Loud static when answering phone

Hi I get a very loud static sound for 1 sec when answering my 8330 phone, people on the other complain of it as well. is there a fix for this? very new to blackberry phones
Thanks
Ray

I have begun having the same problem. It is really loud and I have learned to answer with the phone far from my ear for the first second or so, but this still doesn't help the person being blasted on the other end. Does anyone know what causes this or if it is simply the beginning of the end of the device??

Similar Messages

  • Very loud Static when first making or receiving a call

    I am getting a Very loud Static (screeching sound) when first making or receiving a call 90% of the time.  Most of the time if I move the slider to a different position it will quit.  Other times I just have to call back.  Anyone having this problem?  Any solutions?
    Post relates to: Pre p100eww (Sprint)
    This question was solved.
    View Solution.

    Have you made a call with the slider closed? If the issue still happens it could be a loose wire or connection, or a network problem since it only when making the first call.
    I would take the device into the sprint store and have them do a network reprovision of the device. The network reprovision is a process where they delete the account on the network side and set it back up on the network side and program the phone with the new settings. If that does not resolve the issue then you can have the device warranty replaced right there at the sprint store.

  • Setting speaker as default when answering phone

    Hello All:
    Does anyone know a way, when answering a call, to set the speaker (handsfree) as the default?  I mount my Q10 on my windshield when driving and when a call comes in and I accept it I would like it to default to speaker automatically.
    Kind regards,
    Cg

    NewTabURL extension
    https://addons.mozilla.org/firefox/2221/

  • Motorola 850 Very slow to connect when answering phone

    I have just connected my BT Motorola HS850 to the Iphone and the pairing went well. When I tried to answer the phone using the BT device I did not receive any audio nor could I transmit for about 9 seconds after I answered the call. Any ideas?

    Hi, I'm having the same issue also with Motorola HS850. The headset worked fine with my Blackberry Pearl.
    Thanks for any advice.

  • Mic delay when answering phone (4S)

    When I answer my new iPhone 4S, there appears to be a delay during which the mic output is muted. I need to wait approx 2 seconds before speaking when I answer the phone, otherwise the other party cannot hear me. I have already received a replacement unit from my local Apple Store and both phones exhibit the same behavior.
    Guessing this is a problem easily solved with a software update. Apple, please help!!!

    Anyone who agrees this is not a hardware problem but likely a software issue? Could it also have something to do with the proximity sensor activating the mic based on the phone's position near your head? Maybe the sensor determines whether the mic is active based on your proximity to the phone when not using speakerphone. For those of us who start saying "hello" as we're raising the phone to our heads, that could be the issue.............?
    Either way, easily fixed with a software tweak.

  • Loud static when connected to car through aux cable?

    I've got my iPhone4 connected to my Mini Cooper through an aux cable and the static is unbearable. At first, it would hiss for 2-3 seconds before going away but now it's all the way through songs and super sensitive to touch (especially I touch the iPhone4 on the edges). This happening to anyone else?
    Didn't happen with my 3g or Nano. Bought the Belkin Cable in the Apple store a year or two ago. Wondering if a bumper (which I'm planning on buying anyway) will limit some of the interference that's possibly moving through the antennae and into the aux cable?
    Thoughts?

    hi - theres a griffin cable that worked for me.... specifically made for this issue - for some reason its worse with the ip4, I also have a mini and it drove me crazy until i got this.....
    http://www.griffintechnology.com/products/noise-reducing-audio-cable

  • Loud static on left speaker when playing music

    Well I have officially tried everything in my power to fix this problem. it is probably not much to some, but nonetheless i am annoyed by this software.
    anytime i wish to play anything on iTunes 7, only LOUD static comes out of the left speaker of my laptop. even when the volume is low. I have been to the quicktime menu to fiddle with the safe mode and frequency. uninstalling and reinstalling is hopeless. and i thought it would fix itself when an iTunes 7 update came out, no.
    also, i am not sure if this is connected, but anytime I wish to play a video on iTunes it closes and i get the send error report message. and when trying to play it in quicktime every video doesnt play and all the titles are "Untitled 2" while it play perfectly in the IE windows.
    i would really like to get matter solved becuz all my music is so well organized on itunes and i dont want to start that process over for a new program.
    best regards
    kevin
    HP Pavilion DV1000t   Windows XP  
    HP   Windows XP  

    Try cleaning your phones dock connectors contact surface with toothpick.

  • Help. I can´t slide to answer when the phone rings, and i´m missing a lot of phone calls! It doesn´t happens all the time but quite enough to be annoying. I´v restarted and updated it. Suggestions? Thanks

    Help. I can´t slide to answer when the phone rings, and i´m missing a lot of phone calls! It doesn´t happens all the time but quite enough to be annoying. I´v restarted and updated it. Suggestions? Thanks

    When you said you have no fax machines on your line, that does include computers directly connected to the phone line?
    The reason that I ask is a computer with a dial-up modem (a non broadband modem) that can connect to your phone line, can have software that makes the computer act as a fax machine.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • How do you fix the 2 to 3 second voice delay when answering iphone 5 this is with multiple carriers and its unaceptable on a phone that cost almost 700 dollars it did not happen on my cheap prepay samsung

    how do you fix the 2 to 3 second delay on hearing somones voice when answering the iphone 5 this happens on lots of  iphone 5s with differant carriers so its not one carriers problem its probably apples this is unacceptable on such an expensive phone and very irratating. my last cheap samsung t mobile 50 dollar pre pay never did this,im new in my  contract an will take the phone back if i have to put up with this for 2 years.other than that huge problem i love the phone. i dont understand why this did not get covered like the maps problem,cause its a lot of phones and its probably an ios problem.

    Wow!
    I'm not going to be of much use regarding answers but I sure am going to watching this post like a hawk for any replies. My package is a slightly diluted version of this and I do find the BBtalk and data limits hard to make the most of as well.
    If nothing else this totally highlights how complicated BT have managed to make their packages.
    A cynic would assume that they are trying to catch us out at every step and for us to either be overspending or not really getting the moneys worth.

  • My phone goes straight to answer phone when people call

    My iPhone 4s sometimes goes straight to answer phone when people call. I don't hear the phone ring at all. It's really frustrating as I miss important calls.

    If you see a Crescent Moon icon in the top status bar, check: Settings - Do not Disturb = Off

  • My iphone 4s when some rings me it keeps going straight onto answer phone

    could you please tell me why my phone doesnt ring and keeps going onto answer phone straight away, it doesnt matter what area I am in at the time.

    If your carrier is Verizon and you are using the phone for data calls will go to voicemail, because the Verizon network is incapable of simultaneous voice and data.
    Also, if you are in a busy area the carrier's network may not have sufficient capacity to allocate a channel to your call when it comes in.

  • Phone Cuts Off When Answered And Can Not Make Outg...

    Problem only stared today,and BT Infinity is working fine.On incoming calls the phone rings and when answered it cuts off.
    When we try to dial out we have a dial tone ok and it dials the number then we get the message 'This number can not be recognized' and we have tried about 10 numbers.

    Do you have the phone plugged into the bottom socket of the master socket?
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Loud static in headphones when plugged into laptop

    Whenever my headphones are plugged into my laptop, there is a loud static/white noise. It's there all the time, but the sound is fine  if on speakers. This problem just started

    Restore it from your backup.
    No idea what she has running on her laptop, but the iPhone appears just like any other camera. Sounds like something on her machine decided to go ahead and import the photos. They may actually be on her laptop.

  • Loud static on speakers which disappear when I mute Plugin Container for Firefox on Volume Mixer

    When I started my laptop this problem appeared. There is no static when I mute the speakers on Volume Mixer, which mutes Speakers, Windows Sounds and Plugin Container for Firefox.
    When I only mute Plugin Container for Firefox it also silences the static.
    Could the problem be here?

     Welcome to the HP Support Forums!  JohnWhite, 
    I understand that your speakers on your HP Pavilion g7-2325dx Notebook PC continues to emit sound when you plug your headphones in and that you got an error stating "audio device isn't set as default". I will try my best to help you with this.
    Try the following steps. 
    1. Click Start 
    2. Go to Control Panel 
    3. Select "Hardware and Sound"
    4. Select "Sound" 
    5. Right click the box and choose "Show Disabled Devices" 
    6. Make sure that your audio device is enabled for your notebook. It should have a green check mark.
    7. Then in your Audio system under the Enhancements tab, check the box for "disable all enhancments".
    If this does not resolve your issue, then I suggest reinstalling the audio software and driver Using Recovery Manager to Restore Software and Drivers (Windows 8).
    I hope this information helps, please let me know how it goes.
    Take care and have a great day!
    I worked on behalf of HP.

  • I answered a FaceTime call on iPad and my phone was also ringing when the phone stopped it hung up the iPad call. How do I correct. New 7.0 issue

    I answered a FaceTime call on iPad and my phone was also ringing when the phone stopped it hung up the iPad call. How do I correct. New 7.0 issue

    Im having the same problem after installing ios7.1
    Checked the usb status and it sees an iphone ( 4s ) attached,
    Repaired disc permissions
    updated and reset iphone
    and itunes
    reinstalled mavericks from scratch
    phone alert saying " TRUST THIS COMPUTER?"
    hit trust
    same alert keeps appearing
    again and again
    itunes keeps wittling on about "iTunes could not connect to this iPhone. You do not have permission."
    what the actual F*** is going on and can anybody help ??????

Maybe you are looking for

  • SLOW PERFORMANC​E OF SHARED VARIABLES

    Hello, We have developed application in LabVIEW 8.6.1 for testing mechanical equipments using cRIO 9074 (Real Time controller). In this application we have used shared variables (Network published) for communications between Real Time controller and

  • Loading Textures in CS5

    When I go to load a texture in the Texturizer Filter from one that I created, I see a hard edge no matter how I scale it. I tried saving my created .psd textures at the same resolution as the presets, and even tried doubling the file size, but no mat

  • How best connect x220t to TV screen?

    Forgive my ignorance - have not owned a tv for some years. Shortly to take delivery of this model new 2013 Sony Bravia tv which has wi-fi direct, dlna, all that stuff. I have a x220t laptop and my movies are either on that or the home NAS. Wondering

  • No category for Apple's new App Store?

    I was hoping to ask a question regarding Apple's new App Store, or make a suggestion in that regard. But there doesn't even appear to be a category about the App Store under the Discussions at all. When will Apple include Discussions on the App Store

  • OCS Database structure

    Can I find OCS database structure anywhere ? I'm making definitions for a customer to migrate their current email system to OCS. Current system is nor Outlook neither Lotus but Teamware (Fujitsu) and I think I have to do data conversion programs from