Low disk space (Boot Camp) - can I repartition my hard drive?

Hi there -
I am a MacBook user through and through. However, I partitioned my hard drive 3 years ago using Boot Camp to do some light Windows-only work. I only partitioned 8 GB to Windows, which wasn't a problem til now. I'm now trying to use some Windows-only software again, but am faced with a "low disk space" message. I cleaned up as much as I could with 8 GB, but it's still not enough. Can I re-partition the hard drive to more like 20 GB without losing any of the data and/or installed software (I don't have access to the install disks...)? I tried to install WinClone but I have OSX 10.5.8, and it said it only runs on 10.6 or 10.7. Can anyone offer advice on an option to re-partition with Boot Camp, without losing the installed software and files/data?
I have a MacBook running OS 10.5.8 with 2.16 GHz Intel Core 2 Duo and 2 GB 667 MHz DDR2 SDRAM (I know, it's old!!!)
Thanks

The correct answer to the question was given by The hatter so take notice please. I will help you gain knowlege ot CampTune by providing the url to the site. Happy sailing!
http://www.paragon-software.com/home/camptune/

Similar Messages

How can I repartition my hard drive?

I have a 2008 MacBook Pro, and last night, it suddenly restarted. When starting it again, it stayed on the grey screen with the Apple logo. Following a support page provided by Apple, I tried the following:
1. Start the Mac in safe mode
2. Reset the PRAM
To no avail. Then I restarted it, and held Command and R, and it went into disk utility. There, when Repairing my hard drive, Dis Utility told me to back-up the drive and repartition it.
I tried to back the disk up to a flash drive, but I got the error "The Source Could not be validated"
Then I proceeded to repartition the disk anyways, but I am confused on how to. I'm scared that if I erase the disk, Mac OSX will be gone, and I won't be able to use my computer.
I have two questions:
1. How can I backup my disk
2. How can I repartition it?

Recover your information before attempting a repartition: http://discussions.apple.com/docs/DOC-1689 There is always a risk of data loss when partitioning.

Can't open disk utility at startup, can't format new hard drive

My hard drive on my 2011 macbook pro recently went out, so I purchased a new one. I plugged it in internally and brought up disk utility in internet recovery, but it didn't recognize the drive. So I tried using an external hard drive reader, but now recovery mode can't be accessed at all, whether I press option or command r after startup, it still gives me the same gray folder with a question mark icon. Is my recovery mode damaged, and is that possible to fix?

You can use an external USB disk/flash drive which has Recovery (or a full OS - requires a 16GB disk space on a USB flash or a JHFS+ partition with the OSX) on it. Boot from that recovery USB drive. if Internet Recovery worked once, the MBP is already capable of repeating it. It requires an Ethernet or WiFi connection. If neither is available, or is spotty, Internet Recovery will not work. Can you try Internet recovery via Ethernet cable, if all your previous attempts have been via WiFi?
If the drive is not recognized when plugged into the internal SATA bus, either a cable is not plugged in properly (the replacement drive never showed up successfully as per the OP even once, or the drive is DoA). It should be tested externally. Pulling the drive out and putting it back is fairly easy in the 2011/2012 MBPs. The cable could have been damaged during the replacement. The non-drive end of SATA/IR Sensor cable on the main logic board could be loose or damaged.
If you have a external cable SATA-to-USB or SATA-to-FW (very unlikely), format the new drive using a different PC/MAC to make sure it is not DoA. What brand/model is this new drive? Is it an SSD? It may require a FW upgrade.
If there is a second MAC available, a Target Disk Mode boot (press T while powering up the mac with the new drive) may allow the second working mac to format the new drive via Disk Utility.

Is it possible to use Boot Camp to partition an external hard drive so there is a OSX partition and a Windows partiton? I want to use the external drive for backup only, NOT to load Windows and NOT to use as a boot drive.

I have partitioned the internal hard drive and am running Lion and Win7 Pro on my iMac i5 2.7GHz with 16GB RAM. Can I use Boot Camp to create a Windows partition on an OSX external hard drive to use for backing up both systems to the same HDD? I do NOT want to install OSX Lion or Windows 7 Professional on the external drive. I do NOT want to boot either system from the external drive. The 3TB external drive is for backup only.

Use NTFS for Windows and buy Paragon NTFS for OS X
You can also try Paragon HFS for Windows
As long as you are using for data and backups, you can leave the drive as GPT too.
I would recommend strongly to always have a 2nd bootable Mac OS drive, only need 30GB partition. System maintenance. Though LIon Recovery Mode finally makes it less but not totally unneeded.
And yes you can use Windows to create a partition.
Boot Camp is too broad. Do you want or mean BC Assistant? not needed but probably possible.
MBR has trouble with 3TB drives.

Copying Boot Camp Vista partition to new hard drive

This is OS X Lion using Boot Camp version 4.0.4 with Vista on a separate hard drive. I want to move it from an 80Gb drive to a 1Tb. Looking for the quick and cheap way of copying the bootcamp partition to the new drive because it's the same Mac Pro so only the drive size will be different. Google searches has me using two software to copy the Apple bootcamp and Winclone to copy Vista.
Isn't there a simpler way without purchasing software I will only use once? I'd rather just reinstall Vista and the other software manually than pay anything over $20 to do it.
Any advice is appreciated.

My apologies. I didn't make myself clear. I followed the proper procedure and got the error message. I tried the other formatting to see if it would help. All the same results.
I found a possible solution on another Apple thread. I am going to move the drive to have Vista installed moved to the first stall on my Mac Pro 1.1. It is claimed that this will bypass the issue of GP if do that. Then after installation I can switch them back.
I will post the results. I had no issue the first two times I did this since using Bootcamp when I first got this Mac Pro over 7 years ago.

Paragon NTFS 11 not recognising Boot Camp partition or NTFS external hard drives!

Hi guys,
So i had Paragon NTFS activated and working fine back when i was on Lion. Aftering upgrading to OS X mavericks, it was still working fine and recognising my boot camp drive, and any other NTFS capable ex.hard drive. My Paragon NTFS version back then was 10.1.xx
When paragon released their official v11.1.263, which supported OS X Mavericks officialy, i thought i would upgrade and benefit from that support. Ever since i upgrade, paragon is installed, activated, but not showing any NTFS drives in the menu. All my NTFS drives are therefore read only, and i cant transfer anything.
Any idea how to solve this issue? Thanks

Interesting. Comes with? you didn't have either before? Paragon is commercial and is now v. 10.0, they were the only one keeping updated and was supporting 10.7.4. I would not enable more than one.
For writing to HFS Paragon has theirs but probably give the nod to MacDrive there.
I never do an upgrade to a new OS over the old system, I backup (clone) and format the drive with the new OS and do the install so whatever is there I know is clean and also to keep from carrying around leftovers from years and systems past.
I would assme Paragon is limited. Try their site and knowledge base?
MacDrive
http://www.mediafour.com/updates/macdrive
Paragon HFS
http://www.paragon-software.com/home/hfs-windows/
Paragon NTFS
http://www.macupdate.com/app/mac/26288/ntfs-for-mac-os-x
http://www.paragon-software.com/home/ntfs-mac/

Disk Utility and DiskWarrior can't fix my hard drive. How?

For some strange reason, my startup external Firewire hard drive decided not to work.
Used my Mac internal startup disk and ran Disk Utility and I got this only error message:
*Error: The underlying task reported failure on exit*
Couldn't even mount it. So, I ran DiskWarrior 4.1 and the external FW HD showed up as an *Unknown Disk* and it stated +Directory cannot be rebuilt due to disk hardware failure (-36, 2268).+
Ran TechTool Pro 4.6.1 and the FW HD passed the Read Write test but failed on the Surface Scan with lots of bad blocks.
So, is this a gone case? Any other method or utility to revive the FW HD?

Hard drive failures are not that uncommon because hard drives still have moving parts. Since TechTool's surface scan came back with a lot of bad blocks and DiskWarrior noted that there was a hardware failure, my guess would be that the disc itself may be damaged or scratched.
There are companies that can recover data from damaged discs, but I would not put too much effort into reusing this particular drive.
Keith

I need to erase my hard drive. But the disks are grey when I go to Disk Utility. How can I erase the hard drive?

I need to erase my hard drive. But the drives are grey when I go to Disk Utility.

Restart the computer with the Command and R keys held down and use the Disk Utility from there. If you're going to sell or give away the computer, press Option as well.
(107083)

Have just made 2 attempts to download Elements 12. Each time at the end it gives a message saying Error extracting the product installer (Error 101). Please check for available disk space. I have an almost untouched hard drive. This is definitely NOT

Can anyone help me please

here are two different links. at least one must be different than the one you're currently trying.
Downloads available:
Suite: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 7 | 6 | 5
https://helpx.adobe.com/download-install.html
Download and installation help for Adobe links
https://helpx.adobe.com/download-install.htmlDownload and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
if you follow all 7 steps you can directly download a trial here: Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

Want to upgrade from Lion (Mac OS X 10,7) to Maverick (Mac OS X 10.9) with Boot Camp already installed on my hard drive?

Just get this iMac 27" Core i5 2,7GHz with a splitted Hard Drive.
Work with Lion and Window 7 and wish to rise up my hard drive section for
Mac to 10,9.5 without touching the Windows partition? Is it possible ?
Normand
<Email Edited By Host>

Yes. Back up both systems and upgrade Mac OS X normally; you probably won't need to use the backup immediately.
Note that unless you downloaded the full Mavericks installer before Yosemite came out, you won't be able to get it.
(126209)

Low disk space in DB Backup

Hi,
When i am scheduling "Full database offline backup" in DB13 the job fails due to low disk space. I can't delete anything from disk drive/backup root directory. There is not enough space in other drives also in OS level. How to solve the problem.
Regards,
Nabarun

hi narabun dada,
i think you have to use external drive or tape drive to resolve this issue.
regards;
ashish singh

TMS Low Disk Space Warning Threshold

Does anyone know what the threshold is for TMS to warn about Low Disk Space? I can't find it in the documentation.
Mine is giving me this warning now, and I'm wondering how much space I have to give it before it will be happy, likely by increasing the virtual disk size, so it would be nice to know my target, since that sort of thing requires some paperwork and I'd rather not have to do it twice.
Thanks.

Depending on the deployment size, it's recommended for the hard drive to be around 60-80GB per the TMS Install Guide. You could move your SQL database off the server, if it's hosted on the same server as TMS, as well as deleting old server logs. Here are some suggestions on how you can free up some disc space on the TMS server.
tms-low-disk-space
tms-diskspace-lower
free-space-tms-windows-server

Can´t install windows 8.1 because boot camp can't partition the disk. I´ve follow many tips but they did´t work

I can´t install windows 8.1 because boot camp can't partition the disk. I´ve follow many tips but they did´t work (backup, reinstall os, erase space, etc.)
Macbook pro retina
os x yosemite 10.10.2
Thanks

There are several possibilities.
1. You do not have contiguous free disk space.
2. BCA has failed, or you may have a Fusion drive which is causing problems.
3. You have incorrect permissions on the disk.
4. Can you boot in OS X Safe Mode - OS X: What is Safe Boot, Safe Mode? - Apple Support?

Does low disk space make my Macbook Pro act weird?

Hi! I have an early 2011 15" MBP with a 750gb hard disk space. Just the other day, while I was using photoshop with my laptop, the screen went off so I had to reset it. My laptop acted weird after: doing a screen split (the right part goes to the left and vice versa), one time it had weird pixels that were scattered all over, recently, a blue striped screen. All of this froze my laptop by the way. And all of this happened after a few minutes of usage. And I noticed if I use photoshop, it would only take a little amount of time before it would act weird again compared to when I don't. All the times caused me to reset my laptop by holding the power button.
Yesterday, it wouldn't boot past the gray screen after resetting about five times. But after it turned off by itself, I tried turning it on again and it booted normally. And I could use it normally again, but with extra care (using it beside an electric fan, checking the temperature with iStat pro).
I tried the extended Apple Hardware Test but it told me no trouble was found.
Another thing was, everytime my laptop froze and did the weird screen thingy, my laptop was hot.
I tried to use it again yesterday to just surf the web, and after some minutes it was still functioning. But I remember one time I was only surfing the web, it did the split screen and froze after almost an hour or so.
Also, my laptop heats up quickly compared before. And can stand being hot for a long time until now.
I haven't used any heavy applications besides photoshop to test my laptop's weird behavior by the way.
So I guess it's because of the laptop's heat. Because I can only use it for a very short time when using photoshop but I can use my laptop for a longer time when only surfing the web.
I also noticed that if I was forced to reset my laptop and turn it on again, it would boot longer than normal. But if I was able to shut it down properly and turn it on again, it would boot normally.
And, just a while ago, I remembered my laptop's disk space was only 14gb from 750gb (downloaded a lot of series since I bought my laptop). So maybe what's causing the heat was the low disk space. Just a guess. So is it possible that my laptop is behaving weird because of the low disk space?

The problem is back. But this time, it only happened when I used photoshop or played a 1080p video. I was using my laptop for almost 3 hours when i decided to use photoshop. It froze as soon as it started and made my screen display weird pixels. I restarted and tried to open photoshop again and this time, it froze. I did it the third time and after using PS for a minute, it did the split screen. After restarting yet again, I tried to play a 1080p video to just test my laptop. It froze as soon as VLC started. But when i only surf the web (which is the only thing I did before using PS), everything goes well. So I guess it really is the GPU and not the logic board or some other parts. I've decided to just have my laptop checked.

Qosmio X500 Folder migration utility and low disk space drice C

This may be a longish post as I try to explain my problem... please forgive.
I've had my X500 for just over three months now.
It took a little while before the folder migration utility woke up I didn't know it was there after I'd done a limited copy of folders across from my old Qosmio F20. After it had woken up and I'd been able to transfer folders/files across it cleared a lot of room from the 'tiny' - I feel, 60 Gb SSD C drive.
I keep getting a message coming up sometimes, when I boot up, that the folder migration utility has a setting for me. If I open the utility it shows no folders in the 'C' drive area and folders already transfered [from first using it] in the right hand side for the 'D' drive. Text in the bottom of the utility says something like "if you have done some manual transfers then it can't do anything"... something along those lines - sorry for not being clear on that.
I've recently installed some other programs and have endeavoured each time to do a custom install to the D drive to program files [x86] folder. However, drive C is now showing low disk space at 5.58 of 59.2 Gb.
Checking the folders copies??? I thought for the programs I installed I find lots of folders/files in those program folders so taking up a lot of space.
What is the best way to free up space on drive 'C' please?
Should I manually copy the data contained in the folders [not just a 'name' ... ie; AVID... folder but possibly also in the drive C Program files [x86] folder] to the same named folders on drive D?
If I did, would the programs work properly or would there be problems in the program being located?
When the utility first activated [by itself] I thought "Great... transfer of all my old data to the X500 will be easy" but it doesn't seem to be the case. I was expecting that any new programs installed would be automatically copied to drive D. I'm getting somewhat paranoid about the low disk space on drive C.
Help would be appreciated.

Thanks for coming forward PauPau.
Firstly, when I got the x500 I had lots of documents etc., I wanted to transfer over so I used the Win7 Transfer program to make the back up/transfer images. In doing the transfer across [after the copies of] the X500 gave an error warning that the C: drive had insufficient space to do the full copies. At this time/stage I was not aware that the X500 had a folder migration utility. What ever made it 'wake up' and make itself known I have no idea but I used it when it did. My first problem was probably in using the Win7 file transfer - for getting files/folders across from the old computer to the x500!
I ended up doing a factory reset about three times before this utility made it self known. I found NOTHING in ant documentation about the X500 about this utility and how to make use of it when I bought the laptop. Not sure if you are aware of the make up of the X500 having 2 hard drives; a 'C:' drive of 65Gb SSD and a SATA 'D:' drive of 650GB. If you do then my apologies if that comes over in any 'bad' way. The D: drive is NOT a partition of 1 installed hard drive as your reply would seem to suggest you are thinking.
The migration folder utility, when used first time, copied/transfered folders across - even program folders such as Program files [x86] - and left 'similar' named folders on the C: drive. At that time I then thought that any future installs of programs would be put in the D: drive. Only when watching the first time for a new program install did I see it going to the C: Program and Program files [x86] folders instead of those in the D: drive. I then had to uninstall and do a custom install to direct to the D: drive. However... some data appears that it can NOT be directed from the install disk to the D: drive and still goes to the C: drive - HENCE the issue I am having with the small amount of remaining free space on the C: drive.
I accept what you say in reply to my question about the best way to free up space but, based on as explained above, should I have to do a re-install of any program I try to run after being moved to the same named corresponding folder on the separate D: drive [if that is what I have to do] I think the install disk will still do an automatic install of these to the C: drive as at that stage there seems no way of stopping it. Although given the option in a custom install to change the 'drive' to install to such as the D: some data is still going to C: and I'll be in the same predicament that I am now.
If that's the case then maybe this is something that TOSHIBA should be looking in to solving if they are going to produce laptops with two hard drives - - - even if one [the C: drive] is of the SSD make to speed thing up.
I DO appreciate your input. MAybe I didn't explain properly first time... and maybe I haven't this time - in which case I apologies.
Are there no other X500 users with the same issue?
Thanks. I may just have to give it a go and transfer these data files/folders manually to the D: and see what happens if no one here can guide as to stop any hair pulling frustrations if it goes wrong.

Low disk space (Boot Camp) - can I repartition my hard drive?

Similar Messages

Maybe you are looking for