"Low Disk Space - You're running very low on Disk Space C:"

I'm running low on resources in my C: partition, where OS: MS Windows 7 Professional (32 bit) resides, in my ThinkPad T410 (2516-CTO). I should be cleaning it. I've already run CCleaner, and want to avoid the partition expansion operation. I have 50 GB there, and my 2nd and only other D: partition for Data of 400 GB is almost full also.
Until I get a reasonable portable HDD, to handle this risky issue, any idea if it is safe to delete at least 4 huge 800 MB sessions here c:\Program Files\Lenovo\System Update\session\ ? I imagine these had to do with old updates that won't be needed anymore.
Any other better suggestions are also welcome.
Thanks in advance, C
PS: Couldn't find anything related here.

Just to add that I found the answer by my own here in http://forum.notebookreview.com/
Answer:
One must keep system and temp directories, QuestResponse.xml and updates.ser files all from the Session Folder within the lenovo-system-update-session area, or else System Update won't start. Then, one can safely delete all other directories.
1st urgent issue, solved.
Nevertheless, I should stil find out a fix to the not minor 2nd issue, the full Backup Lenovo Recovery Partition Q: from my HDD (6,76 GB, with only 364 MB free available) where I should either replace the 1st and only backup I made and left there, or blow up the whole partitioned HDD and start all over from scratch, which I'm trying to avoid.
I already know that the other obvious solution would be to get a huge Portable HDD. Though I have almost 70 GB left in one of those, I must find a way to move that space required from Q: over there, and make a backup too.

Similar Messages

How do I clean my mid 2007 iMac? The disk space is running VERY low and I would love an idea. I make videos and upload them to youtube and I need space to do that. Thanks for your time!

How do I clean my mid 2007 iMac?
The disk space is running VERY low and I would love an idea. I make videos and upload them to youtube and I need space to do that. Thanks for your time!
If you have an idea please respond!

You should never, EVER let a conputer hard drive get completely full, EVER!
With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
If it does, it's time for some hard drive housecleaning.
Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
Have you emptied your iMac's Trash icon in the Dock?
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Look though other Apple Mail folders like the junk mail and delete the mail that is in there. Look through your sent items folders and see there is any mail in there that can be deieted.
Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
Other things you can do to gain space.
Once you have around 15 GBs regained, do a search, download and install OmniDisk Sweeper.
This app will help you locate files that you can move/archive and/or delete from your system.
STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
Good Luck!

Macbook warning "you're running low on disk space"

Hello, my problem is when I try to open a game that I download from the app store, like "the mystery portal" appears a message that said "you're running low on disk space" the problem is that I have 668 GB free on my disk. And I recovered my mac two months ago. I hope you can help me, thank you

Launch Disk Utility (Applications --> Utilities --> Disk Utility)
1. Select your Macintosh HD from the left pane --> Verify Disk
(If Problems, Select Repair)
2. Select your Macintosh HD from the left pane --> Verify Permissions
(If Problems, Select Repair)

I play virtual city.. Now I get a message: Warning you're running low on disk space

i play virtual city playground. now i get a message: Warning you're running low space

Launch Disk Utility (Applications --> Utilities --> Disk Utility)
1. Select your Macintosh HD from the left pane --> Verify Disk
(If Problems, Select Repair)
2. Select your Macintosh HD from the left pane --> Verify Permissions
(If Problems, Select Repair)

HELP!! Everytime I go on something on my iPad it says " you are running out of disk space delete some files to continue" please help me

Hi can someone help me everytime I want to go on a game on the iPad 2 it says "you are running out of disk space delete some files to continue " and I don't understand it caus the iPad hasn't got a disk space and it's making everything on my iPad very slow please can anyone help me and tell me what I need to do? Thanks

How much space is your Other using? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
 Cheers, Tom

You are running out of disk space on Local Disk (C:)

I am getting this error message "You are running out of disk space on Local Disk (C To free space on this drive by deleting old or unnecessary file" but I have 600 GB free out of 671GB on my C drive.
This question was solved.
View Solution.

rdtetrick wrote:
I am getting this error message "You are running out of disk space on Local Disk (C To free space on this drive by deleting old or unnecessary file" but I have 600 GB free out of 671GB on my C drive.
That means that the disk is almost full. Unless you free up some space soon, your operating system will begin to behave strangely and eventually will no longer boot into Windows.
Windows operating system uses part of the capacity of the hard disk for virtual memory. A good rule of thumb is to never come to within 15-20% of the hard disk's capacity.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Iphone: You are running out of disk space

I have 7.3 Gb free disk space but sometimes the iphone shows error message
" Warning: You are running out of disk space. Please delete some photos or videos."
any idea ?

If you have 7.3 GB of available free space on your iPhone, this indicates you have not transferred any data from your computer to your iPhone except for maybe contact information, etc.
Since you have no data to speak of available on your iPhone, the standard troubleshooting steps in order are power the iPhone off/on, Reset, Restore and if no change after any or all, call AppleCare or make an appointment at a local Apple Store if there is one nearby.

My MAC is running very slow and i am a complete novice and don't know what to do. i have had my Mac since 2008 and its probably in a mess. if you can help i would be grateful. EtreCheck version: 1.9.15 (52) Report generated 8 September 2014 09:09:26

My MAC runs very slow. Rainbow wheel every time i try to go somewhere. Im a complete MAC novice. Only really use it for iTunes and email. the odd document here and there. The odd spreadsheet. Was brought up on a PC. I would imagine my system is in mess. I think i downloaded that Mackeeper which i have just discovered was not a good idea. I found a thread about EtreCheck and it suggested i posted the report of my machine which i have done.I only have 2GB of space. Not sure how much i have left. My wife keeps putting photos on here like they are going out of fashion. Bought the machine in 2008 because everybody said you have a MAC. I've never really got to grips with it but at least it worked. Now it does not run very well at all. That spinning wheel is driving me mad. HELP please, never ever used a forum light this either so please go gentle on me. Cheers Paul
EtreCheck version: 1.9.15 (52)
Report generated 8 September 2014 09:09:26 BST
Hardware Information: ?
iMac (20-inch, Early 2008) (Verified)
iMac - model: iMac8,1
1 2.66 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information: ?
ATI Radeon HD 2600 Pro - VRAM: 256 MB
iMac 1680 x 1050
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:31:45
Disk Information: ?
Hitachi HDP725032GLA380 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (117.84 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information: ?
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Bose Corporation Bose USB Audio
Apple Computer, Inc. IR Receiver
Gatekeeper: ?
Mac App Store and identified developers
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
[loaded] net.sourceforge.MonolingualHelper.plist Support
Launch Agents: ?
[running] com.trusteer.rapport.rapportd.plist Support
User Login Items: ?
iTunesHelper
Internet Plug-ins: ?
Google Earth Web Plug-in: Version: 5.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
AmazonMP3DownloaderPlugin101749: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
eMusicRemote: Version: (null) Support
eMusic: Version: Unknown
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Flip4Mac WMV Support
Trusteer Endpoint Protection Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
      2% iTunes
      2% WindowServer
      0% coreaudiod
      0% fontd
      0% rapportd
Top Processes by Memory: ?
178 MB Finder
133 MB com.apple.WebKit.WebContent
109 MB iTunes
92 MB Safari
63 MB com.apple.quicklook.satellite
Virtual Memory Information: ?
24 MB Free RAM
821 MB Active RAM
807 MB Inactive RAM
291 MB Wired RAM
338 MB Page-ins
680 KB Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

My MacBook Pro is running very slow. Can you help me, please?

Problem description:
My MacBook Pro is running very slow lately. Can you have a look at this and offer feedback for me. Thanks.
EtreCheck version: 2.1.5 (108)
Report generated December 30, 2014 at 8:08:29 AM EST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (15-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2 GHz Intel Core i7 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
AMD Radeon HD 6490M - VRAM: 256 MB
Color LCD 1440 x 900
VX2450 SERIES 1920 x 1080 @ 60 Hz
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 18:10:34
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.25 GB (63.27 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R   UJ-898
USB Information: ℹ️
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.seagate.driver.PowSecDriverCore (5.1.1) [Support]
[not loaded] com.wdc.driver.1394HP (1.0.9) [Support]
[not loaded] com.wdc.driver.USBHP (1.0.11) [Support]
[not loaded] jp.co.panasonic.driver.p2drivefamily (2.4.0 - SDK 10.6) [Support]
/System/Library/Extensions/P2DriveFamilyDriver.kext/Contents/PlugIns
[not loaded] jp.co.panasonic.driver.PCD35Device (1.2.0 - SDK 10.6) [Support]
[not loaded] jp.panasonic.iokit.P2FireWireSBP2 (4.2.0 - SDK 10.6) [Support]
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) [Support]
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) [Support]
[not loaded] com.seagate.driver.SeagateDriveIcons (5.1.1) [Support]
Startup Items: ℹ️
Jaksta: Path: /Library/StartupItems/Jaksta
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.adobe.CS5ServiceManager.plist [Support]
[invalid?] com.oracle.java.Java-Updater.plist [Support]
[running] com.seagate.SeagateStorageGauge.plist [Support]
[loaded] org.glimmerblocker.updater.plist [Support]
Launch Daemons: ℹ️
[running] com.backblaze.bzserv.plist [Support]
[loaded] com.bombich.ccc.plist [Support]
[running] com.memeo.Memeod.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[invalid?] com.oracle.java.Helper-Tool.plist [Support]
[invalid?] com.starfield.backupservice.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.adobe.ARM.[...].plist [Support]
[running] com.backblaze.bzbmenu.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
User Login Items: ℹ️
AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
Skype ApplicationHidden (/Applications/Skype.app)
Dropbox Application (/Applications/Dropbox.app)
RealPlayer Downloader Agent Application (/Users/[redacted]/Library/Application Support/RealNetworks/RealPlayer Downloader Agent.app)
MemeoAgent Application (/Library/Application Support/Memeo/Memeo Backup/Agents/MemeoAgent.app)
ConnectService Application (/Library/Application Support/ArcSoft/Connect Service/ConnectService.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.4-10.5: Version: 10.3.183.10 [Support]
Default Browser: Version: 537 - SDK 10.9
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 10.3.183.10 [Support]
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Support]
Flash Player: Version: 10.3.183.10 Mismatch! Adobe recommends 16.0.0.235
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
EPPEX Plugin: Version: 4.1.0.0 [Support]
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
User internet Plug-ins: ℹ️
WbeTools64_14: Version: 1.0.16.16 © 2010 Starfield Technologies, Inc. [Support]
Picasa: Version: 1.0 - SDK 10.6 [Support]
fileEditTool64_15: Version: 1.0.24.36 © 2011 [Support]
RealPlayer Plugin: Version: Unknown [Support]
Safari Extensions: ℹ️
iSkyDeluxe [Installed]
iTube Studio [Installed]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Backblaze Backup [Support]
Flash Player [Support]
GlimmerBlocker [Support]
Time Machine: ℹ️
Auto backup: YES
Destinations:
WD - Time Machine Bkup [Local]
Total size: 1.00 TB
Total number of backups: 33
Oldest backup: 2013-06-19 12:42:52 +0000
Last backup: 2014-12-26 20:37:43 +0000
Size of backup disk: Excellent
Backup size 1.00 TB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
      4% WindowServer
      3% bztransmit
      1% mds_stores
      0% Google Chrome
      0% RealPlayer Downloader Agent
Top Processes by Memory: ℹ️
125 MB Google Chrome
103 MB Finder
94 MB Google Chrome Helper
69 MB Mail
60 MB bztransmit
Virtual Memory Information: ℹ️
29 MB Free RAM
967 MB Active RAM
947 MB Inactive RAM
1.13 GB Wired RAM
3.60 GB Page-ins
200 MB Page-outs
Diagnostics Information: ℹ️
Dec 29, 2014, 01:58:39 PM Self test - passed
Dec 27, 2014, 03:22:25 PM /Users/[redacted]/Library/Logs/DiagnosticReports/AirPort Utility_2014-12-27-152225_[redacted].crash

You don't need ANY of this external drive software, you should uninstall them.
/System/Library/Extensions
[not loaded] com.seagate.driver.PowSecDriverCore (5.1.1) [Support]
[not loaded] com.wdc.driver.1394HP (1.0.9) [Support]
[not loaded] com.wdc.driver.USBHP (1.0.11) [Support]
[not loaded] jp.co.panasonic.driver.p2drivefamily (2.4.0 - SDK 10.6) [Support]
Thats a start. Why are you using Chrome? Of the three main browsers Chrome is probably the worst. Try Safari or Firefox. I'm not familiar with GlimmerBlocker or BackBlaze, you might try disabling them to see if things improve. I don't see any other software related issues.
Edit: FlashPlayer is out of date. Update that by entering www.adobe.com into your browsers address bar and follow the links ro FP. Never click on a link to update software.....too many redirects to tainted installers.

My MacBook Pro started running very slow. I did disk utility/repair

My MacBook Pro started running very slow. I did disk utility/repair and it helped but still very slow. Repair gave me this message, "SUID file 'System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent has been modified and will not be repaired." Any suggestions on this message and/or what else I can do to get my computer back to the way it used to run? Thank you!

It says 199.15 GB free of 499.25 GB. Can I remove the Remote Management program to solve the other unrepairable problem?

My iMac 8,1 (early 2008) is running very slow. I continually get the spinning color wheel. The free space dropped from 133. GB to 87.86 GB in about 2 days. System memory is 2.00 GB with 1.25 GB free. kernel_task root 1.1 63 205.3 MB intel.

My Mac is running very slowly. After reading other posts I have attempted to gather more info for an easier more accurate response but not being computer savy am unsure what is helpful/necessary. The utilized space is 231.6 GB with 88.13 GB free. Memory is 2.00 GB w/ 1.25 GB free and 771.8 MB used. The kernel_task root 1.1 63 205.3 MB intel. What can I do to increase the speed and stop the spinning wheel? Thanks for all your help.

See:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
Macintosh OS X Routine Maintenance,
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths, and
Myths of required versus not required maintenance for Mac OS X for information.

Can't access one user on mac....one user is OK although it runs very slow..lots of beach ball action...tried using shift to access user and no use...I ran a disk check from good user and it checks out OK...what do I need to do

I cannot access one of two users on my mac..i have tried using the shift key but no luck...the one user that I can access runs very slowly, I get a lot of beach balls from **** action...also the message "unapproved caller" keeps popping up...I ran disk check from good user and it shows OK...Disk usage shows ~267gb used out of 360gb disk

Spinning Beach Ball
Spinning Beach ball (2)
Spinning Beach ball (3)
Spinning Beach ball (4)

Oracle 10gr2 Master/detail form running very slow when you navigate to the detail record.

Hi All, I have a master detail form, running in webserver, when I navigate to the detail block, the form start buffering and buttering for about 2 min. There is a trigger when-new-record instance that is firing when you navigate to a new record : The select part of this stament is taken a long time to execute. I modified this in toad and what used to take 25 seconds to run is taken less than a second now, but the slowness still persists in the form.
for rec in (select wrrh_col
                  wpbh_col_lvd,
                   wpbh_col_doc_no
      from wh_col,
           wkpl_col,
           wh_col
     where wrrh_col_no = :block.wreh_wrrh_col_no
       and wrrh_col_no = wreh_wrrh_col_no
         and wrrh_col_no = wpbh_col_no
       and wrrh_col_proj    = wpbh_col_proj
       and wrrh_proj_no     = wpbh_proj_no) loop
   if fun_name(rec.wpbh_col_lvd) = 'Y' then
    do something,
   end if;
end loop;
The select staement that used to run for 23 seconds is running in less than one second, but the form is still running very slow when I navigate to the detail record.
Please advise.
Thanks.

Thanks Andrea for your prompt response, the problem is the select statement and like I stated, I tuned the select statement in toad and what normally takes 23 secs is taking less than 1 sec to run. If I comment out the call to the function, it is still slow. The select stament will returned null and it will still be slow. When I comment out the for loop, it run very fast. I dont know what else to do than tuned the select statement.

Adobe Premiere Elements 11 running very slowly

I have been working on my first project on Premier Elements 11. After rendering, I now see an alert when the project first opens "Premiere Elements is running very low on system memory. Save the project and proceed with caution. The project also becomes non responsive and I have to shut it down. Any fixes or ideas?

ambernikki
What computer operating system are you running your Premiere Elements 11 on?
What are the properties of your source media that you have on that Expert workspace Timeline, especially when you are getting those low memory messages? You can get that information from a MediaInfo properties readout or we could try to figure that out from the brand/model of your camera and its settings.
http://mediaarea.net/en/MediaInfo
We need to find out such things as video and audio compression, frame size, frame rate, file extension, pixel aspect ratio, duration, etc.
What is the description of your computer from the point of view of installed/available RAM and free hard drive space. Have you set up the Scratch Discs (Edit Menu/Preferences/Scratch Disks)? Is your computer optimized..defragmented...etc. Often a run through of ccleaner helps for computer optimization. http://www.piriform.com/ccleaner
Have you used other versions of Premiere Elements or is Premiere Elements 11 your first experience with any very of Premiere Elements?
What is your intended export for the Timeline content that you are building?
Let us start here and then we can decide what next.
We will watch for your details and then we will troubleshooting strategy based on you report.
Thanks.
ATR
Thanks.
ATR

Macbook Running very slow lately

My Macbook Pro has been running very slow as of late. Takes awhile to open programs and often has the beach ball for just simple tasks. I ran an Entrecheck as well but not sure what most of it means or how to fix it:
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2010) (Verified)
MacBook Pro - model: MacBookPro7,1
1 2.4 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 320M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 6 days 11:9:29
Disk Information: ℹ️
Hitachi HTS545025B9SA02 disk0 : (250.06 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 249.20 GB (24.83 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R   UJ-898
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Logitech USB Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Parallels/Parallels Service.app
[not loaded] com.parallels.kext.prl_hid_hook (7.0 15098.770637) [Support]
[not loaded] com.parallels.kext.prl_hypervisor (7.0 15098.770637) [Support]
[not loaded] com.parallels.kext.prl_netbridge (7.0 15098.770637) [Support]
[not loaded] com.parallels.kext.prl_usb_connect (7.0 15098.770637) [Support]
[not loaded] com.parallels.kext.prl_vnic (7.0 15098.770637) [Support]
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.2) [Support]
[not loaded] com.motorola-mobility.driver.MotMobileUSB (1.2.2 - SDK 10.5) [Support]
/System/Library/Extensions/MotMobileUSB.kext/Contents/PlugIns
[not loaded] com.motorola-mobility.driver.MotMobileMS (1.0.0 - SDK 10.5) [Support]
[not loaded] com.motorola-mobility.driver.MotMobileMTP (1.2.2 - SDK 10.5) [Support]
[not loaded] com.motorola-mobility.driver.MotMobileUSBLAN (1.2.2 - SDK 10.5) [Support]
[not loaded] com.motorola-mobility.driver.MotMobileUSBLANMerge (1.2.2 - SDK 10.5) [Support]
[not loaded] com.motorola-mobility.driver.MotMobileUSBSwch (1.2.2 - SDK 10.5) [Support]
Startup Items: ℹ️
rEFItBlesser: Path: /Library/StartupItems/rEFItBlesser
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.cmfsyncagent.plist
[failed] com.apple.coreservices.appleid.authentication.plist [Details]
[failed] com.apple.EscrowSecurityAlert.plist [Details]
[failed] com.apple.gamed.plist
[failed] com.apple.pluginkit.pkd.plist [Details]
[failed] com.apple.printtool.agent.plist
[failed] com.apple.rcd.plist [Details]
[failed] com.apple.sbd.plist [Details]
[failed] com.apple.scopedbookmarkagent.xpc.plist
[failed] com.apple.security.cloudkeychainproxy.plist
[failed] com.apple.telephonyutilities.callservicesd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.AssetCacheLocatorService.plist [Details]
[failed] com.apple.ctkd.plist
[failed] com.apple.icloud.findmydeviced.plist
[failed] com.apple.nehelper.plist [Details]
[failed] com.apple.periodic-daily.plist [Details]
[failed] com.apple.periodic-weekly.plist [Details]
[failed] com.apple.security.syspolicy.plist
[failed] com.apple.softwareupdate_download_service.plist [Details]
[failed] com.apple.systemstats.analysis.plist [Details]
[failed] com.apple.wdhelper.plist
[failed] com.apple.xpc.smd.plist
Launch Agents: ℹ️
[running] com.flipvideo.FlipShare.AutoRun.plist [Support]
[loaded] com.motorola.MDMUpdater.plist [Support]
[running] com.motorola.motohelper.plist [Support]
[loaded] com.motorola.motohelperUpdater.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[invalid?] com.parallels.desktop.launch.plist [Support]
[loaded] com.parallels.DesktopControlAgent.plist [Support]
[running] com.parallels.vm.prl_pcproxy.plist [Support]
[invalid?] com.splashtop.streamer.SRServiceAgent.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[invalid?] com.motorola-mobility.mmcfgd.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
[running] com.parallels.desktop.launchdaemon.plist [Support]
[invalid?] com.splashtop.streamer.SRServiceDaemon.plist [Support]
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
[running] com.spotify.webhelper.plist [Support]
[loaded] com.valvesoftware.steamclean.plist [Support]
User Login Items: ℹ️
Flux Application (/Users/[redacted]/Applications/Flux.app)
Flux Application (/Users/[redacted]/Applications/Flux.app)
Spotify Application (/Applications/Spotify.app)
MotoCastUpdater UNKNOWNHidden (missing value)
MotoCast UNKNOWNHidden (missing value)
Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
Internet Plug-ins: ℹ️
DirectorShockwave: Version: 11.5.8r612 [Support]
Google Earth Web Plug-in: Version: 7.1 [Support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.4.2 [Support]
OfficeLiveBrowserPlugin: Version: 12.2.0 [Support]
Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
DivXBrowserPlugin: Version: 1.4 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
AdobePDFViewer: Version: 10.1.1 [Support]
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User internet Plug-ins: ℹ️
Unity Web Player: Version: UnityPlayer version 2.6.1f3 [Support]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Flip4Mac WMV [Support]
Java [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 249.20 GB Disk used: 224.37 GB
Destinations:
Time Machine Backups [Local]
Total size: 999.86 GB
Total number of backups: 3
Oldest backup: 2012-08-08 19:37:22 +0000
Last backup: 2014-06-10 21:33:26 +0000
Size of backup disk: Excellent
Backup size 999.86 GB > (Disk size 249.20 GB X 3)
Top Processes by CPU: ℹ️
      13% WindowServer
      5% fpsaud
      2% launchd
      1% prl_disp_service
      0% AppleSpell
Top Processes by Memory: ℹ️
120 MB Mail
112 MB Google Chrome
90 MB WindowServer
82 MB Google Chrome Helper
60 MB com.apple.WebKit.WebContent
Virtual Memory Information: ℹ️
34 MB Free RAM
932 MB Active RAM
918 MB Inactive RAM
809 MB Wired RAM
102.86 GB Page-ins
5.36 GB Page-outs
Diagnostics Information: ℹ️

In the actual situation you have much too low Ram (much to much PageOuts), and to little free space on your disk.
But that may be better after taking out some softwares:
1. in SystemPreferences->Users&Groups->LoginItems   remove all entries, with the minus sign underneath.
This does not uninstall anything but just prevents that these apps always run.
Then Restart, this should help already, but before you start any app, do following:
2. Uninstal the Android software it is not compatible and/or not necessary: lots of issues in Yosemite.
3. Stop using Chrome for the time being and (in case you do not want to use Safari) use either Firefox or Opera: both are fast and safe and are not resources eaters like Chome. I propose to uninstall Chrome.
4. I think that you did not install Java after the Yosemite install, but that it was already on your computer. You should search here (forum) for the install of the correct Java install (if you need it, otherwise disable it in the Applet).
5. I am not 100% sure but I seem to remember that Director Shockwave causes issue, so you could uninstall it.
6. Delete the AdobePDFViewer plugin from   MacintoshHD->Library->InternetPlug-ins.
7. Also the Valvesoftware Steamclean seems to cause issues in Yosemite. uninstall.
8. I am not familiar with motorola.moto, but it looks as if it is rather incompatible with Yosemite.
RESTART.
See if this helps.
Free up some space on the HDD, by hand !, do not use tools or cleaners !
If you do not see any better behaviour, start in the SafeMode, and see if you have the issues there also. If not we have to find some more culprits.
Lex

"Low Disk Space - You're running very low on Disk Space C:"

Similar Messages

Maybe you are looking for