Low disk space never recovered after cleanup

Hi all,
We have a CPI 1.3 up and running but with this issue.
Cisco Prime Network Control System
Version : 1.3.0.20
/dev/mapper/smosvg-optvol 200G 162G 28G 86% /opt
I followed the procedure on cleaning up databases and files but It didn´t work. After doing that we started to get databases error on some navigation features.
Steps I followed
1.- Remove HA
2.- ncs stop
3.- ncs cleanup
4.- ncs start --> after that we started with other database´s errors.
once this I followed with a ncs reinitdb
1.- ncs stop
2.- ncs reinitdb
3.- ncs start
So, we are still having the same issue. 86% disk used, how we supose to cleanup the disk?
ade # pwd
/opt
ade # du -sh oracle/
128G oracle/
Any idea?

This is not due to a virus, or any other kind of malware.
For help solving the problem, see:
Where did my Disk Space go?

Similar Messages

Low Disk Space & Online Problem

Hi... need some help
first problem "Low Disk Space"
second problem after i free up some space, then i get Online all my free space is gone?
are they any virus or some thing that eat up my space...
Please help.
Thanks.

This is not due to a virus, or any other kind of malware.
For help solving the problem, see:
Where did my Disk Space go?

Premiere Elements reports low disk space error right at the end

Ok, so I wait for 5 hours for a 3 hour long video to get saved to my computer. It goes to 99% and then I get a low disk space error. After I clear up space, and click Ok, it starts all over again. Firstly, why doesn't PrE calculate/predict how much disk space I would need BEFORE starting to save, and secondly why does it at least not resume the saving process after I clear up disk space, instead it starts all over, with my 5 hours wasted?
Some serisous usability issues. Is it just me or do these things drive others crazy too?
Expected more from Adobe...

Unfortunately, as PrE uses a 2-Pass Encoding scheme (helpful to get the best quality within the same file size), it does not know exactly how much space will be used, until well into the second pass - the first is a survey of any motion in the Clips on the Timeline, and the second is the actual Encoding, and writing of a file.
Another consideration, regarding disk usage is whether one is Exporting/Sharing both Audio & Video. If one IS doing a Multiplexed file (with both an Audio and a Video Stream in one file), a Video-only file is written first, and then an Audio-only file, with a few "helper files" to be used in just a moment. Then, when that has completed, PrE reads those helper files, and creates the final, Multiplexed file. Last, the two separate Audio-only and Video-only files are Deleted. That takes some space, as at some point, one will have three large files, though two will be Deleted, along with the little helper files.
How much defragmented, free-space do you have?
What is your I/O setup, i.e. the number of physical HDD's, and how they are allocated?
Good luck,
Hunt

Blue sceen appeared after low disk space warning

Hi Everyone, just seen a message stating a low disk space on my Mac pro bought last November and tried plugging in an external hard drive to remove some pictures to free up some space but it seems that the computer did not have enough space left to start up and run the hard drive. I then tried to restart and ended up with a blue screen and have no knowledge now how to fix this problem. I phoned support but they say I have no technical support left but do have warranty and I would need to either try with the community here or take the unit to an apple store for an appointment. The store is an 1 and 1/2 from me and I really want o see if there is another fix that could allow me to start again then remove some files and then add external drive to remove more. I was blown away at the low amount of storage.....looked for the icloud option last night to upload there as i was told about this by a UK client of mine and now see it is not up and running. Any advice or help by the communtiy would be greatly appreciated as this is my business and travelling laptop. Cheers, Dean <")))><

Hi Dean,
You may be able to access it via FireWire Target Disk Mode: http://docs.info.apple.com/article.html?artnum=58583
If so, move and delete enough so you have at least 15% free space on the MBP's HD. After that, run Repair Disk:
First check the S.M.A.R.T. status on your HD: Boot from install disc (insert disc > restart > immediately hold down the c key and keep holding it until you see “Preparing Installation”) > at first screen select the language and click Continue > click on theUtilities Menu in the menu bar > select Disk Utility > select your HD in the panel on the left side (the name of the HD’s manufacturer and the model number, usually the top item in the list) > look at the bottom of the main window next to S.M.A.R.T. status and see if it says “Verified” (good) or something more ominous like “Failing.”
If S.M.A.R.T. status is "Verified," run Repair Disk > click Repair Disk at bottom of main window. Run this at least twice, and keep running it until it says “appears ok” twice in a row. If that doesn’t happen, you may need a stronger utility (such as DriveGenius, TechToolPro, DiskWarrior) or if the directory is damaged beyond repair, you may need to reinstall the OS, or you may have a damaged HD (repair utilities can only repair the directory structure, not the HD itself). When this is finished, quit Disk Utility, quit the installer, and restart. Once booted normally, go to Applications > Utilities > Disk Utility and run Repair Permissions.

"low disk space hp_tools" after installing HP external drive

I have this message displayed "low disk space hp_tools" after installing HP external drive with simple save. A new drive was created on my internal hard drive and apparently the allotted space is not enough. How do I get rid of the partition and the error message?

Install WinDirStat from below link and see whats consuming more space in E:\ drive and post results here with a screenshot
http://windirstat.info/wds_current_setup.exe
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

I keep getting a (false) notification from HP Support Assistant: low disk space on C drive?

Hi, this morning upon starting up my computer the magnifying glass was hovering over the HP Support Assistant icon and usually that means it is checking for updates etc... but I noticed it turned into a yellow exclamation mark so I clicked on it and opened up HP Support Assistant. The exclamation mark was now in the "updates and tune-ups" and said there were "recommended messages available." Upon clicking this the exclamation is now on the HP messages tab and upon clicking that I am taken to a notification that says: "Low Disk Space on Primary Drive C:" So I click on it to find out more information and it says that I am running out of free disk space on my C drive and that I need to perform a disk cleanup etc...
I went to My Computer to see just how in jeopardy I was in of running out of space on my C drive. To my amazement it stated that I still had 1.27 TB of 1.35 TB available and have only used 6% of my space...
I tried emptying my recycle bin, clearing my cache, doing an actual disk cleanup, and restarting to no avail, the magnifying glass comes back after restart and the notification returns telling me that I am low on disk space in the C drive...
I have come to the conclusion that this must be a false notification but I have no idea how to get rid of it...it isn't a huge issue as it doesn't impair my usage on the computer, however, it is kind of annoying to keep seeing this notification...
Is there any way to get rid of this notification?

Hello @blackrosevain,
I understand that you are getting the 'Low Disc Space' error message on your HP Pavilion Elite h8-1010t Desktop PC running Windows 7. I am providing you with an HP Support document: Error: Low Disk Space. You are running out of disk space on Recovery (Windows 7), which addresses the error you are getting and has the steps needed to fix it.
I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Error: low disk space HP(C:)

My computer knowledge is below average!!! My 'puter reads Error: low disk space HP(C. I have cleaned and defragmented several hundred times but to no enjoyment. I have also uninstalled whatever I believed to be unneccessary for me to be using on this 'puter. The memory available is reading 4% at the moment and I am feeling quite frustrated and at a loss. IS SOMEONE OUT THERE THAT CAN HELP THIS COMPLETE NOVICE??
This question was solved.
View Solution.

I am an elder novice and also had this problem.I did a disk clean and was amazed when it revealed 8.4gb of stuff in the recycle bin which i am always emptying via c cleaner.After running the cleanup and doing a defrag i ended up with 22.4gb of space.I ran c cleaner and was surprised that it found 18000kb still in the recycle bin.Non of this makes real sense to me but at least i have a lot more space.Hope it helps you.

Low Disk Space in WSUS

Hello,
The size of content folder in my WSUS upstream Server is 170GB, i am installing updates in one language only and 46 products. its showing low disk space now. i used server cleaning wizard but it cleared only 2GB. I thing somthing is going wrong there. Help
me to come out from this problem.

Thanks for your reply and the link. After my disk became filled to capacity by WSUS updates, I couldn't use WSUS's "Server Cleanup Wizard". Then I found this thread and began to decline the superceded and 100% installed updates. I
got thru maybe 200 updates. Now I can't even decline any more updates without getting a screen that pops up saying Error: Database Error, asking to reset the node. This is the same screen that I got when I tried to use the Server Cleanup Wizard.
Any advice?
Here are the clipboard error contents:
When Trying to Use Server Cleanup Wizard:
The WSUS administration console was unable to connect to the WSUS Server Database.
Verify that SQL server is running on the WSUS Server. If the problem persists, try restarting SQL.
System.Data.SqlClient.SqlException -- The transaction log for database 'SUSDB' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
Source
.Net SqlClient Data Provider
Stack Trace:
at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)
at Microsoft.UpdateServices.UI.SnapIn.Wizards.ServerCleanup.ServerCleanupWizard.OnCleanupComplete(Object sender, PerformCleanupCompletedEventArgs e)
When Declining Superceded Updates:
The WSUS administration console was unable to connect to the WSUS Server Database.
Verify that SQL server is running on the WSUS Server. If the problem persists, try restarting SQL.
System.Data.SqlClient.SqlException -- Could not allocate space for object 'dbo.tbDeadDeployment'.'PK__tbDeadDeployment__4AB81AF0' in database 'SUSDB' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded
files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.
Change:Deleted deployment(Install) of Security Update for Windows XP (KB835732) by IH-DHCP1TEST\Administrator UpdateID:ED095ADB-093B-4755-8EA4-F84A8AB40C11 Revision Number:104 TargetGroup:All Computers
Source
.Net SqlClient Data Provider
Stack Trace:
at Microsoft.UpdateServices.UI.SnapIn.Dialogs.ProgressDialog.OnCompleted(Object sender, AsyncCompletedEventArgs e)

Low disk space in recovery disk (d) drive in window 8.1

I continue to receive the subject warning. I have never added any files to D, but I have 32.3 MB free of 25.5 GB. I have Administrator privilrges but am unable to view the files on D. When I click on recovery, I get an HP warning.

Hi @pjd10
I grasp that you are a low disk space error on recovery D. I regret that you are having that difficulty.
Here is a link to HP PCs - Error: Low Disk Space. You are running out of disk space on Recovery (Windows 8) that should guide you to resolving this issue.
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Does low disk space make my Macbook Pro act weird?

Hi! I have an early 2011 15" MBP with a 750gb hard disk space. Just the other day, while I was using photoshop with my laptop, the screen went off so I had to reset it. My laptop acted weird after: doing a screen split (the right part goes to the left and vice versa), one time it had weird pixels that were scattered all over, recently, a blue striped screen. All of this froze my laptop by the way. And all of this happened after a few minutes of usage. And I noticed if I use photoshop, it would only take a little amount of time before it would act weird again compared to when I don't. All the times caused me to reset my laptop by holding the power button.
Yesterday, it wouldn't boot past the gray screen after resetting about five times. But after it turned off by itself, I tried turning it on again and it booted normally. And I could use it normally again, but with extra care (using it beside an electric fan, checking the temperature with iStat pro).
I tried the extended Apple Hardware Test but it told me no trouble was found.
Another thing was, everytime my laptop froze and did the weird screen thingy, my laptop was hot.
I tried to use it again yesterday to just surf the web, and after some minutes it was still functioning. But I remember one time I was only surfing the web, it did the split screen and froze after almost an hour or so.
Also, my laptop heats up quickly compared before. And can stand being hot for a long time until now.
I haven't used any heavy applications besides photoshop to test my laptop's weird behavior by the way.
So I guess it's because of the laptop's heat. Because I can only use it for a very short time when using photoshop but I can use my laptop for a longer time when only surfing the web.
I also noticed that if I was forced to reset my laptop and turn it on again, it would boot longer than normal. But if I was able to shut it down properly and turn it on again, it would boot normally.
And, just a while ago, I remembered my laptop's disk space was only 14gb from 750gb (downloaded a lot of series since I bought my laptop). So maybe what's causing the heat was the low disk space. Just a guess. So is it possible that my laptop is behaving weird because of the low disk space?

The problem is back. But this time, it only happened when I used photoshop or played a 1080p video. I was using my laptop for almost 3 hours when i decided to use photoshop. It froze as soon as it started and made my screen display weird pixels. I restarted and tried to open photoshop again and this time, it froze. I did it the third time and after using PS for a minute, it did the split screen. After restarting yet again, I tried to play a 1080p video to just test my laptop. It froze as soon as VLC started. But when i only surf the web (which is the only thing I did before using PS), everything goes well. So I guess it really is the GPU and not the logic board or some other parts. I've decided to just have my laptop checked.

Finder fails to open when starting up macbook pro due to low disk space (possibly)

Dear forum,
I have a Macbook Pro (13") running snow leopard and have a partitioned hard drive (half OS X and half Windows 7). This morning I was using the Mac side and was running low on disk space (very low) so I was moving desktop files into folders to free up some space. I restarted the computer to see what the free space was but the computer stopped/froze at the desktop image (no folders or dock appeared. I restarted the computer many times but the finder never opens and all I see is the desktop wallpaper. I donnected usb drives and put in dvds but the finder never appears so I cn do nothing but shut down and start up.
I ran Disk Utility but it found no problems with the disk. I do not have a backup of the important file forlders on my drive and due to low disk space I am worried to reinstall and archive the OS since there may not be enough disk space to archive (only about 220 mb free on the apple side when I am in windows using bootcamp).
Does anyone know what happeded to my machine? Is there such low disk space that finder had an issue? I have started on such low memory before.
What does Archive actually do when reinstalling OS X? Does it make a copy of the HD files and folders or does it simply reinstall the operating system piece by piece while protecting the files and folders that I wish to save?
Thanks for all your help and sorry for the length of the writing (I wanted you to understand all before replying).

Solved
By chance I got itunes to pop up (running hands over keys blindly) and with it the apple menu icon so I had access to my recently used items and so I could delete images from iphoto and thus bring the free disk space up above zero and then the dock/folders and finder came back....I have just backed up my important files......feeling better now
Any advice on how to more quickly handle this type of issue next time?
Thanks.

Qosmio X500 Folder migration utility and low disk space drice C

This may be a longish post as I try to explain my problem... please forgive.
I've had my X500 for just over three months now.
It took a little while before the folder migration utility woke up I didn't know it was there after I'd done a limited copy of folders across from my old Qosmio F20. After it had woken up and I'd been able to transfer folders/files across it cleared a lot of room from the 'tiny' - I feel, 60 Gb SSD C drive.
I keep getting a message coming up sometimes, when I boot up, that the folder migration utility has a setting for me. If I open the utility it shows no folders in the 'C' drive area and folders already transfered [from first using it] in the right hand side for the 'D' drive. Text in the bottom of the utility says something like "if you have done some manual transfers then it can't do anything"... something along those lines - sorry for not being clear on that.
I've recently installed some other programs and have endeavoured each time to do a custom install to the D drive to program files [x86] folder. However, drive C is now showing low disk space at 5.58 of 59.2 Gb.
Checking the folders copies??? I thought for the programs I installed I find lots of folders/files in those program folders so taking up a lot of space.
What is the best way to free up space on drive 'C' please?
Should I manually copy the data contained in the folders [not just a 'name' ... ie; AVID... folder but possibly also in the drive C Program files [x86] folder] to the same named folders on drive D?
If I did, would the programs work properly or would there be problems in the program being located?
When the utility first activated [by itself] I thought "Great... transfer of all my old data to the X500 will be easy" but it doesn't seem to be the case. I was expecting that any new programs installed would be automatically copied to drive D. I'm getting somewhat paranoid about the low disk space on drive C.
Help would be appreciated.

Thanks for coming forward PauPau.
Firstly, when I got the x500 I had lots of documents etc., I wanted to transfer over so I used the Win7 Transfer program to make the back up/transfer images. In doing the transfer across [after the copies of] the X500 gave an error warning that the C: drive had insufficient space to do the full copies. At this time/stage I was not aware that the X500 had a folder migration utility. What ever made it 'wake up' and make itself known I have no idea but I used it when it did. My first problem was probably in using the Win7 file transfer - for getting files/folders across from the old computer to the x500!
I ended up doing a factory reset about three times before this utility made it self known. I found NOTHING in ant documentation about the X500 about this utility and how to make use of it when I bought the laptop. Not sure if you are aware of the make up of the X500 having 2 hard drives; a 'C:' drive of 65Gb SSD and a SATA 'D:' drive of 650GB. If you do then my apologies if that comes over in any 'bad' way. The D: drive is NOT a partition of 1 installed hard drive as your reply would seem to suggest you are thinking.
The migration folder utility, when used first time, copied/transfered folders across - even program folders such as Program files [x86] - and left 'similar' named folders on the C: drive. At that time I then thought that any future installs of programs would be put in the D: drive. Only when watching the first time for a new program install did I see it going to the C: Program and Program files [x86] folders instead of those in the D: drive. I then had to uninstall and do a custom install to direct to the D: drive. However... some data appears that it can NOT be directed from the install disk to the D: drive and still goes to the C: drive - HENCE the issue I am having with the small amount of remaining free space on the C: drive.
I accept what you say in reply to my question about the best way to free up space but, based on as explained above, should I have to do a re-install of any program I try to run after being moved to the same named corresponding folder on the separate D: drive [if that is what I have to do] I think the install disk will still do an automatic install of these to the C: drive as at that stage there seems no way of stopping it. Although given the option in a custom install to change the 'drive' to install to such as the D: some data is still going to C: and I'll be in the same predicament that I am now.
If that's the case then maybe this is something that TOSHIBA should be looking in to solving if they are going to produce laptops with two hard drives - - - even if one [the C: drive] is of the SSD make to speed thing up.
I DO appreciate your input. MAybe I didn't explain properly first time... and maybe I haven't this time - in which case I apologies.
Are there no other X500 users with the same issue?
Thanks. I may just have to give it a go and transfer these data files/folders manually to the D: and see what happens if no one here can guide as to stop any hair pulling frustrations if it goes wrong.

HP Support Assistant indicates low disk space on primary station C:

Hi,
My system is a HP Pavilion 500-130ed with Windows 8.1, 64 bits. I'm running version 7.4.45.4 of the HP Support Assistant, currently the most recent version according to same.
I get the message 'low disk space on primary station C:' (my translation, in Dutch it literally says 'Weinig schijfruimte op primair station C:').
Now I know Windows is resource hungry, but I've 250 GB available on C:! What's happening and how can I make it disappear?
Cheers,
Sando

Uninstall any programs you are no longer using.
Perform a Disk Cleanup as advised via this site:
http://windows.microsoft.com/en-us/windows/delete-files-using-disk-cleanup#delete-files-using-disk-c...
Download and run CCleaner Free from this site and perform a cleanup and registry cleanup:
https://www.piriform.com/ccleaner/download
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Need help with Low disk space issue and blue screen

Hi Everyone, just seen a message stating a low disk space on my Mac pro bought last November and tried plugging in an external hard drive to remove some pictures to free up some space but it seems that the computer did not have enough space left to start up and run the hard drive. I then tried to restart and ended up with a blue screen and have no knowledge now how to fix this problem. I phoned support but they say I have no technical support left but do have warranty and I would need to either try with the community here or take the unit to an apple store for an appointment. The store is an 1 and 1/2 from me and I really want o see if there is another fix that could allow me to start again then remove some files and then add external drive to remove more. I was blown away at the low amount of storage.....looked for the icloud option last night to upload there as i was told about this by a UK client of mine and now see it is not up and running. Any advice or help by the communtiy would be greatly appreciated as this is my business and travelling laptop. Cheers, Dean <")))><

Great to hear Dean, thanks!
Further notes: OSX needs about 15% or 10GB Free space minimum, but will run mucch faster/safer with 30-40% or 50GB of Free Space... Free Space is no longer ours to use.
Another tool to help clear up assorted things is Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.

Could Very Low Disk Space Cause problems?

Hi, my 600 GB Hard Drive only had around 5 GB of space left . I purchased a new 1 TB Hard Drive in order to delete media so that I could gain the space back. I've since gained back 200 GB of Space but Could very low disk space cause issues? What kind of issues could occur? Thanks
Message was edited by: Stuart Lawrence

There are any number of reasons for occasional beachballs to appear. They will appear when some programs are involved in heavy disk I/O which tends to be processor dependent and causes the program to suspend all other activity until the disk activity has completed. This is more often the case when writing to the disk. Beachballs may also appear if the OS has to use disk I/O and is slowed down by an over-filled and/or fragmented hard drive. The fuller a drive gets the greater the likelihood that fragmentation will become a more noticeable problem. Beachballs can appear if you are low on physical memory so applications must resort to disk-based virtual memory which is considerably slower and tends to cause the computer to become slow or unresponsive for a period of time. It can also cause disk-thrashing. Beachballs can occur if the disk has become corrupted causing applications to have difficulty reading from or writing to the disk.
It is possible to repair a drive's directory, and it's even possible to identify corrupted files, but it's not possible to repair corrupted files nor repair a corrupted drive. If a drive develops corrupted files either the files will need to be replaced or deleted. If a drive develops soft sector errors these can be repaired by erasing the drive (reformatting.) If a drive develops hard sector errors these may or may not be repairable, but if they are repairable it requires zeroing the data during a disk formatting operation. If the disk directory becomes corrupted that can be repaired using Disk Utility or one of the various third-party utilities such as Disk Warrior. Disk Utility can repair many but not all directory corruption problems. What DU cannot fix Disk Warrior usually can.
You can start repairing a drive as follows;
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
This applies to your startup volume. No need to repair permissions on any but a startup volume.

Low disk space never recovered after cleanup

Similar Messages

Maybe you are looking for