Loud volume after phone call. iOS 5 iPhone 4

I'm having an issue where my ringer volume seems to be up all the way after ending a call, no matter when it's set to. If I use the volume buttons and turn it all the way down, the lock sounds and dialing tone (when you press numbers in the phone) is still extremely loud. I use the volume buttons to change "Ringer Volume" all the way down to one notch, then use the app switch's volume slider and turn it all the way down. Still max volume. The only way to get it back to normal is to go to Settings > Sounds and move the volume slider there a bit, or to open Music and start playing a song. Then everything goes back to normal. What's causing this? It's very annoying.

Just for a little clarity, the volume isn't actually turned up after the call, it's still in the same location. The sounds themselves, however, seem to be as loud as possible. I can change the volume with the app switcher slider and the volume buttons, but they do not change how loud the sounds are until I go into settings > sound and move that slider a bit.

Similar Messages

  • IPhone apps not resuming after phone call - iOS 7 bug

    iPhone apps not resuming after phone call - iOS 7 bug
    With iOS 6, while playing music on Spotify or playing Candy Crush, etc, if the phone rang and I answered, or if I made a call, once the call was ended, the app I was using would resume. The music would start playing again or the game would resume.
    In iOS 7 this isn't working. Listening to music, I answer a call, music stops and when call is ended, nothing! the phone stays on the phone app.
    anybody else see this behaviour?
    thanks!

    Any ideas anyone?
    thanks

  • Has anyone noticed a problem with low/no volume after update to iOS 8.1.3 ?

    HHas anyone noted a problem with low or no volume after update to iOS 8.1.3?

    Although this reply is late.  I just want to share that I have the same issue - no LTE after upgrade to 8.1.3 on my iPhone 5.  No matter switch on/off iPhone or LTE option or Airplane Mode -  they all didn't work....but after an upgrade to 8.2 today.  I got my LTE back now after a month...not sure if it is a bug or a reset work.  Good luck to anyone who looking for the resolution of same issue.

  • I am not able to answer talkatone phone call when iphone is in lockscreen, I am not able to answer talkatone phone call when iphone is in lockscreen

    I am not able to answer talkatone app phone call when iPhone is in lock-screen mode.  I miss all calls because by the time I unlock my phone the notification disappears and there is no way to accept the call.  What can I do to be able to answer calls via the talkatone phone app from the lock-screen mode? 

    Did you try what I suggested in the post you already made for this problem?

  • Can not turn on redirect phone calls on iphone 4S. What can i do?

    Can not turn on redirect phone calls on iphone 4S. What can i do?

    Contact your carrier to insure that there is nothing wrong with your account. SMS is a carrier feature, so start there.

  • Changing volume for phone calls.

    is there any way to change the volume for phone calls besides the outside volume key?? I tried "sounds" in settings and it did not work.

    Your volume switches work differently depending on what you are doing. You may get a readout above the "speaker" symbol that appears on the screen telling you what volume is being adjusted.
    If you are not using anything, the volume switches adjust the ringer volume.
    If you are playing music or video, they adjust the music/video volume.
    If your headphone are plugged in, they adjust the headset volume.
    If you are actually on a call, the adjust the earpiece volume or speakerphone volume (without a readout).
    If you are on a phone call using bluetooth, they adjust the bluetooth volume.
    Dial a recording like the National Time Signal (303) 499-7111 and adjust the volume during the call.

  • DLNA shows up after phone calls

    After every incoming call I get on my Droid X, DLNA pops up.  I don't use DLNA.  But I cannot stop it from popping up which it does without any interaction from me.  Since I cannot delete it from the phone (which I'd like to do) and since it has no settings to configure to stop it from executing, how can I get it to stop loading after phone calls?

    If this is happening on the current software update, there could be a way of clearing it out.  Instead of master resetting the device (also an option if these steps don't work), try clearing the cache on a few related applications. 
    Go to setting> applications> manage applications> all.  Clear cache/data/force stops on the following applications: Dialer, Dialer Storage, DLNA, and Phone.  Remove the battery after doing this. Retest this and see if it resolved the issues with DLNA popping up.  
    If this does not can someone try a master reset (steps) to see if this resolves the issue if the above steps do not?  Please post the results.  I researched this as much as possible, but I haven't noticed a common trend.  
    Thanks for bringing this to our attention, and please follow up with the results. 

  • Iphone crashes after phone call

    My iphone 3gs will crash immediately after completing a phone call. I don't even hit "end call". Crashes as my lower the iphone from my ear. Need to do a reset each time. Any suggestions?

    Do you have a case on it?
    Try removing it and see if that helps. A case can block the proximity sensor.
    You can try a restore as well.
    http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf

  • HT1688 iphone plays recent podcast after phone call.  this is after recent update.

    iphone reverts to last played podcast after making a phone call.  I thought this was fixed by last update, but apparently not - is there a fix?

    Exactly the same problem - iPhone 3GS 16G, updated it on Wednesday and has rebooted at varying times during calls. Went straight to the Apple store to be told to try a restore. There was a carrier update when I connected to iTunes about an hour ago, so I wondered if that would make a difference. I'm with O2.
    Did some test calls to my dad, it was good fun trying to pad out a conversation knowing that we were both waiting for the phone to cut out!!
    First reboot was after 7mins, then at 18mins 31 sec.
    After this reboot I decided to make sure that the only app that was running was the phone app. Strangely, when the phone reboots itself, it doesn't close the apps that are multitasking, so when the phone has restarted they are still there.
    I closed them all down and managed a 20min phone call with my dad, then he had to go out so we hung up.
    After reading this forum I'm reluctant to restore my phone as it seems a lot of effort for no reward whatsoever!
    Not impressed, Apple were my technology fave until this! Its worse than Microsoft's blue screen of death!
    Sort it please Apple!

  • Why can't I use speakerphone after TTY calls? iPhone 6

    After making phone calls on my iPhone 6 using my apple earbuds, if i try to make a call at a later point without the earbuds, I cannot use speakerphone. Does anyone have an idea why this happens?

    Why? TTY is a feature for connecting the phone to a Text Telephone, a device used by the Deaf. If you are not Deaf or communicating with some who is, there's no reason to use that. Go to Settings>Phone and turn TTY off.

  • Cannot end phone calls on IPhone 5 by pushing END

    Cannot end phone calls by using the END button, have re formatted for new phone 2 times, works for a short time and then stops working again have also re set Network settings Have contacted Apple and was told to re format as new phone which I did, still does not work long.

    Howdy morrissign,
    I read your post, and it sounds as though you'd like to learn how to silence your device. I have linked to an article that will instruct you on how to do that:
    iPhone Buttons
    Adjusting the Volume
    When you're on the phone or listening to songs, movies, or other media, the buttons on the side of iPhone adjusts the audio volume. Otherwise, the buttons control the volume for the ringer, alerts, and other sound effects.
    To adjust the volume, use the buttons on the side of iPhone. 
    Flip the Ring/Silent switch to change between ring  and silent  modes. 
    When set to ring mode, iPhone plays all sounds. When set to silent mode, iPhone doesn't ring or sound any alerts or sound effects (alarms set using Clock do sound). By default, when you get a call, iPhone vibrates whether it's set to ring or silent mode. 
    If iPhone is set to ring mode, you can silence a call by pressing the Sleep/Wake button or one of the volume buttons once. Press a second time to send the call to voicemail.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Resume streaming audio by using MPMoviePlayerViewController after phone call is ended

    Hello,
    I am implementing an universal app. In which I used MPMoviePlayerViewController for playing streaming audio and its working fine. But when there is call during playing the streaming audio it stops. I also posted a question on Stack Overflow but no output (http://stackoverflow.com/questions/16333501/resume-mpmovieplayerviewcontroller-a fter-ending-phone-call/16333616?noredirect=1#comment23431276_16333616). How can I resume streaming audio after call is ended. Is there any way so that I can achieve this? Please help me out.

    See:
    iOS: Troubleshooting applications purchased from the App Store
    Contact the developer/go to their support site
    Restore from backup. See:
    iOS: How to back up
    Restore to factory settings/new iPod
    BTW this is the iPOd touch forum

  • Very Low Volume on Phone Calls - Can barely hear the other person

    Just picked up my iPhone 4 at the Apple Store. Tried to make a phone call the the call volume is so low I can barely hear the other person calling.
    The speaker volume is not much better. The other person can hear me fine and says the sound is great.
    The volume dots are all the way up.
    The settings sound voulme under ringer is all the way up.
    ipod volume lock is not activated.
    Any other settings to check out?

    OK now I don't feel like I'm the only one. I've also done a hard reset and still suffer from the same issue.
    Since it seems to be the popular question, no the plastic is no longer on my phone.
    To call the volume I'm hearing a whisper would be a overstatement. This is a much bigger issue than the antenna. The phone is basically unusable without headphones. Unfortunately I'm not very close to a Apple store to exchange.

  • Verizon iP4S signal loss after phone call

    So, I'm new to Verizon, long time ATT customer. So, I have a 4S, wife has a iP4. After i get done with many, but not all, phone calls, my phone completely loses signal and the carrier banner says "Searching." using 5.0.1. Wife's using iOS 5. I have done the *228 PRL update. Same thing, after many phone calls, loss of signal, have to wait to reacquire before making another phone call. Any hints or tips?

    settings - general - reset - reset network settings.
    also do a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
    If the above doesn't work, then suggest you contact your cell phone provider and let them know about your cellular data issue.

  • Freeze screen after phone calls end, upgrade problem

    Upgraded my 3Gs iphone to the last version software last week. Started to eperience problems with phone calls after the upgrade. A major problem is When incoming phone calls end, the screen freezes and does not let me do anything even cannot turn the phone off. anybody has a soloution?

    I too am experiencing this problem. It's only been a few days now, ever since I upgraded the OS and installed the latest version of iTunes last week.
    I don't know what the problem is, but I'm sick of it.
    Whenever I MAKE or RECEIVE a call, my screen freezes up and I can't do anything, not even a hard reboot.
    I dropped out of a call to someone and when they rang back I couldn't answer it. So very frustrating.
    As I write this I've just taken a call from my husband, hung up the call, and now the phone is as useful as a paperweight because I can't get any function to work on it, not even the hard reboot.
    If anyone from Apple is listening...What the **** is going on here?????

Maybe you are looking for

  • Import IMAGE type from SQL Server to BLOB in Oracle

    Hello, Is there a way to import a IMAGE type from SQL Server to BLOB type in Oracle from one table to another through a database link? I'm waiting for an answer as soon as possible. Best regards, Florin Edited by: Florin Manole on Sep 10, 2008 11:53

  • Last purchase order price during miro.

    Here is one issue ... We created one plant and maintain all possible required configs for it. Al possible transactions are working fine except one. When i create a Purchse order of say RS10 as its price. I also perform MIGO for it. Now before bill pa

  • How do I get the PID of a child process in java using JNI?

    I am writing an app in Java (for **nix) that will spawn multiple processes (using Process objects). I want to be able to get the PID for a particular child process (not the parent). How can I do this?

  • Update will not load on my mac (10.6 operating system)

    i have been trying to load the update 5.0 for firefox - it never completes - it will keep trying until i close it - does it take hours to load?? is there something i should do prior to loading??

  • Authorization please help

    Hi All, My requirement is we have 1 composite role which we have already assigned to the user but now we want to assign different composite role different from previously assigned one. the problem is we have around 900 users. i am looking for a repor