Low battery - when sleeping, what should happen

When the battery is low, and I put the macbook pro to sleep, when I come back to the machine its dead. Now I can understand that the battery has exhausted, but my trusty Thinkpad would have hibernated so it wouldn't matter. Just mains, and off you go. This doesn't happen with the Mac, it's a start again, and possible corruption. Is this meant to happen?

Several components, including the RAM, remain powered during sleep - if the battery is low when you sleep, it can run all the way down, forcing a shutdown. No corruption should occur - the MBP uses a "safe sleep" (writes the current state to the hard disk, but this is not saved across a restart). However, a complete shut down will require you to restart.
Personally, I find a complete boot up on my MBP significantly faster than my HP laptop coming out of hibernation.

Similar Messages

OK, here is my problem...i leave my ipod classic charging for 2 days and it still has the 'Please wait, very low battery" sign! what should i do? Please answer!

OK, here is my problem...i leave my ipod classic charging for 2 days and it still has the 'Please wait, very low battery" sign! what should i do? Please answer!

When you connect the iPod to the adapter or PC, you should see either of these signs on the iPod Screen .
If you just get
It may mean that your Adapter is not giving enough juice, because
the adapter or the cable is defective or
your bottom dock connector is dirty with lint or dirt.
Have a nice day!

When i plug in my ipod to computer what should happen?

I'm trying to download a book off itunes or anything off itunes onto my ipod ( 5th gen 30gb ) when I plug in my ipod all I get is a beep from my computer, what should happen?

Hey fink51,
When you first connect your iPod to your computer, it should automatically install the required drivers etc. You then may want to open iTunes (or configure it to open automatically every time you connect).
If your iPod is not displaying in iTunes, or Windows, we'll need to start troubleshooting. See the following resource:
Apple - Support - iPod touch - iTunes Troubleshooting Assistant
http://www.apple.com/support/ipodtouch/assistant/itunes/
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M.

SetRollbackOnly and EJBException..what should happen?

I am wondering what peoples opinions are about what should happen when commiting a transaction in the following scenario.
I have a transaction started by a stateless session bean method. This method just finds an entity bean and sets one of its attributes. When this stateless session bean method finishes, the transaction is commited by the container. While commiting the transaction, the container calls the ejbStore method of the entity bean. The ejbStore method calls a method on a different stateless session ejb. This stateless session ejb method calls setRollbackOnly and throws an ApplicationException. The entity ejbStore method catches the ApplicationException and throws it nested within an EJBException.
The ejb2.0 spec says that the container should throw a javax.ejb.TransactionRolledbackLocalException if it can't commit a transaction. This is what I receive, but my question is what would you expect the nested transaction to be?
I would expect the EJBException that I threw from ejbStore to be the nested exception.
ie. I would expect this....
javax.ejb.TransactionRolledbackLocalException: Error committing transaction:; nested exception is: javax.ejb.EJBException: nested exception is: au.com.sparq.test.ApplicationException: ApplicationException a b c...
But as soon as setRollbackOnly is called, I will only ever receive this exception....
javax.ejb.TransactionRolledbackLocalException: Error committing transaction:; nested exception is: weblogic.transaction.internal.AppSetRollbackOnlyException
Why is an AppSetRollbackOnlyException being thrown by the container when I have told the container to rollback the transaction by throwing the EJBException from the ejbStore method of the entity ejb? In this case, the container shouldn't care that setRollbackOnly had been called. It should only be if the ejbStore method doesn't throw an EJBException that the AppSetRollbackOnlyException is thrown.
The side effect of this behaviour is that I can never get access to the ApplicationException thrown within the ejbStore method, so I can never tell what caused it to fail.

This is the expected behavior since Windows XP/Windows Server 2003.
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

HT2101 MY IPHONE 5C TURNS OFF OR SHOW LOW BATTERY WHEN I'M OUTSIDE IN TEH WINTER EVEN WITH IT IN MY POCKET. Why?

Is the battery bad or system issue for reason it dies or shows low battery when i'm outside in the cold?

Environmental Requirements
Operating ambient temperature: 0° to 35° C (32° to 95° F)
Non-operating temperature: –20° to 45° C (–4° to 113° F)
Relative humidity: 5% to 95% non-condensing
Operating altitude: tested up to 3,000 metres (10,000 feet

New battery, turns off at low battery-not sleep

Any help greatly appreciated.
New battery and trying to calibrate it. Turned PB off, installed new battery, plugged it in and fully charged it. Turned PB on, unplugged it and used it. I got the warning about the low battery message to plug into AC power or it would soon go to sleep. So, I kept on using it to force the sleep. Instead after a bit it simply shut down. No pulsing light. I charged it back up (overnight) and turned it on and when I go to 'More Info' in the Apple menu and look at the Power information I see:
Battery Information:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 4544
Remaining Capacity (mAh): 4379
Amperage (mA): -1428
Voltage (mV): 12105
Cycle Count: 0
No first low level warning and no upping the cycle count. What should be my next step? I've heard about possibly resetting the PRAM, is this one of those times?
(BTW, I am able to put the PB to sleep when I select Sleep from the apple menu. That works fine.)
Message was edited by: CeeZeeCZ

Only the apple ones will put the machine to sleep, any others will just abruptly shut the machine down.
This has never been my experience. Since 1994, I've bought several third-party batteries for several different Powerbooks, and all have behaved properly vis-a-vis sleep on low battery. They've all been bought from reliable Mac-centric vendors and borne reputable brand names, and none cost less than $90. I've never owned a third-party battery that failed to trigger sleep as it neared full discharge, except when it was very old and tired.
I have, however, seen many reports here of cheap third-party batteries picked up on Ebay, some of them bearing apparently counterfeit Apple labels, that failed to trigger sleep on low battery, provided false or impossible battery condition readouts, failed to charge, never gave any low-battery warnings, or otherwise misbehaved.
You get what you pay for in Powerbook batteries.
Message was edited by: eww

BRM: What should happen if violations arise while role creation???

Hi,
I have configured the role methodology and it is working fine. But, I would like to know if any violations are arising while performing analysis, what should be done? Should be routed to some one? If yes, then how can we do it?
What should be the standard process?
Please help me understand this.
Regards,
Faisal

Hi Faisal,
If you have conflicts on action level that is not an issue, if on permission level nothing was reported.
From practical perspective I prefer to have one role for one business activity, each time when broad roles where created it was very difficult to resolve SoD issues. Maybe instead of one you will have to assign two / or more to users, but long term it is really easier to maintain environment SoD clean. All other roles could go through FF.
Unless you have some specific situation (like job position roles or sth similar), please share if this kind of approach may be suitable for you environment, or what could be the blocker.
Best regards, Andrzej

HT201401 my iphone 5 just went black and battery was fine, what should i do?

My phone just went black and the battery was only half way ? what should i do?

Try here...
iPhone and iPod touch: Frozen and unresponsive

My ipod doesn´t charge the battery with ios6, what should i do?

I have updated the system to ios 6, but after that change I have noted that my ipod doesn´t charge the battety, I have checked the cable with other ipod (ios5) and it´s working, also when I connect it to my computer, it can´t be detected, what should i do? I can´t find how to solve it.. please help me

See the not-charging topic of:
iPod touch: Hardware troubleshooting
Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and cracked or broken plastic.

I started to do a backup from my iphone 5s following a notice the device gave. but it was unsuccessful and in the first use I saw my iphone battery drains drastically. what should i do now?

I started to do a backup on my iphone 5s following a notice the device gave. but it was unsuccessful and in the first use of my iphone I saw my iphone battery drains drastically. I had upgraded the software to ios 7.1. what should i do now? is this a problem with the battery?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

My BT Keyboard only shows in "any device" when pairing, what should I do?

Dear All,
just like what I typed on the subject, my BT keyboard only shows in "any device" not "keyboard" when I was pairing under "setup my bluetooth device". What should I do to solve the problem? I do have BT mouse, it works great.

Hello,
this sound to be pretty much the same problem as to me
http://discussions.apple.com/message.jspa?messageID=1624216#1624216
an others:
http://discussions.apple.com/thread.jspa?threadID=221930
http://discussions.apple.com/thread.jspa?threadID=321808
As far as I can see mostly Keyboards between Oct and Dec 2004 are involved. I would appreciate if Apple could have a careful look on this issue and take resp. actions as e.g. an extented repair or replacement program!
Best regards Stefan

Sometimes my phone does not make its usual noise when I wake it or put it to sleep what should I do?

When I wake the iphone 4 up it makes the wake up click noise and then other times it doesn't and then when I touch the button to make it go to sleep it makes the turn off click noise and then other times it doesn't - how do I fix this? as it's only been doing it for the last 3 weeks or so and nothings happened to the phone so I have no idea whats going on.....

How long have you had your phone? Because if you've had it a long time, the battery in the phone might of died on you. Or have you dropped it in water, snow, from high up? All those things could of disconnected something internally in your phone, or permentaly damaged the internal hard drive its self, or the sims card.

How to configure low battery auto-sleep ?

Hello,
When my battery is low, I've got an alert to tell me to plug my Mac.
Though, this alert comes really to soon (when it's ~7%) and I like to do full cycles, so I usually wait to reach 2-1% to plug it.
But it happens that I forgot to plug it and then my mac turns off because of lake of battery.
How could I configure my mac to tell it to go to sleep if the battery charge reaches 1% ?
Thank you !
Pit

Thank you !
That's a good workaround !
I found SlimBatteryMonitor, that seams to be a good equivalent to Watts, but Free ! ;-)

Droid Charge shut off by itself, then reads low battery when turned back on.

I have had my Charge about a year now, and I have just recently begun to have problems with it. Pretty convenient to have these start after warranty expires. So, I can be doing anything (texting, web, app usage), and the phone will turn off. When I power it back on, the battery is red. But, if I pull the battery, it usually goes back in the blue, but not anywhere near where the charge point was before. I suspect I have a worn out battery, but am not sure. The battery is slightly swollen (indicating usage), but this does not explain how I can to from a full battery to critically low in an instant. Any thoughts?
Thanks!!!

When your battery is fully charged it is at 3.7 Volts and your phone says that it's fully charged. But if when you turn it on and use your phone the battery almost immediately it shuts off your phone then your battery has failed. What happened is that it has virtually no AMPS (power) even though it is at 3.7 volts.
Your best recourse is to buy a new battery.
Don't beat yourself up complaining or blaming the phone, just get a new battery. Remember, life is short, consider eating desert first!
JerryF

Macbook Pro drains a lot battery when sleep

When I put my computer to sleep it drains a lot battery life. Today I put my computer to sleep for a hour and it drained 3%. My computer is 3 months old and the battery only has 55 charges on it.

Good evening chilei89,
What you have reported seems absolutely fine to me. If you truly are concerned about your MBP only consuming 3% of battery power while it is asleep then you can try changing your battery consumption settings. You may also try plugging in the AC adapter or just shutting it down instead of putting it in sleep mode if you are not going to use it for a while and you are not going to use the AC adapter. I hope this helps you out. Again, I don't see anything you have to be concerned about. Thank you.
AMMOCAN

Low battery - when sleeping, what should happen

Similar Messages

Maybe you are looking for