Low end Apple supported printer
Since I could not find a driver for my Dell V305 printer, can anyone recommend a low end all in one printer that will work with OS X 10.6.1?
golfer man
Dell does not actually manufacture printers. They are re-badged printers from other makers. So it is possible that the other printer's driver will work.
A Google search on "Dell V305 Mac" suggests that it is actually the same printer as a Lexmark X4650. So you might try selecting that printer driver, if it is already installed, or going to the Lexmark support web site to download the Mac driver for it.
Similar Messages
-
Why won't Apple support printing to mobile 3 rd party printers
Why won't Apple support printing to mobile 3 rd party printers
It's up to the printer manufacturer to provide an app for printing from. Many do, and any support AirPrint which is what iOS devices use for printing.
It's not Apple's job to create printer drivers for every third party printer on the market. Printer manufacturers provide drivers with their products. -
Why does Apple support print those "Hello" booklets that came with my new iMac in super small fonts?
Yesterday I purchased the latest available 27inch iMac from my local Apple only dealer. ( It sure beats my very first Mac which was an LC520. )
The included in the box printed quick start guide named "Hello" was printed using a font size very close to zero.
Who are these people at Apple support that can read such small fonts with using 20X powered magnifying lenses
Are they somewhat...
What a waste of mony Apple!I think it's a point worth making. It is virtually unreadable.
On reflection, I'm wondering if there is an obligation in some countries to provide such information with a device. This could be Apple's way of complying while spending the absolute minimum. -
This happened all of a sudden. Was it in response to a O/S 10 update? The download from the Apple icon does not show a software update is needed; so a new driver is not there. The download at the Apple Support site for HP printers downloads and seems to install until the end, when it says my device an HP C3180 cannot be found. Can anyone help?
lyndag,
This article may help out with the issue you are having. Give the steps a shot:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00836418&tmp_task=solveCate gory&cc=us&dlc=en&lang=en&lc=en&product=1146331#N6576
If the issue persists: Can you provide screenshots of the error? Is this wireless/usb/ethernet install?
Best of Luck!
I work with HP but my posts and opinions are my own. -
will itunes 11 work with windows xp , I have ended up with this new version after accepting an update and now although I can view my library I can't play anything and since synching my ipod it is empty. Apple support can't seem to get it's head around the fact I'm on a PC keeps asking for an apple serial number, Help!!!
Morning gedeye,
Thanks for using Apple Support Communities.
System Requirements
Windows XP Service Pack 2 or later
32-bit editions of Windows Vista or
32-bit editions of Windows 7, and Windows 8
For more information on this, take a look at this article:
http://support.apple.com/kb/DL1614
Best of luck,
Mario -
HP Officejet Pro 8500 Wireless prints slow with lion. One page every 1.5 to 2 min. Apple support and HP no help. Any suggestions?
Although printer is wireless capable I have it connected directly to iMac via USB to help with speed. I just completed resetting printer and reinstalling to no avail, still approx 2 min to print one page.
-
i got an iphone. when ive insert my sim card in it, it sat sim not valid. at the end its mentioned please contact apple support. can you help me?
Your phone is probably carrier locked and you are using a SIM form a different carrier. Are you?
-
my ipod is not responding. It is giving a message pleases wait low battery and showing me a link to apple support
Hey,
Welcome to Apple Support Communities.
Well leave it for few minutes then try plugging it to the charger, if that does not work. Try restoring it from revious backup. This will change the software and hopefully earase the error. If that did not fix it i guess you need to take it to the Store for a check.
I really hope this helps you. Let me know if it does. If not feel free to give me a shout. Best of luck. -
The song I downloaded (Slayer, Criminally Isane) cuts off about 3 seconds before the ending, I have tried re-downloding per apple support directions with the same results. What further actions may I take to fix this issue?
I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item. -
I have just upgraded from MAVERICKS to YOSEMITE OS 10.10. I have 4GB of memory.
Since upgrading my ageing EPSON CX3600 will no longer print. I get the error message ;COMMUNICATION ERROR.
Apple support gave me advice which hasn't worked including deleting the printer via system preferences and rhen restoring it after rebooting the system
Any ideas please.Epson Stylus CX3600
Epson Stylus CX3600 : Drivers & Software
There is also a driver for it at
Gutenprint for Mac OS X -
How come I can print off the Apple support page but not of my note book i n documents.
How come I can print off the Apple support page but not off of note pad in my documents.
No. It is not free unless the phone was originally purchased less than 90 days ago or you have an active AppleCare agreement.
Where did you get the phone? This is almost always a symptom of a phone that was hacked or jailbroken to unlock it. -
Just upgraded to snow leopard, downloader apple support drivers for canon mp620. Why won't a printer list display in add printer window?
Assuming the MP620 is connected to your wireless network, then there are two components to this device - the printer and the scanner. The printer uses Canon proprietary software while the scanner is supported by Apple's Bonjour service. So in many cases, you will at least see the scanner, shown as Bonjour Scanner in the Kind column, while the printer can take longer to appear and is shown as canonijnetwork in the Kind column. If you cannot see either then you have a network issue. Try turning off the MP620 for a minute and then turning back on. Then see if the scanner / printer component appears in the Add Printer window. If you still don't see either, then confirm the MP and the Mac are using the same network. If you know the MP's IP address you can use Network Utility to Ping the address. You can also enable Bonjour Bookmarks in Safari preferences and when selected, the MP620 should appear.
-
I was on the apple support site and typed my question in the small box at the bottom but couldn't figure out how to send it. The person at the other end couldn't read what I typed. I have a new OS10.8.4 and can't find "empty cache" when I'm ready to close Safari. How do I do this? Thanks
https://discussions.apple.com/thread/4448839
-
HT4882 Apple Support Update: No longer an option to Automatically illuminate keyboard in low light.
This Apple Support page appears to be outdated:
http://support.apple.com/kb/HT4882
My Mid 2012 MacBook Pro has no option to Automatically illuminate keyboard in low light.
The option now offered, Adjust keyboard brightness in low light, does not enable the keyboard backlight to be completely turned off.
The ability to completely turn off keyboard backlighting should be an option, Apple -- get on it, please. Every little bit of energy which users can opt to save will extend charge duration and battery life, and thus should be provided.
Also, in certain situations, I want less light, and the light from the keyboard is at those times a cause of light pollution and distraction.
Message was edited by: AdamsFruit to include image.I've found an answer to my question about how to turn off the keyboard backlighting on the mid 2012 MacBook Pro 13":
The F5 function key's primary function is as the Keyboard Backlight Dimmer, and can dim keyboard backlighting all the way to nothing. (F6 is Keyboard Backlight Brightener).
Nonetheless, This Apple Support page is still incorrect:
http://support.apple.com/kb/HT4882 -
So here is what I found and what I did to try to alleviate the RAM eating upgrade named Yosemite. This guy has helped quite a few people, you can read all the comments and I gave it several tries this morning.
Oct 23, 2014 10:59 AM
I post this hoping to help those users who, like me, are experiencing high CPU usage and massive memory leaking with OS X core services and apps, leading to slow performance and battery drain.
I've tried everything mentioned, but found the right combination of steps to follow. I've tried this with seven different Apple computers, including mine, and has worked well so far. I applied this method yesterday to give these process a 24 hour window to fail again, so far everything good.
First step: disconnect any external or secondary monitors, if any is present. The video memory allocation leak can also happen if you have a system with an integrated card, like Intel, with no external monitors attached.
Second step: Shut down your machine and enter Safe Mode (press shift once you turn on your computer again, more info below). Once you're there, fix your disk permissions.
Guide of how to access Safe Mode: OS X: What is Safe Boot, Safe Mode?
Third step: From Safe Mode turn off your machine again and reset your System Management Controller (SMC). There are different methods, depending on machine, to do this. To know what method applies to yours read the following guide.
Intel-based Macs: Resetting the System Management Controller (SMC)
Fourth step: Once your machine completes a full boot after resetting the SMC turn it off again and reset your PRAM (THIS IS THE MOST IMPORTANT STEP, BUT THE PREVIOUS ONES ARE ESSENTIAL FOR THIS ONE TO WORK). The PRAM stores small bits of data that indicate our Apple computer how to interact with the devices connected to it, including monitors and video cards. It also affects software.
To reset it you should hold the OPTION, COMMAND, P and R keys in your keyboard immediately after turning on your machine again.You'll hear the start up chime, continue pressing the keys until the machine boots and the chime starts A SECOND TIME, then release. IF YOUR YOSEMITE INSTALLATION LOCKS UP AT A BLACK SCREEN AFTER THIS, DONT PANIC! It's normal, just turn off your computer and let it boot again.
More info about PRAM: OS X Mavericks: Reset your computer’s PRAM
Voila, reconnect your external displays and enjoy your system.
Message was edited by: Luis_Mercado
MacBook Air, OS X Yosemite (10.10)
So here is my EtreCheck report that is a bit above my head but anything in red isn't good I'm sure. I'd really appreciate some friendly advice
EtreCheck version: 2.0.11 (98)
Report generated at
Hardware Information: ℹ️
iMac (24-inch Mid 2007) (Verified)
iMac - model: iMac7,1
1 2.4 GHz Intel Core 2 Duo CPU: 2-core
6 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR2 SDRAM 667 MHz ok
BANK 1/DIMM1
2 GB DDR2 SDRAM 667 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI,RadeonHD2600 - VRAM: 256 MB
iMac 1920 x 1200
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 2:34:25
Disk Information: ℹ️
WDC WD3200AAJS-40RYA0 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Data (disk0s2) / [Startup]: 319.21 GB (230.04 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
VIA Labs, Inc. USB2.0 Hub
Generic USB Storage
Western Digital My Passport 0824 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
Passport Slim (disk2s2) /Volumes/Passport Slim : 2.00 TB (1.62 TB free)
VIA Labs, Inc. USB2.0 Hub
Apple Inc. Built-in iSight
Apple Inc. Bluetooth USB Host Controller
Logitech USB Receiver
Apple Computer, Inc. IR Receiver
Firewire Information: ℹ️
WD Passport III 800mbit - 800mbit max
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted> : 210 MB
Passport (disk1s2) /Volumes/Passport : 499.76 GB (370.05 GB free)
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Library/Extensions
[not loaded] com.lge.driver.LGAndroidmdmcontrol (4.15 - SDK 10.10) Support
[not loaded] com.lge.driver.LGAndroidmdmdata (4.15 - SDK 10.10) Support
[not loaded] com.lge.driver.LGAndroidndiscontrol (4.15 - SDK 10.10) Support
[not loaded] com.lge.driver.LGAndroidndisdata (4.15 - SDK 10.10) Support
[not loaded] com.lge.driver.LGAndroidrndis (4.15 - SDK 10.10) Support
[not loaded] com.lge.driver.LGAndroidserial (4.15 - SDK 10.10) Support
[not loaded] com.lge.driver.LGAndroidusbbus (4.15 - SDK 10.10) Support
/System/Library/Extensions
[not loaded] com.devguru.driver.SamsungComposite (1.4.26 - SDK 10.6) Support
[not loaded] com.markspace.iokit.IOMissingSyncMassStorage (199) Support
[not loaded] com.markspace.missingsync.palmos.classicseize (1) Support
[not loaded] com.microsoft.driver.MicrosoftKeyboard (6.3) Support
[not loaded] com.microsoft.driver.MicrosoftMouse (8.2) Support
[not loaded] com.palm.ClassicNotSeizeDriver (3.2.1) Support
[loaded] com.wdc.driver.1394.64.10.9 (1.0.1 - SDK 10.9) Support
[not loaded] com.wdc.driver.1394HP (1.0.5) Support
[loaded] com.wdc.driver.USB.64.10.9 (1.0.1 - SDK 10.9) Support
[not loaded] com.wdc.driver.USBHP (1.0.1) Support
/System/Library/Extensions/MicrosoftKeyboard.kext/Contents/PlugIns
[not loaded] com.microsoft.driver.MicrosoftKeyboardBluetooth (6.3) Support
[not loaded] com.microsoft.driver.MicrosoftKeyboardUSB (6.3) Support
/System/Library/Extensions/MicrosoftMouse.kext/Contents/PlugIns
[not loaded] com.microsoft.driver.MicrosoftMouseBluetooth (8.2) Support
[not loaded] com.microsoft.driver.MicrosoftMouseUSB (8.2) Support
/System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.SamsungACMControl (1.4.26 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungACMData (1.4.26 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungMTP (1.4.26 - SDK 10.5) Support
[not loaded] com.devguru.driver.SamsungSerial (1.4.26 - SDK 10.6) Support
Startup Items: ℹ️
Cocktail: Path: /Library/StartupItems/Cocktail
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Agents: ℹ️
[failed] com.apple.security.cloudkeychainproxy.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.ctkd.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.nsurlsessiond.plist
[failed] com.apple.softwareupdated.plist
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist Support
[loaded] com.hp.help.tocgenerator.plist Support
[not loaded] com.maintain.LogOut.plist Support
[loaded] com.maintain.PurgeInactiveMemory.plist Support
[not loaded] com.maintain.Restart.plist Support
[not loaded] com.maintain.ShutDown.plist Support
[not loaded] com.maintain.Sleep.plist Support
[running] com.maintain.SystemEvents.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[invalid?] com.tvmobili.artwork.plist Support
[running] com.wdc.raidmanagerstatusmenu.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.bjango.istatserver.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.hp.lightscribe.plist Support
[loaded] com.maintain.CocktailScheduler.plist Support
[loaded] com.maintain.HideSpotlightMenuBarIcon.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[invalid?] com.tvmobili.tvmobilisvcd.plist Support
[running] com.wdc.WDRAIDDriveService.plist Support
[loaded] com.westerndigital.WD-Drive-Manager-Installer.plist Support
[loaded] net.freemacsoft.LiteIcon.LIHelperTool.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.maintain.ShowUserLibraryDirectory.plist Support
[loaded] uk.co.markallan.clamxav.freshclam.plist Support
User Login Items: ℹ️
Macs Fan Control Application (/Applications/Macs Fan Control.app)
Solar Service Application (/Users/[redacted]/Library/Application Support/Logitech/SolarService/Solar Service.app)
Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
WDDriveUtilityHelper Application (/Applications/WD Drive Utilities.app/Contents/WDDriveUtilityHelper.app)
WD Quick View UNKNOWN (missing value)
Internet Plug-ins: ℹ️
Unity Web Player: Version: UnityPlayer version 2.0.2f2 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.2.4 Support
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
RealPlayer Plugin: Version: Unknown
Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
DivXBrowserPlugin: Version: 1.4 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
AdobePDFViewer: Version: 9.5.5 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
3rd Party Preference Panes: ℹ️
Flash Player Support
Java Support
Microsoft Mouse Support
MusicManager Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Data: Disk size: 319.21 GB Disk used: 89.17 GB
Destinations:
Passport [Local]
Total size: 499.76 GB
Total number of backups: 25
Oldest backup: 2014-05-10 16:56:40 +0000
Last backup: 2014-11-14 17:38:44 +0000
Size of backup disk: Adequate
Backup size 499.76 GB > (Disk used 89.17 GB X 3)
Top Processes by CPU: ℹ️
3% WindowServer
1% Google Chrome Canary
1% coreaudiod
0% systemstatsd
0% ps
Top Processes by Memory: ℹ️
174 MB Google Chrome Canary
84 MB Google Chrome Helper
64 MB mds_stores
52 MB Finder
45 MB iconservicesagent
Virtual Memory Information: ℹ️
3.02 GB Free RAM
1.69 GB Active RAM
317 MB Inactive RAM
753 MB Wired RAM
8.69 GB Page-ins
156 MB Page-outs
I hope to hear from anyone even to knock me in the head, lol. Thanks in advance and I'll be around trying to figure this out.1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.FolderActions.folders com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 461455494 3627668074 1083382502 1274181950 1855907737 1848501757 464843899 3694147963 1417519526 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 3301885676 891055588 998894468 695903914 4136085286 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' 's/^.+: //p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e sysctl\ -n pluginkit sudo\ smcDiagnose );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|Roame|SMC:|suhel| VALI|ver-r|xpma' -o -o -k Sender fseventsd -k Message Req SL -o -k Sender Req launchd -k Message Req de: " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D13 40 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 38 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 39 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.
Maybe you are looking for
-
Crystal Reports: How to change Oracle OLE DB server at runtime
Post Author: dvlasman CA Forum: Data Connectivity and SQL I'm using a rpt made with Crystal Reports 8.0.1 and VB 6. The report was made using the Microsoft OLE DB provider for Oracle. What I want to do is change to Oracle server / database the report
-
I have a 3GS. The iPod on the phone has made duplicates of some songs. I've tried using the "get info" dialog box to set all the information the same but the dups are still there. Even after erasing all music with iTunes, iTunes is empty but they are
-
Activation key Creative Cloud 2014
Hi I got the orginal key for creative cloud, but when i use the package i only see trials for 30 days. How do i activate it?
-
Since last month, when I try to use iTunes to sync apps or settings with my iPhone, there is an error (message : AppleMobileDeviceHelper has encountered a problem and needs to close. We are sorry for the inconvenience) showing very frequently and it
-
I have a teenager that I trust and love dearly. However, I also understand that they can do things that their parents may not always want them to do. I am suspicious that he is looking at adult sites. He is rather computer-smart so a basic check the