferior in every way. i would suggest you either convince him to move to at&t or stop being friends with him?

  • Why would the audio play through the headphones but not the speakers?

    I am working on an app that has embedded video. The audio works fine through my speakers and headphones as it does for some of my coworkers, but I also have other coworkers who get audio through the headphones but not the speakers. It's a variety of devices, 4, 4S, and 5. Any thoughts?

    If you are working on developing an app perhaps you should try the developers forum.

  • Is there a way to connect an external speaker (for another room) through the headphone port

    Is there a way to connect an external speaker (for another room) through the headphone port  & still hear sound through the internal speakers?  System Preferences/Sound/Output or Sound Effects allows you to use one or the other  --  headphones or internal speakers.  I would like to have the option of hearing music through the internal speakers in one room, & through an external speaker in another room at the same time.  I also do not want to frequently disconnect/reconnect the external speaker from/to the headphone port as I know over time the connection could become loose.  (10.7.4  Lion)

    dont think so but I could be wrong
    as it were I didn't like the build in audio so I connected some external logictech 2.1 speakers  but there
    are times when I use headset so I bought this one
    or any minijack splitter will work too so I have 2 things connected to the headset port works just fine
    http://www.belkin.com/IWCatProductPage.process?Product_Id=404634

  • My iPhone 5 is suddenly having audio issues through the headphone jack.

    So this is a strange situation, and I'll try to explain in depth so that someone might be able to suggest a solution. As reference, I have an iPhone 5 that I purchased in late-February. I've had every other model of iPhone except for the first iPhone, so I am pretty familiar with the device. I used to be on AT&T, and switched to Verizon when I upgraded to the iPhone 5.
    Two days ago, I was on a six hour road-trip, and I'd been playing my music like normal through my car's auxillary cable. After stopping for lunch, I went to plug my music again, but once the music started to play, I realized that only the drums were playing at normal levels while the vocals were very, very soft. I switched through a few different songs, and realized that all the songs were being played at different levels; sometimes the backup vocals were normal levels while the instrumentation and lead vocals were quiet, or vice versa. I decided to plug my iPhone in to charge, and when I did this, the audio levels were all normal. However, the iPhone was NOT charging. I removed the charger, and the audio went back to being weak and distorted. I went back and forth at this for a bit, trying to figure out what was going on.
    Since then and after some testing, I realize that my iPhone will now only charge anywhere EXCEPT in the car charger (I simply use my USB cable that came with my iPhone and plug it into the power adapter I have in the car). This morning, I tested the audio in my home speaker system, and I had the same audio issues. Only half the song's tracks would be at normal audio levels, while the other half would be at a very quiet, almost nonexistent level. I tried plugging my charger into the phone to see if that'd make a difference, but instead of the audio going back to normal like it does in the car, the music stopped and there was just crackling and very noisy distortion sounds.
    I'm super confused and not sure what to do. This has never happened to me with any of my iPhones. I am updating my software right now, and am hoping that that may help somehow. Otherwise, I'm at a loss. Any suggestions as to what I should do would be greatly appreciated!

    Do the new iMacs have digital audio out through the headphone jack?
    Yes.
    http://support.apple.com/kb/SP576

  • When playing my ipod on an ipod dock the vocals are very faint. It is fine when doing through the headphones. I am trying to sync for updates and getting the message "An unknown error occured (-1)" - help

    When playing my ipod on an ipod dock the vocals are very faint. It is fine when doing through the headphones. I am trying to sync for updates and getting the message "An unknown error occured (-1)" - help

    Error -1
    Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
    The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    Also see:
    -1 error
    -1 error too

  • My sound is coming from my built in speakers instead of through the headphone jack.

    I have an Envy 15 1270ca and last night it froze while I was listening to music, forcing me to manually shut it off by holding down the power button. When the computer came back on, my sound was coming out of my built-in speakers instead of my external speakers through the headphone jack. I checked the speakers through my mp3 player, so I know that they are working, so it seems to be the jack which is not working.
    Any help is appreciated!
    This question was solved.
    View Solution.

    Please Reinstall the sound Drivers and Make sure that the no ear phones are plugged in when we reinstall the sound drivers, this should work even after doing this if its not working then please set the BIOS to defaults this should work
    I am an HP employee

  • Noise on the headphone jack

    Hi, there.
    I've head this iBook for about a year and a half now and, apart from a couple of minor issues, it's been sort of OK. Here are the problems I've had so far:
    1. There is a small hump on the inner left edge of the display (there since I took it out of the box);
    2. The smaller ENTER key doesn't fit well because of the wiring underneath it and sometimes doesn't work;
    3. I get noise on the headphone jack that I just can't get rid of.
    I'm pretty sure there's not much anyone can do about the first two (especially now that the warranty has expired), but there must be something I can do about this noise thing. I've already tried all kinds of simple things that one can do in a situation like this, but so far nothing's worked.
    Essentially what I get is always the same sort of noise which reminds of the noise you get from cheap portable CD players or, if you're old enough, the noise from a tape player. Sometimes when I switch applications this noise goes away only to come back when I switch again.
    I've also had a similar problem for a while that simply took care of itself, i.e. there was static (noise) on this same jack which would go away if I pressed my finger on the display open button. Funny, eh?
    Now, if anyone has had this problem or you know how to fix it, I'd be grateful if you'd enlighten me.
    Thanks.
    12" iBook G4, 1 GHz, 256 RAM, 30 GB   Mac OS X (10.3.9)  

    Hi risto
    Welcome to Lenovo Community Forums!
    Try Downloading and installing the drivers back
         Realtek Audio Driver for 64-bit Windows Windows 8.1
         Realtek Audio Driver for 64-bit Windows windows 8
    See if problem persists
    If Yes
    Go in to Control Panel
       Hardware and Sound
              Sound
    Click on the Playback Tab
           Highlight your speakers with Realtek High definition Audio and click properties down on the lower right corner
                       You will have a new window, click on the enhancements TAB and place a check on Disable all Enhancements, Hit "Apply' Then hit OK"
    and check the Sound again if it is OK now
       This guide is on this Article titled "Test 5: Disable All Sound Effects In Windows 7"
    the guide applies to Windows 8 and 8.1
    If this guide still did not fix the issue try disabling or mute to Microphone see if that works
    Hope this helps
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • HT2693 The sound will no longer come through my headphones on my iPad I've tried several different headsets.  The sound works as normal without the headphones but will still not come through the headphones even thoug I have tried to reset it twice. Please

    The sound will no longer come through my headphones on my iPad I've tried several different headsets.  The sound works as normal without the headphones but will still not come through the headphones even thoug I have tried to reset it twice. This is the new ipad with retina display and is only 2 months old and otherwise works fine. Please help!

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPad. Nothing will be lost
    Reset iPad: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPad for a refurbished one for this price. They do not fix yours.
    iPad Service Answer Center                 
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPad Repair - iFixit

  • I have a iPad and I connect it to my tv through hdmi but would like the sound to come out through the headphone socket, can I make this happen

    I have a iPad and I connect it to my tv through hdmi but would like the sound to come out through the headphone socket, can I make this happen.

    Go to System Preferences>Sound>Output  and make sure that you selected the right output. I think if yo use HDMI you might not be abe to select another output.

  • I just purchased Duet 2 and am using it with Garageband 11. I am getting iTunes playbacks through the headphone monitors with Duet 2 but can get no guitar or vocals recorded.  I get no volume

    I just purchased Apogee Duet 2 and am using it with Garageband 11. I am getting iTunes playbacks through the headphone monitors as per quick startup directions. When I open Garageband I get the same identical stack of guitar and on pedal displayed.  I get no sound from the guitar.   I believe I have the set up exactly as per diagram and cannot figure things out.  I am relatively green at this - my best intentioned purchase now feels like a nightmare!!  Help!!

    Yes, you can upgrade to Snow Leopard:
    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    and in the UK:
    http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    but nobody knows for how long it will be available.
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
    http://support.apple.com/kb/DL1399
    Check via Software Update whether further updates are required.

  • How can I turn off the Ipod 5g speaker so it just plays through the headphones?

    How can I turn off the Ipod 5g speaker so that it just plays through the headphones?

    First make sure your headphones are plugged all the way in, meaning no silver from the headphones plug can still be seen.
    If that's not the issue, try a hard reset of the Nano.  To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    B-rock

Maybe you are looking for

  • Qualtiy Degradation

    I am compressing two rather large QT files, total run time about 3 hours and 30 minutes. As this is going from FCP to DVD Studio Pro and I am working on my powerbook, the compressor times are quite long, roughly the realtime for the videos. It would

  • I can Wake over the Internet with WRT54GS v2 and Tomato Firmware perfectly!

    However, this router won't last forever.  Do any of the new routers allow Port Forwarding to a broadcast address, which is necessary for Wake on WAN because of ARP release and renew?  Just spent the week on vacation and several different issues came

  • Downloaded Safari 4.0.3 upgrade and Safari will become unresponsive. Why??

    Periodically the new version of Safari will become unresponsive when I click on a web site. Any web site. The spinning beach ball starts and never quits. I have to force quit and start it back up again. I hope that Apple is working on a fix for this.

  • Importing movie clips issue

    Our company is creating a marketing project to be distributed on CD. We have purchased Studio 8 for Mac and I have been given the task of implementing Flash. First, a question about structure. We want an intro animation to loop continuously until use

  • Changing row color according to condition statement

    Hi, Is there a way that I can color a row or field in a report according to a condition? For example, can I color red all rows where an amount is over 1,000? Or can I just highlight the field that answers to the criteria? Thank you. Leah