Lov Values are not showing for Discoverer Reports in Application

Hi,
I developed some discoverer reports, those reports having parameters with LOV. Those LOV values are showing in Discoverer Desktop, but after registering those reports in Oracle applications those LOV values are not showing. Pls let me know how resolve this issue.
Regards,
Hanimi.

Hi,
Also it is necessary to know how the LOVs are defined. Are they based on Application flexvalues for example? In which case it may be that you have not got your NLS language parameters set correctly when connecting from Applications.
Rod West

Similar Messages

Values are not matching for inventory report

Hi all,
we are running the report stock over view, in that there is a key figure total stock which is having the non cumulative option
inflow and outflow
data has been loaded correctly but when we are executing the report it is giving the values cumulatively
that means
report containing material, plant and calmonth
we have the data loading from october onwords
suppose total stock is
10.2007= 10ST
11.2007=20ST
12.2007= 50 ST
it is giving the output
10.2007 = 10ST
11.2007 = 30ST
12.2007 = 80ST
it is cumulating the values
TOTAL STOCK is the business content object which is having the options
aggregation = sum
exception aggregation = Last Value.
can any one helps me on this issue.
Thanks & Regards,
Suresh.

HI,
Thanks for your reply,
we are not done any compression on the requests, but now deltas are running
is this is the problem cause for the report
if it is the problem hw we can resove it
can you please reply
Thanks & Regards
Suresh

Report Painter values are not populating for a particular cost center

Report Painter(GR55) values are not populating for a particular cost center for the months of April 1 2011 where as for May onwards values are displaying correctly..We have check the transaction code KSB1 for this cost center there are some values posted for the period of April..
Can any one help me to find out where exactly the issue is and how to resolve the same..

Please check your variables in your report.

Parameter values are not showing in in the Organization Parameter form

We have done a setup for an Inventory Organization.
Everything was working fine.
Values were showing everywhere.
We have lot of transactions done in the org also.
But suddenly yesterday when I was trying to open the Organization Parameter form for that specific organization, the form came up as blank and in the bottom the error is Query caused no records.
I have checked data is there in the base table mtl_parameters.
Value is coming for other organizations. Only one specific organization is having this issue.
Even in Examine, I have taken the last query run on that form and ran the same in back end database, I can see all values are there in the database.
But in frontend screen the values are not showing. even organization code also not showing.
Navigation is: Inv Super user --> Setup --> Organization --> Parameter

Have you checked Organization Access to ensure that no one restricted that org?
Or shipping grants and roles?
I think there are quite a few places that you can restrict access.

Excise values are not showing in billing

hi all,
In RG23D register BED, AED, ECS values are showing correctly, but in order (VA02) or in billing (VF01) excise values are not showing. So, what could be the reason and what need to be checked?
thanks.

mohan prabu,
Its Surprising, how come it is not appearing in Order and billing but yet it is passed to register RG23D.
1. Check Whether you have maintained those condition types in your pricing procedure.
2. Check whether you have maintained VK11 i.e., Values for those Excise Condition Types.
3. Check whether you have activated Statistical indicator for those condition types.
4. Proceed performing Analysis in Item details --> Conditions Tab --> Click Analysis tab provided to check whether the conditio types has been executed or not.
5. Check your Config Settings
IMG --> LG --> Tax on Goods Movement --> India --> Basic Settings --> Determination of Excise Duty --> Maintain Excise Defaults
Check these initially and let us know your outcome...
Regards
Sathya

ST06 Screen values are not showing as ecpected

Hi Experts,
ST06 Screen values are not showing as expected like avg CPU idle time and min Swap space, page out and page in values etc.
All fileds are showing "Zero Values" since last week and i just found tht today.
I Went to
SM 36, All Configured standard jobs are SAP_COLLECTOR_FOR_PERFMONITOR, SAP_COLLECTOR_FOR_NONE_R3_STAT.. etc are running fine.
Restarted the SAPOSCOL service also.Please suggest me.Please find the Enclosed values..
Compare recent days for server cambsvr13    Date/time 27.06.2008 13:40:31
Average values for peak workload
Date      Usr Sys Idl    Pages in/h             Pages out/h               Swap space              Lan packets/h          Lan errors/h
           avg avg avg         max        avg         max        avg    max size   min free         max        avg         max        avg
20080626    0    0    0           0          0           0          0           0          0           0          0           0          0
20080625    0    0    0           0          0           0          0           0          0           0          0           0          0
20080624    0    0    0           0          0           0          0           0          0           0          0           0          0
20080623    0    0    0           0          0           0          0           0          0           0          0           0          0
20080622    0    0    0           0          0           0          0           0          0           0          0           0          0
20080621    0    0    0           0          0           0          0           0          0           0          0           0          0
20080620    0    0    0           0          0           0          0           0          0           0          0           0          0
20080619    0    0    0           0          0           0          0           0          0           0          0           0          0
20080618    0    0    0           0          0           0          0           0          0           0          0           0          0
20080617    0    0   99      17,240      9,685      97,730     97,575   10485,760 9,023,492      22,430     21,205           0          0
20080616    0    0   99       7,260      3,978     101,340     97,418   10485,760 9,057,327      21,940     19,447           0          0
20080615    0    0   99       1,390      1,088     101,330
99,113   10485,760 9,162,058      16,199     15,970           0          0
Best Regards,
Vinod

Try stopping the SAPOSCOL NT service. Then, copy this folder (making a backup):
installdrive\usr\sap\prfclog to installdrive\usr\sap\prfclog_old
Then, clear out everything inside of installdrive\usr\sap\prfclog
Also, doens't hurt at this time to check the credential of the user running your SAPOSCOL, typically it should be the same as the user running your SAP instance.
Start SAPOSCOL and wait for the OS collector job to run. Give it 24 hours, come back and check.

Grand total values are not matching with Detail report

Report has grand totals and when I drill to the detail report, grand total values are NOT matching with parent report totals, I did some analysis but I'm clueless on this issue.
Please provide your thoughts and insight on this issue..
Thanks

is your summary and detail reports hitting different facts, like summary hitting aggregate and detail report hitting it's corresponding detail level fact..?
if then,
From Front-end:
Fix the filter values in detail report that are passing from master report then try delete each columns then check the grand total. If you found your values is matching by deleting particular column then you need to investigate what is the issue around with that dimension table..
From Database side:
1. check first aggregate table has proper aggregate data of it's detail..
2. Take the detail report obiee generated query and try to comment each dimension table and it's corresponding joins to the facts, (before, this delete all the dimensional columns and other measures from select statement and put only that measure where you are getting wrong value, so that you need not to comment all the select and group by columns which saves your time.. ). Need to check by commenting each dimensional wid and it's table from clause, if you found that values is matching then there is some problem with wid columns data population in your ETL.
Is that BI-Apps project?
btw, whtz ur name?

Option claims from CRM are not showing in BW report.

Hi All,
We are having a problem with BW report. The report shows all the claims thatt are created in CRM system( spource sys- CRM). We notices that claims that are called as option claims are not showing in BW report, but they are present in BW. I have checked filters in report design. no filters exist. Where they are getting filtered out. Please help me.
Haaris..

Hi,
I am giving you ore information on the above issue, the above query is running on an infoset, I realized, data is missing from infoset. Where as the data is present in DSO.
The other thing I can see every other claim in BW, but I cannot see Option claim which are very less compared to other claims.
The infoset has four DSOs and one characteristic as components.
Please let me know if you get any idea?
Haaris.

Key frame values are not showing

Does anyone know why my key frame values are not showing? How do I get them back?

See this about showing and hiding columns:
After Effects Help | General user interface items

Master data(0vtype) values are not showing in reports.

Hi Gurus,
I have an info object '0VALTYPE' with 'TEXT'. I already loaded the data in
for this object. but in reporting level i am getting the values # and 20(actual)
even though it has so many vales(ex: 10(plan)etc). but all the values are not populating in the query.how to get all the values in reporting level.
Thanks in advance.
Thanks
Raju.k

Hi Raju,
You have already confirmed, but still please go to infoobject 0VTYPE again and check the master data to see all values exits there.
If yes and still in reporting you can not see those, try doing the following:
1) Right click on 0VTYPE and click on "Activate Master Data", and/or
2) Go to Menu --> select Attribute change run --> select 0VTYE and execute the changes.
Regards
Pankaj

LOV Values Are Not Preserved After Redirect

Hello,
I have a page where I have two LOV's on top of the page and interactive report is generated based on the values from LOV's.
The values are passed to IR report correctly. MY problem is when I change values in LOV 2, LOV 1 values are getting reset.
Both LOV's Display As is set as Select List with RedirectHow can I make sure that LOV values are preserved even if I change values in either any one of the LOV?
I am using APEX 3.2
Thanks and regards
Edited by: ponic on Jun 22, 2011 7:54 AM

Thanks for the suggestion.
I have found another way to resolve my problem.
http://djbramer.blogs.plymouth.edu/2006/08/14/apex-parent-child-select-lists-and-onchange-submitting/
By following the above I could preserve values in my LOV's
Regards

Custom propertie's values are not updated for workflow metadata

Hi,
I've a requirement where I need to add and update some properties. to /etc/workflow/instance/<Instancename>/data/metadata node.
I've two workflow Process steps,
Process step 1:
    Adds some properties to metadata.
Process step 2:
    Updates the propertie's values which are added in Process step 1.
But the issue is update is not working when the node is /etc/workflow/instance/<Instancename>/data/metadata.
i.e. In the step 1, Properties are added to metadata node but In the step 2 propertie's values are not updated to the same node.
Here is my process code:
=================================================
import java.util.Locale;
import java.util.StringTokenizer;
import javax.jcr.Node;
import javax.jcr.Session;
import org.apache.felix.scr.annotations.Component;
import org.apache.felix.scr.annotations.Properties;
import org.apache.felix.scr.annotations.Property;
import org.apache.felix.scr.annotations.Reference;
import org.apache.felix.scr.annotations.Service;
import org.osgi.framework.Constants;
import javax.jcr.Value;
import com.adobe.granite.workflow.WorkflowException;
import com.adobe.granite.workflow.WorkflowSession;
import com.adobe.granite.workflow.exec.WorkItem;
import com.adobe.granite.workflow.metadata.MetaDataMap;
import com.adobe.granite.workflow.exec.WorkflowProcess;
import com.adobe.granite.workflow.model.WorkflowModel;
import org.apache.sling.api.resource.ResourceResolver;
import org.apache.sling.api.resource.ResourceResolverFactory;
import org.apache.sling.jcr.resource.JcrResourceUtil;
import org.apache.sling.api.resource.PersistableValueMap;
import org.apache.sling.api.resource.PersistenceException;
import org.apache.sling.api.resource.Resource;
@Component
@Service
@Properties({
       @Property(name = Constants.SERVICE_DESCRIPTION, value = "Test"),
       @Property(name = Constants.SERVICE_VENDOR, value = "Adobe"),
       @Property(name = "process.label", value = "Test 1")})
public class Test1 implements WorkflowProcess
    @Reference
    private ResourceResolverFactory resourceResolverFactory;
          public void execute(WorkItem workItem, WorkflowSession wfsession, MetaDataMap metadata)
                              throws WorkflowException {
                    System.out.println("Testing");
        try{
            ResourceResolver resolver;
            resolver = resourceResolverFactory.getAdministrativeResourceResolver(null);
            String instancePath = workItem.getWorkflow().getId();
            Node instanceNode=null;
            Session jcrSession = wfsession.adaptTo(Session.class);
           String payload = (String) workItem.getWorkflowData().getPayload();
           //instanceNode=JcrResourceUtil.createPath(payload+"/jcr:content", "nt:resource","nt:resource", jcrSession, true);
                              instanceNode=JcrResourceUtil.createPath(instancePath+"/data/metaData", "nt:resource","nt:resource", jcrSession, true);
                              System.out.println("Test: instance PAth:"+instanceNode.getPath());
            Resource resource = resolver.getResource(instanceNode.getPath());
                if(resource != null)
                    PersistableValueMap valueMap= resource.adaptTo(PersistableValueMap.class);
                    valueMap.put("name", "Rajesh");
                    valueMap.put("id", "A002");
                    valueMap.put("designation","SE");
                    valueMap.save();
                    System.out.println("Name:"+valueMap.get("name"));
                    System.out.println("Id:"+valueMap.get("id"));
            jcrSession.save();
            resolver.close();
        }catch(Exception e)
            System.out.println("Exception:"+e.getMessage());
===================
The code works fine when the node is payload/jcr:content.
Note : Process 1 and Process 2 code is same expect the values I'm passing to the PersistableValueMap.
Any pointers would be more helpful..
Thanks
Siva

Is there anything wrong in my code/ it's a bug..
Thanks
Siva

Lead time values are not appearing in the report for current year.

Hi friends,
Iam checking a report in production. where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
how can i get values in the report.
Thanks ,
VRV.

Hi,
Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
Eg: 5 Minutes + 5 Kilograms = 10
You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
Assign if helps...
Regards,
Suman

Values are not showing in report

Hi,
I have created a report with EVDRE containing several columns. When I use MemberSet: "SELF" for all columns, it shows me the data I have uploaded correctly.
However, if I choose "MEMBERS" for any of the columns, the value field is empty. This is totally incorrect as I get several rows with the "MEMBERS" option, and one of the rows contains exactly the same filtering as when I use "SELF" for all columns. So that row should show a value, but it is empty.
If I choose SUPRESS:Y, it returns 0 rows.
Example ("SELF" chosen):
NAMEID, ADDRESS, TIME, SALARY
A, X1, 2009, 10000
Example ("MEMBERS" chosen for NAMEID):
NAMEID, ADDRESS, TIME, SALARY
A, X1, 2009, (blank)
B, X2, 2009, (blank)
C, X3, 2009, (blank)
Has anyone encountered this before?
Thanks,
Sam

Hey Sam,
I have some additional questions to help me understand what is going on.
What other dimensions exist in the application this report is running in, besides NAMEID, ADDRESS, TIME, SALARY?
What dimensions are in the COLKEYRANGE, besides SALARY?
What are your expansions set as (SELF, MEMBERS, etc) for the other row/column key dimensions?
Are you sure that all the other dimensions are not changing when you go from SELF to MEMBERS? I know this is probably not the case but I thought I would ask anyways.

Heirarchy values are not displaying correctly in report.

Hi,
I am having a heirarchy field in my report.
I have 2 local RKF's in my report and 2 manadatory variables(which are FISCAL YEAR AND CAL MONTH).
When i am executing the report , it is displaying the Heirarchy values with respect to one restricted KF.
The heirarchy values correspoding to other RKF are not getting displayed properly, it is showing as (NOT Assigned).
Its giving the correct values for the RKF's but not showing the heirarchy values.
I hided the 2nd RKF, then also its showing in the same way.
Please help me on this,
Thanks in advance!

Hi, Saro,
>
I have taken a std. report to customize, and the name of the report is Asset Retirements from Fixed Asset module.
From the existing base query, i have added some query to customize it.
I have summed the cost column in the report using summary column.
For example, im passing a parameters which displays 5 lines in the report output. Im getting the cost value correctly in all the 5 lines, but when i tried to sum all the 5 lines, it is taking the first line of cost value and it is not summing the cost value of all the 5 lines in the report. I dont know why this problem occurs.
Summary column should be place one level up of the query and set the following values under summary
Function
Source
Reset As

Lov Values are not showing for Discoverer Reports in Application

Similar Messages

Maybe you are looking for