Loupe and Grid view rendering not as good as Develop view.

I recently see that while using LR 5.6 the images rendered in the loupe and grid views do not look nearly as good as the same image displayed in the develop view.  I have screen grabs if you'd like to see them below.  The Loupe and grid are not as saturated and the gradient in the sky is not nearly as smooth.  If I bounce between 'E' and 'D' it is pretty obvious.  Once in a while the 'E' (loupe) view looks the same.  I'm afraid that I will delete an image based on what I see in the Loupe or do unnecessary edits on an image.  When I exported to jpg, the images looked pretty good.
Grid:
Loupe:
Develop:

As far as what could be contributing to a difference, other than an actual bug:
LR Previews are stored as AdobeRGB JPGs, so Library previews go from LR-Internal color profile to AdobeRGB to Display color profile, whereas Develop previews go directly from LR-Internal color profile to Display color profile.  If there are some colors that are outside of AdobeRGB then some conversion may occur.  The conversion to 8-bit JPG is also probably adding banding that Develop wouldn’t show.  There might also be Relative vs Perceptual color profile conversion differences occurring.  I don’t know the specifics of which is used for the Adobe color profile conversion and whether what you’re seeing is outside the expected variations.
If you view at less than 1:1/100% zoom, especially with Fit or Fill, then small details that vary across the group of original image pixels that are displayed as one display pixel can be averaged differently due to differences in the downsampling algorithms used between computing Library file previews and computing Develop display previews where Develop’s is built for speed because it occurs in real-time after every slider movement, where Library previews are computed in the background and so can use a more accurate resampling algorithm.  Usually this is only a difference in sharp/smoothness but it can also manifest as a difference in tone if there are lots of tiny noise spots getting averaged together inaccurately in Develop or more accurately in Library.
Since I can see only a tiny difference between Library and Develop on my monitor in this particular example, I can't imagine that small difference is enough to reject the Library version and accept the Develop version.  Maybe you're seeing others with more differences?

Similar Messages

  • After creating a new slideshow I export it with the  setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not  as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?

    After creating a new slideshow I export it with the  setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not  as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?

    DVD's are only 640 x 480 (interlaced), so yes, the quality is not nearly as good.  You should probably create your .mov in DV format to best match the DVD format

  • Library loupe and grid icons

    In Library, my icons for loupe and grid modes disappeared. How to get them back?

    Press "T" (for Toolbar). But if the Toolbar is already showing, click the small arrow at the far right-hand side of the Toolbar and click on "View Modes".

  • Have 5s is crooked and button Sam time not working good I buy it in may 2014 .

    have 5s is crooked and button Sam time not working good I buy it in may 2014 still under warranty  .

    If this is a hardware problem, contact Apple Support or visit an Authorized Apple Service Provider to get it serviced.
    iPhone - Contact Support - Apple Support
    To rule out a software issue, set it up as new device, explained here:
    How to erase your iOS device and then set it up as a new device or restore it from backups

  • BPM worklist app views are not visible in IPM task viewer

    Hi,
    we upgraded our system from 11.1.1.3.0 to
    weblogic 10.3.5.0
    SOA 11.1.1.5.0 with BPEL processes
    ECM with IPM and UCM 11.1.1.5.0
    after upgrade i have problem with profiles in IPM task viewer page. Views are created in BPM worklistapp and all users can see tasks assigned to them there. But those views are not visible in IPM task viewer page (i tried it using driver page). Because of missing profiles/views users can't see and process tasks assigned to them. In log files isn't raised any error message.
    Everything was working before upgrade. Can someone help me with this? What can i have wrong there?
    Thanks a lot in advance for any help
    Edited by: 914063 on Jun 20, 2012 12:56 PM
    Edited by: 914063 on Jun 20, 2012 12:57 PM

    Hi Renuka,
    There are basically two ways to create an ADF UI for a BPM Task:
    1. Generate it from the task
    2. Create a ADF Taskflow based on Human Workflow Task
    Since I tell this by heart, I might be slightly wrong in the terms.
    You probably want to try the second option. It is accessible from the "New Gallery". You'll have to provide the Human Task from the BPM project, but then you can build up the ADF Taskflow by your self, based on the customizations of the rest of your application.
    Should not be rocket science for someone with ADF11g experience. Since it is not my dayly job, I need to figure it out every time again ;). But I did it in the past and it wasn't so hard.
    Regards,
    Martien

  • Entry View is not matching with General Ledger View in a document

    Dear Experts
    My problem is entry view is not matching with general ledger view because of  profit center. I have  posted the general ledger account with posting key 40 and profit center 1200 but when we see the same through general ledger view getting different profit center (i.e. 1410).
    Offsetting general ledger account is compulsory ? if it is working for one general ledger account it should support other general ledger accounts also, but it is not the same in our scenario. Any customization level problem ?
    Earliest help is needed.
    Thanks - VG.

    Hello VG,
    In the general ledger view, the line items for the selected ledger are taken from a data merge between the document line items in the entry view and the document line items in the general ledger view. In the case of fields that exist in both views, the data in the general ledger view takes priority. However, fields are only transferred from the general ledger view to the fields in the entry view if they are active in the relevant ledger. If fields exist in the general ledger table group but are not active in the relevant ledger, they are transferred from the entry view. In the data merge, amounts in the entry view are in some cases (such as cash discounts) distributed proportionately across the amounts in the general ledger view. This is necessary if, as a result of document splitting, a line item in the entry view has been split into multiple line items in the general ledger view. The proportionately distributed amounts in the entry view cannot then be used for reconciliation with account balances because the total of the cash discount amounts from the line items, for example, does not correspond to the balance of the cash discount account as a result of the rounding differences.
    Pls check this,
    Rgds
    Manish

  • 4EA2 the Detail display for views does not show comments for the view

    I am running in an Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production environment.
    The Detail tab for a View does not show comments added for the view. I would like to request that the Detail tab be modified to display any comments added for the view.
    This is important for me because I want to use the Generate DB doc function (from the right-click menu linked to schemas), to generate documentation, and that function uses the same format as the Detail Tab. The View Comments are important for my users.  

    Hi Penny Halsall,
    Kindly check if that Facebook page can be followed by the public. If the profile can't be followed by the public, then the widget won't work as accepted.
    Facebook provides instructions to check/do this here: https://www.facebook.com/help/201148673283205
    OR
    You can generate the associated HTML code from this page :
    https://developers.facebook.com/docs/plugins/
    Regards
    Sonam

  • Reminder and Calendar app info not showing up in Today View

    Both the reminders app and calendar app are showing up as empty, that is, they are not showing any information, in the Today View of the notification center, yet I have multiple reminder lists and calendars on my computer.  What's going on?  How do I select which lists/calendars show up in this section?
    Thanks in advance for whatever help you can offer.

    Ok. So to make things clearer....
    I was able to undelete the yahoo [CICAL] service book so now both my emails are back into play.
    After reading some more posts, this is the problem I'm having (sorry if I'm repeating stuff from my previous comment, I just wasn't sure if I made sense).
    Issues:
    * In the Today theme, my calendar entries are not showing up on the home screen
    * It looks like all my calendar entries went to the "Device Default" calendar setting
    * If I enter a new calendar entry, it says it's using my yahoo email address (which is what it was doing before) and now that entry will show up
    * However, ALL my calendar entries are under the "Device Default" so it would take forever to re input all my calendar entries so that it's posting under my Yahoo account
    Any suggestions on what I should do? Is the only option to just wipe my entire calendar and reinput everything?
    Thanks!

  • I'm in another state and why do I not have good service?

    I am from TN and now in Oklahoma City, OK.....I don't have good phone service here....having dropped calls
    How do I correct this problem.

    You probably can't do anything about it. It's the carrier.  What do you have?  Do they have coverage there?  Are you visiting? Did you move? If you moved and you don't have good service you have a reasonable cause to get out of your contract because your service isn't good.

  • Custom Viewer does not show all folio / Custom Viewer zeigt nicht alle folios

    Hallo, ich bin neu hier im forum und habe gerade meinen ersten viewer zu apple gesendet.
    Mein problem ist, das in dem viewer nur eine kostenlose ausgabe unseres magazins , und das auto-renewable angezeigt werden. Wir haben allerdings noch drei weitere Ausgaben die non-consumable sind. Und diese werden nicht angezeigt. Die product-id´s sind bei apple und im Adobe Folio Builder gleich.
    Würde mich freuen wenn mir da jemand helfen könnte.
    mfg Uhtred
    Hello, I'm new to this forum and have just sent my first viewer to apple.
    My problem is that output in the viewer just one of our magazine free, and the auto-renewable appear. We have, three more issues, the non-consumable. And these are not displayed. The product-id's are the same for Apple and Adobe in theFolio Builder.
    Would be glad if someone could help me there.
    Uhtred

    Sign in to the Folio Builder panel the new Adobe ID (the one you specify as Title ID in DPS App Builder), and create a new folio. To get the articles from the old folio into the new one, you have two choices.
    (1) Use the Import command to import the articles. This works well if you set up your structure properly, including creating a sidecar.xml file.
    (2) Share the folio from the old Adobe ID to the new one. Use the Copy To command to copy over the articles.
    Then specify the folio metadata and cover images, and publish the folios.

  • Design View Renders YUI CSS Incorrectly

    I am evaluating Dreamweaver CS3 and find that opening a web
    page using YUI reset-fonts-grids CSS does not render correctly
    within design view. I'm rather surprised by this since improved CSS
    support is supposed to be a major feature of this version.
    Am I missing something? Or does rendering CSS styled pages
    remain a problem with Dreamweaver?

    SumBodyElze wrote:
    >> And interestingly enough, neither do the browsers.
    So you will always need to
    > test your
    > > pages in the browsers that matter to your end
    users.
    >
    > True. But the whole point of using YUI's CSS is to
    minimize the discrepancies
    > from browser to browser.
    Remember that that CSS is optimized for display in browsers,
    not within development tools. Dreamweaver won't respond to the
    hacks (see below) the same way a browser will.
    > Anyway, here's the actual page:
    >
    http://www.eugenebarnes.com/dw_cs3_test/index.php
    >
    > And here's a screen capture of the same page from
    Dreamweaver CS3:
    >
    http://www.eugenebarnes.com/dw_cs3_test/DW_CS3_screen.gif
    >
    > As you can see, Dreamweaver fails to stretch the inner
    DIVs to their full
    > width in display view. It doesn't even come close.
    There no way I'm going to go through all the compressed
    mashed up code for the CSS that you have attached to your document
    to see if there are any issues with some specific CSS in there.
    A casual glance at the CSS code *seems* to indicate that the
    code does include some CSS hacks to accomplish what it does for
    browsers. Because DW isn't a browser, it won't have the same CSS
    parsing issues as a browser has (not to say that it won't have any
    issues). It will react differently than browsers will to the hack
    code, and potentially to "regular" code as well. Once you throw a
    hack into the mix, you're really not working in a realm that
    Dreamweaver will be able to accurately represent the hacks.
    You might be able to work around some of the issues by
    creating a new CSS file and attach it as a design time style sheet
    ( Text -> CSS Styles -> Design time) , and set the width of
    the wrapper for the columns to something that displays what you
    want it to, perhaps it's 100% or perhaps its a fixed width. That
    may allow Dreamweaver to display the content similar to the way
    that your browser does.
    HTH
    Danilo Celic
    | Extending Knowledge Daily :
    http://CommunityMX.com/
    | Adobe Community Expert

  • Outlook view settings not saved

    I have one user who looses all View settings when restarting Outlook. Occasionally they will save, but it is very rare. Setting the Reading Pane to Off is one good example of a setting that does not save.
    The creation of new Views is also not saved. After restarting Outlook, the new View does not appear in Manage All Views.
    I have tried creating a new Outlook profile and I'm told that Office 2013 C2R has been re-installed since this problem started. 
    Outlook 2013 Click-To-Run via an Office 365 E3 subscription. Exchange Online mailbox. Windows 7 Pro 32-bit. 
    Any help would be appreciated. 

    Hi,
    Basically, Outlook view settings are stored in the default data file. If the data file is corrupt or recreated every time Outlook restarts, the view settings may be not saved.
    Does the user use Outlook with Cached Exchange mode enabled? If so, please go to
    C:\Users\%username%\Documents\Outlook Files and check if you have multiple .ost files in the folder.
    In addition, you may try to switch to turn off Cached Exchange mode and then test this issue again.
    Please let me know the result.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • ICloud Status view option not showing

    I have iTunes Match working on my iMac but when I select under View Options>iCloud Status nothing happens to the columns. I thought a column would appear showing me the iCloud status of my songs. The View Options>iCloud Download column does appear in my Playlist view, but not in my Library Music view. Any way to fix this, or I am doing something wrong?

    I found the answer. I was viewing my Music Library in List view. When I changed it to View>Album List the columns appeared. This may be a bug.

  • Lightroom 5 is distorting my images in Develop view

    When working on images in Develop, Lightroom 5 is distorting them. For example, let's say I'm looking at an image in Library view (fig.1), then switch to Develop view (fig.2) — the image is suddenly compressed horizontally (or stretched vertically, however you choose to describe it).
    At other times, images get distorted and rotated (fig.3). And at other times, images were appearing as though a sharpen filter had been applied with accented highlights — but this particular distortion doesn't seem to be happening anymore.
    This does not happen to all images in the catalog. I'm running LR 5.2 on a 15" MBP with 16GB ram and a 1.2TB fusion drive.
    Any help is greatly appreciated. I'm late on a deadline beause of this, and other local (NYC) experts, as well as Adobe phone support, are as stumpted as I am.
    fig.1    
    fig.2    
    fig.3    

    Did you find an answer?  I'm having the same issue with LR 4.4.  It didn't happen with 4.3
    The only thing I've found to fix it is re-reading the MetaData file for each affected photo and it is taking forever.

  • Why dont run developer-viewer.ipa?

    hi friend
    ı created a folio and then I went to dps panel  for other  To prepare app. I did all the steps in the DPS panel.I downloaded the file, then the developer-viewer.ipa.After downloading the file ı wanted to run in ipad.I could see only the home page but when I run in iPad.
    did not have any page other than the home page within the application.
    There were only home page.When I run the application ipad'te reason why you can not see all of the project.
    Also I have done the project in a zip up and down the 65 MB. but developer-viewer.ipa file 6 MB.
    "Developer-viewer.ipa why when I run the file content is empty" Anybody can help me about the problem?
    Thank you in advance for your help

    hi thanks for answer,
    I used the Multi-Issue App. ı have published folio  ID is the same as used in dsp builder ID.I have checked title id and I can not find the problem about title ID.
    ı can get developer-viewer.ipa but I can see only the home page but when I run in iPad.What can be a problem other than title ID?

Maybe you are looking for