Loupe and handtool in fullscreen are lagging in 1.5

Hi!
Since my update to Aperture 1.5 I've noticed that the loupe tool and panning in fullscreen is awfully slow on some images. When watching the master image it's fast but when I have adjustments applied it slows down. Especially when Shadow/Highlight is on. I didn't notice this behaviour in 1.1.2.
Also it takes ~2 seconds for the loupe tool to come up after I've pressed the shortcut. Overall the loupe feals slower than before.
I'm using a Power Mac dualcore 2.0 ghz, 2.5 gb memory, 7800 GT, dual cinema 20" and the images in question are 8 MP.
Is there anything I could do? I've already disabled previews (didn't help).
I also think the sliders lagg and the result is not instant anymore.
kind regards,
Edvard Wendelin

I've noticed this too. Ironic, as there have been quite a few reports of the loupe (and other features) working better under 1.5. I've found, on the whole, things are lagging much more with the new version, and in some cases the tools are unworkable compared to what they were in the previous version. I know it must be true, because I now find myself avoiding the loupe and full screen in the new version - where they were used continously in the old. All this on a brand new MacBook Pro too. Oh well. Roll on version 2 ...
P.

Similar Messages

  • Firefox 12 is very slow to load pages and if two tabs are opening it lags.

    Firefox 12 is very slow to load pages and if two tabs are opening it lags. I've tried everything (e.g virus, defrag, I've created a new profile in "run", etc). I've had my router/line etc all checked and after 2 weeks of cleaning/testing etc its all pointing to Firefox as the problem. Please help as it's driving me nuts.

    I have the exact same problem.
    Not only does it load pages very slowly, sometimes the page will stop for a good 45 seconds and stop loading, only to finish it much later.
    Something is wrong with Firefox 12, it shouldn't be this slow.
    How is that each version is progressively worse than the one before it?.
    Stop releasing so many versions Mozilla, release one that works and build from there.

  • I have an Apple TV . My husband has an I-pad 2  and I Have an I-Pad 3. When my I-Pad 3 is used we have no problems. However when we try to use my husbands I-Pad 2 video mirrioing lags behind  for minutes. We checked settings and both I-pads are the same.

    I have an Apple TV . My husband has an I-pad 2  and I Have an I-Pad 3. When my I-Pad 3 is used we have no problems. However when we try to use my husbands I-Pad 2 video mirrioing lags behind  for minutes. We checked settings and both I-pads are the same. What can one do to use the I-Pad 2 without any mirroring lag. Thank you All in advance.

    try restarting
    both ipad http://support.apple.com/kb/ht1430
    and atv
    restarting ios devices cure 80% of all troubles users have

  • Adobe Premiere Pro and After Effects CS5.5 Lagging Horribly with Dynamic Link

    I just bought a brand new computer. It is a beast
    Windows 7 64-bit
    Intel i7-980 6 cores with HT = 12 CPU cores
    Nvidia GTX 570HD 1280mb 328 bit
    120gb SSD sata 3
    600 gb Velociraptor drive 10000rpm
    8gb DDR3 1866MHZ ram
    So you would think I would get no lag. But for some reason, when I edit in premier pro or after effects, especially when I use dynamic link with premiere and after effects. It lags realllllly badly. I am talking about 5fps and I have to pause and wait like 20 secs then hit play again to get 5 secs of smoothness and then the laggyness returns. I am not even using heavy footage. It is footage off of a Canon 5D Mark II h.264. I tried messing around with all the settings but I cannot get anywhere. Anyone know what the problem might be? I don't have any other programs running since I just installed these. This lag is really holding me back and I cannot edit properly because of it.

    Your memory is ill configured, since you are using it in dual channel mode instead of triple channel mode and 8 MB is about bare minimum. You would be better off if you were to increase memory to 24 GB. Secondly, your disk configuration is the absolute minimum requirement, so adding a couple of disks will help performance as well.
    I am not even using heavy footage. It is footage off of a Canon 5D Mark II h.264
    Mistake. It is one of the most demanding codecs on the market. Look here: Adobe Forums: System requirements for CS5
    You could try the PPBM5 Benchmark to see how well your setup performs.

  • TS2755 I did the iOS update and now have a terrible lag in texting.

    I did the iOS software update on my iphone4 and now have a terrible lag in the ability to message.

    If you JUST updated, you may need to leave the phone connected and give it time as it is still syncing even though you are able to use your phone. That is part of the new OS, the ability to use your phone while it is processing in the background. If that's not the issue, try what the previous reply suggested. That's what worked for me when my music appeared to be in my iPod, but would not play.

  • Loupe and Grid view rendering not as good as Develop view.

    I recently see that while using LR 5.6 the images rendered in the loupe and grid views do not look nearly as good as the same image displayed in the develop view.  I have screen grabs if you'd like to see them below.  The Loupe and grid are not as saturated and the gradient in the sky is not nearly as smooth.  If I bounce between 'E' and 'D' it is pretty obvious.  Once in a while the 'E' (loupe) view looks the same.  I'm afraid that I will delete an image based on what I see in the Loupe or do unnecessary edits on an image.  When I exported to jpg, the images looked pretty good.
    Grid:
    Loupe:
    Develop:

    As far as what could be contributing to a difference, other than an actual bug:
    LR Previews are stored as AdobeRGB JPGs, so Library previews go from LR-Internal color profile to AdobeRGB to Display color profile, whereas Develop previews go directly from LR-Internal color profile to Display color profile.  If there are some colors that are outside of AdobeRGB then some conversion may occur.  The conversion to 8-bit JPG is also probably adding banding that Develop wouldn’t show.  There might also be Relative vs Perceptual color profile conversion differences occurring.  I don’t know the specifics of which is used for the Adobe color profile conversion and whether what you’re seeing is outside the expected variations.
    If you view at less than 1:1/100% zoom, especially with Fit or Fill, then small details that vary across the group of original image pixels that are displayed as one display pixel can be averaged differently due to differences in the downsampling algorithms used between computing Library file previews and computing Develop display previews where Develop’s is built for speed because it occurs in real-time after every slider movement, where Library previews are computed in the background and so can use a more accurate resampling algorithm.  Usually this is only a difference in sharp/smoothness but it can also manifest as a difference in tone if there are lots of tiny noise spots getting averaged together inaccurately in Develop or more accurately in Library.
    Since I can see only a tiny difference between Library and Develop on my monitor in this particular example, I can't imagine that small difference is enough to reject the Library version and accept the Develop version.  Maybe you're seeing others with more differences?

  • Videos are lagging

    Videos on YouTube and Instagram are lagging or won't play.

    how are videos on youtube or vimeo?
    if those work fine it mght be putlocker and the way they handle streaming
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • TS3988 My wife bought an iPad Air and synced contact from our PC (Outlook), now all our contacts in Outlook have gone and we have to go to iCloud to get them, and even then they are a bit jumbled. How do I get my data back onto my PC?

    My wife bought an iPad Air and synced contact from our PC (Outlook), now all our contacts in Outlook have gone and we have to go to iCloud to get them, and even then they are a bit jumbled. How do I get my data back onto my PC?

    If you can see the iCloud contacts in Outlook, you can copy them back to your PC by selecting all the contacts (click one, then press Control-A), then drag and drop the selected contacts to Contacts under My Contacts on the left sidebar of Outlook.
    If you want to copy your calendar back to Outlook, select your iCloud calendar on the left sidebar of Outlook, switch to the list view (select View from the ribbon, then click Change View>List), select your events (click on a single event, then press Control-A), then control drag and drop them to Calendar under My Calendars on the left sidebar.
    Then you can sign out of iCloud on the iCloud control panel and your local copies will still be there.  If you want to add your iCloud email account back to iCloud, you can do this with these settings: http://support.apple.com/kb/HT4864.

  • Pages 5.5.1: When opening a document created with Pages '09 (Version 4.0) with Pages 5.5.1 the page header and the page footer are deleted. How can this be prevented? Or is this a bug in Pages 5.5.1?

    Pages 5.5.1: When opening a document created with Pages '09 (Version 4.0) with Pages 5.5.1 the page header and the page footer are deleted. How can this be prevented? Or is this a bug in Pages 5.5.1?

    Same problem here (no graphics in header or footer) and the problem has been reported months ago. It is another bug/feature lost when Apple moves from 09 to the iCloud-compatible versions.  Complain to Apple, you may have better chance than me and they may finally listen to their users....

  • My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management

    I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
    My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
    Could there may be a setting somewhere that I need to adjust please?  I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
    <Edited by Host>

    Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.

  • HT4796 Migration assistant is telling me that it has lost connection with my Mac and to ensure they are on the same network.  They are, and an ethernet cable is plugged into them.  What do i do?

    Migration Assistant has been running since yesterday evening.  My Dell is now telling me that its trying to reconnect to my Mac and to ensure they are both using the same network.  I have an Ethernet cable plugged in them and they are both on the same WiFi.  What can I do?

    Hello Wyodor,
    thanks for your reply on my question.
    You are wright the index file is 308 KB.
    And offcourse that I delete my files and documents is not an Iweb problem, but because my English is not that good, that I thougt I try to tell the whole story, and hope people can read trough the lines.
    Why I didn't use Iweb to upload to the server is because the server company recommanded to use file zilla. And I am a nobody with this kind of things, so I did exactly what they tell me to do.
    No, i did not make a backup of Iweb and the domain file, but reading other messages on this forum showed me that I can maybe try to make empty the cashfile (?)
    and otherwise I have bad luck and have to make my website again. Offcourse I have a lot of examples from all the pages (copied from the local map to my USB stick) and my website is aprox. 15 Mb, (not so big) so it will cost me a few nigths.
    But I'm still hoping on a miracle :-)
    greetings Lasource

  • JDeveloper 3.1 and JDK1.2.2: are they REALLY compliant?

    Hi,
    I've already been developing in JDev 3.0 using Java 1.1.8 for a few months and have a number of EJB's deployed in an Oracle8i 8.1.5 database. These are accessed by a servlet which is called from a C++ application in order to populate the db tables. I'm using Java Webserver 2.0 and everything works fine.
    I've been upgrading to Java 2 with JDev 3.1, Oracle 8i R2, and JDK1.2.2. Everything again works fine when I am testing and debugging in the JDev 3.1 IDE but when I deploy to the Web server, my context lookup for the EJB published name freezes, returns an error status to the C++ app but does not display any error/exception msgs in the server console/log files.
    On investigating I found that the java.exe bundled with JDev 3.1 as the JDK1.2.2 version is actually NOT the java.exe that has been dispatched with the release version of JDK1.2.2! There are however two files in the bin directory of the JDK1.2.2 called oldjava.exe and oldjavaw.exe which correspond to the ones bundled with JDev 3.1?
    Could someone please explain what is going on? As it stands at the moment the version of java.exe with JDK1.2.2 does not work for my EJB's but if I replace it with the oldjava.exe, it works fine. Does this mean that JDev 3.1 is NOT actually JDK1.2.2 compliant or have I done something wrong?
    This is potentially a major problem for our projects so if anyone at Oracle has any info it would be greatly appreciated.
    Cheers
    Dave

    David,
    I changed Sun Java 1.2.2 VM to JDeveloper 3.0 1.1.8 VM and now I get this:
    [Root exception is java.lang.ClassNotFoundException: EJBBibles.BibleSearchHomeHelper]javax.naming.Na
    mingException: Unknown reasons
    at oracle.aurora.jndi.sess_iiop.SessionCtx._activate(SessionCtx.java:82)
    at oracle.aurora.jndi.sess_iiop.SessionCtx.activate(SessionCtx.java:276)
    at oracle.aurora.jndi.sess_iiop.ServiceCtx.lookup(ServiceCtx.java:320)
    at oracle.aurora.jndi.sess_iiop.sess_iiopURLContext.lookup(sess_iiopURLContext.java:215)
    at oracle.aurora.jndi.sess_iiop.sess_iiopURLContext.lookup(sess_iiopURLContext.java:201)
    at javax.naming.InitialContext.lookup(InitialContext.java:288)
    at EJBBiblesServlet.Servlet1.init(Servlet1.java:36)
    at org.apache.tomcat.core.ServletWrapper.initServlet(ServletWrapper.java:315)
    at org.apache.tomcat.core.ServletWrapper.handleRequest(ServletWrapper.java:445)
    at org.apache.tomcat.core.ServletWrapper.handleRequest(ServletWrapper.java:597)
    at org.apache.tomcat.servlets.InvokerServlet.service(InvokerServlet.java:257)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at org.apache.tomcat.core.ServletWrapper.handleRequest(ServletWrapper.java:503)
    at org.apache.tomcat.core.ContextManager.service(ContextManager.java:559)
    at org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(HttpConnectionHand
    ler.java:160)
    at org.apache.tomcat.service.TcpConnectionThread.run(SimpleTcpEndpoint.java:338)
    at java.lang.Thread.run(Thread.java:466)
    If I use JDev 1.2 VM, I get this:
    javax.naming.NotContextException: fumaca:2481:eatg/test/BibleSearchRemote
    java.lang.Object oracle.aurora.jndi.sess_iiop.sess_iiopURLContext.lookup(javax.naming.Name)
    java.lang.Object oracle.aurora.jndi.sess_iiop.sess_iiopURLContext.lookup(java.lang.String)
    java.lang.Object javax.naming.InitialContext.lookup(java.lang.String)
    void EJBBiblesServlet.Servlet1.init(javax.servlet.ServletConfig)
    void org.apache.tomcat.core.ServletWrapper.initServlet()
    void org.apache.tomcat.core.ServletWrapper.handleRequest(org.apache.tomcat.core.Request, org
    .apache.tomcat.core.Response)
    void org.apache.tomcat.core.ServletWrapper.handleRequest(org.apache.tomcat.core.HttpServletR
    equestFacade, org.apache.tomcat.core.HttpServletResponseFacade)
    void org.apache.tomcat.servlets.InvokerServlet.service(javax.servlet.http.HttpServletRequest
    , javax.servlet.http.HttpServletResponse)
    void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.Serv
    letResponse)
    void org.apache.tomcat.core.ServletWrapper.handleRequest(org.apache.tomcat.core.Request, org
    .apache.tomcat.core.Response)
    void org.apache.tomcat.core.ContextManager.service(org.apache.tomcat.core.Request, org.apach
    e.tomcat.core.Response)
    void org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(org.apache.tomca
    t.service.TcpConnection, java.lang.Object[])
    void org.apache.tomcat.service.TcpConnectionThread.run()
    void java.lang.Thread.run()
    Which means that there is a difference relative to the VM version.
    All the names are correct on 8i deployment. And all necessary files are on classpath, (including the EJB source and generated jars, that are also in the /lib on the context dochome).
    Any thoughts?
    Thanks,
    Eduardo
    null

  • ITunes Library is lacking space. And my iPod Apps are failing on me, please help!

    My problem is with my Apple iPod Touch White 8GB iOS 5 (purchased December 2011)
    I am wanting to erase all data on this iPod because its freezing alot and lots of Apps are opening for 2 seconds before returning to the home screen. So before I would delete all data I would now try and Transfer Purchases but it then said that there is not enough room in the iTunes Library. I deleted some albums and films and there was plenty of room, so when I clicked again, it also said there is not enough space (and that was for 6.4GB of content) so I did not know what to do. Is there any way of doing it different? And can I also have help with why my Apps are freezing or not working.
    Thanks,
      Nisar Khan

    From the error message it might be the the hard disk on the computer does not have enough free space.  Try freeing up disk space by first emptying the recycle bin.

  • HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR,  as I open files in a folder and lets say they are labeled in yellow  they are all going back to  the camera raw default , in other words no ma

    HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR,  as I open files in a folder and lets say they are labeled in yellow  they are all going back to  the camera raw default , in other words no matter what work I have done, inc cropping they  all go back to ,as they came out of camera. What on earth is happening? I am on PS CS6. I might point out everything was working normally up to  yesterday, when this first started.
    I recently changed computer to 64bit from 32bit, not sure if this causing  the problem or not. Any help would be appreciated.

    Robert,
    Would you be so kind to rephrase your question with concise, precise information and without any "let's say that" hypotheticals?  Sorry, I can't quite follow you.
    Also please give exact versions of Photoshop CS6 (13.what.what), of Bridge and of your OS.
    Thanks.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Hyperlinks to XLS, DOC, and PDF files that are included in a .chm file work intermittently.

    SUMMARY
    Hyperlinks to XLS, DOC, and PDF files that are included in a
    .chm file (and the Baggage Files) only work intermittently. The
    only solution appears to be deleting the Temporary Internet Files.
    PROBLEM
    1. I place the XLS, DOC, or PDF file in the Windows
    sub-directory that corresponds to the RoboHelp project sub-folder
    where the topic in which I’ll place the hyperlink exists.
    2. I open the help project in RoboHelp HTML.
    3. I right-click on the project’s Baggage Files
    sub-folder that corresponds to the Windows sub-directory in which I
    placed the XLS, DOC, or PDF file (in step 1).
    4. I import the XLS, DOC, or PDF file.
    5. I open the topic in which I’m going to place the
    hyperlink in the WYSIWYG editor.
    6. I “drag and drop” the Baggage File into the
    topic (in the WYSIWYG editor) to create a link to it.
    7. I save the changes and then generate HTML (.chm) help.
    8. I open the .chm file and click the hyperlink. The XLS,
    DOC, or PDF file may or may not open.
    9. When the hyperlink works correctly, for DOC and XLS files,
    a “File Download – Security Warning” dialog box
    appears asking, “Do you want to open or save this
    file?”. The buttons that are available are
    “Open”, “Save”, and “Cancel”.
    These buttons work then as one would expect. (When the hyperlink
    works correctly for a PDF file, it simply opens the PDF file in a
    new window; there’s no prompt to save, open, or cancel.)
    10. When a hyperlink does NOT work, for DOC, XLS, and PDF
    files, no dialog box or other visual message is displayed. Instead,
    the sound that is associated with the “Exclamation”
    program event is played (the “Windows XP
    Exclamation.wav” file is the WinXP default).
    Other Notes:
    - The hyperlinks ALWAYS work when I view a topic using the
    “View Selected Item” function (Ctrl+W) in the RoboHelp
    HTML project.
    - Once a hyperlink stops working, it will not start working
    again until I delete all the Temporary Internet Files.
    - A hyperlink will stop working even if Internet Explorer
    (iexplore.exe) is closed the entire time.
    WORKAROUND
    Through trial and error, I have discovered that if a
    hyperlink stops working, I can get it to work again using the
    following steps:
    1. Leave the .chm file open.
    2. Open Internet Explorer.
    3. Click Tools>Internet Options….
    4. From the “Internet Options” dialog box, select
    the “General” tab.
    5. Under the “Temporary Internet Files” section,
    click the “Delete Files…” button.
    6. From the “Delete Files” dialog box, select
    “Delete all offline content” and then click
    “OK”. The files are deleted and the “Delete
    Files” dialog box closes.
    7. Click “OK” to close the “Internet
    Options” dialog box.
    8. Without closing Internet Explorer and without re-starting
    the .chm file, all the hyperlinks that didn’t work before
    will now work.
    GENERAL SYSTEM INFORMATION
    - Windows XP Pro, SP2
    - Internet Explorer 6.0.2900.2180
    - RoboHelp X5, 5.0.2 Build 801
    - HTML (.chm) help project files exist on my local machine
    - HTML (.chm) help file is run from my local machine
    - Project is under RoboSource version control
    TEMPORARY INTERNET SETTINGS
    - “Check for newer versions of stored pages” is
    set to “Automatically”
    - “Current location” for the Temporary Internet
    files folder is set to “C:\Documents and Settings\My
    Username\Local Settings\Temporary Internet Files\”
    - “Amount of disk space to use” is set to
    “594” MB
    “View Files…”
    - An XLS or DOC file will be listed here if I click its
    hyperlink and then click either “Open” or
    “Save” from the “File Download – Security
    Warning” dialog box.
    - A file will appear here even if I click “Save”
    and then click “Cancel” from the subsequent “Save
    As” dialog box.
    - If I click “Cancel” from the “File
    Download – Security Warning” dialog box, the file does
    not appear in the Temporary Internet Files folder.
    - When a file does appear in the Temporary Internet Files
    folder, its Internet Address is displayed similar to the following:
    “ms-its:C:\PrimaryProjectFolder\ProjectName.chm::/SubFolderName/FileName.xls”
    “View Objects…”
    Here’s a list of all the program files that appear:
    - “Microsoft Office Template and Media Control”
    (Last Accessed 12/13/06) (Version 12,0,6024,0)
    - “Shockwave ActiveX Control” (Last Accessed
    12/14/06) (Version 10,1,4,20)
    - “Shockwave Flash Object” (Last Accessed
    12/18/06) (Version 9,0,28,0)
    - “Windows Genuine Advantage Validation Tool”
    (Last Accessed 12/14/06) (Version 1,5,722,0)
    - “WUWebControl Class” (Last Accessed 12/13/06)
    (Version 5,8,0,2469)
    Today is 12/18/06 so the only program file that is listed as
    having been “Last Accessed” today is the
    “Shockwave Flash Object”.
    REQUEST FOR HELP
    I really want to include certain PDF, DOC, and XLS files in
    their native format in a .chm file. However, I need a better
    solution to my problem than the one I discovered. What I really
    want is to avoid the entire problem altogether.
    Have anyone seen this before or have any suggestions?

    You wont be able to do that. The embedded objects would appear as images only.

Maybe you are looking for

  • Long render times in Premiere CS6

    Hello everyone. I am exporting my first ever Premiere show. It is a 82 min. long program, HDV 1080i. Everything is rendered - the entire timeline is green. It took well over 2 hours to render, which seems excessive to me, though I did have filters on

  • Does not appear in my itunes podcast

    A few days ago I asked Apple that eliminated my iTunes podcast to change the RSS feed on the other, but now that I have removed will not let me upload a new feed and tells me has already been sent. How I can fix this?

  • How can I pass an object to an inner method?

    Hi all, I'm stuck with a tiny problem here, hope someone can help out: I receive an UndoableEditEvent object in my method and I then want to apply that object to a JTextArea, my understanding is that I need to add a listener to the JTextArea.. but it

  • I have Maverick 10.9.3. In Mail I have several POP and SMTP

    The Mail Connection Doctor tells me that the POP connections do not succeed, some SMTP do. I may have inadvertantly cleaned off part of the settings. What to do?

  • Oracle 9i Trigger not updating first time through

    Hi, I have read a lot of postings but this one seems to be unique. I am trying to update using from Access to Oracle backend database with a Trigger. When I put the code from the update in a test window in the PL/SQL, I step through the code and it d