LOV auto-completion is not working (1)

When the user types in a partial value in the messageLovInput and tabs out, the value gets auto-completed if there is a unique match. If there is not unique match, then the LOV modal window opens up.
In some cases, you may see that typing in a partial value and tabbing out does not do anything, except for moving the focus on the base page. This can be because of the following reasons.
1. You may have explicitly turned off auto-completion, by specifying the value of property "Disable Validation" to true.
2. You may be using a browser that does not support PPR. Auto-completion relies on the PPR functionality, and it does not work in environments where PPR is not supported. For example, Netscape 4.75 does not support PPR. IE 6 and Mozilla 1.7 support PPR.

Try a reset and see if it fixes the problem. You will not lose any data.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Similar Messages

Auto complete does not work when entering a URL

firefox 3.10.6 on Fedora Linux fc13 x86_64. Show all history shows the history of visited web sites. "Remember History" is on. The auto complete was working. I did try unchecking view the bookmark toolbar, but not sure if that caused the loss of auto complete.

I tried that and it doesn't work. I have Mac OX v 10.6.4 . Anyone have a clue? It's very frustrating. thanks.

I have an iMac and the latest Firefox; however, I *can't* get auto-fill to work...I do a lot of repetitive data entry and auto-fill/auto-complete IS NOT WORKING

I downloaded the auto-fill app for firefox (latest version) and have the latest firefox version, yet none of the autofill works whenever i do it once.
i've even restarted firefox, shut down my iMac for a while, started firefox up again, nothing.
i do A LOT of repetitive data entry and this is getting frustrating for me to work from home.
help, please! *thanks in advance!*

We apologize that you are experiencing issues with some Firefox feature.
When typing in a text field, does is drop-down list appear when typing?
If not, please '''try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Auto-Deployment is not working in Eclipse - Weblogic

I have created weblogic server instance in Eclipse.Then, I have added one project into weblogic server by using "Add/Remove Projects" menu.After I start the server , I logged into admin console and checked the deployments link. I am not finding the project listed in the list.I have selected option "Run stand alone web module directly from work space" in web logic server configuration window in eclipse.
I am using Eclipse 3.3 and weblogic 10.0.
I have no idea, why auto-deployment is not working.
I would appreciate your help on this regard.I have contacted Eclipse Support, they have asked me to contact BEA team.
Thanks,
Prakash.A

Hi Prakash,
The "Run standalone web module from workspace" doesn't publish the application to the server (instead the app is deployed to a temp location).
This is mainly to help test the app during the development stages. If your app is complete and would like to publish to the server then you might want to try the following option
- In Server View, double click on the configuration to launch Overview
- Select "Copy stand-alone web module into separate deployment folder"
- Save the configuration
- Start the server
The application would be deployed to the server as a WAR file.

My Auto-Brightness is not working on my iPhone5

My IPhone5 auto-brightness is not working I don't know if it is a bug or what please help. Thank You

Destinie Harris wrote:
sberman wrote:
Resetting may help. Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.
You only want to do this if your iPhone won't turn on or off and is completely frozen. Instead, try Resetting all settings in Settings > General > Reset > Reset all Settings
I completely disagree. Reset All Settings (your suggestion) would reset the OP's preferences and settings. By contrast, resetting the iPhone (as I suggest) changes no preferences, settings, or any other data. It simply starts the iPhone over, with no data loss.

Auto Completion Doesn't Work in Eclipse 3.1

Hello
I am working with Eclipse 3.1 in Linux Envirnment.
I had update my plugin for FreeMaker and Beanshell.
I had imported my desired classes, still class names are not coming automatically.
I am unable to write program on Eclipse.
reply soon
Thanking you,
Bisweswar Sahu.

This has nothing to do with JSP, also nothing with "auto completion doesn't work".
You need to add the classes to the 'build path' of the project, then you can import them in your code.

Auto sync is not working. How can I manually transfer music from my macbook pro iTunes to iphone 5?

Auto sync is not working. How can I manually transfer music from my macbook pro iTunes to iphone 5? My iMatch is turned on and I can direct downlad my music to the iPhone from the Cloud; however, I want to direct import All of my music from iTunes to my iPhone 5 via the connecting USB cable and it is not working. Yes, I have tried restarting both devices, and no autosync is not working nor is is it providing the avaialbile option to select music in iTunes on my Mac to then sync. Please help. Thanks

Please disregard. I figured it out. Answer for anyone else running into this problem: You have to turn off iTunes Match on both devices. Apparently, if you activate iTunes Match it deactivates your abiltiy to direct sync.

After acceessing home screen with assistive touch auto lock is not working in my iphone 4S after upgrading to ios6

After acceessing home screen with assistive touch auto lock is not working in my iphone 4S after upgrading to ios6

Additional testing i perform to make wifi work but nothing works out:
i did re-installing the software using iTunes, reset the network settings restarting the phone. Nothing solves my problem.
wifi was working with older software versions. i think there should be a problem with 8.1.1.
is anyone has fix for this issue?

Upgraded to 8.3, now auto fill is not working. I have checked, rechecked my info, saved passwords, etc. to no avail. Is this bug in 8.3. Never did this until I upgraded.

Upgraded IPad to to 8.3, now auto fill is not working. I have checked, rechecked "my info", "saved passwords", etc. to no avail. Is this bug in 8.3. Never did this until I upgraded. Wife is not happy I upgraded!

Auto fill works for me in iOS 8.3.
Try the standard troubleshooting steps in this order:
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.
Restore: Connect your device to iTunes on your computer, backup, and then select Restore to Factory.
See here for more details on restore: https://support.apple.com/en-us/HT201252
If none of these work your device may have developed a hardware problem. Contact Apple Support: http://www.apple.com/contact/

Code completion particular not working

Hello,
in my program there are serveral internal classes. Each class has its own include file. Code completion seems not working for internal classes in other include files.
example:
lcl_class1 in includec01   (first included)
     class-methods static1_1
     methods method1_1
lcl_class2 in includec02   (second included)
     class-methods static1_1
     methods method1_1
problem:
While development in lcl_class2 there are no code completion for lcl_class1.
No code completation for lcl_class1=>static1_1
but if you declarate "data lo_myclass type ref to lcl_class1." code completion is working fine for public member methods and attributes in the same file.
In Functiongroups all working fine.
Best Regards
Markus Bauernschmitt
Und da hier eh die meisten deutschsprachig sind und mein Englisch grausam ist, nachfolgend die Erklärung nochmal auf deutsch.... ;-)
In meinen Programmen findet die Codevervollständigung keine interne Klassen aus vorangegangenen include Dateien. Dadurch werden weder die Klassen selbst noch die statischen Methoden angezeigt. Gebe ich eine statische Methode ein und möchte die Hilfe anzeigen (F2) erscheint die Fehlermeldung "Codeinformationen sind nicht verfügbar".
Dieses Problem tritt nicht auf, falls die Deklaration einer Variablen in der gleichen Include Datei erfolgt.
Deklaration einer Variablen in der aktuellen Include Datei -> Dokumentation der öffentlichen (nicht statische) Methoden und Attribute funktioniert
Zugriff auf öffentliche (statische oder nicht statische) Methoden und Attribute von globalen Variablen (deklariert in einer anderen Datei) funktioniert dagegen nicht.
Es sind nur anscheinend nur Programme betroffen. Bei Funktionsgruppen (getestet am Beispiel "ldemo_cr_car_rental_screen") trat der Fehler nicht auf.

Hi Dominik,
thank you for your answer. The internal classes are already simple and lightweight. In my understanding of OO I keep classes private as possible and so I create this specific "one program helper classes" in the smallest reasonable scope.
However, this is a architektur decission. But the pivotal question is: Why working this kind of code completion in function groups but not in programs.
Some additional information.
- Code completion working in "START-OF-SELECTION."
- In Functiongroup includes (Testcase lcl_class1 show as public type and lcl_class2 show as local public class.
Best regards
Markus

My auto updates are not working. I cannot find where to download Camera Raw 8.1 for Photoshop CS6.

My auto updates are not working! I cannot find where to download Camera Raw 8.1 for Photoshop CS6 (Windows 8 64 bit). My Camera Raw is now at 7.1. I had the online Adobe folks tell me to just download all updates manually. That's great, yet I cannot find camera raw 8.1 to download...
Please help.
Thanks, Janet

there's a direct download link on this page: https://blogs.adobe.com/lightroomjournal/2013/06/camera-raw-8-1-and-dng-converter-8-1-now- available.html

Auto backlight does not work on 4S with iOS 7! With iOS 6.1.3 I had the same problem.Why?

Auto backlight does not work on 4S with iOS 7. I had the same problem with iOS 6.1.3! Why ?

rlwebb71 wrote:
... I have the latest generation iPod touch, not the 5, but the latest. So why can't Siri come out and play?
Siri is not a feature of that iPod... 4th Gen...
iOS 6 Which Software for Which iDevices...
http://support.apple.com/kb/HT5457

Completion Insight not working

A customer is using the same version of SQL Developer on the same workstation platform as myself. My Completion Insight works, his does not.
SQL Developer version 3.1.07 on Windows 7 Professional.
Completion Insight is enabled under Tools->Preferences->Completion Insight. Regardless of this setting the ctl + <space> shortcut works instantly for me, but under no circumstances for the customer.
I made a test account on the DB that mirrors customer's privileges - my Completion Insight using the test account still works, so the problem must be with local to his install.
I verified his SQL Developer files came from the same zip file I used for my own installation.
Any ideas what is preventing his Completion from working?

You might consider upgrading your customer to the latest release, v3.2.20.09
In the meantime, I've noticed completion insight NOT working when there's a syntax/parsing issue. For example, what's in the worksheet code wise when they try it?
With an empty worksheet, if they type select * from <ctrl><space>, does nothing come back?

"Auto completion" doesn't work in the new ABAP editor

Hi Gurus,
It is quite strange that the "auto completion" doesn't work for me in my new laptop. After I press "ENTER", it starts a new line.
Any body know this?
Thanks a lot.

Hello,
Use "Tab" instead of "ENTER"

My auto-lock does not work properly in this new iOS 6

My auto-lock does not work properly in this new iOS 6

Do you have your Assistive Touch on? Per another user in another forum:
Source: http://forums.imore.com/ios-6-forum/240631-auto-lock-not-working-ios-6-a.html. Username: Chambaka
Okay, I did a 'reset all settings' in settings and problems fixed. Hope this can be useful for others.
Edit: it appears that when the assistive touch is on the autolock function won't work while in the home screen, but will work if opening a app. I hope Apple fixes this bug in the next update.
I tried what he said and my auto-lock's working again - so, I turned off my Assistive Touch. Hope Apple fixes this bug soon,

LOV auto-completion is not working (1)

Similar Messages

Maybe you are looking for