Low battery warning percent fixed??

I have Vaio VPCYB15AG with Win 7 Ultimate SP1 32Bit retail. In it's advanced power options even though I can set percentage value for Low battery warning, I find that the warning is given (Blinking green power LED) when battery falls to 12%.Is this level kind of hard wired into the product or will it be a software / hardware bug?Thanks 

 
Hi mmp_2013, 
Thank you for considering Sony Community! 
If the LED or the light indicator is blinking, then something is going on with the battery. It could be hardware but we cannot tell right away. Please follow the steps here to isolate your issue: 
Check the battery health on Vaio Care (Desktop) - If indicated as "critical" then it already hardware issue 
Power cycle - Remove the battery and all peripherals -> press and hold the power button for 5 seconds OR, if the battery is not removable, remove all peripherals-> look for a battery off button on the bottom of the laptop -> push the button for 5 seconds -> you may use a safety pin if you see a pinhole.
Reset BIOS - Turn off the unit -> press and power button and immediately, keep hitting F2 key. Once in BIOS, go to Exit tab -> Get Default Values -> hit Enter -> Save changes and exit. 
Download or update Sony® Shared Library, Sony® Firmware Extension Parser Device Driver, BIOS Update Utility from Sony's website based on your location or from where you purchase the laptop. 
Your Vaio VPCYB15AG is an Asia-Pacific model and we have limited information about your unit. 
For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
Hope these help.
Regards,
Vincent 
If my post answers your question, please mark it as "Accept as Solution"
 

Similar Messages

  • Macbook no longer "sleeps" after 'low battery' warning, just suddenly dies

    My macbook (just over a year old) used to give me a warning with 10 minutes left that it would sleep so as my data was not lost, if I didn't plug it in. However, recently, it has stopped doing this - instead of sleeping, if I don't get to a power source in time within 10 minutes, it simply cuts out, with the sound of the hard drive stopping - like if you shut down a frozen macbook with the power button.
    This is REALLY irritating - what's going on? Why does it not sleep anymore, and is there any way to fix it?
    I'm on Tiger 10.4.11, with an intel macbook...

    Same Problem here. Tried several calibrations, smc and pram zap (well i guess there is no pram any longer so it zaps something else). Now I found another post where they talk about the battry 1.2 update. http://discussions.apple.com/thread.jspa?threadID=1449128&tstart=60
    I remember when trying to do an battery update to 1.3 manually the update told me that it is not for my macbook. But - I found the 1.3 update Bundle in /System/Library/Configuration/BatteryUpdater.bundle
    1. I Removed /System/Library/Configuration/BatteryUpdater.bundle from my system
    2. rebooted
    3. Emptied trash
    4. Installed update 1.2 by Softwarupdate.
    I will now do an SMC reset an then let the battery run low and watch what happens.
    Then do a calibration.
    I have the problem here in different ways. Sometimes Macbook shuts down suddenly after low battery warning, sometimes it sleep, almost never it hibernates.
    My Battery was replace after showing the x symptome about a year ago but now it looks bad again
    Full Capacity (in mAh): 3866
    Remaining Capacity (in mAh): 1982
    Power Consumtion (in mA): 1564
    Voltage (in mV): 11974
    Number of cycles: 148

  • N97 Low Battery Warning

    Is there a way to manually discharge the battery on an N97? Or alter the time between getting the first low battery warning and complete battery discharge?
      From the first time I get the warning to actual discharge takes ages.Yes that can be a good thing but if, like me, you prefer to let the battery completely discharge it can be like waiting for Christmas.
    I know I can use the music player, camera, video etc to help discharge the battery. But is there a more specific and faster way?

    You should not let the battery discharge completely. It can damage the battery. The battery prefere to have as much juice as possible on it all the time. Once a month you could discharge it to like 10-20 percent.

  • Low battery warning when battery full

    This only happened to me this one time, but I have my iphone plugged in and the battery icon says it is fully charged, but I received a "low battery" warning.
    Any thoughts as to why this may have happened?
    Thanks!

    What version of firmware are you on? There were battery gauge problems in 3.1.2 that 3.1.3 is supposed to fix. Meanwhile, you can try running the battery down until the phone shuts off, then plug in to the wall charger for 4 hours. Do this twice. if it still doesn't work right you may have a bad battery; take it to Apple.

  • Low battery warning. (cross post)

    at what percent do you usually get this warning at? on my iBook i would get it at 4% but now on my MB i get it at 8% and when it drained to 0 my MB shut off and didnt go to sleep? is that normal?

    I keep getting a low battery warning when I start up my laptop.  
    I usually have it plugged in when I use the laptop.
    It is saying I might need to replace the battery.  Has anyone else had this problem?

  • [SOLVED] Low battery warning form acpi

    Hello!
    I hope you could help me out, as I am stuck.
    I am trying to automate pm-utils stuff on my laptop, that I have until now been doing by hand with CLI. I installed acpid and I really like how it works as it is very easy and clean to add event handling for closing laptop lid etc.
    But I was unable to use /etc/acpi/handler.sh to detect low battery warning. Only event that is received under "battery" is when the AC adapter is plugged in or battery is removed/inserted, but not when battery is low. 
    I tried to find more info on this, but discovered only that it is supposedly possible to configure alarm level in /proc/acpi/battery/BAT1/alarm, but that file seams to be depreciated and it's replacement (?) /sys/class/power_supply/BAT1/alarm contains a number resulting in about 3% charge, that should have been sufficient for at least writing to log file if any event was received from the battery, but nothing was. (And anyway, I don't know how to configure it using this file, as I am not allowed to write to it and it gets overwriten by something.)
    So I could really use some pointers on why the acpi event for low battery doesn't get generated (or why I am missing it) or what alternatives I have.
    I really would not like to run a cron job for checking battery level, as the acpi event method seams much more beautiful to me and would allow me to sleep better.
    Thanks a lot!
    Last edited by beatle (2012-01-06 01:20:29)

    /dev/zero wrote:No worries :-) If you can think of any ways to improve the script, I'd be interested to know. It isn't perfect because output from "acpi -b" is unpredictable.
    I did adapt your script a bit to suite my needs (Thanks for showing how to write deamon scripts! I haven't thought that it is so straightforward and beauty full.) , but I wouldn't say I improved it as I am basically illiterate in bash.
    For now I deal with the output of "acbi -b" by searching for the "NN%" (with grep, as I know not of a better way) - remaining percent of battery charge - in it, as I suspect this sub string  would allays appear in "acbi -b" output even when the 'remaining time' part is unpredictable (haven't checked it though!).
    Also, my laptop is usually on mute so I changed the text-to-speech warning to a i3-nagbar popping up. (And along the way learned how to control spawned processes in bash! I love just GNU/Linux!).
    /usr/sbin/battery_monitor_loop
    #! /bin/bash
    SLEEP_TIME=5 # Default time between checks.
    SAFE_PERCENT=30 # Still safe at this level.
    DANGER_PERCENT=15 # Warn when battery at this level.
    CRITICAL_PERCENT=5 # Hibernate when battery at this level.
    NAGBAR_PID=0
    export DISPLAY=:0.0
    function launchNagBar
    i3-nagbar -m 'Battery low!' -b 'Hibernate!' 'pm-hibernate' >/dev/null 2>&1 &
    NAGBAR_PID=$!
    function killNagBar
    if [[ $NAGBAR_PID -ne 0 ]]; then
    ps -p $NAGBAR_PID | grep "i3-nagbar"
    if [[ $? -eq 0 ]]; then
    kill $NAGBAR_PID
    fi
    NAGBAR_PID=0
    fi
    while [ true ]; do
    killNagBar
    if [[ -n $(acpi -b | grep -i discharging) ]]; then
    rem_bat=$(acpi -b | grep -Eo "[0-9]+%" | grep -Eo "[0-9]+")
    if [[ $rem_bat -gt $SAFE_PERCENT ]]; then
    SLEEP_TIME=10
    else
    SLEEP_TIME=5
    if [[ $rem_bat -le $DANGER_PERCENT ]]; then
    SLEEP_TIME=2
    launchNagBar
    fi
    if [[ $rem_bat -le $CRITICAL_PERCENT ]]; then
    SLEEP_TIME=1
    pm-hibernate
    fi
    fi
    else
    SLEEP_TIME=10
    fi
    sleep ${SLEEP_TIME}m
    done
    Hm, and just now I got an idea, that, in order to avoid the unpredictable "acpi -b" I could use the acpi information form /sys/class/power_supply/BAT1/* directly as I already have a deamon running. Will try that out.
    Last edited by beatle (2012-01-06 18:17:41)

  • MacBook shuts down after low battery warning

    Hi,
    up until recently my macbook's battery has been working just fine. but then lately i noticed that a few minutes after it displays the low battery warning it shuts down by itself.
    before, when the low battery warning would display i could still continue working on my macbook for several minutes until it goes to sleep -- only then would i connect it to the power cord.
    unlike the other posts (concerning batteries) that i've read, i have no problems turning my macbook on/off before or after this event has occured. neither does it shut itself down when the battery is halfway. my problem really only happens after the low battery warning has been displayed.
    i wanted to calibrate my battery but then that would require my macbook to go to sleep once it reaches a battery level of less than 5%-10% -- mine just shuts down completely.
    is this shutting down thing a substitution mechanism to save the laptop's memory -- instead of going to sleep, it'd just shut down?? how can i fix this?
    thanks in advance for the help.
    MacBook   Mac OS X (10.4.8)   512MB, 2GHz Intel Core Duo

    For what it is worth, I now have the same issue. Only I don't even see the low battery warning, it gets to 15% or 10% and bang, no power. This is not good, by the way and is bound to corrupt something in the system as OSX requires some house keeping when you shut down the computer properly. This instant off is not a proper shut down. I took my MacBook in and they wouldnt simply replace the battery, they want to keep the computer and give it back to me in a few days. I rely on this puter for work 5 days a week, so I was trying to avoid this.
    Oh well I guess a trip to the Apple store is unavoidable.
    Regards,
    RacerX

  • No low battery warning on new Macbook Pro (Mid 2012)

    Hello!
    I just purchased my macbook pro this saturday and it's my first mac. I've noticed that I do not receive a low battery warning at all. What can I do about this?

    Thanks for the battery info, but the steps for calibrating the battery don't apply to current laptop models.
    >>
    Portables with built-in batteries
    Current Apple portable computer batteries are pre-calibrated and do not require the calibration procedure outlined in this article.

  • No "Low Battery" warning on new (November 07) MacBook - Kernel Panic

    Hello,
    I'm not sure is this is the right forum for this, but since the problem occurs during a specific battery state, I'm going to post it here.
    I just got one of the new November 07 MacBooks. The machine is great, and screams with the pre-installed Leopard.
    First thing I did was plug it in to charge as I started configuring software. Once it was fully charged, I pulled the plug, and began using it on battery. My plan was to calibrate the battery, by running it all the way until it forced a sleep, then shutting down and plugging it in again, as Apple recommends.
    Problem is, I never got the "Low Battery" warning, or even the sleep warning. At around 10 minutes of power left, I simply got a kernel panic. A few seconds later, the laptop just switched off.
    I plugged in again for a few minutes, then ran it down again to see if I could reproduce the error, and I did get the low battery warning.
    The next time the battery ran down, it gave me the kernel panic.
    Is this happening to anyone else? Is it a new MacBook problem, or a leopard power management problem? I'm having no other issues at all with the MacBook or Leopard. Any help would be appreciated.
    Thanks!

    I'm a little hesitant to force a firmware update on a MacBook it wasn't meant for. These are brand new models, and I would think Apple didn't ship them with the known faulty batteries or bad firmware.
    The frustrating thing is I have no way of knowing who the culprit is. Is it the brand new OS that I'm sure has a fair share of bugs? Is it the new hardware having a power control issue? Or is it a combination of Leopard and the new hardware? I was hoping to find some users who had the same problem so I could narrow it down. Battery drains out, kernel panic, then the machine shuts off after a few seconds. Funny thing is, the indicator says I have like 10 minutes or so left, but it appears that the battery must be completely dead, since it forces a panic and the machine just dies. So it might be a calibration error. The Mac thinks it has some juice, but in reality it's just about dead.
    I made an appointment for the Apple store tomorrow, so we'll see what they have to say. It's otherwise running beautifully, thankfully.

  • What can I use for a low battery warning on a Mac Book OSX10.8?

    What can I use for a low battery warning on a Mac Book OSX10.8?

    What you should see above all your windows when your battery gets to low.

  • I just got a "low battery warning" on my iMac... What is that all about???

    Just got a low battery warning on my screen. What does it mean? What do I have to do to correct this? Could this be why it seems to take so long for pages to refresh/display; why the screen seems to frequently freeze and why I frequently see that spinning rainbow wheel?

    Your pram battery probably needs renewing.
    You can check which one you need here:
    http://support.apple.com/kb/HT2295?viewlocale=en_US

  • Leopard's Low Battery Warning on iBook

    Hey everyone,
    I recently upgraded my iBook G4 to Leopard. Everything works fine until I run the battery down low. When the low battery warning pops up, it either causes a spinning pinwheel or just appears as a white rectangle with a shadow. Then, after slowing down my Mac for a few seconds, the warning window disappears and the airport and battery icons in my menu bar disappear. A few seconds more, and warning and the icons reappear. The only way for me to stop this cycle is to plug in the adapter.
    Help!
    Matt

    Turns out I was having more problems than just the indicator... after replacing my power adapter everything worked fine.

  • E63 Low battery warning tone

    It seems that I am not getting low battery warning from my phone. Please advise how to set it up. It is an E63 phone. Thanks

    Within profiles, have you set warningtones off?

  • Low Battery warning at 90%

    I have a G4 ibook, that didn't get used for a long time, (over a year) and  I am using again after my newer laptop was stolen. The battery may be near the end of it's life, but I am confused by getting a "low battery warning" dialog box, when the battery indicator says 90%.
    If it was just dropping quickly I'd assume the battery was toast, but I don't get the conflict between the two pieces of information.
    Is there any point in resetting the PMU? Should I just consider this a not-so-portable until I replace it?

    Have you tried calibrating the battery?
    Calibrating your computer's battery for best performance
    If that doesn't help, resetting the PMU may not help, but it wouldn't hurt.

  • Low battery warning for my iMac keyboard

    I keep getting a low battery warning for my iMac keyboard even when it has brand new batteries. Is there a way to switch this off or reset it so that it doesn't keep informing me?

    Hello! I also have this problem. My keyboard is brand new and so also the batteries. I have tried with different types of batteries but get the same warning. I also have tried to erase the device in the bluetooth settings and add it again. Nothing works. It is a pity because I like mac.

Maybe you are looking for

  • Erro impressão DANFE - IE e ST da J_1BSTAST

    PessoALL, Estou com um problema um pouco crítico... será que alguém pode me ajudar? O programa de impressão da DANFE não está extraindo a informação de Inscrição Estadual de Substituição Tributária da tabela de customizing (J_1BSTAST). Precisamos faz

  • SAVE defaults in Photoshop CS4 not working.

    I shoot in RAW format and use Lightroom 3 to open all new photos. When I first do a SAVE it saves it with the Byte Order as IBM PC though I work on a MAC and want MAC. If it's a layered file it defaults to the TIFF options as ZIP (I want LZW) and IBM

  • Ctrl D to place items in illustrator

    I spend most of my working life using InDesign, where Ctrl D is used to place an item. It would be good to be able to do this in illustrator as a matter of consistency between the programs. Thanks for listening! best regards, Steve

  • Contracts - Service master price update

    Hi All, There was requirement in which the contract service master prices were required to be changed. To update new condition price in the condition records, we created a program to update these values using ML52. Eg. Contract A - item 10- Service S

  • HT202159 Problem downloading Mountain Lion

    I purchased Mountain Lion to upgrade my MacBook's OS.  It was taking a while to download, when I checked the download this morning (after leaving it to download overnight), it gave me a message "an error has occurred".  I tried resuming the download