Low data transfer with memory stick on a Satellite A100-207

Hi, whenever I stick the memory stick from my Sony Ericsson P990i Smartphone into my notebook it says it has detected new hardware and needs to reboot to use it.
I kinda expected this first time, but it does it EVERY TIME now. Which means transfering files onto the memory stick takes a lot longer than it should and it is far easier (but a lot less convient) to transfer them via my network to my main home PC and use the card reader in my Epson printer to put the files on the memory stick.
Anyone know why this happens and how to stop it. I need to regularly update files on the memory stick as they are edited both on the laptop and the phone (via QucikOffice which comes pre-installed and alows editing of word and excel files).
Any help or ideas is appreicated.
Andy

I agree with Andrej. You should be 100% sure that this card is compatible with the card reader on the notebook.
Furthermore what transfer rate do you expect?
I think every card has different write/read access times. So do not compare it with other cards.

Similar Messages

  • Low data transfer between my iMac & Time Capsule

    Hello,
    I have just purchased 1GB Time Capsule yesterday to get a back-up of my iMac HDD, and also to use it as an external HDD. I was much interested by the wireless functions.
    After the installation, Time Machine started to save a back-up of my HDD (more than 200GB). But after one full night, only 7GB out of 220GB was transfered wireless.
    With a so low data transfer, it will take 20 days for the full back-up.
    Is it normal ?
    Do I have to make the first back-up though ethernet (wired) ?
    I am working on big video files (xx GB), so I really need to increase the speed of data transfer. Is there someting to change in the settings ?
    Thank you for your help, it will be highly appreciated...
    Regards,
    Jean-Philippe, Paris, France

    Hello,
    I have just purchased 1GB Time Capsule yesterday to get a back-up of my iMac HDD, and also to use it as an external HDD. I was much interested by the wireless functions.
    After the installation, Time Machine started to save a back-up of my HDD (more than 200GB). But after one full night, only 7GB out of 220GB was transfered wireless.
    With a so low data transfer, it will take 20 days for the full back-up.
    Is it normal ?
    Do I have to make the first back-up though ethernet (wired) ?
    I am working on big video files (xx GB), so I really need to increase the speed of data transfer. Is there someting to change in the settings ?
    Thank you for your help, it will be highly appreciated...
    Regards,
    Jean-Philippe, Paris, France

  • Why can't I find "Data Transfer and Memory " option in channel property node?

    Hi All,
    I'm trying to find some properties such as "Data Transfer and Memory " in my "DAQmx Channel" property node, as below
    But, in my Labview 8.5, I can't find it. I re-installed NI-DAQmx, but it didn't work. What I can get is
    Did I miss something? Thank you.
    Regards,
    Bo
    Message Edited by foolooo on 10-23-2008 07:02 AM
    My blog Let's LabVIEW.
    Solved!
    Go to Solution.
    Attachments:
    temp.JPG ‏11 KB

    Hi Andrey,
    Thank you for your reply. But I tried this on another computer on which lv 8.6 was installed, and it worked. I just simply dropped the channel property node, and didn't connect with any channel vi, and there were available options on that one. But for this pc, it doesn't work. I also configured the hardware in Mea & AE, it didn't help.
    btw, my labview is full licenced.
    Best wishes,
    Bo
    My blog Let's LabVIEW.

  • Data transfer with IDoc

    Hi All,
    Can any one please explain me about "Data transfer with IDoc".

    Dear Prasad,
    Using the IDoc option , you will not have a staging in BW like PSA were you can do corrections if required,
    We can use IDOC option when we are very sure that data we are loading is error free,
    and in older versions we are forced to use only IDOC option when doing hierarchy loads and its ruled out now,
    Data transfer with IDoc
    The data is packed into IDocs by the source system and sent to the Business Information Warehouse. In BW your data is saved persistently and intransparently in the IDoc store. From there the IDocs can be updated in the IDocs manually or automatically.
    It is used for hierarchies load Limitations with IDoc is:
    transfer structure must not have more than 1000 Bytes in the character format.
    If it is a critical data we can use IDocs it can't be modified here. In case the load fails we need to load data from source system.
    http://help.sap.com/saphelp_nw04/helpdata/en/7d/724d3caa70ea6fe10000000a114084/frameset.htm
    Hope this helps u..
    Best Regards,
    VVenkat.
    Edited by: Venkata Narayana Jakkampudi on Dec 23, 2008 12:03 PM

  • IPhoto Won't Transfer to Memory Stick

    I'm transferring pictures from IPhoto to a Memory Stick, I get about half way through and an error message comes up "unable to create"  I've done this thousands of times with no problems.  I used three different flash drives and merged them into one event.  It's 154 pictures all together & only about 88 transfer.  HELP!

    memory sticks are formatted FAT and hold a very limited number of files - export the photos to a desktop folder and drag that folder to the memory stick - delete the desktop folder after the transfer is successful
    LN

  • Data transfer with some errors on registers. (Novice question)

    Hi experts.
    First of all i wat to say that i'm realtively novice in BW.
    I have an ods object.  I have a transformation>Data Transfer Processes>Infopackage to load data to it.
    I execute this with a process chain.
    well the roblem is that some registers I get are erroeous. That's ok, i just want lo load the OK regs, but when this happens the sistem does't load any.
    I want to load only the good registers and be reported about the errors too.
    Can someone please give me some advice about this?? I think thje secret is in the error handling customizing on the DTP, and maybe create a error DTP and something in the infopackage.
    Any tip to me please?
    Thank you!!!

    Hi,
    you need to maintain some parameters in the update tab of  the dtp.
    a) set the error handling to update valid records, reporting possible (request green)
    b) enhance the no. of error records to the size of the data packet.
    c) create a error dtp
    Now all records without error will be updated, the request will be green and so available for reporting. The records with errors will go to the error stack and can be edited there. The records of the error stack will be updated thru a error dtp.
    regards
    Siggi

  • Cardreader with Memory Stick doesnt work

    Hello,
    I have the following problem with my mega pc 180 deluxe: the cardreader dont read my Sony Memory Stick (the normal one not the pro). In this cardreader (the right one) a secure digital card works fine.
    Whats the problem? and how can i solve it?
    Thanx for any reaction,
    Gert-Jan

    Are you sure whether this cardreader support Sony Memory Stick or not?
    I don't think so but... never tried that  so...  

  • K9N SLI PLATINUM low data transfer rate

    Hi, (sorry for my pour english) I had to go back to Winxp native SATA/IDE drivers and my pc crash & BSOD problem it's gone! :D (BSOD when i install some programs or some games, listening music and moving data at the same time, etc.) now i'm available to execute multitasks without any troubles. But now the transference it's quite poor  , I think this is an easy and temporary solution for this big problem.
    I bought my PC on 2006 and the Windows XP drivers are from 2001, aren't new Nvidia/MSI drivers to fix this annoying problem?
    Thanks.
    AM2 3800+ X2
    MSI K9N SLI PLATINUM, bios 1.4
    2 x 1GB OCZ DDR2 6400 Platinum
    PSU PowerCooler 550w
    HD WD3200 SATAII
    NX7900GT

    I've got nearly the same problem, but a little worse. My data transfer rate seems very slow for a 100mb network and if I start copying files over the network, after only a couple of megs I lose connectivity to the network completely! I've removed the network cable and windows notices this, and when I put it back in windows also notices the change, but the green and orange lights on the port itself stay on solid. If I reboot windows everything comes back. I don't have problems browsing the web, seems to only happen when the ethernat port is running close to full load (for the connection speed of 100mb as apposed to 1gb).
    Anyone else seen this? I'm on the latest drivers, the latest bios and I've tried disabling on of the network ports in the bios but his didn't work.
    Kevpatts

  • USB external HD suddenly doesn't get recognized ... same with memory sticks

    I used an old Trekstor HD for TimeMachine. Worked just fine. Then, from one month to another (I kinda neglected making backups :P) the HD doesn't register when I plug it in. No sign that the MacBook even noticed that I stuck something inside it's USB port.
    But:
    * The HD works. It gets recognized just fine under windows (although windows can't read the drive).
    * The USB port works. iPod syncs just fine, USB printer prints, USB mouse mouses ...
    * other USB memory sticks are not recognized either. They work in the PC, but not in the MacBook.
    I can just assume that there's some setting that prevents OS X from hooking up external harddrives.
    I have absolutely no idea what I can do about it. Help please?
    Running OS X 10.5.8
    Message was edited by: arotto

    +old Trekstor HD+ may be clue.
    Possible HDD died, but your Win still sees something becuase USB port functions.
    Next time you plug the HDD into your MB, use System Profiler to check it.
    That may be best clue to see health of the HDD.
    And consider getting a new external HDD, at least as backup for your backup.
    Cheers!

  • Memory upgrade on a Satellite A100-912

    I own a Satellite a100-912 and I want to upgrade its memory!
    As it seems, this model supports only PC2-4200 DDR2 SODIMM modules (533 Mhz). Before bying a memory module that might regret, I want to know if there will be any compatibility issues if I use to this laptop PC2-6400 DDR2 SODIMM module (800 Mhz).
    Is it going to work even at lower clock speed (533 Mhz) or is it going to be a total waste of money?

    As far as I know the FSB is able to handle 667Mhz modules.
    You can use lower modules (533Mhz) without any problems but modules with higher Mhz will not run with full speed due to the limited FSB.
    So I dont recommend buying 800Mhz modules. Firstly they are not supported and secondly its waste of money!

  • Problems with various professional soundcards and Satellite A100

    Hi All,
    I bought a Satellite A100 less than a year ago and have had problems with 2 different professional soundcards when using Cubase.
    - M-Audio firewire solo plugged into Texas Instruments PCMCIA card
    - Echo Indigo io (PCMCIA card)
    I'm running Windows XP and Cubase SE/SX3. When running Cubase, there are cracks, sound stops for a few milliseconds.
    I've never had any problems with my old Toshiba Satellite Pro A40 notebook. This is very disappointing and frustrating. I only use my new Toshiba for the Internet!!
    Could someone help?
    Cheers,
    Fred

    This info helped me to overcome the dreaded glitch last year.
    But I have lost wireless networking on my A100 which is very annoying :-S
    See below.
    But not to my knowledge has there been proper acknowledgement of this problem by Toshiba (please prove me wrong on this Toshiba right now!!!)
    see full locked thread here...
    http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=93292#93292
    Re: Audio Glitch Problem when playing/recording on Satellite A100
    Posted: 13-Aug-2007 18:13 in response to: music27
    Hi A,
    Sorry for not responding sooner.
    The way I changed the driver was -
    Open Device Manager
    Click the '+' at 'Computer'
    Right click on the 'ACPI Multiprocessor PC' entry and select 'Update Driver...'
    When the Device Driver Wizard comes up, select 'No, Not This Time' when it asks if 'Windows can connect to Windows update to search for software', then click Next
    On the next screen, select 'Install from a list or specific location (Advanced)' and click Next
    On the next screen, select 'Don't seach. I will choose the driver to install' and click Next
    Then you'll get a list of drivers, select MPS Multiprocessor PC (assuming your laptop is Dual Core) then Next
    After that, follow any other instructions - I can only give you a step by step guide this far otherwise I'll end up re-installing the driver on my working laptop (I was just working through it and noting down the steps). I'd back up any data you have beforehand aswell - I didn't lose anything when I did it but it's better to be safe.
    When I did this procedure, I had to reinstall a lot, if not all, of my drivers - most were picked up by Windows but the odd one or two needed the drivers from the Toshiba website, I can't remember exactly which ones but it wasn't too painful. Everything works fine now, including the Wireless connection.
    Hopefully this will work OK for your laptop - it's not the exact same model I have so you may get different results but all the best anyway!
    Cheers.

  • Data Transfer with Socket

    Hi,
    we want to transfer some arrays using socket.
    On the server side we send two array (arrays of byte of ~50 Kbytes) with:
    PrintStream out = new PrintStream(client.getOutputStream(), true)
    out.write(Array of byte).
    On the client side we do not receive two stream of data of 50Kbyte, but we receive two or more stream of different size using:
    BufferedInputStream in = new BufferedInputStream(s.getInputStream()) in.read(Msg).
    Server side:
    Send Array1;
    Send Array2;
    Client Side:
    get Stream1;
    get Stream2;
    get Stream3;
    Stream1 = part of Array1
    Stream2 = remaining of Array1 and part of Array 2
    Stream3 = remaining of Array2
    Is it possible to receive each array in one stream each and not fragmented in different stream ??
    What we wanna is:
    Server side:
    Send Array1;
    Send Array2;
    Client side:
    get Stream1 (= Array1)
    get Stream2 (= Array2)
    Best Regs

    I didn't quite understand your post, given your mix of Java code and pseudocode.
    However, I shall attempt to give you some guidance:
    When you say you are using multiple streams, I am assuming that you are only using 1 stream, but reading in from it multiple times.
    With a network connection, delivery over the stream of all the content at one time cannot be guranteed. In practical terms this means that you cannot do the following:
    Server:
    send 50kb of data
    Client:
    receive 50kb of data.
    Close connection.
    What you have to do instead is:
    Server:
    send 50kb of data
    Client:
    read from stream until 50kb of data have been read.
    Close connection.
    For the above to work, you must know that you are expecting 50kb of data. If you don't know how big the data stream is going to be, there are two solutions:
    Solution 1: include length of data in send:
    Server:
    send 2 bytes representing the length of the data (in this case 12bk)
    send 12kb of data
    Client:
    read length of stream (2 bytes. Should give you 12kb).
    read 12kb of data.
    Close connection.
    Solution 2: include batch separators:
    This solution is when you want to send a number of batches down the same line (kindda what you want).
    Server:
    send 50kb of data
    send separator (e.g. '|''|')
    send 34kb of data
    Client:
    read stream until stream is closed, or separator encountered.
    if separator encountered, create new data batch, continue as above.
    The problem with solution 2, is that you now have to devise an appropriate way for escaping the separator. If the separator occurs naturally in the data you are sending, you should escape it on sending, and unescape it on reading in at the other end.
    However, after all of the explanation above, my advise to you is: use the ObjectOutputStream and the ObjectInputStream classes. With these, you should be able to send and receive the array with no problems. Follow the advice in the JavaDocs and possibly the Java Tutorial for more info on using the ObjectStreams.
    Regards,
    Manuel Amago.

  • External data transfer with KEFC.

    Hi,
    We are trying to make an upload of a cvs file with tcode KEFC with SAP ECC 6.0.
    We have defined the structure and the transfer rules (KEFA and KEFB).
    The same file has been used with SAP 4.6 with the same structure and transfer rules.
    The upload has been made correctly on 4.6 while for ECC 6.0 we have a problem.
    The screen after the upload gives a list with the data read from the csv file, and for some field the value is missing (GJAHR, PERBL and MENGE).
    Opening the log generated, an empy list of the errors is shown (the light is red but all the record are blank).
    I don't know if the problem is related to the file, but uploading the same file in 4.6, the transfer data is correct.
    We have created the same structure for the two environments with the same field and the same lenght:
    (KEFA)
    Sender field 4.6     Type 4.6     Lenght 4.6     Sender field 6.0     Type 6.0     Lenght 6.0
    BUKRS                       CHAR        4     BUKRS                     CHAR     4
    WERKS                       CHAR        4     WERKS                     CHAR     4
    ARTNR                       CHAR       18     ARTNR                     CHAR     18
    KOKRS                       CHAR           4     KOKRS                     CHAR     4
    GJAHR                       NUMC        4     GJAHR                     NUMC     4
    PERBL                       NUMC        7     PERBL                     NUMC     7
    ABSMG_ME       UNIT        3     ABSMG_ME     UNIT     3
    MENGE                       NUMC       12     MENGE                     NUMC     12
    VRGAR                       CHAR       1     VRGAR                     CHAR     1
    VERSI                       CHAR       3     VERSI                     CHAR     3
    VKORG                       CHAR       4     VKORG                     CHAR     4
    KNDNR                       CHAR       10     KNDNR                     CHAR     10
    VTWEG                       CHAR       2     VTWEG                     CHAR     2
    KTGRD                       CHAR       2     KTGRD                     CHAR     2
    PLTYP                       CHAR       2     PLTYP                     CHAR     2
    but we have identified a difference during the setting of the transfer rule (KEFB): in the 4.6 the sender field have a different lenght from the same ones in the ECC 6.0.
    We have tried to re-create a new structure, but the sender field lenght remain the same.
    Do you know which is the problem? Could be possible that the cause is this difference between the field lenght? If yes, how we can solve this problem?
    Thanks a lot for your collaboration,
    Regards,
    Jody Mancini.

    Hi Sandhya,
    checking in the KEFD tcode, all the transfer rule between sender fields and receiving fields are correct.
    Following you can find the rules:
    Rec. field      Description         Lenght      Sender field      Formula
    ABSMG       Sales quantity          8            ---                 MENGE
    ARTNR         Product                  36          ARTNR             ---
    BUKRS        Company Code        8           BUKRS             ---
    GJAHR         Fiscal year              8           GJAHR             ---
    KNDNR        Customer                20          KNDNR             ---
    KOKRS        CO area                  8           KOKRS             ---
    KTGRD         AcctAssgGr            4           KTGRD              ---
    PERIO          Period/year            14          PERBL              ---
    VKORG        Sales org.               8          VKORG              ---
    VRGAR         Record type            2          VRGAR              ---
    VTWEG        Distr. channel          4          VTWEG              ---
    WERKS        Plant                      8          WERKS              ---
    WWPLT        Price list type          4          PLTYP               ---
    The field MENGE is the Sales quantity of the input file and PERBL is concatenate of the period and year.
    The rules seems to be correct.
    The difference I wrote yesterday is relates to the lenght of the receiving field.
    In the ECC 6.0 all fields (excepting ABSMG) have a double lenght of 4.6:
    Field     Lenght 6.0     Lenght 4.6
    ABSMG     8     8
    ARTNR     36     18
    BUKRS     8     4
    GJAHR     8     4
    KNDNR     20     10
    KOKRS     8     4
    KTGRD     4     2
    PERIO     14     7
    VKORG     8     4
    VRGAR     2     1
    VTWEG     4     2
    WERKS     8     4
    WWPLT     4     2
    The problem could be this different lenght? If so, where I can modify the lenght of the receiving fields?
    Thanks again,
    Regards,
    Jody Mancini.

  • Poor data transfer with 3G on iPad2?

    I have an iPad 2 with 3G, and in recent months the 3G reception has deteriorated to being pretty much useless.  On speedtests my rates are very low.  I get 1 or 2 bars most of the time.  When I have my IPhone 4 right next to it, the reception is 4-5 bars on 3G and 3-4 mbps download rates. What gives?  I am going to get an IPad4th gen so i can get better cell service but if there will be outrageous charges on verizon for LTE4G perhaps I need ATT. But why such the difference between iPhone 4 and Pad 2?

        Hi Suzie T!
    I would be asking the same questions if I were you! Let's see what we can do to figure this out for you! The best way to determine if an issue is equipment-related or network-related is if the two devices are right next to each other. Since your iPhone is getting a better signal, the indication would be that it's equipment related and some troubleshooting is needed. I would recomment a soft reset of the iPad 2 to see if that resolves the issue. Please hold down the power key and the home key simultaneously until the Apple logo appears. Then, power back on and post back with the results.
    Thanks,
    Christina B
    VZW Support
    Follow us on Twitter @VZWSupport

  • Satellite M100: Slow WLan data transfer with 3945ABG Intel Wlan card

    Have just popped a brand new M100 with XP upgraded to SP2 onto our network and am having trouble with the Wifi.
    Everything works, just really really slowly. Takes about 5 minutes to drag an MP3 off the file-server, web pages download at the speed of a dial-up modem and my beard doubles in length waiting for even a modest flash file to load.
    Have tried the following so far...
    - Speed is good on the ethernet cable, just not on the wifi.
    - Connection speed is good on the wifi (11Mbps) and signal strength is excellent.
    - All other laptops on the network are working fast
    - I have updated the drivers to the latest provided by intel, no change
    - I have applied all service packs and updates to XP (was a brand new box yesterday)
    - Disabling various modes on the driver make no difference
    - Switching off the QoS mode in the network panel doubled the trickle of data
    I see from earlier posts that I'm not the only one who has had this problem with the Intel 3945ABG chips, but I don't see a solution posted. Has anyone had success is solving this kind of problem.
    The data throughput is barely usable for internet access and quite inoperable for LAN filesharing or Skype.

    Sounds weird. If PCMCIA WLan card gives you good speed it means that there is nothing wrong with your Internet connection, just with built-in wlan card.
    You probably should use your warranty services or better yet to return it to the shop and get a new one straight away.
    In my country if something brakes within a few days after purchase you don't need to send it to repair under warranty because the shop usually agrees to replace it with new one if they have it in stock.
    There is one thing I think you better try: Take it to your friend who has wireless network or to the nearest free hot spot, connect to internet from there and see what speed you get.
    It could be, though longshot, that your router has compatibility issues with this specific built-in wlan card.
    For example I also have a slight compatibility issue between my d-link router and built-in intel wlan card, but it is about security protocols and not the speed.
    Overall it seems to me that this intel wlan card is not that good.

Maybe you are looking for