Loudness of music varying by itself when using iPod in iPad with other app

The loudness of music started varying up and down itself when listening to music using iPod and using other app simultaneously in iPad. Does anyone have got the same problem? Is it a hardware or software problem? How to fix it? Many many thanks

I agree, this is a huge let down. I didn't realize I was uploading low quality photos and people commented that my quality has gone down... so much for using this as a business expense for photography. I know people argue (just upload it from your pc) Well, this is a "retina display" High res, yadda yadda... so why isn't the app thats designed specifically for it?
Anyways, seems like an easy fix...
Strange.. all the ads are in high res...

Similar Messages

  • I purchased an used iPod nano 4th with many many songs on it,but when i hooked the usb cable to try and change the name,something went wrong.i had to reset it,thinking my music would still be there,but i lost everything! Is there any way to get these back

    I purchased an used iPod Nano 4th.with many,many,many songs and albums on it,but when i plugged the usb cable into my laptop(i am a new comer to computer) i thought i was changing the name and thought i was syncing but something went wrong and everything was gone! is there any way possible to get these back? Please I need Help!!! Thank you!

    Was the music purchased via your iTunes account and/or did you buy it from other sources or copy it from your own CDs, or did the music belong to the previous owner ? If the music was yours then you can sync it back to the iPod via your computer's iTunes. If the music is not still on your computer then have you got a backup of it ? If not then for iTunes purchases you might be able to re-download it depending on which country you are in. If the music was put on the iPod by the previous owner then you will need to buy your own copies of it.

  • LabView (8.2) hangs when using I/O operations with traditiona​l NI-DAQ 7.4.4 after aborting LabView program

    Hello!
    We have the following problem:
    LabView (8.2) hangs when using I/O operations with traditional NI-DAQ 7.4.4 after aborting LabView program
    We freshly installed LabView 8.2 (2006) and NI-DAQ 7.4.4 on a PC running Windows XP (Service Pack 3). We built a larger vi that remotely controls a traditional NI-DAQ card (AT-AO-10) on a second PC via NI-VISA 5.0.3. We were successfully running this program until a power failure caused the first computer to crash. After this crash we were unable to start the program again: LabView freezes while loading the vi. LabView itself can be started but freezes when adding I/O operations from the NI-DAQ palette to a block diagram.
    We have tried to re-install NI-DAQ 7.4.4, but it did not help. We then re-installed all NI software, but still no improvement. In the end we decided to reinstall ALL software, first Windows XP, then LabView and finally NI-DAQ 7.4.4. This worked. However, after a few days of running the program we had to abort LabView via Windows Task manager and afterward we again experienced the same problem as before: LabView freezes when loading the program.
    Obviously, we cannot afford to reinstall Windows every time. Are there any known Windows XP / NI-DAQ issues that might cause the freezing of LabView? We would be very grateful for any idea.
    Best regards,
    Matthias

    Hello Sprice,
    Browse the shipping examples according to “Directory Structure” and then select
    DAQ to find the Traditional DAQ examples. 
    There a lot of examples that are written for counters (Counter >>
    daq-stc.llb >> Count Edges (DAQ-STC).vi). 
    What kind of signals are your photons creating?  Are they TTL compatible at a certain
    frequency?  You don’t care about overwriting
    your buffer?
    Respectfully,
    Rob F
    Test Engineer
    Condition Measurements
    National Instruments

  • Is there a capability to save/export the time capsule settings file when using the iphone/ipad airport utility. the "file" button does not exist on the latest airport utility app.

    is there a capability to save/export the new airport 2TB time capsule settings file when using the iphone/ipad airport utility. set-up wasn't a problem but the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.

    the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.
    Sounds like you are a bit confused with version numbers.
    Latest AirPort Utility version for the iPhone / iPad is 1.3.3.  There is no option or capability to export/import settings on the iOS version(s) of AirPort Utility.....although you could take a series of screen shots and save them for future reference.
    AirPort Utility 6.3.x is found on a Mac.....not on iPhone / iPad. Export and Import options are found under the File menu in 6.3.x.

  • The problem is with the new operating system  and sending photo via email when used in my iPad.   From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow.

    The problem is with the new operating system  and sending photo via email when used in my iPad.
    From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow. This is solved by saving the email as a draft and opening the email again from mail.
    Can you amend he system to allow emails to be sent from photo as previously.

    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

  • When using Skype my IPad sounds like ocean. This is not a problem when I am on FaceTime or using other apps with sound.  Recently updated to newest IOS 7. First there was no sound for Kype and found that had to turn microphone sound on.

    When using Skype my IPad 2 now sounds like the ocean and I can barely here my contact.  This happened recently after IOS7 update. I did turn the microphone on for Skype as it was required after update.  Now my sound is terrible but only a problem when using Skype video call.  It is okay for FaceTime.

    Thank you!  Resetting resolved the issue with terrible sound when trying to use skype.  Sounds much better! 
    I am not sure what all changed when reset was applied to settings --- assume it defaults back to basic settings.  I have no idea what I had customized, so will slowly figure out.  I have noticed several things.  So far I had to add back my wallpaper and reenter password to get back on my wi-fi. 
    At least SKYPE is now audible.

  • When i connect my Ipad with My pc Itune is giving msg that " This IPad Cannot  use because Apple Mobile Devise is not started"

    when i connect my Ipad with My pc Itune is giving msg that " This IPad Cannot  use because Apple Mobile Devise is not started"

    You might want to take a look at this kb
    http://support.apple.com/kb/TS1538

  • When using facetime having difficulty with video, sound is ok.screen says reconnecting.

    When using facetime having difficulty with video.msound is ok. Screen says reconnecting

    There have been numerous reports of FaceTime problems for the last several days and it is unclear what the cause if. Following is one of many discussions of the issue: https://discussions.apple.com/thread/6096640?tstart=120

  • How to numberformat when using sql:query alogn with c:forEach JSTL tags

    Is there anyway to format the numeric values returned from the database when using <sql:query> alogn with <c:forEach> tags
    Here is my jsp code
    <sql:query..../>
    <c:forEach var="row" items="${queryResults.rows}">
    <tr>
    <td><c:out value="${row.COL1}" /></td>
    <td><c:out value="${row.COL2}" /></td>
    </tr>
    </c:forEach>
    Col1 values are numeric without any formats Eg: 1000, 10000, 1000000 etc.
    how can i format them to 1,000 , 10,1000 , 100,000 etc

    It is polite to mention what your answer was. These posts are not just here for you to ask questions, but to be used as a resource for other people to find answers. Saying "I solved it" with no details helps noone.
    I presume you discovered the JSTL <fmt:formatNumber> tag?

  • I hear music and noise whenever I use anything to do with audio.  How do I stop it?

    I hear music and noise whenver I use anything to do with audio.  How do I stop it????

    -> [[Troubleshooting extensions and themes]]
    Check and tell if its working.

  • When using printer Epson R1900 with Aperture 3 and if I mistakenly choose the wrong paper such as, epson's luster instead of glossy, does that change the exposure? Like make it too dark one or two stops!

    When using printer Epson R1900 with Aperture 3 and if I mistakenly choose the wrong paper such as, epson's luster instead of glossy, does that change the exposure? Like make it too dark one or two stops!

    Hi,
       If you choose the incorrect settings for printing, yes - the print quality will be affected.
    Different papers absorb the ink differently, so you can end up with prints that are too light, too dark, or have a colour cast if you make incorrect choices in your Aperture or printer settings.

  • When using Safari, my iPad 1 will end Safari and return to the home screen for no apparent reason, any ideas as to cause and solution?

    When using Safari, my iPad 1 will end Safari and return to the home screen for no apparent reason, any ideas as to cause and solution?

    See if the following help.
    Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data and also Clear History
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    Turning off iCloud and multitasking gestures on the iPad might also help.

  • HT201178 when using apple bluetooth keyboard with iPad, hitting the enter/return key while typing in iMessage only adds another line not 'send' the message? is there a setting to change that somewhere?

    when using apple bluetooth keyboard with iPad, hitting the enter/return key while typing in iMessage only adds another line not 'send' the message? is there a setting to change that somewhere?

    Everywhere that I've checked it is not possible to do this. I would like to even do this using the vkb. I hate having to stretch my thumb all the way up just to send a message. It's messaging, not a report or email. Seems backwards. Hopefully some day Apple can add this option.

  • Sand Box has stopped working error when using System Exec.vi with wait until completion is true

    I get the following error message in Windows 7 "Sand Box has stopped working" when using System Exec.vi with wait until completion set to true, if I set it to false there is no error message.

    Hello JJVerdi
    mmm well System Exec.vi simulates a DOS command window, can you run the sandbox from the cmd window using the same commands without any errors? 
    you may take a look to this KB, it may be related to your issue:
    http://digital.ni.com/public.nsf/websearch/2393462​BD57B854186256C4F007B706A?OpenDocument
    Regards
    Mart G

  • When using i-Cloud PAGES with another shared person, how to you shift ownership control of the file to the other who started as a collaborator?

    When using i-Cloud PAGES with another shared person who is a collaborator, how to you shift ownership control of the file to the shared person who started as a collaborator and needs to take over file ownership responsibilities?

    Thanks, but I have searched here but have not found or heard a direct answer to my question as stated above...

Maybe you are looking for