Low display brightness on Satellite A200-14E

When i turn my notebook on the display brightness is very low (in bios, when windows boot and when windows XP work).
When i restart notebook his display brightness stand in normal mode, how i can resolve this problem?

Hi...
Sorry but i know english very bad and i can't answer on your question (i dont know necessary words)
but I can say - it's no "Fn key" problem, FN key work miscellaneous, on low brightness he raise little and when present high brightness he raise more!
This problem present in BIOS setup program too (no WINDOWS)! But when i restart notebook (ctrl+alt+del)
The display brightness stand in normal mode... and when i don't restart the notebook, windows is starting on low brightness mode too :(
And this happened on several NEW notebooks, that sent on guarantees.

Similar Messages

  • Satellite A200-14e: BSOD when using FN buttons

    Hey all and mind my english its not so well.
    Ok i have problem with my laptop its Satellite A200-14e and when i press FN button for toshiba flash cards it just pops BLUE screen and it shuts down my comp!!!
    ANY HELP IS WELCOME.!!!
    Thanks in advance.
    P.S. I already instaled new value aded pack and flash cards driver(thast when all problems started)

    Did you uninstall TVAP before installing the new TVAP?
    Did you install the A200-14E TVAP? Or TVAP from another model?
    ps. you can disable the Flashcards bar in the Flashcards utility under Start->Programs->TOSHIBA

  • Where can i find display driver for satellite A200 PCAECE Windows XP 32-bit

    Where can i find display driver for satellite A200 PCAECE Windows XP 32-bit? Help!!!!

    hi there,
    Most of the A200 series makes use of this video card chipset.
    [Intel(R) Graphics Media Accelerator Drive X3100|http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1670 732xml&sliceId=&dialogID=57594450&stateId=1%200%20 57598302]
    Hope this will help :)

  • Low screen brightness on Satellite Pro A200 psae1 with XP

    I installed XP Pro with sp2 on this laptop and now when i power up the screen is really dull, so i have to put it into stand by and then turn on again and then the screen is fine. What could cause such a problem? All drivers are latest release. Please help as i have rolled out 30 laptops to our users and all are giving out to me!!!!

    I wonder if you have tried to set the display brightness to the higher level by using the FN+F7 key combination.
    The FN+F6 or FN+F7 combination decreases or increases the display brightness
    Usually the installed Toshiba power saver controls the different power modes and the display brightness to save the battery power.
    I would recommend checking this button functionality

  • Can't install XP display driver on Satellite A200-27N

    Hi,
    i did install xp on my a200-27n, but when i try to install the dispaly diver http://support1.toshiba-tro.de/tedd-files2/0/display-20070809122620.zip, it give an message error that the ware is not validated for my computer
    pls i need help

    Have you read the installation instructions?
    You can find it also on the Toshiba website and list you should use as recommended installation order.
    Before you can install the display driver you must install:
    1 Windows XP
    2 Windows Updates
    3 Sun Java 2 Runtime Environment
    4 Intel ICH8M Chipset Utility
    5 Intel 965GM VGA Driver
    If you did do this and cant install the driver, install it manually. Go to the device manager => right click on the graphic card => update driver

  • Satellite A200 external display is blurred

    We have bought 5x satellite A200. After connecting it to any external display we get nothing but blurred picture.
    It's impossible to work on it.
    Our other notebooks P200 series work well on presented displays. We really do not know what to do with it. We tried to use Nvidia utility, WIndows utility, upgrading the drivers, switching the display via keyboard but we get the blurred picture in all cases.
    We are very satisfied with A200 performance, but the external picture is unusable. Would you recommend us a solution?
    Thank you!
    Filippi

    Hi
    Could you please post exactly name of the Satellite A200.
    Are these units delivered with an NVIDIA graphic card or with Intel card?
    In the nVidia control panel you can change the brightness and the contrast of the display.
    Im not 100% sure if you will be able to choose the external monitor but its worth a try.
    Go to the control panel -> nVidia -> Display -> Adjust desktop colour settings
    The new page should appear where you can adjust your colour settings.
    Check if the external monitor appears and choose it. Then you could change the position of the brightness and contrast control.

  • Gray display using S-video out on Satellite A200-24B

    Hello every one
    I have Toshiba Satellite A200-24B , provided with S-Video port,
    when i connect to my TV, at always display in Gray scale mode ( No colors )
    I tried to use other Cable and other TV, but still with the same problem.
    the cable i used is S-video to video (A V).
    anyone have an idea for this problem ????
    Thanks

    Hi
    There are different reasons why you get only a black/white picture on the TV.
    I had the same issue because I used a s-video-to-scart cable and the pin assignment didnt match with the TV port pin assignment.
    But the same cable worked in another TV.
    A second reason could be the wrong PAL/NTSC setting.
    Please check this!

  • Satellite A200 - Display driver stopped responding

    Periodically I see this warning: [http://s001.radikal.ru/i193/1002/2b/ee6a610aa864.jpg]
    It appears after short blackout by no reason. What is it?
    Satellite A200-1CR / Windows 7 Professional

    Hi createa,
    Have you tried reinstalling the display driver? I also dont know why this happens but theoretically this could solve the problem.
    You can download the latest version here:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
    Before you install the latest version I would recommend removing the old one first. Then restart your notebook and install the newest one.
    Good luck! :)

  • Is iphone 6 plus display brightness lower compared to iphone 6

    My iphone 6 plus display brightness is lower compared to iphone 6 at full brightness is it normal

    No.
    Apple specifies the same "brightness" for both models...500 cd/m2.
    You can read more here:
    http://www.displaymate.com/iPhone6_ShootOut.htm

  • Display of Satellite A200 does not switch on after 15 min inactivity!

    Hello!
    I have just purchased a Satellite A200 1-AX PSA6 and install Windows XP SP2 + upgrade bios for winxp.
    After 15 munutes of unactivirty (not pressing any keys or mouse move) I'm set in Power options in control panel - what Display must power OFF.
    After this time display is switches off (black)!
    But I'm can't wake up my notebook!
    I'm press any key or move mouse, but display is still black!
    But notebook work!
    I can ping then by network or connect by remote acceess!
    One way to solve this problem:
    Close and open notebook!
    A200 - in sleep mode and wake up with swithches ON display....

    Hello
    It seems that WXP does not work perfectly on new Vista designed notebooks. Before you live your notebook try to change profile in power settings (long battery life) and test the settings with this profile.
    Tomorrow I will try to install WXP on my A200 and I am really interesting if I will notice the same.

  • Re: Satellite A200-1AX - black image display and delay

    My Satellite A200-1AX is 3 weeks old and its LCD was replaced by Toshiba Center here in Kuwait because of defects.
    After placing the new LCD i have notice that whenever I am turning on and shutting the unit off, a delay of black image is being displayed and slowly disapperaing.
    Can you please tell me if this is normal in appearance just like what the technician in Toshiba Service Center is telling me?
    is there any problem with the installation of the new LCD?
    I find this thing as an abnormal display when booting and shutdown state of the unit.
    Hope you give sometime answering me and best regards.

    Thank you Jack Black for your immediate response. I really do't know what transpire to that problem and maybe you are correct that it has something to do with the replacement. The image i am noticing wherein the Technician in Toshiba Service Center here in Kuwait saying that it is normal which I contradict is similar to this scenario, let say you blew up air in a glass or window, you will notice some fog on it and suddenly the fog will gone away.
    That is how i describe the black image being display momentarily and and it is disapperaing very slowly which is not normal to compare with the laptop
    i am using now which is also toshiba and to all the computers which i had used.
    I am bothered with this and i suspect it might have some other problems after the replacement.
    Again thak you and hope you can still help me to sort out this problem.

  • Display of Satellite A200 is not working

    Hi
    I own a Satellite A200, since yesterday my display hasnt been working. I can hear vista booting up in the background but theres nothing on the monitor like when the system is switched off.
    plz help me..

    Hi
    Did you switch between the different displays devices?
    Using the FN+F5 you can switch to the external monitor or TV maybe you have used this key combination accidentally?
    So it would be also advisable to connect another external monitor to the notebook to check if anything would be displayed on the monitor
    If you will not see anything on the second monitor then a display fault could be possible.
    The A200 is not very old notebook series I think the warranty should be valid. Therefore you could contact the ASP in your country for and notebook check.
    Good luck and greetings mate

  • Satellite A200 - Display goes off for no reason

    I've a Satellite A200-E530D running Windows Vista Home Premium. For the past month, i've had something strange happening to my computer, soon after boot up, the display goes off. for no good reason! the only option i have is to hard boot the system and everythings fine...though a couple of times after restarting it again went off.
    I've tried updating to the latest display drivers (I have a Nvidia Geforce 7300 Go graphics with a 128 MB of VRAM)
    Another strange thing, Vista SP1 doesn't install on my machine. tried uninstalling my Anti virus, but that hasnt helped either.
    Can anybody shed some light on my dark display?

    im hoping its not a failing inverter board. hardware support where i come from (India) costs a bomb, and for a laptop, its a hell of a lot more than a bomb.
    i dont think its a failing inverter board though...shouldnt the board fail regularly while im using it then? the fact that my display switches off (and dude, it switches OFF completely, no backlight at all. my laptop responds only to a hard boot in the @$$) right after i switch on my computer points to a software malfunction. because, afterwards, my PC works just fine for the the next seven or eight hours that i use it for.
    im guessing there something wrong with the way the drivers are loading up...or something.
    maybe i should change the power options? i've configured the screen to switch off after a period of 1 min of no activity. and my laptops start up time (from the time i log in, to the time the little windows hourglass sign disappears) can be a little longer than a minute. is it possible that theres something wrong going on there?
    like i said, im at my wits' end!

  • Satellite A200-24B (PSAE6) - display hangs when the pictures are zoomed

    Dear Sirs, I can't believe that ther is no solution for the product you produce. Like my Toshiba that I bought 14 months ago and trying to fix it. I have a problem with my Display Card "ATI Mobility Radeon HD 2600" when I view pictures with Windows Photo Gallery and trying to zoom it ... the display screen will hang and go with black and red blocks!
    I tried to install all kinds of windows (XP - Vista from basic to ultimate). I tried to download all versions of catalyst from version 6 to 9.7. so what is going on!!!!
    Do you know that most of my friends and people hated the brand Toshiba because of this bad reputation in the market ... keep in mind that Toshiba laptops with Nvidia graphic card doesn't have the same problem. please please please help me!
    Your prompt response will be highly appreciated.
    Sincerely,

    Dear Lars_3,
    First of all I want to thank you for your support. But I've tried all what you said, to the point that I downloaded CCC version 9.8 and still have the same problem, even the latest bios version!!!.
    FYI I advised my friend to buy the same laptop "Toshiba A200-24B" because it had the best specifications that days. He is facing the same problem too!!!!! I believe this edition of laptop was very bad. Any way in this case I have to go and fight with the service center in my country that is responsible to repair it. Because I have three years warranty. So I am going to abuse it ;-)
    If you can do any further help please tell me. I don't know how to attach a file if possible to show you my system information that may help in finding my problem!
    So I am copied and pasted this information as follows:
    System Information
    Time of this report: 9/1/2009, 02:04:31
    Machine name: TORNADONINO-PC
    Operating System: Windows Vista Home Premium (6.0, Build 6002) Service Pack 2 (6002.lh_sp2rtm.090410-1830)
    Language: Arabic (Regional Setting: English)
    System Manufacturer: TOSHIBA
    System Model: Satellite A200
    BIOS: Ver 1.00PARTTBL
    Processor: Intel(R) Core(TM)2 Duo CPU T5750 @ 2.00GHz (2 CPUs), ~2.0GHz
    Memory: 3070MB RAM
    Page File: 1212MB used, 5127MB available
    Windows Dir: C:\Windows
    DirectX Version: DirectX 10
    DX Setup Parameters: Not found
    DxDiag Version: 6.00.6001.18000 32bit Unicode
    DxDiag Notes
    Display Tab 1: No problems found.
    Sound Tab 1: No problems found.
    Sound Tab 2: No problems found.
    Input Tab: No problems found.
    DirectX Debug Levels
    Direct3D: 0/4 (retail)
    DirectDraw: 0/4 (retail)
    DirectInput: 0/5 (retail)
    DirectMusic: 0/5 (retail)
    DirectPlay: 0/9 (retail)
    DirectSound: 0/5 (retail)
    DirectShow: 0/6 (retail)
    Display Devices
    Card name: ATI Mobility Radeon HD 2600
    Manufacturer: ATI Technologies Inc.
    Chip type: ATI Radeon Graphics Processor (0x9581)
    DAC type: Internal DAC(400MHz)
    Device Key: Enum\PCI\VEN_1002&DEV_9581&SUBSYS_FF001179&REV_00
    Display Memory: 1523 MB
    Dedicated Memory: 244 MB
    Shared Memory: 1279 MB
    Current Mode: 1280 x 800 (32 bit) (60Hz)
    Monitor: Generic PnP Monitor
    Driver Name: atiumdag.dll,atiumdva.dat,atitmmxx.dll
    Driver Version: 7.14.0010.0540 (English)
    DDI Version: 10
    Driver Attributes: Final Retail
    Driver Date/Size: 11/2/2007 00:56:20, 3078144 bytes
    WHQL Logo'd: Yes
    WHQL Date Stamp:
    Device Identifier: {D7B71EE2-D6C1-11CF-D570-0ADFA1C2CA35}
    Vendor ID: 0x1002
    Device ID: 0x9581
    SubSys ID: 0xFF001179
    Revision ID: 0x0000
    Revision ID: 0x0000
    Video Accel: ModeMPEG2_A ModeMPEG2_C
    Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
    {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
    {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
    {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
    {3C5323C1-6FB7-44F5-9081-056BF2EE449D}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
    {552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
    {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
    {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
    DDraw Status: Enabled
    D3D Status: Enabled
    AGP Status: Enabled
    thanking you again

  • Satellite A200-25Z: trouble with display driver

    Hi,
    I'm trying to install WIN XP on a A200 25Z. At first all seemed to work fine but now I constantly get a bluescreen before xp loaded completeley saying something like memory problem on ati2mtag.dll driver
    Sometimes, it does start but then when I have to restart next time it won't start up again...
    I've reinstalled xp now several times, updatet the bios to the xp version but still the problem stays the same.
    Anyone else had a similar experience like that?
    Best

    > The problem is now, at first it seemed to work. But about two weeks later after I installed a game the next restart came up with a blue screen. The game itself didn't have any problems. Just the next restart. And since then whatever I try doesnt really help it.
    It looks like the error with you graphic driver appears only after the installation of the game. For me it sounds like a compatibility issue with graphic driver and the installed game.
    I have noticed that some other notebook series use the same graphic card Mobility Radeon X2600.
    So try to use the ATI graphic driver from Toshiba European driver page:
    Satego P200 PSPBBE
    Equium A200 PSAE8E
    Equium A210 PSAENE
    Satellite A200 PSAE6E
    Satellite A210 PSAELE
    Satellite P200 PSPB6E
    Satellite P200D PSPBQE
    Satellite Pro A200 PSAE7E
    Satellite Pro P200 PSPB7E
    Bye

Maybe you are looking for